1 NSN LTC

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.

                                          NO SOLICITATION IS BEING ISSUED AT THIS TIME.  

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.  Phone 614 692-0639. We thank you in advance for your assistance.

NSN                                        NAME                                                  

2530-00-856-2299              WHEEL, METAL TIRE

Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.

ITEM DESCRIPTION

NSN: 2530-00-856-2299

WHEEL, METAL TIRE

RP001:

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ032: EXPORT CONTROL OF TECHNICAL DATA

     This item has technical data some or all of which is subject to

     export-control of either the International Traffic in Arms regulations

     (ITAR) or the Export Administration Regulations (EAR), and cannot be

     exported without prior authorization from either the Department of State

     or the Department of Commerce. Export includes disclosure of technical

     data to foreign persons and nationals whether located in the United

     States or abroad. This requirement applies equally to foreign national

     employees and U.S. companies and their foreign subsidiaries. DFARS

     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control

     technical data to DLA contractors that have an approved US/Canada Joint

     Certification Program (JCP) certification, have completed the

     Introduction to Proper Handling of DOD Export-Controlled Technical Data

     Training and the DLA Export-Controlled Technical Data Questionnaire

     (both are available at the web address given below), and have been

     approved by the DLA controlling authority to access the

     export-controlled data. Instructions for obtaining access to the

     export-controlled data can be found at:

     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed

     for use are required to have an approved JCP certification and have

     been approved by the DLA controlling authority to access

     export-controlled data managed by DLA. DLA will not delay award in

     order for an offeror or its supplier to apply for and receive approval

     by the DLA controlling authority to access the export-controlled data.

RD002:

COVERED DEFENSE INFORMATION APPLIES

ZD003:

     A metal casting process was identified as a means to manufacture this

     item.   Tooling is required to produce a casting.  For sourcing,

     tooling, materials or other information, please contact the appropriate

     assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land

     & Maritime Supply Chains) DSCC.cast.forge@dla.mil

RA001:

    THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002:

     CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009:

     INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011:

     REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ001:

     HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

     NON-MANUFACTURERS)

RQ016:

     COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

     LISTS (QML).  THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

     SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

     QUALIFIED MANUFACTURERS LIST (QML).  QUALIFICATION REQUIREMENTS IN

     PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

     MANUFACTURERS LIST (QML)" APPLY.

ZD087:

     THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

     REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

     QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

     QPL(S)/QML(S).

CS187:

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

     USED NOR INCORPORATED IN ANY ITEMS TO BE

     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

     SPECIFICATION REQUIREMENTS.

    

CA070:

FULL AND OPEN COMPETITION APPLY

CRITICAL APPLICATION ITEM

     IAW BASIC DRAWING NR 19207 10907799

     REVISION NR H   DTD 11/22/1993

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12369930

     REVISION NR B   DTD 05/15/1990

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12369003

     REVISION NR H   DTD 09/24/2018

     PART PIECE NUMBER:

     IAW REFERENCE QAP 19207 10907799

     REVISION NR G   DTD 11/22/1993

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 10907799

     REVISION NR     DTD 01/07/2020

     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

     QUP:001  PRES MTHD:20  CLNG/DRY:1  PRESV MAT:49

     WRAP MAT:GC  CUSH/DUNN MAT:JC  CUSH/DUNN THKNESS:B

     UNIT CONT:ED  OPI:M

     PACK CODE = Q: PACKING LEVEL = B:

     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

     ZZ - ADDITIONAL SPECIAL MARKING:

     CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED

     PER MIL-STD-129, PARAGRAPH 5.4.1.6 (PROTECTED

     CARGO): THE ITEM DESCRIPTION (NOMENCLATURE)

     SHALL BE OMITTED FROM THE MIL-STD-129 LABEL

     FOR ALL SHIPPING CONTAINERS.

     40 - OMISSION OF MARKING FOR SENSITIVE,

     CONTROLLED, OR PILFERABLE ITEMS PER

     MIL-STD-12.

IP025:

     PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS