This is a Questions and Answers (Q&A) document that clarifies technical specifications for fiber optic cable and related communication equipment required under FEMA Region 1's solicitation for Fiber Optic Cable & Wires (WX03406Y2026T). The document addresses detailed requirements for a 24-fiber OM4 multimode armored cable with dual LC duplex connectors (UPC termination type, pre-terminated on both ends) that must be gel-filled, armored, and rated for underground/outdoor use. The cable requires a pulling eye with protective sock and must break out into 12 transmit and receive pairs at each end, connected to a standard LC 19-inch rack mountable patch panel, with specified fiber polarity ensuring pair-to-pair matching across termination points. Additionally, the Q&A specifies requirements for an 18/6C shielded communication cable with tinned copper stranded conductors, underground gel material insulation, white jacket color (or alternative options if unavailable), and a 300V voltage rating. The document also references DMP 3012 clip-on tamper switches (normally closed) as required components. These specifications support the delivery of supplies to 63 Old Marlboro Road, Maynard, MA 01754, with a proposal deadline of August 6, 2026 at 4:00 PM ET and a delivery requirement within 90 days of contract award.
Federal Emergency Management Agency