WX Station Processing Board Rev D SOW 4-25-2023.docx

3/1/17 Rev A

STATEMENT OF WORK

for the ARSR-4 Weather Station Replacement Processing Board Rev D.

April 25, 2023

Federal Aviation Administration Mike Monroney Aeronautical Center 6500 S. MacArthur Blvd.

Oklahoma City, OK 73169 introduction Background This statement of work (SOW) is for the procurement and fabrication of a new Weather Station Processing Board for use in the FAA’s ARSR-4 Long Range Radar. The current weather station the ARSR-4 uses for height calculation is now obsolete. AJW-142 is looking to procure Weather Station Processing Boards to interact with the new weather stations that will be installed at all ARSR-4 facilities. The Weather Station Processing Board will interact with the new Weather Stations that the FAA has already procured. This new Weather Station will be installed at all ARSR-4 facilities to meet the minimum requirements of the ARSR-4 height algorithm. Under this contract, PCB boards and components Weather Station Processing Board will be procured. Weather Station Processing Boards will be delivered to the following address:

MMAC / AJW-142

6500 S. MACARTHUR BLVD, BLDG 227

OKLAHOMA CITY, OK 73169

MARK FOR: Joseph Gerba (FAA 405.954.0285)

Purpose This Statement of Work (SOW) describes the tasks the Contractor shall perform for the manufacturing, production, test, and delivery of the ARSR-4 Weather Station Processing Boards for these radars according to the requirements.

Scope This SOW defines the tasks involved for producing the ARSR-4 Weather Station Processing Boards for all of the ARSR-4 systems. These include:

a) Procure and/or manufacture all individual parts, materials, and equipment needed to produce the design;

b) Assemble, manufacture, and produce the design;

c) Ship completed units;

d) Support any issues during the manufacturing and procuring process, such as obsolete or unavailable parts;

All deliverable documentation shall be in editable form. Formats shall include, but are not limited to, Microsoft Office products, Hypertext Markup Language (HTML), and Extensible Markup Language (XML). There shall not be links to documents in Portable Document Format (PDF) without Government approval.

Definitions All reference to the “Government” in this SOW shall mean by authority of the Contracting Officer or designee. Reference to Government approval shall be limited to the Contracting Officer and his/her Technical Representative. The term software, as used in this SOW, refers to any code developed or otherwise used, including the code for firmware and all support files (e.g., library files, project files, test development software, etc.) needed for editing/making changes for future modifications.

Any reference to the Weather Station Processing Board in this SOW shall mean all systems, components, wiring, and cabling that comprise a kit for one radar site installation. Each Weather Processing board is comprised of a Printed Circuit Board and its respective components soldered onto the board.

Quantities This contract is to provide 70 Weather Station Processing Boards. Each Weather Processing board is comprised of a Printed Circuit Board and its respective components soldered onto the board.

applicable documents The following specifications, handbooks, orders, standards, and drawings form a part of this SOW and are applicable to the extent specified herein. The design presented was designed according to these specifications and as delivered conforms to all applicable sections and regulations.

FAA Specifications None FAA Standards None Military Standards MIL-HDBK-454A General Guidelines for Electronic Equipment Other FAA Documents

· WeatherStation_RevD_360_1008.zip (Gerber files for PCB board production)

· WXStationRevD_BOM.xlsx (Bill of Materials for the Weather Station Processing Board) Non-Government Documents None system requirements The Contractor must perform the effort described in this SOW and must comply with all of the requirements set forth herein. The Contractor must deliver all data described in this SOW.

General Requirements The FAA will provide a quantity of 70 of part number XC7A35T-1FGG484C (ARTIX7 FPGA) when the contract is awarded.

The vendor will provide all other parts, manufacturing, and assembly for the Weather Station Processing Board (FAA Board Number 360.1008). The vendor must get email approval for any part changes or substitutions from the Contracting Officer. The files for production are in the zip file:

WeatherStation_RevD_360_1008.zip The Bill of Materials for the PCB is in WXStationRevD_BOM.xlsx.

The Vendor should be open when communicating any lead times for parts and an expected delivery date on contract award.

support The Contractor shall perform the tasks in the following subsections.

COTS Manuals and Documentation

The Contractor shall retain all vendor-produced COTS documentation supplied with individual COTS items delivered under this contract. The Contractor shall deliver all retained COTS documentation with each weather station.

ACRONYMS AND ABBREVIATIONS

image1.wmf