work_description.pdf

Statement of Work

Bureau of Land Management, Idaho Falls District seeks to purchase a 4-Wheel Drive Loader with attachments. This Loader will replace the JD 555G. The JD 555G has met its life cycle replacement of 33 years. The front-end loader plays a vital role in filling agency mission to provide safe access to public lands.

The purchase of the loader will help meet the requirement to maintain safe and reliable public access to federal lands. Without this piece of equipment, we are unable to meet its mandate to provide public access & maintain the infrastructure safely & efficiently.

Evaluation criteria will include but not limited to:

• Dealer support and parts availability within 50 miles of Idaho Falls, Idaho

Specifications for 4-Wheel Drive Loader:

Provide Cat 926 4-Wheel Drive Loader or equal

Machine equipped with the following:

OPERATOR ENVIRONMENT:

• 75 mm (3 in) retractable seatbelt

• Automatic temperature control

• Cab, enclosed ROPS/FOPS pressurized, and sound suppressed

• Push to Start / Push Start Passcode security

• 8 Inch Touch Screen

• Jog Dial with screen control

• Programmable Joystick

• Cup holders

• AIR CONDITIONING, R134A REF

• External mirrors with lower parabolic

• Ground level cab door release

• Hydraulic control lockout

• Interior cab lighting, door

• Lunch box storage

• Operator Not Present system

• Radio ready speakers

• Rear window defrost, electric

• Seat mounted electronic implement controls, adjustable

• Sliding glass on side window

• Column mounted multi-function control lights, wipers, turn signal

• Suspension seat, fabric

• Tilt steering wheel

• Tinted front glass

• Wet arm wiper/washer, 2-speed and intermittent, front

• Wet arm wiper washer, rear

• Mounting Provision

• Digital hour meter, odometer and tachometer

• Digital ground speedometer and direction indicator

• Engine coolant temperature gauge

• Fuel and diesel exhaust fluid levels

• Hydraulic oil temperature gauge

POWER TRAIN:

• Industrial Diesel Engine is offered in ratings from 129-225 kW (172-302 hp) @ 2200 rpm and meets U.S. EPA Tier 4 Final, EU Stage V emission standards.

• Differential, limited slip, rear

• Auto idle shut down feature

• Auto Engine RPM

• Tier 4 Final/EU Stage V compliant

• Turbocharged and aftercooled

• Filtered crankcase breather

• Diesel particulate filter

• Selective catalyst reduction

• Dry type air cleaner

• Coolant protection to –34 °C (–29 °F)

• Fuel priming pump, automatic

• Fuel water separator

• Differential lock in front axle

• Axle seal guards

• Enclosed wet disc full hydraulic brakes

• Parking brake, electric

• Lubed for life driveshafts

• Hydrostatic transmission with electronic control

• Operator modes (TC, Hystat,

• Single Pedal and Ice)

• Directional shift aggressiveness (fast, medium, slow)

• Auto Wheel Torque control, adjust wheel torque

• Creeper control, adjust ground speed

• Single plane cooling package, wide 6 fins per inch density

• Hydraulically driven demand cooling fan

• Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission

• Powertrain Guarding

• Fenders (extended cover and full coverage)

HYDRAULICS:

• Automatic lift and bucket kickouts, adjustable in-cab

• Bucket and fork modes, adjustable in-cab

• Cylinder damping at kickout and mechanical end stops

• Fine mode control (fast, medium, slow)

• Hydraulic response setting (fast, medium, slow)

• Hydraulic diagnostic connectors and

• S·O·S ports

• Hydraulic sight gauge, visible

• Load sensing hydraulics and steering

• Seat mounted hydraulic joystick controls

• Payload 250 hours of Demo

ELECTRICAL:

• Alternator, 115-amp, heavy duty

• 12V power supply in cab (2)

• Batteries, 1,000 CCA (2) 24-volt system, disconnect switch

• Back up alarm

• Emergency Shutdown Switch

• LED rear stop and turn lights

• Heavy duty gear reduction starter Product Link

• Elite

• Remote jump-start post

• Resettable main and critical function breakers

• Roading lights front and rear

• Auxiliary flow, third and fourth function

• Connect Under Pressure Disconnects

• Ride Control System, adjustable via display

• Cold start 120 v package

• Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)

• Lights, auxiliary, halogen or LED with engine and DEF compartment lights

• Beacon light, strobe

• Light Guarding

OTHER:

• Large-access enclosure doors with adjustable close/open force

• Parallel lift loader linkage

• MIRROR, INTERNAL 2X REAR VIEW

• FORK TINE, 2.25" X 6" X 60"

• Recovery hitch with pin

• Remote mounted lubrication points

• Lockable compartments

• 1000-hour Service Intervals (after initial 500)

• Cylinder Guarding

• Range of Work Tool Attachments

• Quick Coupler, Constant Pressure Square Tapered Pin (Fusion and ISO)

• Jumper Lines, AUX Third, Fusion

• 3-Piece Aggregate Counterweight, 1200LBS

• Clamshell Front Bucket with Attachment Quick Coupler

• BUCKET-MP, 2.7 YD3, FUS

• Multi-Purpose Bucket, Width 2605mm (103"). Capacity: 2.1 m3 (2.7 yd3) fill factor

• 100% INLCUDES: 4-piece BOCE on clamp base edge and 4-piece BOCE on Dozer base edge, connecting lines with "Turn to connect" QDs FOR USE WITH: FUSION Quick Coupler

• Provide 1 copy each operator, maintenance, and parts manuals

Delivery to:

Idaho Falls District BLM

1405 Hollipark Dr.

Idaho Falls, Idaho 83401

POC: Jason Wright, jswright@blm.gov

Delivery Date – January 15th, 2027- July 31st, 2027 - Monday – Friday 8am-3:30pm Not on Holidays