WindowGuardSpecifications~1.pdf
PDF 16 KB Posted
- Attached to
- IFB# 1579-01 Window Guards
- Solicitation number
- BD-18-1129-PR001-BHA01-24566
- Issued by
- Suffolk County, Massachusetts
About this file
This document contains specifications for window security bars to be used in a state and local government contract opportunity. The window security bars are required to be made of solid steel round bars, 5/16" in diameter, welded to heavy steel channels on both sides. The bars must be spaced 3" apart and have a light gray baked enamel finish. The contract opportunity, IFB# 1579-01 Window Guards, is for the state of Massachusetts. The window guards can be mounted horizontally or vertically and must be a Sterling HA1135, HA1135L, and HA1135EL or an approved equal product.
The document does not provide details on pricing terms, set asides, incumbents, funding requirements, or other salient information about the contract opportunity. It solely focuses on the technical specifications for the window security bars required under the IFB.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 5369.pdf | ||
| BidAwardrev09.doc | DOC document | |
| CorporateCertificate.doc | DOC document | |
| ITBTC2014.doc | DOC document | |
| InviteCommPass~38.pdf | ||
| REAP.doc | DOC document | |
| SpecCondTC.doc | DOC document | |
| W9BHA.doc | DOC document | |
| 5369-a.pdf | ||
| BidForm1579-01.pdf | ||
| BidderChecklistv2.doc | DOC document | |
| GenCond30Bv2.doc | DOC document | |
| SpecCondTCWindowGuards~1.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WINDOW SECURITY BARS-SWING OPENING
1. Materials are to be solid steel round bars, 5/16" diameter, welded to a heavy steel channel on both sides. Each bar will consist of (4) "U" shaped channels and one (1) mounting channel.
A. (4) steel channels are .060" thick, "U" shaped channels are 11/16" OD x 15/16” deep.
Moving side channel fits into mounting channel, has a 11/32" hole at the top and bottom for a safety release clip.
B. Steel mounting channel is .060" thick, "square" shaped, 1 1/16" OD x 1-1/16" deep.
Cut out for bars are 3-13/16" apart with 7/16" ID opening, angled down approx. 45 degrees with a depth of 5/8" into channel. The mounting channel has a 11/32" hole at the top and bottom for a safety release clip.
2. The spacing between bars is 3 ½”.
3. Mounting screws are 3" in length, made of soft steel to become tamper proof once installed.
4. Light gray color, baked enamel finish.
5. Window guards can be mounted horizontal or vertical.
6. To be a Sterling HA1135, HA1135L, and HA1135EL or BHA approved equal.
File details come from the government source that posted it. Updated .