Wheel and Tire Shop LED Installation SOW.docx

STATEMENT OF WORK

WHEEL AND TIRE PROJECT

CP#

LED LIGHT UPGRADE, HANGAR 4, BLDG 1714

CONTRACT #

12 March 2020

STATEMENT OF OBJECTIVES: Provide all necessary work to replace the existing fluorescent lighting within the entire Wheel and Tire shop with brighter LED lights. The current lighting is too dim and not properly distributed throughout the work center, particularly over the inspection area of the shop. To fix this, the contractor will install brighter LED light fixtures and arrange them in a manner to produce even, bright light throughout all areas of the shop.

GENERAL: Provide all supervision, plant labor, transportation, equipment, and materials and perform all necessary engineering and operations to accomplish the following.

· (Office Area) Remove 11 2x2 lay in ceiling lights and replace with 12 new 2x2 LED lay in lights.

· The additional lay in light is to be located above where an exterior window was blocked off.

· (W&T Storage/Inspection Area) Remove 22 4ft fluorescent strip fixtures and replace with 15 new low bay LED fixtures.

· Fixtures to be installed in a manner to evenly distribute and enhance the light throughout the area, increasing the currently available light in the W&T Inspection area.

· (W&T Assembly Area) Remove 18 4ft fluorescent strip fixtures and replace with new 8ft LED strip fixtures. The layout of the current lighting configuration is acceptable and rearrangement of the new lights will not be necessary.

· All lights in all areas must be dimmable and associated wiring and switches must be installed.