West Ottawa Band Uniform Bid Package.pdf

PDF 573 KB Posted

Attached to
Band Uniforms
Solicitation number
RFP WOP 270000000325 1
Issued by
Saginaw County, Michigan

About this file

Bid Package Summary

This is a sealed bid invitation issued by West Ottawa Public Schools in Holland, Michigan, for the manufacture and delivery of band uniforms and related accessories. The school district is requesting bids for 110 marching coats with hangers, 56 marching bibbers, 105 Shakos (hats), 105 plastic shako boxes, 135 plumes, 155 garment bags, 500 long-wristed cotton gloves, 135 raincoats, 20 color guard tunics, 20 long-sleeve guard shirts, and 20 pants/leggings for color guard, plus shipping. All sealed bids must be received by 1:00 PM Eastern Time on Wednesday, December 2, 2026, at the West Ottawa Public Schools Administration Building, 1138 136th Avenue, Holland, Michigan 49424. The anticipated contract award date is January 28, 2027. Bidders must submit two signed copies of the bid form, complete bid samples meeting all specifications, and material swatches with the bid. No pre-bid meeting will be held, and bidders may submit technical questions via email to Kyle Barr, Chief Financial Officer, no later than 48 hours prior to bid opening. The successful bidder will be required to enter into a written agreement within ten days of award notification and must deliver complete pre-production/pilot samples within a specified timeframe for approval before full order delivery.

Bidders must provide pricing on a unit basis with extensions and total bid amounts, with net 30-day payment terms unless otherwise specified. The bid must include a Fabric Certification Affidavit signed by an authorized company official confirming that all materials are first quality with no seconds or flawed materials, a sworn Familial Relationship Disclosure Statement notarized confirming no relationships with school board members or the superintendent, and an Iran Linked Business Affidavit certifying compliance with Michigan Public Act No. 517 of 2012. Bids submitted without these required documents and an accompanying bid sample will be rejected. All fabrics must be cold water shrunk, treated for moth proofing and water repellency, and tested for color fastness. The bid firm must remain valid for 90 days from the bid opening date. No applicable Michigan use and sales tax applies to this project. West Ottawa Public Schools reserves the right to accept or reject any or all bids and is not bound to accept the lowest bid; the school district may award to a bidder other than the low bidder if deemed in the district's best interest.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

WEST OTTAWA PUBLIC SCHOOLS

Band Uniforms

Bid Request

All bids are due by Wednesday, December 2, 2026 @ 1:00 PM

Contact Information:

Kyle Barr

Chief Financial Officer 1138 136th Ave.

Holland, MI 49424 Phone: 616-786-2081

Email: barrk@westottawa.net

Notice to Band Uniform Bidders

West Ottawa Public Schools will accept sealed bids for band uniforms as described in the attached specifications. Bids will be accepted until 1:00 PM, Wednesday, December 2, 2026, at which time they will be publicly opened and read aloud. No oral, telephonic, telegraphic, or facsimile proposals will be accepted.

Bid submissions shall be firm for ninety (90) days from the date of bid opening. Bids must be submitted on the attached bid form and be signed by the bidder. Two (2) signed copies of the bid form should be addressed to the attention of:

West Ottawa Public Schools

Administration Building 1138 136th Ave.

Holland, MI 49424 Re: Band Uniforms

A. The proposal, in duplicate, shall be submitted on the form provided herein with all required items of the form properly filled out.

B. Any questions regarding this project, technical or not, shall be submitted via email, care of Kyle Barr, barrk@westottawa.net no later than 48 hours prior to bid opening. All questions will be answered in writing with a copy to all bidders who have provided an email address.

C. Proposals must be mailed or delivered in person to Kyle Barr, Chief Financial Officer, at the Administration Building located at 1138 136th Avenue, Holland MI 49424. All proposals must be sealed in envelopes, plainly labeled “Band Uniform BID” and must be received prior to 1:00 P.M., local time, on Wednesday, December 2, 2026.

Topic: Band Uniform Bid Opening Time: Dec 2, 2026 01:00 PM Eastern Time (US and Canada)

Evaluation of proposals and award will be at a later date; the successful contractor will receive a letter of intent prior to receipt of contract.

D. No pre-bid meeting will be held

E. The Schedule of Work shall be as follows:

Receive Bids 1:00 P.M. Decemeber 2, 2026 Anticipated award of contract January 28, 2027

F. All bids shall be accompanied by a sworn statement disclosing any familial relationship that exists between the owner(s) or any employee of the bidder and any member of the Board of Education of the School District or the Superintendent of the School District. The Board of Education shall not accept a bid that does not include a sworn and notarized familial relationship disclosure statement.

G. All bids shall be accompanied by Affidavit of Compliance – Iran Economic Sanctions

Act in compliance with “Iran linked business” within the meaning of the Iran Economic Sanctions Act.

H. Michigan Public Act No. 517 of 2012. The Board of Education shall not accept a bid that does not include the Affidavit Of Compliance.

mailto:barrk@westottawa.net

I. Applicable Michigan use and sales tax do not apply to this project.

J. West Ottawa Public Schools’ Board of Education reserves the right to accept or reject all or any portion of a bid, and is not bound to accept the low bid. A bid may be rejected, if not accompanied by a required bid security or by other data required by the Bidding Documents, or which is in any way incomplete or irregular. West Ottawa Public Schools shall have the right to waive informalities or irregularities in a bid received, and to accept a bid which, in the judgment of West Ottawa Public Schools, is in the best interests of West Ottawa Public Schools.

K. Within ten days after being notified of the acceptance of the proposal, the bidder to whom the award is made will be required to enter into a written agreement in the form hereto specified with the West Ottawa Public Schools.

L. The bidder may, during the bidding period, be advised by Addenda of additions or alterations to the Specifications. All such changes shall be included in the work and shall become part of the Contract Documents.

M. The bidder shall visit the site of the work to fully inform himself of the existing conditions.

Questions should be directed to Kyle Barr, Chief Financial Officer, at 616-786-2075, between the hours of 8:00 AM and 4:30 PM, Monday through Friday.

INVITATION PAGE

Sealed bids addressed to

School: West Ottawa Public Schools

Attn: Kyle Barr

Address: 1138 136th Ave.

Address: Holland, MI 49424

Will be accepted until 1:00 PM, Wednesday December 2, 2026

For uniforms in accordance with the attached specifications and conditions and invites your written bid.

“BAND UNIFORMS”

Bidder is to use the attached bid form in submitting bid, providing all information as requested.

Unless otherwise noted, it is presumed that payment is to be made on the basis of net 30 days.

Bidder must furnish, prior to or at the time of the official bid opening established above, a complete “BID SAMPLE”. It is the bidder’s responsibility to see that this uniform arrives prior to the bid opening. Since the bid sample is a requirement of your bid, the Purchaser reserves the right to return unopened any bid not accompanied by the required bid sample.

BID SAMPLE SHOULD BE ADDRESSED TO:

Chief Financial Officer

1138 136th Ave.

Holland, MI 49424

Phone: 616-786-2081 Email: barrk@westottawa.net

GENERAL

The following specifications are provided to offer equal opportunity to all bidders, within the framework of standards of quality and design herewith established. Basic outside materials offered by the bidder shall be so designated or their equal. All equals or substitutes shall be so designated. Failure to do so will disqualify the bid. The Purchaser feels that standard styles, materials, linings and sundry items are equally available to all reputable manufacturers. Any bidder desiring to use any materials or construction practices as a substitute must also submit satisfactory proof in a separate letter attached to your bid that the proposed substitute is of equal or better quality than the construction and/or material(s), etc., specified. Bidder must itemize bids to show the unit price of each item bid, the appropriate extension, and the total amount of the bid. The unit price will govern should there be any errors in extensions. Any attachment sheet or form included with your bid that contradicts the intent, conditions or requirements of the specifications shall be a basis for rejection of your bid.

BID SAMPLE

All bids, in order to be considered, must be accompanied on or before the date and time of the bid opening with a complete finished sample uniform to include all basis garments parts including coats, trousers, overlays, shirts, sashes, etc., plus all components including headgear, plumes, and any other accessories, as applicable, for the band proper group only (unless other groups are specifically requested and noted on the bid form attached).

Samples need not be in the outer shell fabric or color(s) specified nor be in the school’s exact special design details but are to be the quality, style, construction, workmanship and finish as that proposed to be furnished. Where specific construction features are required, these must be illustrated in the sample(s) provided or extra pieces of equipment must be furnished with your bid clearly displaying the manufacturers version of the feature specified.

It should be clearly understood that the bid sample(s) will be used for two purposes including: (1) to determine quality of workmanship and conformance to specifications, and (2) to determine the lowest qualified bidder meeting specifications. Therefore, the Purchaser reserves the right to open seams or linings to gain access to inner construction and also reserves the right to reject any bidder whose bid sample(s) submitted does not meet the specifications.

It should be further understood that, in order to be fair to all bidders, no bidder following the opening of bids will be permitted to submit additional bid samples or pieces of equipment or alter their bid sample(s) in any way. If one bidder is afforded such an advantage, then all other bidders must be given such an opportunity causing delays and confusion not desired by the Purchaser. Thus, all bids must be submitted complete with a sample(s) and a separate letter, if necessary, explaining deviations and/or proposed substitutions, so as to expedite an award. Any determination by the Purchaser as whether a bidder’s bid sample(s) meets or does not meet the required specifications shall be final.

MATERIAL SWATCHES

Liberal size swatches of the material(s) you propose to furnish must be submitted with your bid with swatches properly labeled as to weight and fiber content as required by Federal law. State weight and indicate if fabric samples are mothproofed or treated with a water repellent or any other process. All fabrics specified are to be first quality. Seconds will not be acceptable. All bids must be accompanied with attached “FABRIC CERTIFICATION FORM” signed by an authorized official of the company bidding. Failure to execute and provide this form will be cause for rejection of your bid. In addition, the Purchaser reserves the right to further request a bidder to supply an affidavit signed by an official of the manufacturer of the material herein specified and quoted upon confirming that the bidder will, in fact, furnish the material(s) specified when manufacturing the order.

SILENCE OF SPECIFICATION

The apparent silence of this specification as to any details or the omission from it of a detail or description concerning any point shall be interpreted as meaning that only the best tailoring practices are to prevail and that all workmanship shall be first quality.

PRE-PRODUCTION/PILOT SAMPLE

The pre-production pilot sample and the specifications shall constitute the final basis for acceptance or rejection of bid. If approved, the pre-production/pilot sample will be returned to the successful bidder for duplication. Failure of the delivered uniforms to be of the specified fabric or of the quality of the approved sample shall completely release the Purchaser from any or all contractual obligations to the successful bidder, his agents or assignee. If for any reason the pre-production/pilot sample is not approved, the Purchaser may reject the bid and proceed to the next qualified bidder.

DELIVERY

Delivery of the uniforms shall be within the number of days indicated on the bid form following written acceptance of the pre-production/pilot sample uniform by the Purchaser, except as such delivery may be affected by an Act of God or similar activities beyond the control of the actual manufacturer.

LABELING

All basic uniform garment parts such as coats, trousers, overlays, shirt, skirts, etc., must show contents and percentage of contents of fabric used in that particular part of the uniform. This is required under law by the Federal Labeling Act. There must also be care instructions showing on each above-mentioned part. Each Uniform part is to be numbered, smallest to largest.

MASTER LIST

A register of student’s names including uniform numbers and an accounting of height, weight, chest, waist, and headwear sizes, shall be supplied to the Purchaser along with the completed order for easy distribution of uniforms.

ADDITIONAL INFORMATION

The right is reserved to reject any or all quotation(s) or to accept or reject any items. The right is also reserved to award the bid to other than low bidder if it is found to be in best interest of the Purchaser. The reputation of the bidder will also be considered and therefore bidder may be required to supply a list of several orders manufactured in the past five years.

Upon official awarding of the order, the successful bidder will be required to provide a factory-trained area representative to visit the School to establish sizes and secure all final details pertinent to the manufacturing of the uniforms. Uniforms are to be shipped in hanging Wardrobe Cartons.

Coat Specifications

Pattern Stock sizes run from 28 to 60 for coats (chest size) and 22 to 62 for trousers (waist size). Uniforms are to be provided in a full range of lengths including: short, regular, long, using hand tailored methods that insure proper fit of inner and outer construction details for each size run. All uniforms are to be made to fit the size and body style of the group being fitted. For ease of reissue, measurements are converted to the nearest stock size.

Material All materials are to be Cold Water Shrunk to meet U.S. shrinkage specifications. Material is to be treated for moth proofing and water repellency. All fabrics are to be tested and examined for color fastness in connection with dry cleaning, moisture, perspiration, light, wet pressing, dry and wet crocking.

Lining The coat is to be fully lined with the finest quality High Satin Luster 100% Polyester Lining. This material has a thread count of 126 by 74 with denier 70 by 100, 2.5 oz. per square yard. Lining material is a determinate of the life and comfort of the coat. Lining patterns are cut to align with the outer shell. The bottom of the coat shell and lining is sewn with a single needle stitch to allow for easy alterations in the seam area. Seam allowance in the lining will correspond and align with the outside coat shell seams. The lining is securely fastened along all outer edges, neck and sleeve bottom with a lock stitch.

Optional: Athletic cut Self-Lined construction has matching material as detailed in design specifications covering entire coat front portion.

Inner Chest Canvas (See Diagram) The inner coat foundation on fully constructed coats shall consist of a fine quality main canvas foundation. Each piece of the foundation is cut to the specific coat size required. This foundation will be manufactured from canvas that is comprised with a weft of 42% Viscose Rayon, 35% Hair, and 23% Polyester. It will run the length of the coat front and extend to the armholes and into the shoulder portion of the coat. Attached to the top of the inner coat foundation shall be a layer of non-shrinkable, non-woven felt padding composed of 100% Rayon, 2.5oz per square yard sewn firmly to the main canvas with a series of lock stitched rows. All layers are hand tailored and fitted for each coat size. On white colored outer shell coats, the same quality inner coat foundation in white will be used providing the appropriate aesthetics eliminating the gray canvas that will shadow through the coat. An optional third layer of duplicate canvas will extend laterally over the chest section to the armhole.

Collar Construction (See Diagram) Mylar, a synthetic material that is crush-proof and dry cleanable, shall support standing collars.

The outside of the Mylar is to be laminated with a cushioned pellon to provide a smooth outside appearance of the standing collar. The outside of the collar is to be of the fabric requested in the design specifications. The inside of the collar is Poly Pro-Twill with fused material to provide comfort and durability. Both the hook and the eye are to be riveted through the padding as well as the Mylar collar reinforcement.

Collar Liner (See Diagram) There shall be a removable, washable collar liner made in two layers of 100% gabardine for comfort and absorbency. This liner is to have bias tape piped and sewn all around. The removable collar liner shall be fastened to the collar with a series of male snaps, evenly spaced at intervals of no more than 1 5/16” inches. Spacing the snaps at 1 5/16” intervals provides for better tailoring and fitting of the collar liner so it does not ride up and show on the outside providing for a neater more uniform appearance. These snaps are to be applied to tape, the tape then sewn to the collar and collar liner. Snaps are to be placed so the female portion of the snap shall be permanently sewn to the coat collar, while the matching male snaps shall be sewn to the removable collar liner.

Shoulder Pads (See Diagram) Shoulder pads shall be constructed of the finest quality Desi-cotton. This cotton is multi-layered, to prevent packing or separation. The Pad will be covered with 3 oz. per yard Poly-needle punch.

The pads are sewn into the coat shoulder and armhole seam.

Optional: Shoulder pad with full 100% acetate polyester covering used for Athletic line construction as detailed in design specifications.

Armhole (See Diagram) The armhole will be constructed with the shoulder pad proportioned to fit the back and front of the shoulder. The lining of the coat and the hanging chest piece are then basted to insure proper proportion of the lining to the coat and to insure the shoulder pad fit to the armhole. The armhole is then sewn completely around fastening to the chest piece, shoulder pad and coat body at the same time.

Sweat Shield (See Diagram) Shields are to be piped and machine stitched all around. The sweat shield must be made in fabric treated for water repellency. The purpose of the “sweat shield” is to protect or “shield” the under arm area from perspiration to help prevent discoloration of the external coat and deterioration of inner construction.

Sleeve Construction Sleeves will have a 2.5” turn-up in both sleeve fabric and lining. The lining and sleeve fabric shall be joined and turned up as a combined layer and finished to permit easy sleeve length alteration by the removal and re-sewing of a single seam.

Optional: Athletic Line has adjust-a-cuff snap tape for ease of fit adjustments, sewn into side seam at sleeve end. 3 snap adjustment for Short, regular or long lengths.

Pockets Upper and lower welt of the inside breast pocket is to be of the same material as the shell of the coat in black or white color and is bound around all edges. The inside upper will utilize pocketing material to provide for better durability. All coat pockets are made vertical style placed in the lining unless otherwise requested.

Seams (See Diagram) The coat is to be tailored with four-piece back (center seam plus two additional back body seams), unless otherwise specified. Seams are to be plain with a maximum of 1/2” inches total width, lock stitched and pressed open. The coat is to be completely machine stitched except in areas where tailoring or appearance necessitates other methods. Thread breaks of all stitch types must be secured by stitching back from break ½- 1 inch (back-tacking).

Shoulder Straps Shoulder straps, when specified, will be of the same material as the coat and will be cut for uniformity on the edges. Straps will be reinforced by fusible pellon on each ply—on both the top and the bottom-- to assure uniformity and shape retention.

Zipper Zippers used are to be solid brass metal type, Talon YKK quality, or equal unless otherwise specified. For added durability, center concealed and butted zippers will be sewn on the outside of the inside facing.

Optional: Nylon zippers can be specified.

Thread All sewing operations use “Spectrum” spun polyester size T40, two-cord thread. All threads used are to be heat resistant, vat dyed, sun fast, dry-cleanable and moisture proof.

Braid Yarrington, Grip Flex, or ELC Industries (Rice) quality braid shall be used for trimming. Braid is to be colorfast to cleaning and preshrunk.

BIBBERS

Patterns Patterns are to be marked and graded to insure accuracy and consistency. Patterns are to cover a full range of sizes including short, regular and long, from size 26 to 60. Patterns should provide for seam allowance for simple alterations from year to year by the end user.

Material To be made in fabric as specified in design specifications.

Seams Bibber out seams are to be sewn with a chain lockstitch, serge finished edges, and are to be pressed open. The seat seam and inseam of the bibbers are sewn with a lock stitch and pressed open, with all serge edges. The seat seam is double stitched for added durability.

Shoulder Strap Suspenders (See Diagram) Shoulder Straps are to be 1 ½” wide nylon webbing in white or black. 1 ½” wide nickel cast steel non-rusting double slot sliders are used, two on each strap to allow for length adjustability. The suspenders will attach to a fabric loop in the front of the trousers using another double slot slide.

The straps are permanently attached to the back of the bibbers with a lock stitch in a 1” x 1” square with a cross-stitch X, for added durability.

Zippers (See Diagram) Fully constructed bibbers must use a heavy-duty metal zipper that is attached with separate, lined fly. Bibbers must, have a heavy duty metal snap at the top of the zipper. Zippers are to be graded for lengths based on the size of the bibbers.

Pockets FOB wallet pocket will be manufactured using a hanging system method. Pocket will be topstitched in front chest area for easy access.

BIBBER OPTIONS-See Design Specifications Pages

Reinforced Crotch (See Diagram) Bibbers shall have a set of four double crotch pieces, serge and stitched. Crotch linings must be placed on both sides of the reinforced seams. All stress areas must be bar-tacked. The fly seam will extend 1” past the inseam for extra reinforcement. The seat seams will be sewn on two-needle tandem machine using four dual duty cotton-ploy threads. All turned back areas will be triple serge on both sides of the seam.

Optional Facing and Browne Outlet Fully constructed bibbers have a full top facing, made of the same fabric as the outer garment.

Facing is to be attached to the left and right halves of the garment separately, all around the top and down the center back, turned out and finished pressed. The center back is then joined with a 1 ½” lock stitched seam, forming a Browne Outlet to allow for easy alterations.

Gussets (See Diagram) A gusset, approximately 3” x 7”, made of high quality ribbed knit nylon, folded over to allow for a natural finished edge without stitching, then sewn into the side seam at waist area to allow for a freedom of movement in the arms and body.

Facing Bibbers have a drop facing, made of the same fabric as the outer garment. Facing is to be attached to the front and back halves of the garment separately.

Facing Pockets FOB pockets will be manufactured using a double welt Reese Style method. The welt will be interlined with pellon. The pocketing material is to extend up and be caught by the waistband topstitching. The internal pocket will be turned and top stitched.

Shako (Hat)

General The Shako is to be manufactured with an inner body of Acrylonitrile Butadeine Styrene (A.B.S.)

plastic, HyPac 55 or equivalent, guaranteed not to crack or break. It will be molded, completely waterproof and crushproof to resist wearer abuse. The bands and top are to be sewn to the body.

Visor Visor is non-breakable polyethylene with top portion of a Roller Patten. Visor to be attached to the inner body with poly spun or Dacron thread. Roller Patten, Gold or silver Mylar may be stitched to visor edge as specified in design specifications.

Sweatband Sweatband is to be specially reinforced anti-toxic and anti-migratory vinyl approximately 32 ounces per yard. Sewn six to eight stitches to the inch with #12 cord and turned. Metal grommets are placed to accommodate a string tie used for adjustments to fit. It should be cushioned three-fourths of the way around for greater comfort.

Buttons A 45-ligne-turn back metal prong button is secured through and through. These buttons also secure front chain (if specified) and chin strap.

Optional: a button molded in one piece from A.B.S., with hex nut and post. Post shall be ¼ by 20-thread diameter.

Plume Socket Plume socket shall be one-piece molded part, translucent color to blend in with material used to cover hat. It is to be riveted securely to the shako inner body.

Chinstrap Chinstrap is to be ¾” wide poly vinyl chloride (PVC) equipped with gilt or nickel roller buckle.

WEST OTTAWA HIGH SCHOOL

HOLLAND, MICHIGAN

COAT SPECIFICATIONS

STYLE: MARCHING COAT WITH 2” MYLAR WINGS WITH STRAIGHT FRONT AND

STRAIGHT BACK.

MATERIAL: BURLINGTON WHITE POLYESTER/BURLINGTON BLACK POLYESTER /

SILVER GLITTER METALLIC

CLOSURE: ZIPPER: UNDERARM LEFT SIDE BRASS ZIPPER WITH SNAPS

FRONT DESIGN: A CURVED SPLIT FRONT. TOP HALF OF COAT IS BURLINGTON

WHITE POLYESTER. BOTTOM HALF OF COAT IS BURLINGTON BLACK POLYESTER.

APPLIQUED OVER WHITE AND BLACK 3 CURVED TRIANGULAR SHAPES OF SILVER

GLITTER METALLIC. TOP OF TRIANGLE APPROXIMATELY 1 ½” WIDE, LENGTH OF

TRIANGLE APPROXIMATELY 10” LONG. SPACE BETWEEN TRIANGLES

APPROXIMATELT 1 ½”. ALL TRIANGLES ARE EDGED WITH ¼” BLACK MARROWED

EMBROIDERY. THE UNDER FABRIC IS BURLINGTON WHITE POLYESTER.

BACK DESIGN: BACK OF COAT CURVED SPLIT BACK. TOP HALF OF COAT IS

BURLINGTON WHITE POLYESTER. BOTTOM HALF OF COAT IS BURLINGTON

BLACK POLYESTER. MATCH UP WITH FRONT DESIGN.

SLEEVE DESIGN: BOTH SLEEVES ARE BURLINGTON WHITE POLYESTER WITH

FULL CUFFS OF BURLINGTON BLACK POLYESTER, 4” ON INSIDE SEAM TO 6” ON

OUTSIDE SEAM, TO SIMULATE GAUNTLET LOOK. INSET 1” ON BLACK A TRIM OF

3/8” SILVER METALLIC TUBULAR BRAID.

ON RIGHT SHOULDER ONLY 3” WO SCHOOL LOGO IN BLACK/WHITE EMBROIDERY

WINGS DESIGN: BOTH WINGS ARE BURLINGTON WHITE POLYESTER .

TRIM: INSET ¼” A TRIM OF 3/8” BLACK TUBULAR BRAID.

COLLAR: YES STYLE: HARD STAND UP COLLAR

LINER: YES, BLACK HOOK AND EYE: YES

MATERIAL: BURLINGTON BLACK POLYESTER

TRIM: INSET ¼” A TRIM OF ¼” SILVER METALLIC TUBULAR BRAID

SHOULDER STRAPS: YES

MATERIAL: BURLINGTON BLACK POLYESTER

TRIM: INSET ¼” A TRIM OF ¼” WHITE TUBULAR BRAID

CLOSURE: BLACK SNAPS CLOSURES

INNER CONSTRUCTION:

INNER LINING

SHOULDER PADS

SNAP IN COLLAR LINER

BIBBER SPECIFICATIONS

STYLE: JUMPSUIT BIBBERS

MATERIAL: BURLINGTON BLACK POLYESTER

HEM: ADJUST A CUFF HEM FEATURE

MISC: NYLON WEB SUSPENDERS, BACK STRAPS WITH CRISSCROSS STICH

BRASS ZIPPER WITH FLY AND SNAP CONSTRUCTION.

4” X 6” INSIDE HANGING POCKET

4 WAY REINFORCED CROTCH

REINFORCE THE BOTTOM OF ZIPPER WITH BAR TACKS

HEADWEAR

STYLE: FLAT TOP SHAKO PLUME SOCKET: YES

SIDES, TOP, TOP BAND, BOTTOM BAND: BLACK VINYL

FRONT CHAIN: NEW SILVER 902 SMOOTH MIRROR STRAP

SIDE BUTTONS: SILVER MUSIC LYRE

VISOR: BLACK VISOR WITH SILVER TRIM

CHINSTRAP: BLACK WITH SILVER BUCKLE

ORNAMENT: RIGHT SIDE UP SILVER MIRAGE TRIANGLE FROSTED MIRROR

FULL SWEATBAND HEAD LINER WITH GROMMETS: YES

PLUMES

12” WHITE FRENCH FOUNTAIN

ACCESSORIES

BLACK NYLON GARMENT BAG WITH ONE COLOR PRINT

CASTELLANE PLASTIC SHAKO BOX

LONG WRISTED BLACK COTTON GLOVES

MADE TO ORDER NYLON RAINCOAT UNLINED. BLACK COAT, WHITE HOOD, 2

COLOR PRINT ON HOOD IN BLACK AND ROYAL BLUE PER SCHOOL LOGO.

DRUM MAJOR UNIFORMS

COAT SAME AS BAND WITH BLACK AND WHITE REVERSED

12” BLACK FRENCH FOUNTAIN

THIS DOCUMENT MUST BE COMPLETED AND SIGNED BY AN AUTHORIZED OFFICIAL OF THE

COMPANY SUBMITTING THE BID IN ORDER FOR IT TO BE CONSIDERED.

WEST OTTAWA HIGH SCHOOL BID FORM

We have examined your specifications, fully understood and accepted all their terms and conditions including the bid sample requirement and submit the following prices and information: (In case of errors, unit price will govern)

QUANTITY ITEM UNIT PRICE EXTENSION

110 MARCHING COATS w/ Hangers

56 MARCHING BIBBERS

105 SHAKOS

105 PLASTIC SHAKO BOX

135 PLUMES

155 GARMENT BAGS

500 LONG WRISTED COTTON GLOVES

135 RAINCOATS

20 COLOR GUARD TUNICS

20 LONG SLEEVE GUARD SHIRT

20 PANTS / LEGGINGS FOR GUARD

1 SHIPPING

TOTAL

TERMS:

If required, delivery of a complete “Pre-Production/Pilot Sample” would be assured within ___________ days. Delivery of the complete order will be made within ______ days after receipt of “Pre-Production/Pilot Sample” approval, complete sizes and signed order.

SALES REPRESENTATIVE: FIRM NAME __________________________

Name _______________________ Signed_________________________

Address _____________________ Address________________________

City/ State____________________ City/ State _____________________

Phone _____-_______-_________ Phone______-________-__________

Date ______/________/_________ Date_______/_______/____________

THIS DOCUMENT MUST BE COMPLETED AND SIGNED BY AN AUTHORIZED OFFICIAL OF THE

COMPANY SUBMITTING THE BID IN ORDER FOR IT TO BE CONSIDERED

I, ___________________________________, as an authorized official and employee of the company bidding, hereby certify that all materials and fabrics quoted upon and which would be used in the manufacturing of the proposed uniforms herein described will be the exact materials as called for in the specification. The materials and fabrics, further, will be of first quality. I hereby also confirm that no seconds and no flawed materials or fabrics with imperfections of any kind will be used should our Company be awarded the bid.

DEVIATION CERTIFICATION

The “Bid Sample” included with your bid is to be of the quality, style, construction, workmanship and finish as that proposed to be furnished, as explained on page 1 of the specifications. Deviations from the required specifications must be fully documented and explained in detail below. Otherwise, it is presumed the uniforms quoted upon and proposed by your company would be constructed as your complete “Bid Sample” submitted.

I hereby confirm that the attached specifications will be fully met with the following exceptions, if any:

Authorized Signature________________________

Print Name / Title _________________________

Company Name____________________________

Date ___________________________________

FABRIC CERTIFICATION

AFFIDAVIT OF BIDDER

The undersigned, the owner or authorized officer of _________________________(the “Bidder”), pursuant to the familial disclosure requirement provided in the West Ottawa Public Schools (the “School District”) request for proposal, hereby represent and warrant, except as provided below, that no familial relationships exist between the owner(s) or any employee of _____________________________ and any member of the Board of Education of the School District or the Superintendent of the School District.

List any Familial Relationships:

BIDDER:

(Company Name)

By:_______________________________ (Signature)

Title:_______________________________

STATE OF MICHIGAN )

) SS.

COUNTY OF ___________ )

This instrument was acknowledged before me on the ________ day of _____________, 20 , by

(Notary Public Signature)

_______________ County, Michigan

My commission expires: ______________

Acting in the County of: ______________

IRAN LINKED BUSINESS AFFIDAVIT

All Bids shall be accompanied by a sworn statement disclosing any Iran Linked Business relationship that exists within the owners, including its officers, directors and employees.

The undersigned, owner or authorized officer of _________________________________ (the bidder), pursuant to Michigan Public Act No. 517 of 2012, the “Iran Linked Business” requirement provided in the Ottawa Area ISD Universal Service Fund Request for Proposals hereby represents and warrants that the bidder, including its officers, directors and employees, is not an “Iran Linked Business” within the meaning of the applicable Public Act, and that in the event bidder is awarded a contract as a result of this RFP, the bidder will not become an “Iran Linked Business” at any time during the course of performing under the contract. The bidder further acknowledges that any person who is found to have submitted a false certification is responsible for a civil penalty of not more than $250,000.00 or 2 times the amount of the contract or proposed contract for which the false certification was made, whichever is greater, the cost of the District investigation, and reasonable attorney fees, in addition to the fine. Moreover, any person who submitted a false certification shall be ineligible to bid on future Requests for Proposals (RFPs) for three (3) years from the date that it is determined that the person has submitted the false certification.

There is not an “Iran Linked Business” that exists within the bidder and/or owner, officers, directors and employees.

Bidder: ___________________________________________________ (Company Name)

By: ___________________________________________________ (Signature)

(Title)

This instrument was acknowledged before me, a Notary Public, in and for

______________________ County, on this _____day of ___________________, 20__, ______________________________________________ SS:

(Notary Public Signature)

My Commission expires: _________________________

Acting in the County of: __________________________

A. The proposal, in duplicate, shall be submitted on the form provided herein with all required items of the form properly filled out.
B. Any questions regarding this project, technical or not, shall be submitted via email, care of Kyle Barr, barrk@westottawa.net no later than 48 hours prior to bid opening. All questions will be answered in writing with a copy to all bidders who hav...
C. Proposals must be mailed or delivered in person to Kyle Barr, Chief Financial Officer, at the Administration Building located at 1138 136th Avenue, Holland MI 49424. All proposals must be sealed in envelopes, plainly labeled “Band Uniform BID” and...
Topic: Band Uniform Bid Opening
Time: Dec 2, 2026 01:00 PM Eastern Time (US and Canada)
Evaluation of proposals and award will be at a later date; the successful contractor will receive a letter of intent prior to receipt of contract.
D. No pre-bid meeting will be held
E. The Schedule of Work shall be as follows:
F. All bids shall be accompanied by a sworn statement disclosing any familial relationship that exists between the owner(s) or any employee of the bidder and any member of the Board of Education of the School District or the Superintendent of the Scho...
G. All bids shall be accompanied by Affidavit of Compliance – Iran Economic Sanctions Act in compliance with “Iran linked business” within the meaning of the Iran Economic Sanctions Act.
H. Michigan Public Act No. 517 of 2012. The Board of Education shall not accept a bid that does not include the Affidavit Of Compliance.
I. Applicable Michigan use and sales tax do not apply to this project.
J. West Ottawa Public Schools’ Board of Education reserves the right to accept or reject all or any portion of a bid, and is not bound to accept the low bid. A bid may be rejected, if not accompanied by a required bid security or by other data requir...
K. Within ten days after being notified of the acceptance of the proposal, the bidder to whom the award is made will be required to enter into a written agreement in the form hereto specified with the West Ottawa Public Schools.
L. The bidder may, during the bidding period, be advised by Addenda of additions or alterations to the Specifications. All such changes shall be included in the work and shall become part of the Contract Documents.
M. The bidder shall visit the site of the work to fully inform himself of the existing conditions.
Coat Specifications
Pattern
Material
Lining
Inner Chest Canvas (See Diagram)
The inner coat foundation on fully constructed coats shall consist of a fine quality main canvas foundation. Each piece of the foundation is cut to the specific coat size required. This foundation will be manufactured from canvas that is comprised wi...
Collar Construction (See Diagram)
Collar Liner (See Diagram)
Shoulder Pads (See Diagram)
Armhole (See Diagram)
Sweat Shield (See Diagram)
Shields are to be piped and machine stitched all around. The sweat shield must be made in fabric treated for water repellency. The purpose of the “sweat shield” is to protect or “shield” the under arm area from perspiration to help prevent discolora...
Sleeve Construction
Seams (See Diagram)
Shoulder Straps
Zipper
BIBBERS
Patterns
Seams
Shoulder Strap Suspenders (See Diagram)
Zippers (See Diagram)
Pockets
Reinforced Crotch (See Diagram)
Optional Facing and Browne Outlet
Gussets (See Diagram)
Facing
Facing Pockets
FOB pockets will be manufactured using a double welt Reese Style method. The welt will be interlined with pellon. The pocketing material is to extend up and be caught by the waistband topstitching. The internal pocket will be turned and top stitc...
Shako (Hat)
General
Visor
Sweatband
Buttons
Plume Socket
Chinstrap

File details come from the government source that posted it. Updated .