Water tap detail 8-21.pdf
PDF 121 KB Posted
- Solicitation number
- 246-24-Q-0132
About this file
This document appears to be a government file detailing a water tap installation and a related federal contract opportunity.
The government file provides a material list and specifications for both 3/4-inch and 1-inch water service tap installations, including required components such as tapping saddles, corporation stops, service pipes, curb stops, meters, meter setters, meter boxes, and tracer wire.
The related federal contract opportunity is a solicitation (RFQ 246-24-Q-0132) issued by the Department of Health and Human Services' Indian Health Service. It requires a contractor to furnish and install a water service line in Sand Springs, Oklahoma. The contract is a 100% Indian-owned set-aside under NAICS code 237110, with an estimated price range of less than $25,000 and a 60-calendar day period of performance. Quotes are due by June 18, 2024 and will be evaluated on an acceptable/non-acceptable basis, with the lowest responsive, responsible offeror selected for award. The solicitation provides detailed instructions on required proposal contents, including a firm fixed-price quote, technical specifications, and past performance information.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
¾”-inch tap material list
1. Tapping saddle (Ford 202BS Series with AWWA/CC taper thread)
2. Corporation stop (Ford F1000-3) AWWA/CC taper thread by CTS compression fitting
3. Polyethylene water service pipe ¾” CTS (250 psi)
4. Ball valve curb stop (Ford B41-333) CTS inlet by FIP outlet
5. 5/8”x3/4” meter (supplied and installed by City of Sand Springs)
6. Copper meter setter (Ford VHC92-15W-MM-33B)
Setter requirements include: Angle valve, Cartridge dual check valve, 18” outlet tube extension
7. Private service line (connected by Contractor, pressure reducing valve highly recommended) 8,9. Acceptable in sodded, non-traffic locations:
Meter box, rectangular (Carson 1220-12) Meter box plastic lid (Carson 1220-3) Required in paved or traffic locations:
18”x18” galvanized can, heavy duty frame & lid casting, circular (East Jordan Iron Works)
10. AMR endpoint (provided & installed by City of Sand Springs)
11. AMR remote antenna (provided & installed by City of Sand Springs)
12. Number 12 coated copper tracer wire from mainline tracer wire at corp stop to meter setter
1”-inch tap material list
1. Tapping saddle (Ford 202BS Series with AWWA/CC taper thread)
2. Corporation stop (Ford F1000-4) AWWA/CC taper thread by CTS compression fitting
3. Polyethylene water service pipe 1” CTS (250 psi)
4. Ball valve curb stop (Ford B41-444) CTS inlet by FIP outlet
5. 1” meter (supplied and installed by City of Sand Springs)
6. Copper meter setter (Ford VHC94-18W-88-44B) Setter requirements include: Angle valve, Cartridge dual check valve, 18” outlet tube extension
7. Private service line (connected by Contractor, pressure reducing valve highly recommended) 8,9. Acceptable in sodded, non-traffic locations:
Meter box, rectangular (Carson 1220-12) Meter box plastic lid (Carson 1220-3) Required in paved or traffic locations:
24”x18” galvanized can, heavy duty frame & lid casting, circular (East Jordan Iron Works)
10. AMR endpoint (provided & installed by City of Sand Springs)
11. AMR remote antenna (provided & installed by City of Sand Springs)
12. Number 12 coated copper tracer wire from mainline tracer wire at corp stop to meter setter
File details come from the government source that posted it. Updated .