WASP Offer N4778 University of Maryland Cerebro CFS Concrete CFS HD.pdf

Personalized Proposal for University of Maryland

Created on 11-12-2025

Produced by:

WASP

As solicited by:

University of Maryland

Offer Number

WASP Offer N° 4778 - 11-12-2025

Valid until: 30-08-2026

3D WASP

Proposal

Ro bo tic a rm

WASP EXTRUDER AND COMPATIBLE TOOLS1.

CEREBRO3.

ROBOTIC ARM2.

VACUUM BUILDPLATE4.

CEREBRO is an integration system between robots and extruders, designed to integrate any robotic arm to all of WASP extruders and printing tools, including both LDM and FGF technologies.

This technology will give you the possibility to print any kind of material, from technical and recycled thermoplastic pellets to clay and concrete, and even biomaterials such as mycelium.

DESCRIPTION

WASP Srl

Via Castelletto 104, Massa Lombarda 48024, ITALY

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

CEREBRO

The revolutionary integration system between any robot and WASP extruders

Requirements

INPUT: 220/240V 50/60Hz

POWER CONSUMPTION: from 200W to 2500W

(depending on used tools)

COMPRESSED AIR: 8bar, 100L/min. tank, 8m pipe (only for FGF tools)

CONNECTIVITY: WiFi, LAN, USB

Product Specifications:

• DIMENSIONS: 25x50x58 cm

• NET WEIGHT: 17kg

• CONNECTIVITY: WiFi, Ethernet, Bluetooth, USB

Compatible WASP Tools

• WASP Continuous Feeding System Clay

• WASP Concrete HD CFS

• WASP 3MT HDP Vacuum Buildplates

• NEW OMAP Pellet dryer

Compatible WASP Extruders

FGF

• WASP HDP Extruder

• WASP LHDP Extruder (with Firecap)

• WASP HDP XL Extruder (with Firecap)

• WASP HDP XL METAMORFOSI Extruder (with Firecap)

• WASP HDP XXL

Materials:

PLA, ABS, PETG, TPU, PLA wood, ASA, PLASMIX, 100% recycled PLA e PET, etc.

LDM

• WASP LDM 3.0 Extruder

• WASP LDM XL 3.0 Extruder

• WASP LDM XXL 3.0 Extruder

• WASP LDM Manual Feeding

Materials:

clay, earthenware, porcelain, gres. refractory materials, concrete mortars, earth based mixtures, mycelium, etc.

Description

CEREBRO is an advanced system that transforms any robotic arm into a 3D printer. It was designed to integrate any robotic arm to WASP extruders and printing tools, including both LDM and FGF technologies, giving you the possibility to print any kind of material, from technical and thermodynamic recycled pellets to clay and concrete, and even biomaterials such as mycelium. As you integrate CEREBRO in your robotic system, you're allowing for more than a thousand combination of

WASP technologies, including our FIRECAP and Vacuum buildplate systems.

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

OUR OFFER

INSTRUCTIONS: This is a dynamic offer, please select all the items you would like to purchase.

The final price, based on your selection, will be displayed at the end of the page in the blue area.

All the technical data for the Extruders and tools are available at the end of the document.

Control Unit

Section total €7.252,00

Services

Section total €500,00

CEREBRO

SKU: CRB001

CEREBRO is an integration system between robotic arms and WASP extruders, greatly facilitating and improving the user experience when working with external technologies.

Price €9.800,00

Discount 26 %

Quantity 1

TECHNICAL SUPPORT and CONSULTANCY

Technical support for configuration is included in the purchase of CEREBRO

SKU: CRS000020

Price €800,00

Discount 100 %

Quantity 1 Total €0,00

Remote assistance (valid for 1 year and renewable)

BUY 2 — SAVE 25%

SKU: ASSIS00001

Price €500,00

Quantity 1 Total €500,00

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

Compatible WASP LDM Extruders (Ceramics and Mortars)

LDM WASP Extruder 3.0 for ROBOTIC ARM (Clay Kit)

SKU: CDLAC00030M

Included material:

LDM WASP Extruder 3.0 for ROBOTIC ARM

RED TERRAGLIA material Ceramic mixture packs of 12.5 Kg IRT

TEFLON CONNECTING PIPE - PTFE 10x12x620mm

PRESSURE GAUGE ¼ 0-8 5BAR for Clay KIT

3L Clay Tank complete with 2 lids and piston

ADAPTER MODU / RJ connector

Tank Hanger Clay KIT

RILSAN TUBE 4x6 mm

Nozzles Kit printing reference: Delta WASP 2040 Clay

Price €750,00

Quantity 1 Total €750,00

LDM WASP Extruder XL 3.0 for ROBOTIC ARM (Clay Kit)

SKU: CDLK410143

Included material:

5L Clay Tank complete with 2 lids and piston

KIT of nozzles for WASP LDM Extruder XL 3.0 (nozzles 4 - 6 - 8 mm)

RED TERRAGLIA material Ceramic mixture packs of 25 kg IRT

Reticulated connecting pipe printing reference: 40100 LDM

Price €1.450,00

Quantity 1 Total €1.450,00

LDM WASP Extruder XXL 3.0

SKU: DLK30XXL

with 17 mm nozzle printing reference: Delta WASP 3MT Concrete

Price €6.900,00

Quantity 1 Total €6.900,00 https://www.3dwasp.com/en/clay-3d-printer-delta-wasp-2040-clay/ https://www.3dwasp.com/en/ceramic-3d-printer-wasp-40100-ldm/ https://www.3dwasp.com/en/concrete-3d-printer-delta-wasp-3mt-concrete/

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

Section total €13.690,00

Compatible Tools

MANUAL FEEDING SYSTEM for ROBOTIC ARM

SKU: CDLAC000239

with 6 - 8 mm nozzles

Price €1.600,00

Quantity 1 Total €1.600,00

CONTINUOUS FEEDING SYSTEM 220V / 110V - Including LDM Extruder XL 3.0

SKU: WCFS0021

Including:

WASP LDM XL 3.0 Extruder

Reticulated connection pipe - 1.8 mt - INOX (external) TEFLON (internal)

Water Pressure Adapter for pipe cleaning

Price €6.946,00

Quantity 1 Total €6.946,00

CONCRETE HD CONTINUOUS FEEDING SYSTEM 220V - Including LDM XXL Extruder

SKU: CHDCFS00

includes:

WASP XXL 3.0 LDM Extruder nozzles kit stator and rotor cable

Price €18.500,00

Discount 26 %

Quantity 1 Total €13.690,00

SEQUENTIAL MIXER 80 FOR MORTARS for WASP LDM line (mortars)

Base support + Shaft for cement-based mortars (Shaft for clay-based mortars available upon request) Not suitable for traditional ceramics

Price €5.700,00

Quantity 1 Total €5.700,00

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

Section total €0,00

Software

Section total €0,00

Delivery

Section total €0,00

AI BUILD PROFESSIONAL - Software - 1 year

2 software licenses . more information here

Includes

Unlimited projects and machines Horizontal, angular, multiplanar, nonplanar slicing

Hardware library for robotic and gantry systems for fast-track integration

Materials library for metals, polymers and concrete

Knowledge center

Standard onboarding and support

ISO27001 security Collision detection

Ai Copilot

Geometric analysis and compensation features

Share your projects within your team to distribute knowledge

Enhanced toolpaths capability to isolate and fix the problem areas in builds

Premium onboarding and support

Thermal predictive model to reduce failures due to temperature build up

Radial and advanced non-planar slicing

Price €11.000,00

Quantity 1 Total €11.000,00

Delivery EXW Price €0,00

Quantity 1 https://ai-build.com/software/

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

The USD TOTAL amount is provided for information purposes only. All contractual documents, invoices, and payments shall be issued and made exclusively in Euro (EUR).

$24,417.20

Total €21.442,00

Discounted Amount €8.158,00

IMPORTANT: The flange for fixing WASP extruders to the Customer's Robotic Arm actuator is not supplied by WASP.

Upon purchase, WASP provides the customer with the data, technical drawings and 3D files of the extruders purchased to allow the Customer to produce the flange independently.

If WASP supplies the Robotic Arm, the flange is manufactured and supplied by WASP.

P.IVA : IT02673660391

Offer Confirmation

Offer Total : €21.442,00

Delivery : EXW;

Warranty Terms: HERE ;

Payment: 30% downpayment to confirm the order, 70% before shipping;

Support: HERE our dedicated area;

Shipment : To be aestimated epending on setup chosen at order date. Normally 6 weeks from 30% down payment.

Packing: Depending on setup chosen, defined during the order.

ATTENTION: All Bank Commission to be paid by the remitter, else the payment will not be accepted.

Please use the Quote number ref. as reason of payment

Warranty: WASP's Warranty policy HERE

I confirm the acceptance of the "General conditions of Sale" available HERE

Customer Signature:

Date:

Jianqiang Wei

Payments:

Via Wire Transfer:

Bank Name: BCC CREDITO COOPERATIVO RAVENNATE IMOLESE

Bank Address: Massa Lombarda (RA), Italy https://www.3dwasp.com/en/warranty-and-assistance-policy-wasp/ https://www.3dwasp.com/en/support/ https://www.3dwasp.com/en/warranty-and-assistance-policy-wasp/ https://8927682.fs1.hubspotusercontent-na1.net/hubfs/8927682/22_F_EN_Sales%20Terms_%20WASP.pdf https://8927682.fs1.hubspotusercontent-na1.net/hubfs/8927682/22_F_EN_Sales%20Terms_%20WASP.pdf

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

Branch Number: 23

IBAN: IT 86 Q 08542 67570 000000324084

SWIFT: ICRAITRRF20

ATTENTION: All Bank Commission to be paid by the remitter, else the payment will not be accepted.

Please use the Quote number ref. as reason of payment

Payment methods using bank details different from those indicated are not to be considered. For any possible future change in bank details, WASP srl employs a specific procedure, not simple mail or notifications.

With the acceptance of the offer, the attached terms and conditions of sale are also considered accepted, as read, understood, and accepted as part of the purchase of the machine. Variations from the standard terms of sale will require a separate sales contract with the agreement of both parties.

Invoicing Details

Full Company Name

VAT Number/Tax ID (If you have one)

Admin/Accounting

Telephone Number

Invoicing Address

Admin/ Accounting

Contact

Email

SDI Code (Italian

Companies Only)

Name

Shipping Details

Street Address

City

Postcode

Country

Delivery Contact

Person + Phone

Number

Customer Informations

Street Address

City

Postcode

Country

Phone Number for

Delivery

P.IVA : IT02673660391

Thank you from WASP Team

Feel free to contact us if you need any additional information. Our team will be glad to answer your questions and help you choose the best solution according to your needs.

INFO

info@3dwasp.com

SALES

sales@3dwasp.com

PRESS & MEDIA

press@3dwasp.com

TELEPHONE

+39 0545 87858

Active from Monday to Friday

8:30 AM - 12:30 PM, 2:00 PM - 6:00 PM, UTC+1

WEBSITE

www.3dwasp.com

You can find us on

INSTAGRAM

3dwasp

FACEBOOK

3dwasp

LINKEDIN

WASP

YOUTUBE

3D WASP

TWITTER

3Dwasp https://www.3dwasp.com/en/ https://www.instagram.com/3dwasp https://it-it.facebook.com/3dwasp https://www.linkedin.com/company/wasp-project/ https://www.youtube.com/user/wasprojecteam https://www.youtube.com/user/wasprojecteam https://twitter.com/3Dwasp

P.IVA : IT02673660391

WASP LDM 3.0 Extruder Liquid Deposition Modeling (LDM)

Main Characteristics:

TECHNOLOGY: Liquid Deposition Modeling

NOZZLE DIAMETER: From 1.26 mm to 3 mm

MAX PARTICLE SIZE: Ø 0.3 mm

EXTRUDER DIMENSION: 7x20x10 cm

EXTRUDER WEIGHT: 0.8 Kg

Features

• Material Versatility

• User-Friendly Maintenance

• Seamless Retractions

• High Delivery Rates

• Easy Cleaning

• Interchangeable Nozzles

Supply

INPUT: 24-36Vcc (Motor)

POWER CONSUMPTION: Max 180W

Materials:

• CLAY

• PORCELAIN

• GRES

• EARTHENWARE

Every formulation needs to be tested to grant the compatibility with the extruder

P.IVA : IT02673660391

WASP LDM XL 3.0 Extruder Liquid Deposition Modeling (LDM)

TECHNOLOGY: (LDM) Liquid Deposition Modeling

NOZZLE DIAMETER: 4, 6, 8 mm

MOTOR: Nema 17 + gearbox

MAX PARTICLE SIZE: Ø 0.5 mm

MAX OUTPUT: 5 l/h

EXTRUDER DIMENSION: 30x12x7cm

EXTRUDER WEIGHT: 1.5 Kg

Features:

• Material Versatility

• User-Friendly Maintenance

• Seamless Retractions

• High Delivery Rates

• Easy Cleaning

• Interchangeable Nozzles

Supply:

INPUT: 24-36Vcc (Motor)

POWER CONSUMPTION: Max 180W

• GRES

• EARTHENWARE

• REFRACTORY MATERIALS

Every formulation needs to be tested to grant the compatibility with the extruder

P.IVA : IT02673660391

WASP Offer N° 4778 - 11-12-2025

Valid Until: 30-08-2026

WASP EXTRUDER

LDM XXL 3.0

Main Characteristics:

• TECHNOLOGY: LDM (Liquid Deposition Modeling)

• NOZZLE DIAMETER: 17mm (other diameters on request)

• MOTOR: 180W closed-loop brushless, with integrated driver

• PARTICLE SIZE: up tp 3 mm

• MAX OUTPUT: 3l / min

• EXTRUDER DIMENSION: 82x14x18cm

• EXTRUDER WEIGHT: 10 Kg

Features:

• Material Versatility

• High Delivery Rates

• Easy Cleaning

• Interchangeable Nozzles

• Stainless Steel Construction

• Closed-Loop Brushless Motor

• 28:1 Gearbox

• Seamless Retractions

• INPUT: 24-36Vcc (Motor)

• POWER CONSUMPTION: Max 180W

Official Materials:

• Concrete mortars with max particle size 1 mm

• fiber reinforced concrete (polymeric fibres, Lmax 30 mm; Wmax 15 kg/mc)

• foamed concrete

• clay

• porcelain

• gres

• earth based mixtures with natural fibers

P.IVA : IT02673660391

WASP CONTINUOUS FEEDING

The ideal tool for professional production of 3D printed ceramic objects.

Main Features:

1. Connection wiring for Delta WASP 40100 Clay

2. Continuous Feeding System

3. WASP LDM XL 3.0 extruder with special connecting flange

4. PTFE/INOX connecting tube

5. Rotating stand for CFS

Physical Dimensions

• DIMENSIONS:

CFS 36 x 32 x 158 cm

• WEIGHT: 60 kg

• PACKAGING DIMENSIONS:

80 x 120 x 73 cm

• WEIGHT WITH PACKAGING: 120 kg

Interface:

Built-in dual PWM controller synchronous cable control

• TECHNOLOGY: CFD (Continuous Feeding System)

• CAPACITY: 11L

• MAX OUTPUT: 30 kg/h

• COMPATIBLE NOZZLES DIAMETERS: 4 – 6 – 8 mm

Compatibility:

• WASP 40100 LDM

• Delta WASP 40100 Clay

• LDM WASP Extruder XL 3.0

• INPUT: 220/240V 50/60Hz (110V son demand)

• ABSORBED POWER: Max 450W

Mechanics:

Frame and cover stainless steel, steel

Base steel

• EARTHENWARE

• GRES

• REFRACTORY MATERIALS

P.IVA : IT02673660391

WASP CONCRETE HD

CONTINUOUS FEEDING SYSTEM

The ideal tool for professional production of 3D printed concrete objects

• TECHNLOGY: LDM

• CAPACITY: 10L

• MAX FLOW: 3 L/min

• NOZZLE DIAMETER: from 8 to 25mm (upon request)

• MAX PRESSURE: 30 bar

• GRAIN SIZE: up to 3mm

Physical Dimensions:

• DIMENSIONS: CFS 60 x 50 x 150 cm

• WEIGHT: 67kg (Extruder weight: 10 kg)

• PACKAGING DIMENSIONS: 80 x 120 x 73 cm

• WEIGHT WITH PACKAGING: 120 kg

• INPUT: 220/240V 50/60Hz (110V on demand)

• ABSORBED POWER: Max 800W

Compatibility

Delta WASP 3MT LDM, CEREBRO

Interface:

Built-in PWM controller synchronous cable control

Mechanics:

• FRAME AND COVER: stainless steel, steel

• BASE: steel

Materials

• Dry mortars

• 3d ready to print mixtures

• concrete

• fiber-filled mixtures

WASP partners with AI Build, an advanced platform designed to optimize and automate large-scale additive manufacturing.

Fully compatible and integrated with WASP technologies , AI Build enhances precision and efficiency,offering advanced slicing for robotic arms. The features include non-planar and angular slicing, hardware libraries, Ai Copilot. The platform simplifies multi-axis toolpath creation to ensure scalable, efficient production with minimal waste.

What is included:

• Unlimited projects and machines setup

• Horizontal, angular, mulitiplanar, nonplanar slicing

• Hardware library for robotic and gantry systems

• Materials library for metals, polymers and concrete

• Smart defaults and AI recommendations

• Ai Copilot

• ISO 27001 certified, secure cloud hosting

• Automatic updates

• Access to Knoledge Centre

• Self served onboarding

• Share your projects within your team to collaborate

• Advanced non-planar slicing modes

• Selection and editing of toolpath regions for varied process parameters

• Geometrical analysis and optimization (corners, overhangs, offsets)

• Thermal predictive model to reduce failures due to temperature build up

• Standard onboarding, training and support

• Access to the full capability of the world’s most advanced AM workflows

• 120+ CAD operations for design automation (Design for LFAM)

• Early access to betafeatures such as CNC milling, collision avoidance

• Access to roadmap and feature prioritization

• Premium onboarding, training and support

X

Features