Attachment_2 Performance Work Statement.docx

PERFORMANCE WORK STATEMENT

TITLE: APG-CBC/ADM – Supply of Gases and Service of Ancillary Equipment for Welding/Cutting Machines, 3 April 2024

1.0 Scope.

1.1 Background. The Advanced Design & Manufacturing (ADM), Prototype Integration Facility (PIF) is tasked with providing the Chemical Biological Center (CBC) and its customers with technical and manufacturing support for unique CB Defense items. ADM provides this support by maintaining a high readiness state with personnel and with a significant complement of design and manufacturing equipment.

1.2 Objective. The contractor shall provide services onsite at Aberdeen Proving Ground (APG) Edgewood Area unless otherwise authorized. The contractor shall provide all labor (including travel time), documentation, repair parts, maintenance supplies, any and all fluids, tools, test equipment, transportation and other related services at the prices shown in the schedule unless otherwise specified and shall keep the Government-owned equipment in good operating condition per OEM’s standards.

2.0 Applicable Documents.

3.0 Requirements. The contractor, as an independent contractor and not as an agent of the government, shall provide the necessary resources (except for those identified as government furnished property or assistance) to perform the following work.

3.1 Work shall be performed within the Principal Period of Maintenance (PPM), 7:00AM to 3:30PM, Mondays through Thursdays, excluding weekends and Federal holidays.

3.2 The contractor shall provide repair service for all equipment specified in the Performance Work Statement.

3.3 Contractor shall provide unlimited on-site visits for customer support when requested by the Contracting Officer's Representative (COR) or Technical Lead at ADM. Contractor shall perform remedial maintenance (repairs) after notification that equipment is inoperative. Emergency service call response shall be on site within 24 hours of contractor notification and repairs must be made on site within 3 days of contractor inspection.

3.4 Machines

1. Dynasty 700, s/n 2J3501776

2. Dynasty 350, s/n MD310388L

3. 350P, s/n LF071331

4. Dynasty 200, s/n MA240045L

5. Spectrum 2050, s/n KK002209

6. Dynasty 700 s/n LJ3501766

7. 350P, s/n MA110025B

8. Shielding and Cutting Gases. Cylinder Service. (Supply the cylinders, TriMix, that are needed for use of the laser cutting machine)

9. Safety equipment and accessories (Supply, when needed, any and all safety equipment that is needed for the gas cylinders and dewers)

10. Manifolds and gas handling equipment. (Support any current and future manifolds system that ADM has, along with the handling equipment need to handle the gas cylinders and dewers)

11. Safety Equipment and accessories. (Supply, when requested, any safety equipment and accessories that is needed for the welding department (i.e. gloves, grinding wheels, safety glasses, weld jackets, etc.)

12. Nitrogen Manifold (current system on our LVD laser cutting machine)

13. Argon Manifold

14. Oxygen Manifold (current system on our LVD laser cutting machine)

15. Cryogenic Supply pallets / manifolds and regulation systems. (current system on our LVD laser cutting machine, pallets are used to hold the Nitrogen and Oxygen dewers. Easy hookup to the manifold system)

3.5 Supply of Welding & Industrial Gases

3.5.1 The contractor shall provide delivery of a variety of pure gas and mixtures onsite at Advanced Design and Manufacturing, 8500 Otto Road Bldg. E4301, Gunpowder MD 21010. The contractor shall provide delivery services of Supply of Welding & Industrial Gases on a weekly basis minimum.

3.5.2 Variety of pure gas and mixtures including;

· Oxygen

· Argon

· Hydrogen

· Argon Mixtures

· Helium Mixtures

· Carbon Dioxide

· Nitrogen

· Propane

· Liquid Nitrogen

· Liquid Oxygen

· Compressed Medical Oxygen

· Instrument Air

· Nitrous Oxide

· Acetylene

4.0 Government Furnished Property. N/A

5.0 Deliverables: The contractor shall deliver all data/supplies/services to: Steinert, Charles Robert CIV USARMY DEVCOM CBC (USA) <charles.r.steinert.civ@army.mil> via email. The format requirements are, Word, Excel, and PowerPoint, along with the mailing address for hardware, supplies or other items that are being shipped.

6.0 Travel. N/A

7.0 Delivery Schedule: Maintenance

a. Standard and emergency service to be performed on an as need basis

b. Annual inspection of all hose, cables and electrical connections. All upgrade or replacement parts shall be provided under contract.

c. Supply of Welding and Industrial Gase on a weekly basis.

8.0 Government Point of Contact.

US Army Combat Capabilities Development Command Chemical Biological Center

ATTN:

COR – Jay Watson jay.e.watson.civ@army.mil Aberdeen Proving Ground, MD 21010-5424 Telephone Number: (410) 417-0784

On-site Technical POC – Charlie Steinert charles.r.steinert.civ@army.mil Building E4301 Aberdeen Proving Ground, MD 21010-5424 Telephone Number: (410) 436-8783

9.0 Safety and Health. Contractor shall submit an ESOH Plan IAW CDRL DI-SAFT-82313. Only information addressing sections 3.1, 3.2a, 3.2b(1)(a)(4) and 3.2b(1)(f)(4) are required.

ADM will help eliminates hazards where possible, and the contractor/vendor doing the PM will manage Environment, Safety, and Occupational Health (ESOH) risks where hazards cannot be eliminated. All work will comply with OSHA and ANSI standards, and other applicable federal and local regulatory requirements.

10.0 Security. As required from AT/OPSEC form.

11.0 Period of Performance.

Base Year and Two (2) One (1) Year Options Base Year 15 May 2024 – 14 May 2025 Option Year 1 15 May 2025 – 14 May 2026 Option Year 2 15 May 2026 – 14 May 2027