A02_-_SOW_FLIR.pdf

Statement of Work

1. EQUIPMENT (SPECIFICATIONS):

The vendor shall provide the following along with the purchase of one FLIR FC-690-ID-N Thermal Camera that meets the following mission requirements:

1.1 Thermal Camera

• Camera lens must have 90° field of view (FOV), 7.5mm focal length, and f1.2.

• Camera must have image resolution at least equal to 640 x 480 pixels.

• Spectral range of 7.5 µm to 13.5 µm.

• Thermal frame rate equal to 30 Hz.

• Camera must have 4x continuous E-Zoom.

• 10/100 Mbps Ethernet port

• Automatic flat field correction

• Thermal and temporal triggers

• Support for 32GB SD card

• Includes at least 3-year warranty for camera and 10-year warranty for sensor.

1.2 Wall mount

• Designed for use with FC-690-ID-N camera and purchased concurrently

• Cable wall mount

• 8” in length, white in color

1.3 Camera power supply

• Designed for use with FC-690-ID-N camera and purchased concurrently

• Power over Ethernet (POE) supply

• IEEE 802.3AT

2. PERFORMANCE OBJECTIVES:

a. The contractor shall provide all manuals, operating instructions and supporting software, etc.

with the camera and tripod system.

b. The contractor shall deliver the camera and tripod to the following address:

US Army Aberdeen Test Center 6850 Lanyard Road – B358 Attn: Jake Christopher Aberdeen Proving Ground, MD 21005-5059

The Government delivery Point of Contract (POC) will be Jake Christopher Phone:

410-278-5109 E-mail: john.j.christopher15.civ@mail.mil

3. EVALUATION OF PROPOSALS: Vendors shall be evaluated based on the proposals that are the Lowest Price Technically Acceptable (LPTA) to the Government. The technical specifications are listed in this document, section 1.