A01_-_SPECS_(10979857).pdf

W91ZLK-17-T-0048

AIR COMPRESSORS For CARA

SPECIFICIATION SHEET

Standard Specs Four stage, air cooled, pressure lubrication high pressure compressor Maximum working pressure: 5000 psi Application working pressure: To be advised Charging Rate: 26.4 SCFM Tolerance on capacity +/- 5%.

Diesel engine w/ electric start & clutch Automatic condensate drain system Gauge panel Compressor high temperature and low oil pressure shutdown and light On/off switch Final air pressure switch Spark arrestor muffler Powder coated aluminum frame and cabinet enclosure Motor horsepower: 27 Electrical Requirements: 12 Volts DC Other voltages available upon request Electrical classification: NEMA 4 electrical enclosure Air sample-independent lab Relief valves- Nupro w/ adapters & certs

GAG-0010W/CAL

Safari rack Include test documents, chamber certifications, paper & electronic copies of manual Air purification: P10S (230,000 cu ft before cartridge change out is required) Clear hinged cover for touch screen protection Configuration: OFFSHORE

Required Non-Standard Modifications to be include in final cost:

Lifting lugs 316 stainless steel tubing Air inlet modification - 2" hose w/ cuff and fab bracket Crosby swivel hoist lifting rings (1016935) Hose reel mounted on top portion of cabinet (HR-175245) w/ 100' high pressure hose Fork lift rails (175245) Inlet hose (MTS-0694) NO lifting eyes on lower skid Intake coupling in roof with hose connecting between the coupling and the Compressor intake filter-10' length of hose supplied loose 15' fill hose with BFFD-347 assembly Two high pressure outlet ports (4500 PSI) Modified fuel tank with refill port near cabinet opening rather than further inboard