A.09.03_W91YTZ18Q0186_Combined_Synopsis-comments-updated09082018.pdf

W91YTZ-18-Q-0186 Combined Synopsis/Solicitation

The Womack Army Medical Center (WAMC) Contracting Cell, Regional Health Contracting Office – Atlantic, Fort Bragg, NC 28310, Nutrition Care Division has a requirement for multiple pieces of Commercial Kitchen Equipment, this is a turn-key requirement which must include service and product training, removal and installation.

Quote should include cost of equipment, freight, unloading, uncrating, erecting, setting in place, and 12 month warranty on parts and labor.

This notice is a request for quotes; send to Ms. Cynthia A. Richardson @ cyntha.a.richardson.civ@mail.mil. No telephonic requests will be returned. All responses will be received no later than 12 September 2018, 0800 am EST.

The resulting award will be made on SF 1449, for commercial supplies. All responses must be received by 13 September 2018, 8:00 AM EST. The solicitation number for this requirement is W91YTZ-18-Q-0186. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) is 2005-100 (22 August 2018). The size standard is 1000 and the NAICS code of 333318 Other Commercial and Service Industry Machinery Manufacturing.

SITE VISIT: Due to the post security requirements, please arrive early enough to make it through the gates. If you plan on coming for a site visit, please email cyntha.a.richardson.civ@mail.mil.

This requirement is for a one time purchase. Clauses and provisions throughout this solicitation can be viewed by accessing website https://acquisiton.gov/far. FAR provision 52.212-1 [Instructions to Offerors Commercial Items] applies to this acquisition.

All offerors are cautioned that if selected for award, they must be registered with the System for Award Management (SAM). SAM can be accessed via the internet at www.sam.gov/. Confirmation of SAM registration will be validated prior to awarding a contract.

Schedule B.

CLIN Description 0001 OVEN GAS, ROLL-IN, 1 ea Baxter Manufacturing Model No. OVSOOG2-EE Rotating Rack Oven, gas, curved front, holds (2) single or (1) double oven racks, programmable digital controls, auto rack lift, Advanced Controls with 4-stage bake & 99 programmable menus, self- contained steam system stainless steel construction, fully fire sealed hood, flush floor, single vent, 275,000 BTU, cUL, ENERGY STAR 1 ea one year parts and labor warranty with additional 9 years for heat exchanger tubes, standard 1 ea HTSNAT Natural gas burner 1ea 208-240v/60/3ph, requires 120v/60/lph control circuit (USA) 1 ea LFTOOB "B" style lift, standard 1 ea PRNONO Without prison package, standard 1 ea ASYFLD Oven body shipped split, mailto:cyntha.a.richardson.civ@mail.mil mailto:cyntha.a.richardson.civ@mail.mil https://acquisiton.gov/far

1 ea Basic Assembly, Set-in Place & Start-up - per specification listed below (NET) 1 ea Includes:

1) Standard 2-Trip assembly by authorized (non-union) service representative

2) 1st Trip to include uncrating and setting equipment in place. Customer is to have equipment within 20ft of final location.

3) 2nd Trip to include start-up, calibration, adjustment and demonstration of equipment upon notification that all utilities are in place.

If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B. Table _________________

0002 OVEN RACK, ROLL- IN, 1 ea

Baxter Manufacturing Model No. BDRSB-10 Roll-In Double Oven Rack, (10) slides hold (20) 18" x 26" pans, 6" OC spacing, double side load, stainless steel construction, Baxter style lift, for use in double rack oven 1ea Assembled & welded, add suffix "A" to model no. ships class 250 under 90 lb. or class 150 over 90 lb, standard 0003 OVEN RACK, ROLL- IN, 1 ea

Baxter Manufacturing Model No. BDRSB-15 Roll-In Double Oven Rack, (15) slides hold (30) 18" x 26" pans, 4" OC spacing, double side load, heavy duty stainless steel construction, Baxter style lift, for use in double rack oven Assembled & welded, add suffix "A" to model no. ships class 250 under 90 lb or class 150 over 90 lb, standard

0004 BLAST CHILLER FREEZER, REACH IN, 1 ea

Delfield Model No. T14D ConvoChiJI™ T Series Blast Chiller/Shock Freezer, single section, reach-in, 154 lbs blast chill or 120 lbs shock freeze capacity, auto hot gas defrost, electronic control with 99 program, HACCP memory, stainless steel exterior & interior, self-contained, legs, UL, UL EPH, 3 hp 1ea 3 Year parts & labor, S Year compressor warranty standard 1 ea 220-230v/60/3, 20 amp service, standard 1ea ASOOO-AXD-0062 Casters (shipped loose for field assembly)

If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0005 PASS-THRU HEATED CABINET, 1 ea CoolscapesT"' Hot Food Cabinet, Pass-thru, single-section, 23.0 cubic feet, digital exterior temperature display, (3) chrome wire shelves, glass hinged half height doors, door locks, stainless steel exterior front, sides & interior, 5" locking casters, 208-240v/60/1-ph, 6.0 amps, NEMA 6-20P, NSF, UL, CUL

1ea 3 Year parts & labor warranty standard 1ea Door hinged on right standard (Thermometer side) 1ea Door hinged on right standard (Rear) 1 ea Set of (4) 5” locking casters, standard If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0006 HOOD#5, PROPOSED NEW EQUIPMENT

0007 COMBI OVEN, GAS

Convotherm Model No. C4 ET, 6.20GB Convotherm Cambi Oven/Steamer, gas, with steam generator, (6) 18" x 26" full size sheet pan or (12) 12" x 20" x 111 hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi -steam & retherm, multi• point core temperature probe r five-speed auto reversing fan, ant i - microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1·ph, 7.5 amps, 129,600 BTU, cULus, NSF, ENERGY STAR•

1 ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 1ea Customer must register the equipment on•line at www.Convotherm.com to get the free “service Start-up” 1 ea Natural Gas 1 ea CACK ConvoCJean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (1) 1 liter ConvoCare and set of connectors and hoses, standard 1 ea DD-TIDisappearing Door, for EasyTouch 6.20 1ea a water analysis is required for the proper selection of a water treatment system.

1 ea. QTll-CR Optipure Water Treatment System, dual-cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet • scale-inhibiting technology, (1) CTOS-QlO Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter NOTE: This model is not ENERGY STAR• Certified with Convo Smoker option 3ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20

Add this total cost to Schedule B Table. ITEM TOTAL:

0008 STACKING KIT

Convotherm Model No. 3456174 Stacking Kit on 6” Legs, for 6.20 on 6.20 (6.20 on 10.20) (gas models) (Note: 12 inch leg is recommended. Only use the 6 inch leg in cases where the hood height is too low to accommodate at 12 inch leg.)

Add this total cost to Schedule B Table.

http://www.convotherm.com/

0009 COMBI Oven, GAS Convotherm Model No. C4 ET 10.20GBt Convotherm Combi Oven/Steamer, gas, with steam generator, (10) 18" x 26" full size sheet pan or (20) 12" x 20" x 1" hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi-steam & retherm, multi- point core temperature probe, five-speed auto reversing fan, anti-pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 211,400 BTU, cULus, NSF 1ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 1ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 1ea Natural Gas 1ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (1) 1 liter ConvoCare and set of connectors and hoses, standard 1ea DD-TI Disappearing Door, for EasyTouch 10.20 1ea water analysis is required for the proper selection of a water treatment system.

If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0010 HOOD# 8, PROPOSED NEW EQUIPMENT

0011 2 EA COMBI OVEN, GAS

Convotherm Model No. C4 ET 6.20GB Convotherm Combi Oven/Steamer, gas, with steam generator, (6) 18" x 26" full size sheet pan or (12} 12" x 20" x 1" hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi -steam & retherm, multi- point core temperature probe, five-speed auto reversing fan, anti - microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 129,600 BTU, cULus, NSF, ENERGY

STAR•

2 ea 12 month parts and labor warranty, standard 2ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 2ea Natural Gas 2ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (1) 1 liter ConvoCare and set of connectors and hoses, standard 2ea DD-TIDisappearing Door, for EasyTouch 6.20 2ea a water analysis is required for the proper selection of a water treatment system.

2ea QTll-CR Optipure Water Treatment System, dual-cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet• scale-inhibiting technology, (1) CTOS-QlO Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter 2ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20 If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0012 STACKING KIT 2 EA

Convotherm Model No. 3462278 Staking kit, 6 inch high casters, for 6.20 on 6.20 (gas models)

Add this cost to Schedule B Table.

0013 COMBI OVEN, GAS 2 ea Convotherm Model No. C4 ER 10.20GB Convotherm Combi Oven/Steamer, Gas, with steam generator, (10) 18" x 26" full size sheet pan or (20) 12" x 20" x 1" hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi-steam & retherm, multi- Point core temperature probe, Five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 211,400 BTU, cULus, NSF 2 ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 2ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 2 ea Natural Gas 2 ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (1) 1 liter ConvoCare and set of connectors and hoses, standard 2 ea DD-n Disappearing Door, for EasyTouch 10.20 2ea A water analysis is required for the proper selection of a water treatment system.

2ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20 If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0014 Hood #9, Proposed New Equipment Add this total cost to Schedule B Table.

0015 COMBI Oven, Gas 2 EA

Convotherm Model No. C4 ET 6.20GB Convotherm Cambi Oven/Steamer, Gas, with steam generator, (6) 18" x 26" full size sheet pan or (12) 12" x 20" x 1" hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi-steam & retherm, multi- point core temperature probe, five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 129,600 BTU, cUlus, NSF, ENERGY

STAR•

2ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 2ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up 2ea Natural Gas 2ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (l} 1 liter ConvoCare and set of connectors and hoses, standard 2ea DD-IT Disappearing Door, for EasyTouch 6.20 2ea A water analysis is required for the proper selection of a water treatment system.

2ea QTll -CROptipure Water Treatment System, dual-cart ridg e, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet • scale-inhibiting technology, (1) CT0S-Q10 Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter 2ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20 If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL:

0016 STACKING KIT, 2 EA

Convotherm Model No. 3462278 Stacking Kit, 6" High on Casters, for 6.20 on 6.20 (6.20 on 10.20) (gas models) Add this total cost to Schedule B Table.

0017 COMBI OVEN, GAS 2 each Convotherm Model NO. C4 ER 6.20GB Convotherm Combi Oven/Steamer, gas, with steam generator, (6) 18” X 26” full size sheet pan or (12) 12 “ X 20” X1” hotel pan capacity, 9”easyTouch control panel, 20 stages each & 399 cooking receipe storage, (4) cooking modes, hot air, steam, combi -steam & retherm, multi- point core temperature probe, Five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 211,400 BTU, cULus, NSF 2ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 2 ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 2ea Natural Gas 2ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with :{ l) 10liter ConvoClean, (l) 1 liter ConvoCare and set of connectors and hoses, standard 2ea DD-TT Disappearing Door, for EasyTouch 10.20 2ea a water analysis is required for the proper selection of a water treatment system.

2ea CWR20 Wire Shelf, 21° x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20

Add this total cost to Schedule B Table. ITEM TOTAL

0018 HOODS 10 and 11, Propose new equipment Add this total cost to Schedule B Table.

0019 COMBI OVEN, GAS 1 ea

Convotherm Model No. C4 ET 6.20 GB Convotherm Combi Oven/Steamer, gas, with steam generator, (6) 18” X 26" full-size sheet pan or (12) 12" x 20" x 1" hotel pan capacity, 9" easy Touch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi-steam & retherm, multi- point core temperature probe, five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 129,600 BTU, cULus, NSF, ENERGY STAR 1ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 1ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 1ea Natural Gas 1ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: {l) 10 liter ConvoClean, {l) 1 liter ConvoCare and set of connectors and hoses, standard 1ea DD-TT Disappearing Door, for EasyTouch 6.20 1ea A water analysis is required for the proper selection of a water treatment system.

1ea QTll-CR Optipure Water Treatment System, dual-cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet scale-inhibiting technology, (1) CTOS-QlO Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter 3ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20

If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

0020 STACKING KIT 1 ea Convotherm Model No. 3462278 Stacking Kit, 6" High on Casters, for 6.20 on 6.20 (6.20 on 10.20) (gas models) Add this total cost to Schedule B Table.

0021 COMBI OVEN, GAS 1 ea

Convotherm Model No. C4 ET 6.20 GB Convotherm Combi Oven/Steamer, gas, with steam generator, (6) 18” X 26" full-size sheet pan or (12) 12" x 20" x 1" hotel pan capacity, 9" easy Touch control panel, 20 stages each & 399 cooking recipes storage, (4) Cooking modes: hot air, steam, combi-steam & retherm, multi- point core temperature probe, five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 211,400 BTU, cULus, NSF, ENERGY STAR 1ea 12 month parts and labor warranty and second 12 month parts only warranty, standard 1ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start-up" 1ea Natural Gas 1ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: {l) 10 liter ConvoClean, {l) 1 liter ConvoCare and set of connectors and hoses, standard 1ea DD-TT Disappearing Door, for EasyTouch 6.20 1ea A water analysis is required for the proper selection of a water treatment system.

1ea QTll-CR Optipure Water Treatment System, dual-cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet scale-inhibiting technology, (1) CTOS-QlO Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter 3ea CWR20 Wire Shelf, 21" x 26", stainless steel, for 6.20, 10.20, 12.20 &20.20 If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

GRILL

0022 COMBI OVEN, GAS 2 EA

Convotherm Model No. C4 ET 6.10GB Convotherm Cambi Oven/Steamer, Gas, with steam generator, (6) half size sheet pan or

(6) 12" x 20" x 1" hotel pan capacity, 9" easyTouch control panel, 20 stages each & 399 cooking recipes storage, (4) cooking modes: hot air, steam, combi-steam & retherm, multi- point core temperature probe, Five-speed auto reversing fan, anti- microbial hygienic door handle, pull-out spray hose, ConvoClean+ Fully automatic hands-free cleaning system, stainless steel construction, 0.6 kW, 120v/60/1-ph, 7.5 amps, 75,000 BTU, cULus, NSF 2ea 12 month parts and labor warranty and second 12 month parts only warranty, standard

2 ea Customer must register the equipment on-line at www.Convotherm.com to get the free "service start•up" 2 ea Natural Gas 2 ea CACK ConvoClean "Hands Free" automatic cleaning system, comes with: (1) 10 liter ConvoClean, (1) 1 liter ConvoCare and set of connectors and hoses, standard 2 ea. DD-TT Disappearing Door, for EasyTouch 6.10 2 ea a water analysis is required for the proper selection of a water treatment system.

1 ea QTll-CR Optipure Water Treatment System, dual-cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes lsoNet• scale-inhibiting technology, (1) CTOS-QlO Catalytic Carbon Filter, & (1) CTOS-QCR activated carbon filter 8 EACH 3055637 Basket, 12" x 20", wire, for frying products (1.5" deep) If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

0023 STACKING KIT 1 ea Convotherm Model No. 34622n Stacking Kit, 611 High on Casters, for 6.10 on 6.10 (6.10 on 10.10) (gas models) Add this total cost to Schedule B Table.

0024 OVEN RACK SHELF 3 ea Convotherm Model No. CWRlO Wire Shelf, 13" x 21", stainless Steel, for 6.10,

10.10 & minis Add this total cost to Schedule B Table.

0025 HD RANGE, 34” 6OPEN BURNERS 1 ea Garland/US Range Model No. M43R Master Series Heavy Duty Range, gas, 34", {6) 24,000 BTU two-piece Starfire burners, removable heads, standard oven, piezo ignition, drip tray, porcelainized oven interior, stainless steel front & sides, 6" Chrome steel adjustable legs, 184,000 BTU, CSA Flame, CSA Star, NSF (Garland) 1ea Two year limited parts and labor warranty, covers products purchased and installed in the USA only, standard 1 ea Note: All Master Series Ranges, storage, modular, fryers, attachment & under-fired char broilers require a high shelf or back guard attachment 1 ea Natural gas, specify elevation if over 2,000 ft 1 ea 3/4" Rear gas connection, including "Tee" in manifold, end cap & cover (Consult spec sheet and specify) 1 ea Swivel Casters, with Polyurethane wheels (non-marking) 1 ea NOTE: Oven base ranges require either High shelf or back guard 1 ea M34SD Master Series Single high Shelf, 22-1/2" H, 34" W, stainless steel (Garland) If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

0026 PRESSURE REGULATOR 1 ea Garland/US Range Model No. 2670200 Natural Gas Regulator, 3/4" N.P.T. (Consult spec sheet and specify) Add this total cost to Schedule B Table.

0027 STACKING KIT, 1 Ea Convotherm Model No. 3456174 Stacking Kit on 6" Legs, for 6.20 on

6.20 (6.20 on 10.20} (gas models} (NOTE: 12 inch leg is recommended. Only use the 6 inch leg in cases where the hood height is too low to accommodate a 12 inch leg) Add this total cost to Schedule B Table.

0028 HD RANGE, 34”, 2 HOT TOPS

Garland/US Range Model No. M46R Master Series Heavy Duty Range, gas, 34"(2) 17" even heat hot tops, Standard oven, piezo ignition, stainless steel front & sides, 6'' legs, 130,000 BTU (Garland)

1 ea Two year limited parts and labor warranty, covers products purchased and installed in the USA only, standard 1 ea Note: All Master Series Ranges, storage, modular, fryers, attachment & under-fired char broilers require a high shelf or back guard attachment 1 ea Natural gas, specify elevation if over 2,000 ft 1 ea 3/4" Rear gas connection, including "Tee" in manifold, end cap & cover (Consult spec sheet and specify) 1 ea 2670200 Natural Gas Regulator, 3/4" N.P.T. {Consult spec sheet and specify) 1 ea Extra Oven Rack, for full size ovens 1 ea Swivel Casters, with Polyurethane wheels (non-marking) 1 ea NOTE: Oven base ranges require either High shelf or backguard 1 ea M34SD Master Series Single High Shelf, 22-1/2" H, 34" W, stainless steel (Garland) If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

0029 TILTING SKILLET BRAISING PAN, GAS 2 EA

Cleveland Range Model No. SGM30TR DuraPan™ Tilting Skillet, gas, 30- gallon capacity, modular enclosed cabinet base, standard with hydraulic hand tilt with quick lowering feature, stainless steel, includes spring-assisted cover, gallon markings and electronic spark ignition, food strainer, stainless steel level adjustable feet, 91,000 BTU

2 ea 1-year parts & labor warranty, standard 2 ea Performance start-up included at customer request after equipment is installed (Free Water Quality Check included) {contact Cleveland Sales Representative for details) 2 ea Natural Gas 2 ea 120v/60/1-ph,1.8 amp, standard 2 ea HTS Standard Manual Hand Tilt, with quick lowering feature (hydraulic) 2 ea TD2SK 2" tangent draw-off valve, front mounted left side, includes FSSK strainer (Note: May require additional lead time, contact factory) 2 ea PRSS H/C Pre-Rinse Spray Head with hose (P/N B-0113) 2 ea FBSTR Faucet Bracket for R series floor model skillets

If any of the items are separately priced, please put a total beside the item.

Add this total cost to Schedule B Table. ITEM TOTAL

0030 GAS CONNECTION HOSE KIT 16 EA

T&S Brass Model No. HG-4D-48K Safe-T-Link Gas Connector Kit, 3/4" Connection, 48"L, stainless steel braid with extruded coating, (1) quick disconnect, (1) street “EL", ball valve, restraining cable adjustable for 3'to 5'

0031 GAS CONNECTION HOSE KIT 16 EA

T&S Brass Model No. HG-4C-48K Safe-T-li nk Gas Connector Kit, 1/2" Connection, 48"L, stainless steel braid with extruded coating, (1) quick disconnect, (1) street "EL", ball valve, restraining cable adjustable for 3'to 5'

Add this total cost to Schedule B Table.

0032 SERVICE TRAINING

CONVOTHERM AGREES TO PROVIDE AN ON SITE TRAINING SESSION FOR THE IN-HOUSE

SERVICE PERSONAL FOR THE COMBI OVENS

Add this total cost to Schedule B Table.

0033 PRODUCT TRAINING

CONVOTHERM AGREES TO CONDUCT IN HOUSE TRAINING PROVIDED BY THEIR

CORPORATE CHEF AND ASSISTED BY PERSONAL FROM KITCHEN RESOURCE GROUP.

Add this total cost to Schedule B Table.

0034. Freight. If freight is prepaid by the Vendor, please estimated cost of freight.

Add this total cost to Schedule B Table.

0035. Installation. This is a turn key operation. Provide costs for:

Removal and Installation (includes unloading, uncrating, Erecting, setting in place)

Add this total cost to Schedule B Table.

0036. Warranties:

One year Two year

SCHEDULE B TABLE

CLIN Quantity Description Price Extended Price 0001 1 each Oven Gas, Roll in 0002 1 each Oven Rack, Roll-in 0003 1 each Oven Rack, Roll in 0004 1 each Blast Chiller, Reach in 0005 1 each Pass thru Heated

Warming Cabinet

0006 1 each Hood #4 0007 1 each Combi Oven Gas 0008 1 each Stacking Kit 0009 1 each COMBI,Oven, Gas 0010 1 each Hood #8 0011 2 each COMBI Oven Gas 0012 2 each Stacking Kits 0013 2 each COMBI Oven Gas 0014 1 each Hood #9 0015 2 each COMBI Oven Gas 0016 2 each Stacking Kits 0017 2 each COMBI oven, Gas 0018 2 each Hoods #10 and 11 0019 1 each COMBI oven, Gas 0020 1 each Stacking Kig 0021 1 each COMBI Overn, Gas 0022 2 each COMBI Oven, Gas 0023 1 each Stacking Kit 0024 3 each Oven Rack Shelf 0025 1 each HD Range, 34” 6 Open

Burners

0026 1 each Pressure Regulator 0027 1 each Stacking Kit 0028 2 each HD Range 34”, 2 Hot

Tops

0029 2 each Tilting Skillet Braising Pan, Gas

0030 16 each Gas Connection Hose Kits

0031 16 each Gas Connection Hose Kits

0032 1 Job Service Training 0033 1 Job Product Training 0034 1 Job Prepaid Freight Estimate 0035 1 Job Installation 0036 Warranty 1 year

Warranty 2 year Total Cost

Provide your Company’s Dunn and Bradstreet number (DUNS); CAGE code; tax ID number; and your Published Price list, by item number, for evaluation purposes.

The following provisions in their latest editions apply to this solicitation. FAR Clauses and provisions can be viewed at https://www.acquisition.gov

Vendors shall include a completed copy of FAR provision 52.212-3 ALT 1, Offeror Representations and Certifications with their offer. Offerors shall include a confirmation of receipt of any amendments to this solicitation. Failure to submit a confirmation could result in the offer being determined non- responsive.

Clause 52-212-4 Contract Terms and Conditions—Commercial items, applies to this acquisition to include any applicable addenda.

52.212-4 Contract Terms and Conditions – Commercial Items (JAN 2017).

Addendum to 52.212-4.

(w) The non-FAR Part 12 discretionary FAR, DFAR, AFARS, and LOCAL clauses included herein are incorporated into this contract either by reference or in full text. If incorporated by reference, see clause 52.252-2 for locations where full text can be found.

(End of Addendum to 52.212-4).

52.203-3 Gratuities (APR 1984) 52.203-6 ALTERNATE 1. Restrictions on Sub Contractor Sales to the Government (Sep 2006) 52.203-12 Limitation on Payments to influence certain federal transactions (OCT 2010) 52.203-17 Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights (APR 2014) 52.204-4 Printed or Copied on Double-Sided on Postconsumer Fiber Content Paper (May 2011) 52.204-9 Personal Identity Verification of Contractor Personnel (JAN 2011) 52.204-10 Reporting Executive Compensation and First Tier Subcontract Awards

(OCT 2016)

52.204-18 Commercial and Government Entity Code Maintenance (JUL 2016) 52.204-21 Basic Safeguarding of Covered Contractor Information Systems (JUN 2016) 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred Suspended, or Proposed for Debarment (OCT 2015) 52.219-4 Notice of price evaluation preference for HUNZONE small business concerns OCT 2014) 52.219-8 Utilization of Small Business Concerns (NOV 2016) http://www.acquisition.gov/

52.222-3 Convict Labor (Jun 2003) 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JAN 2014).

52.222-21 Prohibition of Segregated Facilities (APR 2015 (EEO).

52.222-26 Equal Opportunity (APR 2015) 52.222-35 Equal Opportunity for Veterans (OCT 2015) 52.222-36 Equal Opportunity for Workers with Disabilities (JUL 2014) 52.222-37 Employment Reports on Veterans (OCT 2015) 52.222-50 Combating Trafficking In Persons (MAR 2015) 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contractors for Maintenance, Calibration, or repair of Certain Equipment (MAY 2014) 52.223-3 Hazardous Material Identification and Material Safety Data (JAN 1997) 52.223-5 Pollution Prevention and Right-to-Know information (MAY 2011) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) 52.228-5 Insurance – Work on a Government Installation (JAN 1997) 52.232-33 Payment By Electronic Funds Transfer (JUL 2013) 52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984) 52.242-13 Bankruptcy (JUL 1995) 252.201-7000 Contracting Officer Representative (DEC 1991) 252.203-7000 Requirements Relating to Compensation of Former DOD Officials (Sep 2011) 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (SEP 2013) 252.204-7000 Disclosure of Information (OCT 2016) 252.204-7003 Control of Government Personnel work Product (Apr 1992) 252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism (OCT 2015) 252.225-7012 Preference for Certain Domestic Commodities (FEB 2013) 252.225-7021 Trade Agreements (SEP 2016) 252.225-7048 Export Controlled items (JUN 2013)

252.232.7003 Electronic Submission of Payment Requests and Receiving Reports (Jun 2012).

252.232-7010 Levies on Contract payments (DEC 2006)

CLAUSES INCORPORATED IN FULL TEXT.

52.209-10 PROHIBITION ON CONTRACTING WITH IN VERTED DOMESTIC

CORPORATIONS (NOV 2015)

(a) Definitions. As used in this clause--

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Subsidiary means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

(b) If the contractor reorganizes as an inverted domestic corporation or becomes a subsidiary of an inverted domestic corporation at any time during the period of performance of this contract, the Government may be prohibited from paying for Contractor activities performed after the date when it becomes an inverted domestic corporation or subsidiary. The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(c) Exceptions to this prohibition are located at 9.108-2.

(End of clause)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION

(JULY 2013)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall represent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it (X) is, ( ) is not a small business concern under NAICS Code 339118- assigned to contract number W91YTZ18PXXXX.

(Contractor to sign and date and insert authorized signer's name and title).

(End of clause)

52.252-2 Clauses Incorporated by reference (Feb 1998).

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es):

www.acquisition.gov/far

(End of clause).

52.252-6 Authorized Deviations in Clauses (Apr 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter

2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause).

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER

INCIDENT REPORTING (DEVIATION 2016-O0001)(OCT 2015)

(a) Definitions. As used in this clause—

“Adequate security” means protective measures that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information.

“Compromise” means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

“Contractor attributional/proprietary information” means information that identifies the contractor(s), whether directly or indirectly, by the grouping of information that can be traced back to the contractor(s) (e.g., program description, facility locations), personally identifiable information, as well as trade secrets, commercial or financial information, or http://www.acquisition.gov/far other commercially sensitive information that is not customarily shared outside of the company.

“Contractor information system” means an information system belonging to, or operated by or for, the Contractor.

“Controlled technical information” means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

“Covered contractor information system” means an information system that is owned, or operated by or for, a contractor and that processes, stores, or transmits covered defense information.

“Covered defense information” means unclassified information that—

(i) Is—

(A) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

(B) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(ii) Falls in any of the following categories:

(A) Controlled technical information.

(B) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations Security process).

(C) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives.

To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(D) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Government wide policies (e.g., privacy, proprietary business information).

“Cyber incident” means actions taken through the use of computer networks that result in an actual or potentially adverse effect on an information system and/or the information residing therein.

“Forensic analysis” means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

“Malicious software” means computer software or firmware intended to perform an unauthorized process that will have adverse impact on the confidentiality, integrity, or availability of an information system. This definition includes a virus, worm, Trojan horse, or other code-based entity that infects a host, as well as spyware and some forms of adware.

“Media” means physical devices or writing surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which information is recorded, stored, or printed within an information system.

‘‘Operationally critical support’’ means supplies or services designated by the Government as critical for airlift, sealift, intermodal transportation services, or logistical support that is essential to the mobilization, deployment, or sustainment of the Armed Forces in a contingency operation.

“Rapid(ly) report(ing)” means within 72 hours of discovery of any cyber incident.

“Technical information” means technical data or computer software, as those terms are defined in the clause at DFARS 252.227-7013, Rights in Technical Data-Non Commercial Items, regardless of whether or not the clause is incorporated in this solicitation or contract. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software executable code and source code.

(b) Adequate security. The Contractor shall provide adequate security for all covered defense information on all covered contractor information systems that support the performance of work under this contract. To provide adequate security, the Contractor shall—

(1) Implement information systems security protections on all covered contractor information systems including, at a minimum—

(i) For covered contractor information systems that are part of an Information Technology (IT) service or system operated on behalf of the Government—

(A) Cloud computing services shall be subject to the security requirements specified in the clause 252.239-7010, Cloud Computing Services, of this contract; and

(B) Any other such IT service or system (i.e., other than cloud computing) shall be subject to the security requirements specified elsewhere in this contract; or

(ii) For covered contractor information systems that are not part of an IT service or system operated on behalf of the Government and therefore are not subject to the security requirement specified at paragraph (b)(1)(i) of this clause—

(A) The security requirements in National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171, “Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations,”

(see http://dx.doi.org/10.6028/NIST.SP.800-171) that is in effect at the time the solicitation is issued or as authorized by the Contracting Officer with the exception of the derived security requirement 3.5.3 “Use of multifactor authentication for local and network access to privileged accounts and for network access to non-privileged accounts”, which will be required not later than 9 months after award of the contract, if the Contractor notified the contracting officer in accordance with paragraph (c) of the provision 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls (DEVIATION 2016-O0001)(OCT 2015); or

(B) Alternative but equally effective security measures used to compensate for the inability to satisfy a particular requirement and achieve equivalent protection approved in writing by an authorized representative of the DoD Chief Information Officer (CIO) prior to contract award; and

(2) Apply other information systems security measures when the Contractor reasonably determines that information systems security measures, in addition to those identified in paragraph (b)(1) of this clause, may be required to provide adequate security in a dynamic environment based on an assessed risk or vulnerability.

(c) Cyber incident reporting requirement.

(1) When the Contractor discovers a cyber incident that affects a covered contractor information system or the covered defense information residing therein, or that affects the contractor’s ability to perform the requirements of the contract that are designated as operationally critical support, the Contractor shall—

(i) Conduct a review for evidence of compromise of covered defense information, including, but not limited to, identifying compromised computers, servers, specific data, and user accounts. This review shall also include analyzing covered contractor information system(s) that were part of the cyber incident, as well as other information systems on the Contractor’s network(s), that may have been accessed as a result of the incident in order to identify compromised covered defense information, or that affect the Contractor’s ability to provide operationally critical support; and

(ii) Rapidly report cyber incidents to DoD at http://dibnet.dod.mil.

(2) Cyber incident report. The cyber incident report shall be treated as information created by or for DoD and shall include, at a minimum, the required elements at http://dibnet.dod.mil.

(3) Medium assurance certificate requirement. In order to report cyber incidents in accordance with this clause, the Contractor or subcontractor shall have or acquire a DoD-approved medium assurance certificate to report cyber incidents. For information on obtaining a DoD-approved medium assurance certificate, see http://iase.disa.mil/pki/eca/Pages/index.aspx.

(d) Malicious software. The Contractor or subcontractors that discover and isolate malicious software in connection with a reported cyber incident shall submit the malicious software in accordance with instructions provided by the Contracting Officer.

(e) Media preservation and protection. When a Contractor discovers a cyber incident has occurred, the Contractor shall preserve and protect images of all known affected information systems identified in paragraph (c)(1)(i) of this clause and all relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow DoD to request the media or decline interest.

(f) Access to additional information or equipment necessary for forensic analysis. Upon request by DoD, the Contractor shall provide DoD with access to additional information or equipment that is necessary to conduct a forensic analysis.

(g) Cyber incident damage assessment activities. If DoD elects to conduct a damage assessment, the Contracting Officer will request that the Contractor provide all of the damage assessment information gathered in accordance with paragraph (e) of this clause.

(h) DoD safeguarding and use of contractor attributional/proprietary information. The Government shall protect against the unauthorized use or release of information obtained from the contractor (or derived from information obtained from the contractor) under this clause that includes contractor attributional/proprietary information, including such information submitted in accordance with paragraph (c). To the maximum extent practicable, the Contractor shall identify and mark attributional/proprietary information.

In making an authorized release of such information, the Government will implement appropriate procedures to minimize the contractor attributional/proprietary information that is included in such authorized release, seeking to include only that information that is necessary for the authorized purpose(s) for which the information is being released.

(i) Use and release of contractor attributional/proprietary information not created by or for DoD. Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is not created by or for DoD is authorized to be released outside of DoD—

(1) To entities with missions that may be affected by such information;

(2) To entities that may be called upon to assist in the diagnosis, detection, or mitigation of cyber incidents;

(3) To Government entities that conduct counterintelligence or law enforcement investigations;

(4) For national security purposes, including cyber situational awareness and defense purposes (including with Defense Industrial Base (DIB) participants in the program at 32 CFR part 236); or

(5) To a support services contractor (“recipient”) that is directly supporting Government activities under a contract that includes the clause at 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

(j) Use and release of contractor attributional/proprietary information created by or for DoD. Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is created by or for DoD (including the information submitted pursuant to paragraph (c) of this clause) is authorized to be used and released outside of DoD for purposes and activities authorized by paragraph

(i) of this clause, and for any other lawful Government purpose or activity, subject to all applicable statutory, regulatory, and policy based restrictions on the Government’s use and…