Q&A__1.pdf

RFQ W91WFU19Q0012 Q&A #1

1. At the walkthrough, it was identified that rooms 004, 004A, 005, 007, and 008 require full motion detection coverage. Please confirm that these rooms should be added to the scope.

(Ref: Site Visit and PWS 5.4)

ANSWER: The Government confirms that these rooms should be added to the scope. These have been added to the PWS.

2. Some rooms were observed as having finished ceiling at height that was at or exceeded the limit of the AP 669. Can a 360 motion detector rated for the heights of those ceilings be used?

(Ref: Site Visit and PWS 5.4)

ANSWER: Yes, a 360 motion detector rated for the heights of those ceilings can be used. The Contractor should identify in their proposal each location they propose an alternative motion detectors with appropriate technical specifications. The PWS has been updated to remove the specific part callout for AP 669.

3. At the walk through it was identified that rooms 005 and 007 will require their own ACUs in each room. Can the government confirm that ACUs need to be added to rooms 005 and 007?

(Ref: Site Visit and PWS 5.4)

ANSWER: The Government confirms and revisions have been made to the PWS.

4. Can the government please confirm that a 230VAC 16A circuit will be available from the breaker panel in room 008A? (Ref: PWS 5.4.3)

ANSWER: Offerors should assume that a 230VAC 16A circuit is available from the breaker panel in Room 008A for proposal and should verify upon site survey.

5. Can the government confirm the make and model of the GFE camera along with the accessories (pendant mount, etc.) that will be provided? (Ref: PWS 5.4.10)

ANSWER:

Manufacturer: PELCO Part Number: S6230-EGL1US

Wall Mounts: IWM-GY

Power Supplies: WCS1-4

6. At the site survey, an updated drawings package to include furniture was mentioned. Can the government please provide these updated drawings? (Ref: Site Visit)

RFQ W91WFU19Q0012 Q&A #1

ANSWER: The updated drawings package has been updated on the PWS. The Furniture Parts List will be uploaded with the RFQ amendment as an attachment to Q&A#1.

7. Please confirm that substituting project references for “copper audio visual transmitters and receivers, copper HID transmitters and receivers and all associated cabling,” with references of scope utilizing “fiber audio visual transmitters and receivers, fiber HID transmitters and receivers and all associated cabling” are also acceptable. (Ref: Technical Experience Projects Template

(Attachment 1), page 4, question 8)

ANSWER: Yes, this is acceptable.