Attachment_1_-_Technical_Experience_Projects_Template.docx

W91WFU18Q0021 – Attachment 1

TECHNICAL EXPERIENCE PROJECT TEMPLATE

GENERAL INSTRUCTIONS:

1. Reference Addendum to 52.212-1 and Evaluation & Award Procedures for additional information.

2. A project may be based on any of the following:

a. A contract performed within the last 5 years.

b. A task order performed within the last 5 years.

3. There is no requirement or benefit to completing multiple project templates if your experience can be fully described in fewer.

4. Documented experience as a Prime Contractor or Subcontractor is acceptable. Experience must reflect that of the offeror; if experience was derived from a previous teaming or subcontracting arrangement, then only the portion provided by the Offeror as described in the proposal may be submitted.

5. Offerors shall respond to all applicable questions in this template.

6. All substantiating documentation supporting the information within this template shall be submitted in PDF format.

7. All requested substantiating information shall be highlighted within the PDF documents.

8. All file documentation shall be included in Volume 3 of the Offeror’s proposal submission.

9. All explanations within this document are limited to no more than 125 words.

10. The scope of this requirement is further described in the PWS. Offerors shall submit technical experience projects similar to the one described within the PWS and in accordance with ICD 705 and ICS 705 guidance/specifications.

PROJECT Number (1-3): # of 3.

TECHNICAL EXPERIENCE - BACKGROUND INFORMATION:

1. Who is/are the PRIME CONTRACTOR(s) and what is the CONTRACT OR TASK ORDER NUMBER(s) of the project (add rows as necessary)?

Note: In order to substantiate the Prime Contractor Name, the Offeror shall provide a scan of the award page of the Contract or Task Order in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

2. Indicate here if performance is as a SUBCONTRACTOR.

If Subcontract, Briefly explain scope and duties relative to the scope of this requirement.

Click here to enter text.

Note: In order to substantiate the SubContract, the Offeror shall provide a scan of the award page and substantiating section(s) of the award document in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

3. What is the VEHICLE TYPE? (Check only one): To qualify efforts must meet size/scope with performance within the last five (5) years.

|_| CONTRACT

|_| TASK ORDER

Fully describe here.

Click here to enter text.

4. Provide a PRIMARY Reference: (Federal Government person who can verify all the Contract or Task Order data - Government Contracting Officer, Project/Program Manager, or Contracting Officer Representative) (add rows as necessary)

5. Provide an ALTERNATE Reference: (Federal Government person who can verify all the Contract or Task Order data - Government Contracting Officer, Project/Program Manager, or Contracting Officer Representative) (add rows as necessary)

6. Does the project meet the minimum requirement of being similar to the project described within the PWS and in accordance with ICD 705 and ICS 705 guidance/specifications?

|_| Yes |_| No

Note: The Offeror shall provide excerpt(s) from verifiable documentation to substantiate these scope descriptions in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

IF ANSWER TO QUESTIONS 6 IS “YES” THEN PROCEED BELOW. A “NO” ANSWER FOR THIS QUESTION INDICATES AN UNACCEPTABLE PROJECT.

TECHNICAL EXPERIENCE – RATING RELATED INFORMATION

7. Was this project for the design AND manufacturing of a swing space? (Check only one)

A. |_| YES

B. |_| NO

Note: Offeror shall provide excerpts of Contract, Task Order, or subcontract documentation that substantiate the scope of this project in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

8. Did this project include installation of power, lighting, cooling, heating, ventilation, furniture, Electronic Security System (ESS), physical security, Inside Plant (ISP), AND all communications equipment in a swing space? (Check only one)

A. |_| YES, all of these components B. |_| NO, only some of these components C. |_| NO, none of these components

Briefly explain which components (if any) were installed during this project in the space below:

Click here to enter text.

Note: Offeror shall provide excerpts of Contract or Task Order documentation that substantiate the swing space components in Volume 3 of the proposal submission.

9. Did this project involve the transportation, deployment, and build-out of a swing space? (Check only one)

A. |_| YES

B. |_| NO, only some of these tasks were performed C. |_| NO, none of these tasks were performed

Briefly explain which tasks (if any) were performed during this project in the space below:

Click here to enter text.

Note: Offeror shall provide excerpts of Contract or Task Order documentation that substantiates the tasks performed in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

10. If this project involved transportation, deployment, and/or build-out of a swing space, where was the final delivery location? (Check only one AND notate performance location below)

A. |_| OCONUS Location B. |_| CONUS Location C. |_| N/A

Briefly explain each where the work was performed in the space below:

Click here to enter text.

Note: Offeror shall provide excerpts of Contract or Task Order documentation that substantiates the place of performance in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

11. Did this project require cleared Contractor personnel (TS or SECRET)? (Mark all that apply)

A. |_| TOP SECRET

B. |_| SECRET

C. |_| N/A

Briefly explain the clearance requirements (if any) for the project in the space below:

Click here to enter text.

Note: Offeror shall provide excerpts of Contract or Task Order documentation that substantiates the clearance requirement in Volume 3 of the proposal submission. Highlight this information in the PDF document(s).

END OF PROJECT

SOURCE SELECTION INFORMATION – SEE FAR 2.101 AND 3.104