W91RUS22R0155 0001 Conformed.pdf

SEE ADDENDUM

(No Collect Calls)

W91RUS22R0155 12-Aug-2022

b. TELEPHONE NUMBER

520-538-2926

8. OFFER DUE DATE/LOCAL TIME

09:00 AM 30 Aug 2022

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W91RUS9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

ALICIA KEAN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011829077

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

ACC-APG

2133 CUSHING ST.

BLDG 61801

FORT HUACHUCA AZ 85613

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W61DEG 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

0009 SC CO NETCOM 9TH SC(A

GREELY HALL

BLDG 61801, ROOM 3206

ATTN: CSM JASON MCCOY

FORT HUACHUCA AZ 85613

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339950

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF60

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W91RUS22R0155

Section SF 1449 - CONTINUATION SHEET

ADDENDUM

INSTRUCTIONS TO OFFEROR-COMMERCIAL ITEMS. PLEASE REVIEW

THOROUGHLY AND ENSURE ALL INSTRUCTIONS ARE FOLLOWED.

1. Fill in ALL Pricing and All Applicable TAXES on ALL Line Items (CLINs). Please TOTAL ALL CLINs, IN YOUR QUOTE to show an overall FINAL Price and include ALL shipping charges as FOB Destination. Please ensure your cost on any applicable attachment matches your entry.

2. When submitting your quote in response to this Request for Quote, the offeror shall provide their best pricing, including all discounts.

3. Include the delivery lead-time.

4. Provide the following information on your quote:

a. POC Name

b. POC Phone Number

c. POC E-Mail

5. The Government will award a Firm Fixed-Price contract resulting from this solicitation on a lowest-priced technically acceptable basis (considering the following two factors: technical, and price.) All offerors shall be considered in terms of price, lowest to highest, and then the apparent lowest-priced offeror will be evaluated for acceptability under the technical and price factors. If the lowest-price offeror is evaluated as unacceptable, the acceptability of the next lowest-price offeror will be evaluated, continuing this process as necessary. The offer shall meet all terms and conditions of the solicitation and shall detail the offered solution in their quote or attach a data specification sheet.

6. Quote/Proposal shall be received electronically via EMAIL to alicia.a.kean.civ@army.mil no later than 09:00AM Local AZ time on 30 August, 2022.

7. Questions about the solicitation are to be directed through EMAIL at alicia.a.kean.civ@army.mil. All Questions shall be submitted electronically via EMAIL before the 09:00AM Local AZ time on 29 August, 2022.

Additional Information

1. Vendor invoicing shall not be submitted prior to proof of delivery that items have been received.

2. Per DFARS 252.232-7003 Electronic Submission of Payment Requests, the vendor shall submit combination payment requests (invoice and receiving report) using Wide Area Work Flow (WAWF). Receipt and Acceptance (WAWF-RA) or other methods authorized by the Contracting Officer. Failure to comply could result in delayed payment.

3. Please provide a detailed breakdown or narrative of what is being provided to meet the requirement. Do not copy and paste the line item information from the RFQ to your bid as this could classify a bid unsuccessful in the technical evaluation process. We require detailed descriptive information on all bids.

4. ONLY THE CONTRACTING OFFICER (KO) CAN MAKE CHANGES TO THE

CONTRACT/DELIVERY ORDER/PURCHASE ORDER.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Greely Hall Signage Bldg 61801, 19 signs

FFP

Greely Hall Signage Bldg 61801, 19 signs, see Salient Characteristics for details.

FOB: Destination

PURCHASE REQUEST NUMBER: 0011829077

PSC CD: 9905

NET AMT

SALIENT CHARACTERISTICS

BOSS Board Description:

• 42” (H) x 60” (W) black plexiglass (1/4” thick)

• 8 - 1” in depth Gold Standoffs, 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 44” (H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2” in depth, centered from top of the board to the top of the Army logo

• BOSS (all Capital lettering, Times New Roman Bold)

• Affixed to wood

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth

• Army logo is affixed to walnut board 1” above bottom of walnut board and centered left to right

• Satin finish on wood, rounded edges

• Three rows of stackable shelving to hold various items (similar to vertical mounted storage holder).

• Shelving will be black plexiglass, affixed to black plexiglass board

• Shelving in total will be 12” (W) and 30” (H)

• Top shelving will be 3” from top edge of plexiglass

• Shelving will be 3” from right edge of plexiglass

• 1 Lockable dropbox

• 12” (W) x 4” (H) x 6” (D)

• Will be 2” from bottom shelf

• Will be 3” from right edge of plexiglass

• Must have a hasp

• Will be black in color (metal is acceptable)

• Must be mounted to black plexiglass, 2” from bottom of plexiglass

• Opening in top of the box to insert paper

• Cork board area

• 30” (W) x 18” (H)

• Top will be 2” from bottom of sign holder

• Left edge will be 3” from walnut board

• Must be flush with plexiglass

• One horizontal plexiglass sign holder

• Sign holder will be centered left to right of cork board area

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Top of sign holder will be 3” from top of plexiglass

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• ARCYBER and NETCOM Logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” in depth), affixed to plexiglass board

• Logos will be 2” from bottom of plexiglass

• Logos will be centered below the cork board with a 2” gap in-between

Career Counselor Board Description:

• 6” (H) x 54” (W) black plexiglass (1/4” thick)

• 6 - 1” in depth Gold Standoffs, approximately 1/2” in diameter around the perimeter of the board mounting the panel to the wall

• Raised gold letters with black plexiglass accents, 1/2” in depth, centered horizontally and vertically per side

• Left Side: NETCOM (all Capital lettering, Times New Roman Bold, 3”)

• Right Side: CAREER COUNSELOR (all Capital lettering, Times New Roman Bold, 2”)

• Affixed to black plexiglass

• 1” gap between words

• Walnut Board

• 8” (H) x 6” (W)

• Walnut board will be mounted 2” from the right edge of M in NETCOM and centered vertically

• Mounted to plexiglass by screws from backside of plexiglass

• Satin finish on wood, rounded edges

• ARCYBER/NETCOM stacked logo

• 5” (H)

• Stacked Logo to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” thick), affixed to Walnut Board

• Stacked Logo will be centered horizontally and vertically on Walnut board

Chain of Command Board Description:

• 48” (H) x 125” (W)

• 1 black plexiglass panel – 48” (H) x 20” (W), 1/4” thick

• 4 1” in diameter, 1” in depth, Gold Standoffs around the perimeter of the panel mounting the panel to the wall

• Army Logo is 7” (H) centered on the panel

• Printed sticker adhered to raised black plexiglass (1/2” in depth), affixed to plexiglass

• 1” down from the top of the plexiglass

• Logo provided by NETCOM

• 3 vertical plexiglass sign holders

• Sign holders will be centered between left edge of plexiglass board and left edge of walnut enclosure

• 1 row of 3 holders vertically

• Each sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Bottom holder will be 1” from bottom of plexiglass

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8” x 10” photo

• Top edges of sign holder will secure together with small magnetic connectors

• 3” gap between holders in each row

• Top row will be 3” from Army logo

• 1 Walnut Enclosure 54”(H) x 9” (W) x 3.5” (D) mounted on the wall

• Will house LED lighting system

• 4” Letters

• Vertical line: NETCOM

• Black letters with clear plexiglass accents, 1/2" in depth, to allow light to shine through

• LED color will be Orange

• Satin finish on wood, rounded edges

• Should extend past black plexiglass 3” on top and bottom

• 1 black plexiglass panel – 48” (H) x 96” (W), ¼” thick

• 8 1” in diameter, 1” in depth, Gold Standoffs around the perimeter of the panel mounting the panel to the wall

• Top line: 3” lettering

• Raised gold letters with black plexiglass accents, 1/2” in depth, centered horizontally with panel

• Letters will begin 1” from the top of the panel

• Top Line: CHAIN OF COMMAND (all Capital lettering, Times New Roman

Bold)

• Affixed to black plexiglass

• 11 vertical plexiglass sign holders

• Sign holders will be centered left to right

• Two rows: 1st row has 6 holders, 2nd row has 5 holders

• Each sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8” x 10” photo

• Top edges of sign holder will secure together with small magnetic connectors

• 3.5” gap between holders in each row

• 2” gap between rows

• Top row will be 2” from lettering

• 14 vertical plexiglass sign holders

• Sign holders will be centered left to right

• Two rows of 7 each

• Each sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Mounted with gold standoffs (1/2” depth, 1/4” diameter) that are affixed to the black plexiglass

• Capable of supporting single 5” x 7” photo

• Top edges of sign holder will secure together with small magnetic connectors

• 3.5” gap between holders in each row

• 2” gap between rows

• Top row will be 2” from 2nd row of 8x10s

• Bottom row should be 2” from bottom of panel

• ARCYBER and NETCOM logos

• Logos will be 5” (H)

• Centered with holders in 2nd row of 8x10s

• ARCYBER logo will be 3” from left of first photo and NETCOM will be 3” from right of last photo in 2nd row

• Printed sticker adhered to raised black plexiglass (1/2” thick), affixed to plexiglass

• Logo provided by NETCOM

• Panels will be affixed to the wall with the Walnut Enclosure mounted in between the two panels in this order – 20” panel, wooden enclosure, 96” panel

Chaplain Board Description:

• 42” (H) x 84” (W) black plexiglass (1/4” thick)

• 8 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 55” (L) x 6” (W) x ¾” (D)

• Mounted 2” from top of plexiglass, centered horizontally above TV and Shelving, mounted by screws from backside of plexiglass

• Raised gold letters with black plexiglass accents, 4” (H), centered from top of the board to the bottom of the board

• CHAPLAIN’S SECTION (all Capital lettering, Times New Roman Bold)

• Affixed to wood

• 2” gap between words

• Satin finish on wood, rounded edges

• Three rows of shelving to hold various items, held vertical with gold bar.

• Bottom portion of shelving will be a strip of black plexiglass (1” in depth and ½” in thickness), affixed to the black plexiglass board

• Shelving will be 36” (L) and 9” (H)

• 1 Gold bar will be centered vertically on each row of shelving, edges of the gold bar will be 1” in depth and affixed to the black plexiglass

• No dividers necessary on each row, just one continuous row

• Top shelving will be 2” from bottom of walnut board

• Bottom shelf will be 2” from bottom of plexiglass

• Shelving will start 2 ½” from right edge of TV enclosure

• Shelving will end 2 ½” from right of the plexiglass

• 1.5” gap between rows of shelving

• 1 Walnut TV Enclosure

• Exterior enclosure will cover front edges (non-viewable areas) of TV

• Approximate dimension of TV 21.1” (H) and 37.4” (W) with 1” non-viewable perimeter

• Wall base must accept TV wall mount

• Tech access to TV must be accessible without removing the entire board

• Right edge of TV is approximately 41” from right edge of plexiglass and approximately 6” from the bottom of the plexiglass.

• TV and wall mount will be provided by NETCOM for exact measurements

• Satin finish on wood, rounded edges

• Logos

• 5” (H)

• Logos to be provided by NETCOM (Army, ARCYBER, NETCOM, Chaplain)

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to black plexiglass board

• Logos will be centered horizontally between left edge of TV enclosure and left edge of plexiglass

• Logos will be centered vertically between top and bottom edges of plexiglass with 3” gap in-between logos

Directory Board (Dual) Description:

• 30” (H) x 18” (W) black plexiglass (1/4” thick)

• 4 - 1/2” in depth Gold Standoffs, approximately 3/4” in diameter around the perimeter of the panel mounting the panel to the wall

• Two horizontal plexiglass sign holders

• Sign holders will be centered left to right

• Sign holders will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Bottom sign holder will be 1” from bottom of plexiglass

• 1” gap between holders

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• Logos

• 3 1/2” (H) (ARCYBER and NETCOM)

• 7” (H) (Army)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” in depth), affixed to plexiglass board

• Army logo will be 1” from top of plexiglass

• The ARCYBER and NETCOM logos will be centered vertically on the Army logo with a 1” gap in-between logos (Order left to right: ARCYBER, Army, NETCOM)

Directory Board (Single) Description:

• 24” (H) x 18” (W) black plexiglass (1/4” thick)

• 4 - 1/2” in depth Gold Standoffs, approximately 3/4” in diameter around the perimeter of the panel mounting the panel to the wall.

• One horizontal plexiglass sign holder

• Sign holder will be centered left to right

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Bottom of sign holder will be 2” from bottom of plexiglass

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• Logos

• 3 1/2” (H) (ARCYBER and NETCOM)

• 7” (H) (Army)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” in depth), affixed to plexiglass board

• Army logo will be 2” from top of plexiglass

• The ARCYBER and NETCOM logos will be centered vertically on the Army logo with a 1” gap in-between logos (Order left to right: ARCYBER, Army, NETCOM)

Former CoS Board Description:

• 6” (H) x 60” (W) black plexiglass (1/4” thick)

• 4 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the board mounting the panel to the wall

• Raised gold letters 2” (H), mounted on black plexiglass accents, 1/2” in depth, centered horizontally and vertically

• Letters will ¾” from top and bottom of black plexiglass

• 1st Line: FORMER (all Capital lettering, Times New Roman Bold)

• 2nd Line: CHIEFS OF STAFF (all Capital lettering, Times New Roman Bold)

• Affixed to black plexiglass

• 1/2” gap between lines

• 1” gap between words

• Panel will be 3” above the TV Enclosure and centered horizontally

• 1 Walnut TV Enclosure

• Exterior enclosure will cover sides and front edges (non-viewable areas) of TV

• Approximate dimension of TV 21.1” (H) and 37.4” (W) with 1” non-viewable perimeter

• Wall base must accept TV wall mount and exterior enclosure and be mounted to the wall

• Exterior enclosure must be removable without moving TV for tech access

• TV and wall mount will be provided by NETCOM for exact measurements

• Satin finish on wood, rounded edges

Former DCG Board Description:

• 6” (H) x 60” (W) black plexiglass (1/4” thick)

• 4 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• Raised gold letters, 2” (H), mounted on black plexiglass accents, 1/2" in depth, centered horizontally and vertically

• Letters will ¾” from top and bottom of black plexiglass

• 1st Line: FORMER (all Capital lettering, Times New Roman Bold)

• 2nd Line: DEPUTY COMMANDING GENERALS (all Capital lettering, Times New Roman

Bold)

• Affixed to black plexiglass

• 1/2” gap between lines

• 1” gap between words

• Panel will be 3” above the TV Enclosure and centered horizontally

• 1 Walnut TV Enclosure

• Exterior enclosure will cover sides and front edges (non-viewable areas) of TV

• Approximate dimension of TV 21.1” (H) and 37.4” (W) with 1” non-viewable perimeter

• Wall base must accept TV wall mount and exterior enclosure and be mounted to the wall

• Exterior enclosure must be removable without moving TV for tech access

• TV and wall mount will be provided by NETCOM for exact measurements

Former Leader Board 1 Description:

• 48” (H) x 144” (W)

• 2 Walnut board (sides) mounted to the wall

• Each 10” (W) x 50” (H) x 7.5” (D) (forms a box)

• Army Logo is 7” (H)

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to wood and centered left to right

• ARCYBER and NETCOM Logos are each 6” (H)

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to wood and centered left to right

• Logos will be 10” apart

• Logos to be provided by NETCOM

• 1 Walnut TV Enclosure 48” (H) x 58” (W) x 6.75” (D) mounted to the wall

• Exterior enclosure will cover front edges (non-viewable areas) of TV

• Approximate dimension of TV 26” (H) and 44.1” (W) with 1” non-viewable perimeter

• Wall base must accept TV wall mount and exterior enclosure

• Tech access to TV is required without removing the whole board

• TV and wall mount will be provided by NETCOM for exact measurements

• Satin finish on wood, rounded edges

• Gold lettering with black plexiglass accents

• Top line: 5” lettering

• Raised gold letters with black plexiglass accents, 1/2” in depth, affixed to walnut

TV enclosure

• Letters will be centered vertically from the top edge of the enclosure to the top edge of the TV and horizontally from the right edge of the walnut board to the right edge of the enclosure

• Top Line: NETCOM (all Capital lettering, Times New Roman Bold)

• Bottom line: 4” lettering

• Raised gold letters with black plexiglass accents, 1/2” in depth, affixed to walnut TV enclosure

• Letters will be centered vertically from the bottom edge of the TV to the bottom edge of the enclosure and horizontally from the right edge of the walnut board to the right edge of the enclosure

• Bottom Line: FORMER LEADERS (all Capital lettering, Times New Roman Bold)

• 2” gap between words

• Black plexiglass 48” (H) x 66” (W) 1/4” thick

• 6 1” in diameter Gold Standoffs around the perimeter of the panel

• Plexiglass to be mounted flush with walnut TV enclosure

• 10 vertical plexiglass sign holders

• Sign holders will be centered left to right

• Two rows of 5 holders each

• Top of first row of sign holders will be 11” from the top of the plexiglass

• Each sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8” x 10” photo

• Top edges of sign holder will secure together with small magnetic connectors

• 3.5” gap between holders in each row

• Bottom of second row will be 8” from the bottom edge of the plexiglass

• Raised gold letters

• Lettering will be 2 ¾” (H)

• Lettering will be mounted on plexiglass accents, 1/2” in depth

• 2” gap between words

• Lines will be centered left to right on the plexiglass

• Line 1: COMMANDING GENERALS

• Centered between the top edge of plexiglass and top of the first row of sign holders

• Line 2: SENIOR EXECUTIVE SERVICE

• Centered between the bottom of the first row of nameplates and the top of the second row of sign holders

• 10 gold nameplates with holders (1”x 8”)

• Black lettering, Times New Roman font

• First line will be larger font than second line

• Placed 1” below each sigh holder

• Nameplate 1:

• Top Line: MG MARIA B. BARRETT

• Bottom Line: NOVEMBER 2018-APRIL 2022

• Nameplate 2:

• Top Line: MG JOHN W. BAKER

• Bottom Line: AUGUST 2016-NOVEMBER 2018

• Nameplate 3:

• Top Line: MG JOHN B. MORRISON

• Bottom Line: APRIL 2014-JULY 2016

• Nameplate 4:

• Top Line: MG ALAN R. LYNN

• Bottom Line: AUGUST 2012-AUGUST 2013

• Nameplate 5:

• Top Line: MG JENNIFER L. NAPPER

• Bottom Line: SEPTEMBER 2010-AUGUST 2012

• Nameplate 6:

• Top Line: MR. LEONARD J. MABIUS

• Bottom Line: JULY 1979-DECEMBER 1994

• Nameplate 7:

• Top Line: DR. MICHAEL GENTRY

• Bottom Line: FEBRUARY 1995-SEPTEMBER 2005

• Nameplate 8:

• Top Line: DR. DANIEL Q. BRADFORD

• Bottom Line: APRIL 2007-DECEMBER 2017

• Nameplate 9:

• Top Line: MR. DOVARIUS L. PEOPLES

• Bottom Line: APRIL 2018-APRIL 2019

• Nameplate 10:

• BLANK

Former Leader Board 2 Description:

• 48” (H) x 144” (W)

• 2 Walnut board (sides) mounted

• 10” (W) x 50” (H) x 7.5” (D) (forms a box)

• Army Logo is 7” (H)

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to wood

• ARCYBER and NETCOM Logos are each 6” (H)

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to wood

• Logos will be 10” apart

• Logos to be provided by NETCOM

• 1 Walnut TV Enclosure 48”(H) x 58” (W) x 6.75” (D) mounted

• Exterior enclosure will cover front edges (non-viewable areas) of TV

• Approximate dimension of TV 26” (H) and 44.1” (W) with 1” non-viewable perimeter

• Wall base must accept TV wall mount and exterior enclosure

• Tech access to TV is required without removing the whole board

• TV and wall mount will be provided by NETCOM for exact measurements

• Satin finish on wood, rounded edges

• Gold lettering with black plexiglass accents

• Top line: 5” lettering

• Raised gold letters with black plexiglass accents, 1/2” in depth, affixed to walnut

TV enclosure

• Letters will be centered vertically from the top edge of enclosure to the top edge of the TV and horizontally from the right edge of the walnut board to the right edge of the enclosure

• Top Line: NETCOM (all Capital lettering, Times New Roman Bold)

• Bottom line: 4” lettering

• Raised gold letters with black plexiglass accents, 1/2” in depth, affixed to walnut TV enclosure

• Letters will be centered vertically from the bottom edge of the TV to the bottom edge of the enclosure and horizontally from the right edge of the walnut board to the right edge of the enclosure

• Bottom Line: FORMER LEADERS (all Capital lettering, Times New Roman Bold)

• 2” gap between words

• Black plexiglass 48” (H) x 66” (W) 1/4" thick

• 6 1” in depth Gold Standoffs around the perimeter of the panel

• Plexiglass to be mounted flush with walnut TV enclosure

• 10 vertical plexiglass sign holders

• Sign holders will be centered left to right

• Two rows of 5 holders each

• Top of first row of sign holders will be 11” from the top of the plexiglass

• Each sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8” x 10” photo

• Top edges of sign holder will secure together with small magnetic connectors

• 3.5” gap between holders in each row

• Bottom of second row will be 8” from the bottom edge of the plexiglass

• Raised gold letters

• Lettering will be 2 ¾” (H)

• Lettering will be mounted on plexiglass accents, 1/2” in depth

• 2” gap between words

• Lines will be centered left to right on the plexiglass

• Line 1: COMMAND CHIEF WARRANT OFFICERS

• Centered between the top edge of plexiglass and top of the first row of sign holders

• Line 2: COMMAND SERGEANTS MAJOR

• Centered between the bottom of the first row of nameplates and the top of the second row of sign holders

• 10 gold nameplates with holders (1”x 8”)

• Black lettering. Times New Roman font

• First line will be larger font than second line

• Placed 1” below each sigh holder

• Nameplate 1:

• Top Line: CSM RICHARD KNOTT

• Bottom Line: JUNE 2020-APRIL 2021

• Nameplate 2:

• Top Line: CSM JENNIFER TAYLOR

• Bottom Line: JUNE 2018-MAY 2020

• Nameplate 3:

• Top Line: CSM DARRIS CURRY

• Bottom Line: JULY 2016-JUNE 2018

• Nameplate 4:

• Top Line: CSM STEPHFON WATSON

• Bottom Line: JUNE 2014-JULY 2016

• Nameplate 5:

• Top Line: CSM EARL B. ALLEN

• Bottom Line: JUNE 2013-APRIL 2014

• Nameplate 6:

• Top Line: CW5 JAMES A. EBELER

• Bottom Line: JUNE 2014-SEPTEMBER 2016

• Nameplate 7:

• Top Line: CW5 TAMMY D. SURRATT

• Bottom Line: SEPTEMBER 2016-APRIL 2020

• Nameplate 8:

• Top Line: CW5 LINC W. MCCOY

• Bottom Line: APRIL 2020-APRIL 2021

• Nameplate 9:

• BLANK

• Nameplate 10:

• BLANK

HHC Header Description::

• 6” (H) x 48” (W) black plexiglass (1/4” thick)

• 4 - 1” in depth Gold Standoffs, approximately 1/2” in diameter around the perimeter of the board mounting the panel to the wall

• Raised gold letters, 3” (H), with black plexiglass accents, 1/2” in depth, centered horizontally and vertically

• Raised gold letters will be mounted to plexiglass

• Right Side: HHC, NETCOM (all Capital lettering, Times New Roman Bold)

• 1” gap between words

• ARCYBER/NETCOM stacked logo

• 5” (H)

• Logo to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to walnut board

• Logo will be centered horizontally and vertically on walnut board

• Walnut Board

• 8” (H) x 6” (W)

• Mounted 2” from left side of plexiglass, centered vertically

• Mounted to plexiglass by screws from backside of plexiglass

Mabius Conference Room Board Description:

• 24” (H) x 72” (W) black plexiglass (1/4” thick)

• 6 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2" in depth, centered horizontally and vertically

• Letters will be 3” from top of black plexiglass

• 1st Line: LEONARD J. MABIUS (all Capital lettering, Times New Roman Bold)

• 3” gap between lines

• 2nd Line: CONFERENCE CENTER (all Capital lettering, Times New Roman Bold)

• Affixed to black plexiglass

• 2” gap between words

• ARMY, ARCYBER and NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to black plexiglass board

• Logos will be centered horizontally to the black plexiglass

• Logos will be positioned 3” from the bottom of the black plexiglass and 3” from the bottom of the

2d Line

• Logos will have a 4” gap in-between each one

MEO Board Description:

• 42” (H) x 78” (W) black plexiglass (1/4” thick)

• 6 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 44” (H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2” in depth, centered from top of the board to the top of the Army logo

• MEO (all Capital lettering, Times New Roman Bold)

• Affixed to wood

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to wood

• Army logo is affixed to Walnut wood 1” above bottom of Walnut board

• Satin finish on wood, rounded edges

• Two sections for poster boards (25”x37”) sandwiched between two sheets of clear plexiglass (1/8” thick), held together with gold standoffs (1/2” depth, 1/2” diameter)that are affixed to the black plexiglass.

• Must be capable of supporting poster sizes (24”x36”)

• Left poster will be 1” from the wood

• Right poster will be 1” from the right edge of the black plexiglass

• Posters will begin 3” from bottom edge of plexiglass

• Two rows of shelving to hold various items, held vertical with gold bar.

• Bottom portion of shelving will be a strip of black plexiglass (½” in depth and ½” in thickness), affixed to black plexiglass board

• Shelving will be 15” (L) and 9” (H)

• 1 Gold bar will be centered vertically on each row of shelving, edges of the gold bar will be ½” in depth and affixed to black plexiglass

• No dividers necessary on each row, just one continuous row

• Bottom shelf will be in line with the bottom of the two posters

• 2” gap between rows of shelving

• One horizontal plexiglass sign holder

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• 2” above top row of shelving

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• ARCYBER and NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2" in depth, affixed to main black plexiglass board

• 2” above sign holder

• Both logos will be centered horizontally between two posters with 2” gap in-between

MEO Header Description:

• 6” (H) x 48” (W) black plexiglass (1/4” thick)

• 6 - 1” in depth Gold Standoffs, approximately 1/2” in diameter around the perimeter of the board mounting the panel to the wall

• Raised gold letters with black plexiglass accents, 1/2" in depth, centered horizontally and vertically per side

• Left Side: NETCOM (all Capital lettering, Times New Roman Bold, 3”)

• Right Side: MEO (all Capital lettering, Times New Roman Bold, 2”)

• Affixed to black plexiglass

• ARCYBER/NETCOM stacked logos

• 5” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to Walnut board

• Logos will be centered horizontally and vertically to walnut

• Walnut Board

• 8” (H) x 6” (W)

• Walnut board will be mounted 2” from the right edge of M in NETCOM and centered vertically

• Mounted to plexiglass by screws from backside of plexiglass

NETCOM MAP Description:

• 60” (H) x 100” (W) black plexiglass (1/4” thick), rounded edges

• 60” (H) x 100” (W) clear plexiglass (1/4” thick), rounded edges

• Metal casing behind black plexiglass that serves to mount the complete product to the wall and house LED lighting system (yellow in color)

• Switch on exterior of the metal casing to turn off LED lights (located bottom right corner).

• Power supply will be compatible with standard American outlets

• 6 - 1/2” in depth Gold Standoffs, approximately 1” in diameter joins black and clear sheets of plexiglass

• Gold metal lettering, centered horizontally and vertically

• Gold metal will be 1/8” in depth

• Top line: NETWORK ENTERPRISE TECHNOLOGY COMMAND (all Capital lettering, Times

New Roman Bold, 2”)

• 2nd line: THE VOICE OF THE ARMY (all Capital lettering, Times New Roman Bold, 2”)

• 3rd line: SINCE 1918 (all Capital lettering, Times New Roman Bold, 1.5”)

• Affixed to clear plexiglass

• 1” gap between words

• Gold metal for map cutout of each continent

• Continents are affixed to clear plexiglass accents (to let lighting through)

• Lighting should be seen around perimeter of continents

• Black plexiglass is cutout in shape of each continent

• Clear plexiglass accents are slightly larger than the black plexiglass cutouts and affixed to the black plexiglass

• Map should be centered left to right and between 1st and 2nd lines

• ARMY/ARCYBER/NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised clear plexiglass (1/2” thick), affixed to clear plexiglass board

• Logos will be centered 2” from each edge

SAFETY Board Description:

• 6 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 44”(H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2” in depth, centered from top of the board to the top of the Army logo

• SAFETY (all Capital lettering, Times New Roman Bold)

• Affixed to wood

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM.

• Printed sticker adhered to raised black plexiglass (1/2” thick)

• Army logo is affixed to walnut board 1” above bottom of walnut board and centered left to right

• Satin finish on wood, rounded edges

• Two sections for poster boards (25”x37”) sandwiched between two sheets of clear plexiglass (1/8” thick), held together with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass.

• Must be capable of supporting poster sizes (24”x36”)

• Left poster will be 1” from the wood

• Right poster will be 1” from the right edge of the first poster

• Posters will begin 3” from bottom edge of plexiglass

• Two vertical plexiglass sign holders

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• 1st sign holder will be 1” from right edge of second poster

• 1st sign holder will 4” down from the top of the posters

• 2nd sign holder will begin 5.5” from the right edge of the second poster and 4” up from the bottom of the posters

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• ARCYBER and NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to black plexiglass panel

• NETCOM logo will be 2” from the right edge of black plexiglass and 2” from the top

• ARCYBER logo will be positioned to the left of the NETCOM logo with 2” gap in-between

SHARP Board Description:

• 6 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 44”(H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2" in depth, centered from top of the board to the top of the Army logo

• SHARP (all Capital lettering, Times New Roman Bold)

• Affixed to board

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” thick)

• Army logo is affixed to Walnut board 1” above bottom of the board and centered left to right

• Satin finish on wood, rounded edges

• Two sections for poster boards (25”x37”) sandwiched between two sheets of clear plexiglass (1/8” thick), held together with gold standoffs (1/2” depth, 1/2” diameter)that are affixed to the black plexiglass.

• Must be capable of supporting poster sizes (24”x36”)

• Left poster will be 1” from the wood

• Right poster will be 1” from the right edge of the black plexiglass

• Posters will begin 3” from bottom edge of plexiglass

• Two rows of shelving to hold various items, held vertical with gold bar.

• Bottom portion of shelving will be a strip of black plexiglass (½” in depth and ½” in thickness), affixed to black plexiglass board

• Shelving will be 15” (L) and 9” (H) centered between poster boards

• 1 Gold bar will be centered vertically on each row of shelving, edges of the gold bar will be ½” in depth and affixed to black plexiglass

• No dividers necessary on each row, just one continuous row

• Bottom shelf will be in line with the bottom of the two posters

• 2” gap between rows of shelving

• One horizontal plexiglass sign holder

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• 2” above top row of shelving

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• ARCYBER and NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to black plexiglass panel

• 2” above sign holder

• Both logos will be centered horizontally between two posters with 2” gap in-between

Staff Board Description:

• 42” (H) x 44” (W) black plexiglass (1/4” thick)

• 4 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the panel mounting the panel to the wall

• 1 Walnut board 44” (H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2” in depth, centered from top of the board to the top of the Army logo

• NETCOM (all Capital lettering, Times New Roman Bold)

• Affixed to board

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass (1/2” in depth)

• Army logo is affixed to Walnut board 1” above bottom of the board and centered left to right

• Satin finish on wood, rounded edges

• One section for poster boards (25”x37”) sandwiched between two sheets of clear plexiglass (1/8” thick), held together with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass.

• Must be capable of supporting poster sizes (24”x36”)

• Poster will be centered horizontally to the right edge of walnut board and right edge of black plexiglass

• Poster will be centered vertically from top and bottom edges of plexiglass

TIMS Board Description:

• 6 - 1” in depth Gold Standoffs, approximately 1” in diameter around the perimeter of the board mounting the panel to the wall

• 1 Walnut board 44” (H) x 6” (W) x ¾” (D)

• Mounted 3” from left of plexiglass, centered vertically, mounted by screws from backside of plexiglass

• Raised gold letters, 4” (H), with black plexiglass accents, 1/2" in depth, centered from top of the board to the top of the Army logo

• TIMS (all Capital lettering, Times New Roman Bold)

• Affixed to board

• 1” to 1 ½” gap between letters

• Army logo is 4” (H), image to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth

• Army logo is affixed to Walnut board 1” above bottom of Walnut board and centered left to right

• Satin finish on wood, rounded edges

• Two sections for poster boards (25”x37”) sandwiched between two sheets of clear plexiglass (1/8” thick), held together with gold standoffs (1/2” depth, 1/2” diameter)that are affixed to the black plexiglass.

• Must be capable of supporting poster sizes (24”x36”)

• Left poster will be 1” from the wood

• Right poster will be 1” from the right edge of the first poster

• Posters will begin 3” from bottom edge of plexiglass

• Two vertical plexiglass sign holders

• Sign holder will be one continuous sheet of plexiglass (forming a U-shape at the bottom)

• 1st sign holder will be 1” from right edge of second poster

• 1st sign holder will 4” down from the top of the posters

• 2nd sign holder will begin 5.5” from the right edge of the second poster and 4” up from the bottom of the posters

• Mounted with gold standoffs (1/2” depth, 1/2” diameter) that are affixed to the black plexiglass

• Capable of supporting single 8.5” x 11” piece of paper

• Top edges of sign holder will secure together with small magnetic connectors

• ARCYBER and NETCOM logos

• 4” (H)

• Logos to be provided by NETCOM

• Printed sticker adhered to raised black plexiglass, 1/2” in depth, affixed to main black plexiglass board

• NETCOM logo will be 2” from the right edge of black plexiglass and 2” from the top

• ARCYBER logo will be positioned to the left of the NETCOM logo with 2” gap in-between

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 1 0009 SC CO NETCOM 9TH SC(A

GREELY HALL

BLDG 61801, ROOM 3206

ATTN: CSM JASON MCCOY

FORT HUACHUCA AZ 85613

FOB: Destination

W61DEG

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020 52.204-7 System for Award Management OCT 2018 52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other Covered Entities

NOV 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2021

52.219-8 Utilization of Small Business Concerns OCT 2018 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2022 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020 52.222-50 Combating Trafficking in Persons NOV 2021 52.223-15 Energy Efficiency in Energy-Consuming Products MAY 2020 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

NOV 2021

52.243-1 Changes--Fixed Price AUG 1987 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials.

DEC 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Antiterrorism Awareness Training for Contractors. FEB 2019 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

DEC 2019

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations

SEP 2019

252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.247-7023 Alt II Transportation of Supplies by Sea (FEB 2019) Alternate II FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--

Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision.