W91QF5-15-R-0006-0002.pdf

0010640854-0001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to:

1. Respond to industry questions

2. Incorporate the Wage Determination

1. CONTRACT ID CODE PAGE OF PAGES

J 1 34

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Sep-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91QF5-15-R-0006

X 9B. DATED (SEE ITEM 11)

10-Sep-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Sep-2015

CODE

MICC FORT LEE

1830 QUARTERMASTER ROAD, BLDG 7124

FORT LEE VA 23801 1606

W91QF5 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W91QF5-15-R-0006

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

WAGE DETERMINATION

WD 05-2545 (Rev.-20) was first posted on www.wdol.gov on 07/14/2015

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2545

Daniel W. Simms Division of | Revision No.: 20

Director Wage Determinations| Date Of Revision: 07/08/2015

Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Virginia

Area: Virginia Counties of Albemarle, Amelia, Brunswick, Buckingham, Caroline, Charles City, Charlotte, Charlottesville, Chesterfield, Colonial Hghts, Cumberland, Dinwiddie, Essex, Fluvanna, Goochland, Greensville, Hanover, Henrico, Hopewell, King William, King and Queen, Lancaster, Louisa, Lunenburg, Mecklenburg, Middlesex, New Kent, Northumberland, Nottoway, Orange, Petersburg, Powhatan, Prince Edward, Prince George, Richmond, Sussex, Westmoreland

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 14.48

01012 - Accounting Clerk II 16.47

01013 - Accounting Clerk III 18.43

01020 - Administrative Assistant 21.41

01040 - Court Reporter 20.21

01051 - Data Entry Operator I 12.11

01052 - Data Entry Operator II 13.55

01060 - Dispatcher, Motor Vehicle 18.37

01070 - Document Preparation Clerk 13.44

01090 - Duplicating Machine Operator 13.44

01111 - General Clerk I 12.06

01112 - General Clerk II 13.27

01113 - General Clerk III 17.46

01120 - Housing Referral Assistant 19.65

01141 - Messenger Courier 12.83

01191 - Order Clerk I 15.00

01192 - Order Clerk II 16.38

01261 - Personnel Assistant (Employment) I 15.94

01262 - Personnel Assistant (Employment) II 18.37

01263 - Personnel Assistant (Employment) III 21.22

01270 - Production Control Clerk 21.22

01280 - Receptionist 15.28

01290 - Rental Clerk 15.94

01300 - Scheduler, Maintenance 15.76

01311 - Secretary I 15.76

01312 - Secretary II 17.63

01313 - Secretary III 19.65

01320 - Service Order Dispatcher 16.34

01410 - Supply Technician 21.41

01420 - Survey Worker 18.37

01531 - Travel Clerk I 12.84

01532 - Travel Clerk II 13.64

01533 - Travel Clerk III 14.52

01611 - Word Processor I 13.44

01612 - Word Processor II 15.94

01613 - Word Processor III 18.37

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 22.01

05010 - Automotive Electrician 20.97

05040 - Automotive Glass Installer 19.97

05070 - Automotive Worker 19.97

05110 - Mobile Equipment Servicer 17.96

05130 - Motor Equipment Metal Mechanic 21.96

05160 - Motor Equipment Metal Worker 19.97

05190 - Motor Vehicle Mechanic 22.89

05220 - Motor Vehicle Mechanic Helper 16.96

05250 - Motor Vehicle Upholstery Worker 18.96

05280 - Motor Vehicle Wrecker 19.97

05310 - Painter, Automotive 20.97

05340 - Radiator Repair Specialist 19.97

05370 - Tire Repairer 13.64

05400 - Transmission Repair Specialist 21.96

07000 - Food Preparation And Service Occupations

07010 - Baker 11.80

07041 - Cook I 9.94

07042 - Cook II 11.11

07070 - Dishwasher 8.68

07130 - Food Service Worker 9.72

07210 - Meat Cutter 15.54

07260 - Waiter/Waitress 9.06

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 19.83

09040 - Furniture Handler 13.92

09080 - Furniture Refinisher 19.83

09090 - Furniture Refinisher Helper 16.21

09110 - Furniture Repairer, Minor 17.87

09130 - Upholsterer 19.83

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 10.42

11060 - Elevator Operator 10.42

11090 - Gardener 13.71

11122 - Housekeeping Aide 10.45

11150 - Janitor 11.73

11210 - Laborer, Grounds Maintenance 11.31

11240 - Maid or Houseman 9.37

11260 - Pruner 9.79

11270 - Tractor Operator 12.92

11330 - Trail Maintenance Worker 11.31

11360 - Window Cleaner 12.61

12000 - Health Occupations

12010 - Ambulance Driver 17.35

12011 - Breath Alcohol Technician 18.55

12012 - Certified Occupational Therapist Assistant 25.05

12015 - Certified Physical Therapist Assistant 20.08

12020 - Dental Assistant 15.73

12025 - Dental Hygienist 37.02

12030 - EKG Technician 22.01

12035 - Electroneurodiagnostic Technologist 22.01

12040 - Emergency Medical Technician 17.35

12071 - Licensed Practical Nurse I 18.85

12072 - Licensed Practical Nurse II 21.09

12073 - Licensed Practical Nurse III 23.50

12100 - Medical Assistant 14.00

12130 - Medical Laboratory Technician 17.06

12160 - Medical Record Clerk 14.26

12190 - Medical Record Technician 15.95

12195 - Medical Transcriptionist 14.13

12210 - Nuclear Medicine Technologist 30.44

12221 - Nursing Assistant I 9.86

12222 - Nursing Assistant II 11.02

12223 - Nursing Assistant III 12.09

12224 - Nursing Assistant IV 13.58

12235 - Optical Dispenser 19.85

12236 - Optical Technician 15.18

12250 - Pharmacy Technician 13.59

12280 - Phlebotomist 13.57

12305 - Radiologic Technologist 24.97

12311 - Registered Nurse I 23.80

12312 - Registered Nurse II 29.10

12313 - Registered Nurse II, Specialist 29.10

12314 - Registered Nurse III 35.20

12315 - Registered Nurse III, Anesthetist 35.21

12316 - Registered Nurse IV 42.20

12317 - Scheduler (Drug and Alcohol Testing) 24.00

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 19.59

13012 - Exhibits Specialist II 24.26

13013 - Exhibits Specialist III 29.67

13041 - Illustrator I 20.45

13042 - Illustrator II 25.32

13043 - Illustrator III 30.97

13047 - Librarian 27.53

13050 - Library Aide/Clerk 11.82

13054 - Library Information Technology Systems 24.86

Administrator

13058 - Library Technician 17.11

13061 - Media Specialist I 17.94

13062 - Media Specialist II 20.07

13063 - Media Specialist III 22.38

13071 - Photographer I 15.30

13072 - Photographer II 17.12

13073 - Photographer III 21.21

13074 - Photographer IV 25.94

13075 - Photographer V 31.38

13110 - Video Teleconference Technician 17.64

14000 - Information Technology Occupations

14041 - Computer Operator I 15.61

14042 - Computer Operator II 17.46

14043 - Computer Operator III 19.46

14044 - Computer Operator IV 21.63

14045 - Computer Operator V 23.95

14071 - Computer Programmer I (see 1) 24.99

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 15.61

14160 - Personal Computer Support Technician 21.63

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 33.42

15020 - Aircrew Training Devices Instructor (Rated) 37.77

15030 - Air Crew Training Devices Instructor (Pilot) 45.27

15050 - Computer Based Training Specialist / Instructor 33.42

15060 - Educational Technologist 30.06

15070 - Flight Instructor (Pilot) 45.27

15080 - Graphic Artist 24.04

15090 - Technical Instructor 22.71

15095 - Technical Instructor/Course Developer 27.77

15110 - Test Proctor 18.33

15120 - Tutor 18.32

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.11

16030 - Counter Attendant 9.10

16040 - Dry Cleaner 11.58

16070 - Finisher, Flatwork, Machine 9.11

16090 - Presser, Hand 9.11

16110 - Presser, Machine, Drycleaning 9.11

16130 - Presser, Machine, Shirts 9.11

16160 - Presser, Machine, Wearing Apparel, Laundry 9.11

16190 - Sewing Machine Operator 12.42

16220 - Tailor 13.17

16250 - Washer, Machine 9.82

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 19.53

19040 - Tool And Die Maker 23.40

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 16.19

21030 - Material Coordinator 21.72

21040 - Material Expediter 21.72

21050 - Material Handling Laborer 13.82

21071 - Order Filler 13.30

21080 - Production Line Worker (Food Processing) 16.19

21110 - Shipping Packer 15.18

21130 - Shipping/Receiving Clerk 15.18

21140 - Store Worker I 11.73

21150 - Stock Clerk 16.37

21210 - Tools And Parts Attendant 16.19

21410 - Warehouse Specialist 16.19

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 26.15

23021 - Aircraft Mechanic I 24.99

23022 - Aircraft Mechanic II 26.15

23023 - Aircraft Mechanic III 27.35

23040 - Aircraft Mechanic Helper 19.46

23050 - Aircraft, Painter 24.03

23060 - Aircraft Servicer 21.46

23080 - Aircraft Worker 22.61

23110 - Appliance Mechanic 18.89

23120 - Bicycle Repairer 15.54

23125 - Cable Splicer 24.02

23130 - Carpenter, Maintenance 19.52

23140 - Carpet Layer 21.54

23160 - Electrician, Maintenance 24.34

23181 - Electronics Technician Maintenance I 22.39

23182 - Electronics Technician Maintenance II 23.85

23183 - Electronics Technician Maintenance III 25.03

23260 - Fabric Worker 17.87

23290 - Fire Alarm System Mechanic 19.82

23310 - Fire Extinguisher Repairer 16.34

23311 - Fuel Distribution System Mechanic 19.82

23312 - Fuel Distribution System Operator 16.08

23370 - General Maintenance Worker 18.27

23380 - Ground Support Equipment Mechanic 24.99

23381 - Ground Support Equipment Servicer 21.46

23382 - Ground Support Equipment Worker 22.61

23391 - Gunsmith I 16.34

23392 - Gunsmith II 18.65

23393 - Gunsmith III 20.79

23410 - Heating, Ventilation And Air-Conditioning 21.80

Mechanic

23411 - Heating, Ventilation And Air Contditioning 25.04

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 20.48

23440 - Heavy Equipment Operator 20.19

23460 - Instrument Mechanic 25.41

23465 - Laboratory/Shelter Mechanic 19.81

23470 - Laborer 12.44

23510 - Locksmith 22.37

23530 - Machinery Maintenance Mechanic 27.28

23550 - Machinist, Maintenance 20.48

23580 - Maintenance Trades Helper 16.98

23591 - Metrology Technician I 25.41

23592 - Metrology Technician II 26.58

23593 - Metrology Technician III 27.81

23640 - Millwright 22.89

23710 - Office Appliance Repairer 20.01

23760 - Painter, Maintenance 19.52

23790 - Pipefitter, Maintenance 21.83

23810 - Plumber, Maintenance 19.74

23820 - Pneudraulic Systems Mechanic 20.79

23850 - Rigger 20.79

23870 - Scale Mechanic 18.65

23890 - Sheet-Metal Worker, Maintenance 20.48

23910 - Small Engine Mechanic 17.94

23931 - Telecommunications Mechanic I 23.94

23932 - Telecommunications Mechanic II 25.39

23950 - Telephone Lineman 24.65

23960 - Welder, Combination, Maintenance 19.82

23965 - Well Driller 24.78

23970 - Woodcraft Worker 20.79

23980 - Woodworker 16.34

24000 - Personal Needs Occupations

24570 - Child Care Attendant 9.74

24580 - Child Care Center Clerk 13.37

24610 - Chore Aide 8.10

24620 - Family Readiness And Support Services 14.31

Coordinator

24630 - Homemaker 14.76

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 21.28

25040 - Sewage Plant Operator 19.90

25070 - Stationary Engineer 21.28

25190 - Ventilation Equipment Tender 16.98

25210 - Water Treatment Plant Operator 19.90

27000 - Protective Service Occupations

27004 - Alarm Monitor 17.29

27007 - Baggage Inspector 12.22

27008 - Corrections Officer 18.21

27010 - Court Security Officer 21.30

27030 - Detection Dog Handler 13.67

27040 - Detention Officer 18.21

27070 - Firefighter 22.67

27101 - Guard I 12.22

27102 - Guard II 13.67

27131 - Police Officer I 23.07

27132 - Police Officer II 25.67

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 10.21

28042 - Carnival Equipment Repairer 10.86

28043 - Carnival Equpment Worker 8.31

28210 - Gate Attendant/Gate Tender 13.72

28310 - Lifeguard 11.95

28350 - Park Attendant (Aide) 15.35

28510 - Recreation Aide/Health Facility Attendant 11.10

28515 - Recreation Specialist 17.97

28630 - Sports Official 12.22

28690 - Swimming Pool Operator 15.22

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.90

29020 - Hatch Tender 18.90

29030 - Line Handler 18.90

29041 - Stevedore I 17.64

29042 - Stevedore II 20.08

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 36.49

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.17

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.72

30021 - Archeological Technician I 17.41

30022 - Archeological Technician II 19.48

30023 - Archeological Technician III 24.13

30030 - Cartographic Technician 24.13

30040 - Civil Engineering Technician 24.53

30061 - Drafter/CAD Operator I 17.41

30062 - Drafter/CAD Operator II 19.48

30063 - Drafter/CAD Operator III 21.71

30064 - Drafter/CAD Operator IV 26.72

30081 - Engineering Technician I 16.82

30082 - Engineering Technician II 18.88

30083 - Engineering Technician III 21.11

30084 - Engineering Technician IV 26.16

30085 - Engineering Technician V 32.00

30086 - Engineering Technician VI 38.72

30090 - Environmental Technician 20.53

30210 - Laboratory Technician 23.16

30240 - Mathematical Technician 24.14

30361 - Paralegal/Legal Assistant I 18.62

30362 - Paralegal/Legal Assistant II 24.16

30363 - Paralegal/Legal Assistant III 29.54

30364 - Paralegal/Legal Assistant IV 35.74

30390 - Photo-Optics Technician 24.14

30461 - Technical Writer I 25.23

30462 - Technical Writer II 30.85

30463 - Technical Writer III 34.14

30491 - Unexploded Ordnance (UXO) Technician I 23.20

30492 - Unexploded Ordnance (UXO) Technician II 28.06

30493 - Unexploded Ordnance (UXO) Technician III 33.64

30494 - Unexploded (UXO) Safety Escort 23.20

30495 - Unexploded (UXO) Sweep Personnel 23.20

30620 - Weather Observer, Combined Upper Air Or (see 2) 21.71

Surface Programs

30621 - Weather Observer, Senior (see 2) 24.13

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 10.61

31030 - Bus Driver 14.82

31043 - Driver Courier 13.21

31260 - Parking and Lot Attendant 8.55

31290 - Shuttle Bus Driver 13.39

31310 - Taxi Driver 10.85

31361 - Truckdriver, Light 14.22

31362 - Truckdriver, Medium 17.89

31363 - Truckdriver, Heavy 18.44

31364 - Truckdriver, Tractor-Trailer 18.44

99000 - Miscellaneous Occupations

99030 - Cashier 9.69

99050 - Desk Clerk 10.71

99095 - Embalmer 27.31

99251 - Laboratory Animal Caretaker I 9.89

99252 - Laboratory Animal Caretaker II 10.65

99310 - Mortician 31.44

99410 - Pest Controller 17.91

99510 - Photofinishing Worker 13.94

99710 - Recycling Laborer 15.35

99711 - Recycling Specialist 17.59

99730 - Refuse Collector 13.75

99810 - Sales Clerk 13.16

99820 - School Crossing Guard 13.08

99830 - Survey Party Chief 19.56

99831 - Surveying Aide 12.80

99832 - Surveying Technician 17.53

99840 - Vending Machine Attendant 12.86

99841 - Vending Machine Repairer 15.27

99842 - Vending Machine Repairer Helper 12.86

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 1 week paid vacation after 1 year of service with a contractor or successor; 2 weeks after 2 years; 3 weeks after 5 years; and 4 weeks after 15 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther

King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor

Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}

When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

The following have been modified:

RESPONSE TO INDUSTRY QUESTIONS

1) Question: Does the attached excel file format for VOLUME III pricing meet the proper requirement for submission see attached file titled 'W91QF5-15-R-0006 Volume III Pricingrev1.xlsx'?

Answer: Use the pricing Work Sheets that are provided in the solicitation on pages 63 through 75.

2) Question: Does SF1449 need to be completed and returned with VOLUME I, II and III as part of the returned complete proposal?

Answer: Yes

3) Question: Page 9, Section 2 references 'The Past Performance Questionnaire, Attachment 4'.

This attachment does not appear to be attached as a document on the FEDBIZOPPS Solicitation page. Can you tell me where this attachment is located on the Solicitation page?

Answer: See attachment in Amendment 1.

4) Question: Page 10, VOLUME, Item 1 references 'SF33 (including acknowledgment of Amendments, Section B and the pricing worksheet under Attachment 5.' This attachment does not appear to be attached as a document on the FEDBIZOPPS Solicitation page. Can you tell me where this attachment is located on the Solicitation page? In addition after reviewing an SF33 template it appears a majority of the information required is information from the contracting office. It appears that the SF33 needs to be filled out by the contracting office, attached as a complete file with the contractor required to complete Items 13 through 18, including a signature. Is this correct?

Answer: Standard Form 33 (SF33) has been replaced with SF 1449.

5) Question: Page 63 through 75 are pricing worksheets. Are these to be completed with pricing in addition to the Clin/Item price request located on pages 3 and 4? Do you want both or just the worksheets?

Answer: Complete both on pages 3, 4 and 63 through 75.

6) Question: Is this a Base year with 4 option year proposal or a 10 month proposal. I question this since ITEM 1 refers to base year and I want to be 100% in filling out the proposal.

Answer: See PWS paragraph C-1.5.

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

PERFORMANCE WORK STATEMENT

Performance Work Statement (PWS)

Compressed Gases, Welding and Metalworking Supplies

Metalworking Equipment Maintenance/Repair

C-1. GENERAL INFORMATION

C-1.1 Introduction: This is a non-personal services contract to provide delivery of selected compressed gases, welding/metalworking supplies, and to provide maintenance and repair of compressed gas cylinders, gas systems, welding and metalworking equipment.

C-1.2 Background: USA-Ordnance School has nine different training divisions that require compressed gases in order to conduct training. Additionally, metalworking and welding supplies are required in direct support of courses 702-91E10/2161; 702-91E10/1316; 91E10 PH2; 91E30; 914A WOBC/WOAC and H8 ASI training conducted at the US Army Ordnance School, Track, Metalworking and Recovery Training Department. The requirement for the selected services and supplies have been previously contracted under IDIQ Supply/Product contract for the past five years at Fort Lee, VA.

C-1.3 Objectives: Procure compressed gases, welding and metalworking supplies and equipment maintenance for machinist, welding and gas equipment in support of Army and Marine Corps functional training and other Ordnance School requirements to include special fabrication and repair projects.

C-1.4 Scope of Work:

C-1.4.1: The Contractor shall provide all necessary labor, supervision, equipment, supplies, and materials to support maintenance and repair of welding and metalworking equipment, compressed gas cylinders and compressed gas systems located at USA-Ordnance School, Fort Lee, VA.

C-1.4.2: The Contractor shall acquire and deliver requested welding and metalworking materials, equipment, parts, and supplies for support of the Metalworking Services Division and H8 ASI Recovery training.

C-1.4.3: The Contractor shall acquire and deliver compressed gases for use by the Ordnance School’s nine training divisions.

C-1.5 Period of Performance: This contract will include one (1) Base Period of 12 months. The Period of Performance shall read as follows:

30 September 2015 thru 29 September 2016

C-1.6 Place of Performance:

C-1.6.1 Compressed Gases: Pick-up of empty cylinders and delivery of compressed gases by cylinder or by bulk to be provided simultaneously as required at multiple locations on Fort Lee, Virginia (to include at the Recovery Range on River Road and on the Ordnance Campus, buildings 18029 -18041).

C-1.6.2 Welding/metalworking supplies: Deliver welding/metalworking supplies to the Metalworking Services Division, Cohen Hall, Building 18033, Room 194,Central Avenue, Fort Lee, Virginia.

C-1.7 Program Manager/Contractor Point of Contact: The Contractor shall provide a single point of contact/ Program Manager (PM), responsible for performance of the contract. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the KO and COR. The PM or alternate shall have full authority to commit resources and make decisions for the Contractor. The PM shall coordinate all aspects of the contract through the COR. The PM shall provide quality control of all deliverables, manage contract costs and provide for mission accomplishment within delineated timeframes.

C-1.8 Quality Assurance: The Contractor shall alert the Contracting Officer (KO) and Contracting Officer’s Representative (COR) of any Government requested changes to this PWS that will impact scope (schedule/cost).

Prior to execution of any changes which impact scope, the contractor shall seek approval from the COR and KO.

The contractor shall not perform any services beyond what is specified in the PWS until a modification to the contract has been executed by the Contracting Officer authorizing the requested changes.

C-1.9 Hours of Operation: The contractor is responsible for conducting business between the hours of 8:00 am to 5:00 pm, Monday through Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings.

C-1.10 Restricted Access to Military Installation: Fort Lee has instituted 100% controlled access policy.

Controlled access means there will be military police or DoD Security Guards located at the entry gates. Vehicles entering the installation may be subject to stop and search procedures. At times of increased security alerts, control may be increased or access may be restricted completely. Some gates may be closed during periods of the day or night.

C-2 Acronyms: Reserved

C-3: GOVERNMENT FURNISHED ITEMS AND SERVICES:

C-3.1 Equipment: The Government will provide contractor personnel access to welding and metalworking equipment, compressed gas cylinders, bulk gas tanks and compressed gas systems located at USA-Ordnance School, Fort Lee, VA. to meet the requirements under this PWS.

C-4: CONTRACTOR FURNISHED ITEMS: Other than access to the government owned equipment identified in C-3.1, the contractor shall furnish everything required to perform the requirements of this contract.

C-5 Specific Tasks

C-5.1 Personnel Qualifications

C-5.1.1 Contractor is to provide factory authorized and trained Service Technicians for equipment maintenance and repair work required on welding equipment or metalworking equipment as requested.

C-5.1.2 Contractor to maintain on staff either an AWS Senior Certified Welding Inspector, an AWS Certified Welding Educator, or an Engineer with a Bachelor in Science in Welding in support of new welding equipment requirements, weld procedures specifications and welding gas applications.

C-5.2 Task Specific Requirements

C-5.2.1 Welding and Metalworking Equipment Maintenance and Repair: The following maintenance/repair work is to be performed when requested on an “As Needed” basis by the activity COR, to include approved preventive maintenance services and/or inspections. Typically, the COR will gather known maintenance requirements and scheduled quarterly preventative maintenance services for the division and schedule with the Vendor to come on-site with a Service Technician for up to 5 consecutive days, 4 times per year. When critical equipment is reported non-mission capable, the COR will initiate emergency service call. Historically there have been no more than X emergency service calls a year. Within 2 business days, the Contractor shall inspect and diagnose equipment identified by a service call (via email or telephonically) to initiate a plan of action, followed by one or more of the following:

• Repair listed equipment on-site

• Repair listed equipment at contractors place of business

• Replace, if non-economically repairable and deemed mission essential by COR

• Provide telephonic response within 24 hours to emergency situations with field expert guidance

• Accomplish required systems inspections, as required by higher authority (OSHA, State, Federal) or for personnel safety (time and materials)

• Provide factory certified technicians for equipment warranty service requirements/repairs and preventive maintenance equipment services to assist in increasing equipment lifecycle longevity (time and materials)

• Transport government supplies and equipment, time charged

• Install new equipment, ancillary equipment and accessories as requested, (time and materials)

• Provide/modify/repair as required, equipment power sources (wiring, plugs, receptacles, conduit, fuses, breakers, disconnects, etc), compressed gas/air lines (piping, valves, regulators, etc), support equipment/structures (time and Materials)

• Provide technical advice and new equipment training as requested

• Service Technicians shall connect primary electrical plugs and receptacles as required.

• Rigging and machine leveling shall be done by the contractor as required.

C-5.2.2 Compressed Gas Cylinder and Gas Systems Maintenance: Dispose of all non-repairable government and contractor provided cylinders. Government owned cylinders, either high pressure, liquid or fuel gas, that are deemed to be beyond economical repair (in excess of 45% of value) are to be replaced with new, if requested by COR. Gas delivery systems and manifolds to properly and safely dispense gases are also included on an as needed basis.

• Perform cylinder maintenance and repair services: Inspect and repair serviceable government owned cylinders. Repairs costs, as required, will be done on a cylinder by cylinder basis, as deemed necessary during requalification inspection or obvious failure. See requirements list for cylinder repair parts.

• Perform bulk tank inspections (as required by state/federal laws) and maintenance and repair services:

Inspect and repair government owned bulk tanks. Repairs costs, as required, will be done on a case by case basis, as deemed necessary during inspection or service repair order.

• Cylinder refurbishment (striping and painting): This item includes all lettering, stenciling, affixing of decals, metal lettering and/or number stamping when required by applicable regulation. The paint used shall meet the requirements of Federal Specification TT-E-489 where permitted or normally used, because of local environmental laws or concerns. The contractor shall ensure the paint used is of the highest quality used in normal commercial practice under the local laws and regulations (see requirements list for cylinder refurbishment specifics).

• Perform mandated requalification and related practices on government owned cylinders as required.

(Technical Exhibit 2–Compressed Gases List).

• Contractor shall provide documentation of yearly safety inspections as required of gas piping and handling systems.

• Any necessary cylinder or gas system services to be furnished under the terms of this contract shall be performed by the contractor on approval from the COR. The contractor shall inspect, maintain, and charge Government-owned cylinders in accordance with MIL-STD-1411 dated August 6, 1976, and Change Notice 1 dated September 8, 1981 “Military Standard Inspection and Maintenance of Compressed Gas Cylinders”.

C-5.2.2.1 Process to Request Maintenance: The Contracting Officer Representative (COR) is the sole point of contact for the contractor. It is generally desired that equipment remain and be repaired at the training department site. If it is determined by the technician that a proper diagnosis or repair cannot be accomplished on site, the COR will provide approval for equipment to leave the training department. The Contractor shall provide a quote, declare equipment is to be fixed under manufacturer warranty prior to starting repairs, or render it as not economically repairable directly to the COR. Repairs considered not economically repairable (repairs that exceed 60% of item replacement cost) shall not be approved (under most circumstances). Upon completion of repairs on or off-site (and upon return delivery), the training instructor will validate function and serviceability of equipment and notify the COR to acknowledge that repairs have been completed. The COR will be immediately contacted on discovery of discrepancies with maintenance work. Any discrepancies between the delivery ticket and the invoice will be brought to the attention of the contractor PM/POC.

C-5.3.1 Compressed Gases Delivery: Contractor shall deliver and pick-up compressed gases (Technical Exhibit 2– Compressed Gases List), to include the pick-up of empty government gas cylinders and delivery of refilled cylinders; delivery of full, and pick up of empty, contractor owned/provided cylinders; delivery of full disposable and pick up of empty disposable cylinders; delivery of requested/purchased new cylinders with gases, (New) cylinders shall be painted and ID tagged “Property of US Government”; deliver of bulk compressed gas (Technical Exhibit 2–Compressed Gases List). There is not a specified delivery schedule as usage is indefinite delivery and indefinite quantity based upon changing training loads. Activity COR serves as sole government POC for the request of pick-up and delivery of gases and will coordinate with the contractor on a weekly basis for gas deliveries and cylinder pick-up.

C-5.3.2 Welding/Metalworking Supplies: Contractor shall provide consumable and durable supplies used to accomplish welding and machining training on an “As- Needed” basis only. Supplies are requested on an “As- Needed” basis when bench stocks levels fall at or below a pre-determined re-order point. The division’s supply technician submits a request thru the Division Chief for approval. Once approved, the Division Chief, serving also as the Contracting Officer Representative (COR) and sole point of contact between the vendor and the end-user, places the supply order with the contractor Point of contact (POC) via phone or email. Required turnaround from order to delivery is not to exceed (NTE) 2 business days. Supplies are to be directly delivered to the training department receiving point (bldg. 18033) and will be received, inventoried and acknowledged by the supply technician. The COR will be immediately contacted by the supply technician/receiver on discovery of any discrepancies. Approved receipt documents, i.e. delivery tickets will be sent to the COR to await contractor billing thru Wide Area Workflow (WAWF) where it will be joined with the invoice. Any discrepancies between the delivery ticket and the invoice will be brought to the attention of the contractor billing POC or dedicated company sales representative for correction.

• Supply requests will be placed and based off of the Welding and Metalworking Supplies List (See Technical Exhibit 3) and shall not exceed the quantities listed.

• Contractor shall honor and coordinate replacement of any failed product purchased that is covered by a manufacturer’s warranty.

• Filler metals are to meet the following specifications with actual, not typical certifications, as needed:

E-7018: AWS A5.1, MIL-E-0022200/10, MIL-7018-M; ER70S6: AWS A5.18, MIL-E-23765/1, MIL-

70S-6, E71T-1;AWS A 5.20, MIL-E-24403/1

C-5.4 Deliverables

Compressed Gases Delivery: IAW paragraph C-5.3.1 of this PWS

Compressed Gas Cylinder, Gas System Maintenance: IAW paragraph C-5.2.2 of this PWS.

Welding/Metalworking Supplies: IAW paragraph C-5.3.2 of this PWS.

Welding/Metalworking Equipment Maintenance and Repair: IAW paragraph C-5.2.1 of this PWS.

Contractor Manpower Report (CMR) The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for Ordnance School via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2015. Contractors may direct questions to the help desk at http://www.ecmra.mil.

C-7. TECHNICAL EXHIBITS

C-7.1 Technical Exhibit 1 – Performance Requirements Summary (PRS)

C-7.2 Technical Exhibit 2 – Compressed Gases List

C-7.3 Technical Exhibit 3 – Welding and Metalworking Supplies List

C-7.4 Technical Exhibit 4 – Metalworking Equipment List

TECHNICAL EXHIBIT 1

Performance Requirements Summary

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance standard briefly describes the minimum acceptable levels of service required for each requirement. These standards are critical to mission success.

Performance

Objective

PWS

Paragraph

Performance

Standard

Minimum

Acceptable

Standard (MAS)

Method of

Surveillance

Maximum

Allowable

Deviation

Remedy

PO #1 Provide qualified service technicians to successfully support all requirements defined in the PWS

C-1.3.4 C-1.3.6

The Contractor will maintain a qualified staff (qualified service technician) for uninterrupted performance of all tasks defined within this PWS without augmentation by Government personnel (military or civilian).

COR performs random surveillance to verify the qualifications of key personnel and specialized personnel defined in the PWS.

No more than one (1defect per month

Reject invoices where repairs are not completed properly or equipment is not functional;

$100 dollars will be deducted from next invoice submitted for more than one defect

PO #2 Receipt of requested gases and metalworking supplies in a timely manner and in the quantities requested

C-1.3.8 Contractor to provide requested supplies/gases as required in the PWS, within the times specified and with a minimum number of complaints.

COR will review 100% of all deliverables (delivery tickets, repair tickets and invoices) and time as stated in C-1.3.8

No more than two

(2) defects

Reject invoices that do not reflect correct items and quantities received; $100 dollars will be deducted from next invoice submitted for more than two defects

PO# 3 Ensure Customer Satisfaction of all services

All Contracted personnel will perform in a professional and businesslike manner, with a minimum number of unresolved complaints

The COR will collect information of satisfaction or complaints from Division Chiefs on PWS performance.

Any complaints will be documented and discussed with Program Manager at time of occurrence or receipt of complaint.

No more than two

(2) valid customer complaints

Report discrepancies with KO; $100 dollars will be deducted from next invoice submitted for more than two complaints

C-7.2 Technical Exhibit 2 – Compressed Gases List

Product UM Container Estimated Annual Quantity

Argon CF Bulk 325000

Oxygen CF Bulk 125000

CO2 LBS Bulk 8600

Acetylene 220CF Cylinder 275 propane 33 lbs Cylinder 20

N-3500 250cf Cylinder 80

N-2200 255cf Cylinder 100

R134 125 lbs Cylinder 4

RT227 100 lbs Cylinder 800

R23 Cyl ea Cylinder 8

R22 125 lbs Cylinder 2

R410 30 lbs Cylinder 2

R407 30 lbs Cylinder 2

R404 30 lbs Cylinder 2

HF 100 lbs Cylinder 8

Acetylene MC10 Cylinder 220

Oxygen 250cf Cylinder 60

C-7.3 Technical Exhibit 3 – Welding and Metalworking Supplies List

Commodity STOCK # DESCRIPTION UI

Estimated

Annual Usage

TOOLS-MACH 4019790 Absorbent Pad, 15" X 19" pg 6

TOOLS-MACH 58617143 Absorbent Roll, 15" X 150' rl 4

PPE-MACH Brown Duluth Apron, Machinist, (Brown Duluth) ea 60

C-MILLING 08454217 Arbor, End Mill, Shell ea 6

B-BENCH OPS MSC 73266249 Blade, Hacksaw, 18-24 TPI ea 100

PPE-ALL MSC 67443614 Bloodborne Pathogens Kit kt 1

PPE-ALL MSC 40046930 Bloodborne Pathogens Kit (Refill) bx 1

B-BENCH OPS MSC 83854596 Blow Molded Case (black) ea 4

B-BENCH OPS FASTENAL Bolt, 3/8-16 Steel ea 400

D-LATHE 8061079 Boring Bar, 3/8 x 4" HSS ea 48

F-OFCW

HARRIS PRODUCTS

GROUP 4535

Brazing Alloy, silver, SAFETY-SILV 45, 1/16", (5 t.o.) ea 12

TOOLS-MACH 75851899 Brush, Sash ea 100

TOOLS-MACH 93410199 Brush, Toothbrush, Synthetic ea 40

TOOLS-WELD BW-112 Brush, Wire, Shoe Handle ea 160

G-GTAW BW-190…