Amendment W912WJ22Q0081-0002.pdf

W13G86204770340001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendment is necessary to revise the Supply Requirement to clarify the specifications of acceptable products.

Closing i is extened until April 7, 2022 at 2:00 PM Eastern.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 30-Mar-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912WJ22Q0081

X 9B. DATED (SEE ITEM 11)

21-Mar-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

30-Mar-2022

CODE

U S ARMY ENGR DISTRICT, NEW ENGLAND

696 VIRGINIA RD

CONCORD MA 01742-2751

W912WJ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912WJ22Q0081

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 01-Apr-2022 02:00 PM to 07-Apr-2022 02:00 PM.

The following have been modified:

SUPPLY REQUIREMENT

FLATBED APPLICATOR WORKTABLE

U.S. ARMY CORPS OF ENGINEERS

NEW ENGLAND DISTRICT SIGN SHOP AT TULLY LAKE

ROYALSTON, MA

Supply Requirement

A. General

1. Scope – Supply, deliver and unload one flatbed applicator worktable. Equipment is to be provided in accordance with the following requirements and schedule.

2. Location – Equipment shall be delivered and unloaded at the New England District Sign Shop, located at 2 Athol-Richmond Road, Royalston, MA 01368. See attached map for location.

3. Project Coordination – Contact the Technical Point of Contact Allen Rudicil, at 978-318-

8201 or allen.j.rudicil@usace.army.mil to coordinate the specific delivery schedule (Date and Time).

4. Schedule – All materials identified in these requirements shall be delivered no later than 90 days from contract award. The project area will be open to the contractor Monday through Friday 7:00 AM to 3:30 PM and all deliveries must be done during those hours unless alternate hours are approved by the Technical Point of Contact.

5. Safety Requirements – All work shall be conducted in accordance with the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, most recent edition), and all applicable Occupational Safety and Health Administration (OSHA), federal, state, and local safety, and health requirements. A copy of EM 385-1-1 can be accessed at the project office or electronically at Headquarters USACE website under publications using the following link:

http://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_3

85-1 1.pdf

NOTE: Project staff reserve the right to cease work at any time should the safety of employees, Contractors, and/or the public become jeopardized.

6. Accident Reporting- All accidents and near misses shall be investigated by the Contractor.

All work-related recordable injuries, illnesses, and property damage accidents (excluding on-the-road vehicle accidents), in which the property damage exceeds $5,000.00, shall be verbally reported to the TPOC within four (4) hours of the incident. Serious accidents as described in EM 385-1-1 Section 01.D shall be immediately reported to the TPOC. ENG Form 3394 shall be completed and submitted to the TPOC within five (5) working days of the incident.

The Contractor shall compile employee work hours (including subcontractors) and forward the total hours to the TPOC no later than close of business on the 10th calendar day of the following month. The method of transmission by the prime contractor to the TPOC shall be electronically.

7. Permits – The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses, permits, and letters of certification. The Contractor shall comply with any applicable Federal, State, County, and Municipal laws, codes, and regulations in connection with the performance of the work specified under this contract.

8. Payment – The contractor will furnish the Technical Point of Contact with one invoice, stating the materials delivered, the date of deliver, the date of acceptance and the amount to be paid. Payment shall be made actual materials delivered at the applicable contract unit price.

All invoices may be mailed to:

U.S. Army Corps of Engineers New England District Sign Shop Tully Lake 2 Athol-Richmond Road Royalston, MA 01368 Or Emailed to allen.j.rudicil@usace.army.mil

B. Equipment Requirements

1. Supply, deliver and unload one (1) Flatbed Applicator Worktable with the following specification:

a. Working area length between 12’ – 15’12’ – 14’

b. Working area width between 5’- 7’ 5’5” – 6’9”

c. Overall floor footprint of the unit no greater than 17’16’L X 8’W

d. Adjustable Working Height

e. LED Illumination

f. Hardened Safety Glass Top

g. Side Holders

h. Pneumatic Roller Clamping Pressure Air Supply with a range between 80-150psi

i. 230V/50Hz (10A) or 120V/60Hz (15A)

j. Self-Healing Cutting Mat

k. Unobstructed Access Roller

l. Tabletop Roll Holder

m. Long Reach Cutter

n. Sticky Roller with Sticky Pads

o. Country of Origin shall be specified in the provided quote.

(End of Summary of Changes)