Solicitation W912WJ20A0005.pdf

25. TOTAL

CODE

17. ACCOUNTING AND APPROPRIATION DAT A/ LOCAL USE

36. I cert ify this account is correct and proper for payment.

6. ISSUED BY CODE

9. CONTRACTOR

CODE

18. ITEM NO. 19. SCHEDULE OF SUPPLIES/ SERVICES

26. QUANTITY IN COLUMN 20 HAS BEEN

SIGNATURE OF AUTHORIZED GOVT. REP.DATE

DAT E SIGNATURE AND TITLE OF CERTIFYING OFFICER

INSPECTED RECEIVED ACCEPTED, AND CONFORMS TO THE

CONTRACT EXCEPT AS NOTED

37. RECEIVED AT 38. RECEIVED BY 39. DATE RECEIVED

(YYYYMMMDD)

W912WJ20A0005

1. CONTRACT/PURCH. ORDER/

AGREEMENT NO.

* If quantity accepted by the Government is same as quantity accepted below quantity ordered and encircle.

DELIVERY/16.

14. SHIP TO

W912WJ

DD Form 1155, JAN 1998 (EG) PREVIOUS EDITION MAY BE USED.

SEE SCHEDULE

2. DELIVERY ORDER/ CALL NO.

68PAGE 1 OF

5. PRIORITY

CODE

8. DELIVERY FOB

DEST

OTHER

(See Schedule if other)

MARK IF BUSINESS IS11.

SMALL

SMALL

DISADVANTAGED

WOMEN-OWNED

964145

MARK ALL

PACKAGES AND

PAPERS WITH

IDENTIFICATIO N

NUMBERS IN

BLO CKS 1 AND 2.

23. AMOUNT

27. SHIP NO. 28. DO VOUCHER NO.

PARTIAL

FINAL

32. PAID BY 33. AMOUNT VERIFIED

CORRECT FOR

31. PAYMENT

COMPLETE

34. CHECK NUMBER

PARTIAL

FINAL 35. BILL OF LADING NO.

40.TOTAL

CONTAINERS

41. S/R ACCOUNT NO. 42. S/R VOUCHER NO.

ORDER FOR SUPPLIES OR SERVICES

3. DATE OF ORDER/CALL

2020 Mar 18

4. REQ./ PURCH. REQUEST NO.

SEE ITEM 6

FACILITY 10. DELIVER TO FOB POINT BY (Date)

SEE SCHEDULE

12. DISCOUNT TERMS

Net 30 Days

13. MAIL INVOICES TO THE ADDRESS IN BLOCK

See Performance Work Statement

15. PAYMENT WILL BE MADE BY CODE

FINANCE AND ACCOUNTING OFFICER

US ARMY CORPS OF ENGRS FINANCE CENTER

5722 INTEGRITY DRIVE

MILLINGTON TN 38054-5005

This delivery order/call is issued on another Govt. agency or in accordance with and subject to terms and conditions of above numbered contract.

TYPE CALL

OF PURCHASE

ORDER

SEE SCHEDULE

X

7. ADMINISTERED BY

U S ARMY ENGR DISTRICT, NEW ENGLAND

696 VIRGINIA RD

CONCORD MA 01742-2751

24. UNITED STATES OF AMERICA

TEL:

EMAIL:

CONTRACTING / ORDERING OFFICER

quantity ordered, indicate by X. If different, enter actual

BY:

1If this box is marked, supplier must sign Acceptance and return the following number of copies:X

NAME OF CONTRACTOR SIGNATURE TYPED NAME AND TITLE

(YYYYMMMDD)

DATE SIGNED

ACCEPTANCE. THE CONTRACTOR HEREBY ACCEPTS THE OFFER REPRESENTED BY THE NUMBERED PURCHASE ORDER AS IT MAY PREVIOUSLY HAVE BEEN OR IS NOW MODIFIED, SUBJECT TO ALL OF THE TERMS

AND CONDITIONS SET FORTH, AND AGREES TO PERFORM THE SAME.

Reference your quote dated

Furnish the following on terms specified herein. REF:

20. QUANTITY

ORDERED/

ACCEPTED*

21. UNIT 22. UNIT PRICE

DIFFERENCES

29.

30.

INITIALS

W912WJ20A0005

Section B - Supplies or Services and Prices

BPA Master Dollar Limit: $250,000.00 BPA Call Limit: $25,000.00

Period of Performance: 18-Mar-2020 to 17-Mar-2023

FSC Codes:

S216

INSTRUCTIONS TO OFFERORS

PLEASE DIRECT QUESTIONS TO JENNIFER M. SAMELA AT (978) 318-8324 OR

JENNIFER.M.SAMELA@USACE.ARMY.MIL. THE SOLICITATION AND RESULTING CONTRACT

SHALL BE THE GOVERNING DOCUMENT IN ALL CASES.

** QUOTES CAN BE E-MAILED TO JENNIFER M. SAMELA AT

JENNIFER.M.SAMELA@USACE.ARMY.MIL.

THE BID SCHEDULE MUST BE COMPLETED AND SUBMITTED FOR A QUOTE TO BE

CONSIDERED COMPLETE.

THE GOVERNMENT INTENDS TO AWARD UP TO THREE (3) BLANKET PURCHASE

AGREEMENTS FROM THIS ONE SOLICITATION.

In accordance with FAR Part 52.204-7(b)(1) Contractors must be registered in the System for Award Management (SAM) database (www.SAM.gov) to submit an offer. (Formerly the Central Contractor Registration (CCR) database and the On-Line Representations and Certifications (ORCA).) Any reference to CCR or ORCA in any clause or provision is referring to the www.sam.gov website. Please note that Google and Google Chrome are not supported browsers for SAM registration. Mozilla FireFox, Safari, and Internet Explorer are supported browsers.

NOTE: SAM.gov registration takes approximately 3 weeks (DUNS registration 1-2 business days; CAGE code validation up to 10 business days; IRS validation and overall submission 7-10 business days). It is the contractor’s responsibility to track SAM.gov registration and follow-up with required tasks.

In addition, if you are registering a new entity in SAM.gov, you must provide an original, signed notarized letter stating that you are the authorized Entity Administrator. The Entity Administrator must establish a LOGIN.GOV account using the e-mail address that will be associated with the SAM registration. See https://www.gsa.gov/about-us/organization/federal-acquisition-service/office-of-systems-management/integrated-award-environment-iae/sam-update for additional information.

Provide DUNS number: ___________________________ (telephone 866-705-5711 for DUNS) Provide CAGE code: ____________________________ Provide TAX ID: __________________________ Per FAR Part 52.212-3 Alt I, the Contractor is required to complete the On-line Representations and Certifications Application (www.SAM.gov) and paragraph (b) if applicable, OR to complete paragraphs (c) thru (m) of this clause and return with quote.

POTENTIAL QUOTERS ARE NOTIFIED THAT THE BASIS ON WHICH AWARD WILL BE MADE IS PRICE

ALONE.

ALL RESPONSIBLE SOURCES MAY SUBMIT A RESPONSE WHICH, IF TIMELY RECEIVED, MUST BE

CONSIDERED BY THE AGENCY.

INVOICES SHALL BE SENT TO TECHNICAL POINT OF CONTACT.

BID SCHEDULE

BLANKET PURCHASE AGREEMENT

U.S. ARMY CORPS OF ENGINEERS

ELEVATOR INSPECTION, MAINTENANCE, REPAIRS & LOAD TESTING

BLACK ROCK LAKE AND COLEBROOK RIVER LAKE

Thomaston and Colebrook, CT

Bid Schedule

DESCRIPTION UNIT

Year 1

PRICE 4

Year 2

PRICE 4

Year 3

PRICE 4

1. Black Rock Lake Annual Elevator Service, Inspection and Maintenance

EA¹

2. Black Rock Lake Elevator Repairs HR³

3. Black Rock Lake Elevator Service Repair Parts, Percentage Markup (Note: Parts not to exceed $5,000 per year) 2

% 2

4. Black Rock Lake Elevator Load Test EA¹ NA NA

5. Travel Time (Black Rock Lake) HR5

6. Colebrook River Lake Annual Elevator Service, Inspection and Maintenance

EA¹

7. Colebrook River Lake Elevator Repairs

HR³

8. Colebrook River Lake Elevator Service Repair Parts, percentage markup (Note: Parts not to exceed $5,000 per year) 2

% 2

9. Colebrook River Lake Elevator Load Test

EA¹

NA NA

10. Travel Time (Colebrook) HR5

NOTES:

1. The Unit Price (EA) includes the Combined Labor Rate for all personnel and the supplies, materials, fuel, and equipment required to support the required work.

2. The Percent (%) Mark-Up is for Contractor-furnished Materials and Supplies Only.

3. The Unit Price (HR) pertains to the cost of one technician per hour and should include administrative oversight costs in the unit bid price.

4. A separate Bid Schedule may be provided for each Project Location or County to accommodate potential differences in pricing.

5. Travel time may not exceed two hours per day for each crew member and may not exceed the travel time from the Contractor’s Office/base of operation to the Project Location.

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

BLANKET PURCHASE AGREEMENT

U.S. ARMY CORPS OF ENGINEERS

ELEVATOR INSPECTION, MAINTENANCE, REPAIRS & LOAD TESTING

BLACK ROCK LAKE AND COLEBROOK RIVER LAKE

Thomaston and Colebrook, CT

A. General

1. Scope - The purpose of this Blanket Purchase Agreement (BPA) is to provide an indefinite quantity of elevator services for two (2) elevators at two different locations.

The Contractor shall furnish all labor, equipment and materials necessary to execute elevator inspections, maintenance, repair and load testing for each BPA Call under this agreement.

No single BPA Call may exceed $25,000 in total cost. The BPA Master Dollar Limit is $250,000. The intent of this blanket BPA is to provide the government with a cost-effective rapid response way to maintain the U.S. Army Corps of Engineers facilities.

In accordance with FAR 13.303-3(a)(2), the Government is obligated only to the extent of authorized purchases actually made under the BPA.

The Government intends to award multiple (up to three) Blanket Purchase Agreements for this work.

2. Locations - The required services shall be performed at the U.S. Army Corps of Engineers

(USACE) Black Rock Lake Dam Control Tower and Colebrook River Lake Dam Control Tower.

a. Black Rock Lake Project Office is located at 350 Old Branch Road, Thomaston, CT 06787. The tower is located nearby on Rt. 109, approximately one mile north of the project office.

b. Colebrook River Lake Project Office (and Control Tower) is located at, 426A Colebrook River Road (Rt. 8) Colebrook, CT 06021. The tower is located approximately one mile from the office, along the main project access road.

3. Site Visits - Contact the Technical Point of Contact to arrange a site visit.

a. Colebrook River Lake contact Project Manager John Haluchak at 978-

318-8439 or john.a.haluchak@usace.army.mil.

b. Black Rock Lake contact Project Manager Steven Patchkofsky at 978-318- 8369 or steven.d.patchkofsky@usace.army.mil .

4. Schedule –

The BPA shall have a 36-month period of performance from the date of award.

The Contractor shall provide a quote for each BPA Call request within 14 days of the initial contact by the Technical Point of Contact. The Contractor may receive additional time to provide the quote if it is pre-approved by the Technical Point of Contact.

Upon receipt of an executed BPA Call from the Government, the Contractor shall coordinate the start of the work no later than 14 calendar days after notification.

5. Permits - The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses, permits, and letters of certification. The Contractor shall comply with any applicable Federal, State, County, and Municipal laws, codes, and regulations in connection with the performance of the work specified under this contract.

6. Security - The contractor will comply with all established security policies at the Black Rock

Lake & Colebrook River Lake projects. Due to periods of heightened security that may affect the access to the areas covered under this contract, the Government reserves the right to close any property or portion of property and reschedule and/or cancel any subsequent service.

The Contractor shall be given at least 24 hour notice of any such closure.

7. Contractor Conduct - Alcohol, illegal substances and firearms are prohibited on project grounds. Contractor and employees must comply with CFR 36 Rules and Regulations.

8. Payment - Payment shall be made on a per job basis. After final inspection and acceptance by the Government, the Contractor must submit an invoice to the appropriate Technical Point of Contact. The invoice shall include the invoice date, contract number, dates of service, description of work, quantities, and total amount due per line item.

Invoices for the respective facilities may be mailed to:

U.S. Army Corps of Engineers Colebrook River Lake Project Office P.O. Box 58 Riverton, CT 06065 Or emailed to john.a.haluchak@usace.army.mil

U.S. Army Corps of Engineers Black Rock Lake Project Office 350 Old Branch Road

Thomaston, CT 06787 Or emailed to steven.d.patchkofsky@usace.army.mil

9. Safety Requirements-

a. General:

All work shall be conducted in accordance with the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, most recent edition), and all applicable OSHA, federal, state, and local safety and health requirements. A copy of EM 385-1-1 can be accessed at the project office or electronically at the following link:

http://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_385-1- 1.pdf

Project staff reserve the right to cease work at any time should the safety of employees, Contractors, and/or the public become jeopardized.

b. Accident Prevention Plan:

The Contractor shall prepare an Accident Prevention Plan (APP) specific to the activities being performed. It shall include Activity Hazard Analyses (AHAs) as described below in paragraph C.

A non-mandatory, fillable APP template is available upon request. However, the contractor is permitted to submit their own plan, at a minimum it must meet the requirements of EM 385-1-1, Appendix A.

A preparatory meeting shall be conducted by the prime contractor to discuss the APP contents with all effected onsite employees. The Prime Contractor is responsible for informing the subcontractors of the safety provisions under the terms of the contract, the penalties for noncompliance, and inspecting subcontractor operations to ensure that accident prevention responsibilities are being carried out.

Weekly safety meetings shall be held and documented. Records shall be available to the TPOC upon request.

c. Activity Hazard Analysis:

An AHA shall be submitted for each major phase of work. A major phase of work is defined as an operation involving a type of work presenting hazards not experienced in previous operations or where a new subcontractor or work crew is to perform the work. The analysis shall define all activities to be performed, identify the sequence of work, the specific hazards anticipated, and the control measures to be implemented to eliminate or reduce each hazard to an acceptable level. The AHA shall be continuously reviewed and revised to address changing site conditions as appropriate.

d. Emergency Response:

Emergency procedures shall be documented in the Abbreviated Accident Prevention Plan and will include a map with directions to the nearest hospital, emergency contact numbers, and onsite First Aid/CPR responders.

e. Required Personnel:

The Contractor shall employ a minimum of one Competent Person (CP) at each project site to function as the Site Safety and Health Officer (SSHO). The SSHO shall be present at the project site and report to the contractor’s upper management. The SSHO is required to have related construction experience and have at a minimum completed a 10 Hour OSHA training.

In addition, when emergency medical services are not accessible within 5 minutes of the work location and there are 2 or more workers onsite, at least 2 employees shall have (in-person) training in First Aid and CPR. Minimum qualifications are listed in EM 385-1-1, Section 03.A.02.c.

*Note: Other Competent or Qualified Persons may be required per EM 385-1-1 and/or other sections of this Scope of Work, based on the characteristics of the project*

f. Accident Reporting:

All accidents and near misses shall be investigated by the Contractor. All work-related recordable injuries, illnesses and property damage accidents (excluding on-the-road vehicle accidents), in which the property damage exceeds $5,000.00, shall be verbally reported to the TPOC within four (4) hours of the incident. Serious accidents as described in EM 385-1-1 Section 01.D shall be immediately reported to the TPOC. ENG Form 3394 shall be completed and submitted to the TPOC within five (5) working days of the incident.

The Contractor shall compile employee work hours (including subcontractors) and forward the total hours to the TPOC no later than close of business on the 10th calendar day of the following month. The method of transmission by the prime contractor to the TPOC shall be electronically.

g. Fall Protection:

a. General: The requirements of this section are applicable to contractors when their employees are working at heights above 6 feet, exposed to fall hazards, and/or using fall protection equipment. Every Contractor is responsible for establishing, implementing and managing a fall protection program in accordance with EM 385- 1-1, Section 21.

b. Submittals: A site-specific Fall Protection and Prevention Plan is required to be submitted and approved by the GDA prior to any work being completed at heights.

USACE can provide a non-mandatory, fillable template plan. However, the contractor is permitted to submit their own plan, at a minimum it must address the items listed in EM 385-1-1, Section 21.D.01:

i. Duties and responsibilities. Identify CPs and QPs and their responsibilities and qualifications;

ii. Description of the project or task performed;

iii. Training requirements to include safe use of fall protection equipment;

iv. Anticipated hazards and fall hazard prevention and control;

v. Location of anticipated anchorages that will be installed during the project;

vi. Rescue plan and procedures;

vii. Design of anchorages/fall arrest and horizontal lifeline systems:

viii. Inspection, maintenance and storage of fall protection equipment;

ix. Incident investigation procedures;

x. Evaluation of program effectiveness;

xi. Inspection and oversight methods employed.

c. A Competent Person (CP) shall be onsite at all times while work at heights is being performed. The CP must be designated in writing and be trained in accordance with EM 385-1-1, Section 21.C.04. This includes a minimum of 24 hour CP in fall protection training made up of classroom and practical hands-on components.

NOTE: CPs may only approve non-certified anchorages that are capable of holding 5000 lbs. All other anchorages and horizontal lifelines must be certified by a QP or engineer with related experience.

d. Personal Fall Arrest System Requirements (PFAS): All PFAS shall meet the requirements contained in ANSI Z359, Fall Protection Code, to include fall restrain and positioning systems. A PFAS consist of a full body harness, connecting means, and an anchorage system.

B. Technical Requirements:

General Requirements:

1. Summary - Furnish all labor, materials and equipment to perform elevator inspection, maintenance, repair, and load testing on two (2) elevators.

All work performed must be OSHA, ASME 17.1, and EM 385-1-1 compliant.

2. Requests for Information:

Requests concerning the work for each individual BPA call should be directed to the Technical Point of Contact for the specific project location.

3. Existing Conditions (Note: Both elevators are currently in service).

a. Black Rock Lake

i. One elevator located in the dam tower, Black Rock Lake

ii. Manufactured by FS Payne Co - Serial #S516

iii. Put into service in 1970

iv. 3 levels (main floor (operators level), middle and gate chamber

v. Type: Passenger

vi. Motor Type: Geared Overhead Traction, 208 volts/3-phase/60

Hz, 1200 lbs. capacity. Speed: 100 F.P.M.

b. Colebrook River Lake

i. One elevator located in the dam tower, Colebrook River Lake

ii. Manufactured by Otis Elevator - Serial # 227884BP.

iii. 3 levels (main floor (EL. 790), middle (EL. 778) and gate chamber (EL

627).

iv. Type: Passenger

v. Motor Type: Geared Overhead Traction, 208 volts/3-phase/60 Hz, 1200 lbs. capacity. Speed: 100 F.P.M.

4. Clean Up and Waste Disposal - The contractor shall keep the work area free from accumulation of waste materials. Any and all disturbed areas resulting from contractor activities shall be restored by the contractor to the satisfaction of the Technical Point of Contact.

5. Environmental Protection - Contractor will take necessary steps to ensure all federal, state, and local environmental regulatory requirements are met.

6. Government Resources - The contractor may use the existing restroom facilities at the Black Rock Lake or Colebrook River Lake Offices. The government will supply any electricity necessary for the project work from points of existing outlets. There is no water service at the dam towers, however, the government will supply any water necessary for the project work from points available at the respective project offices.

The contractor shall carefully conserve the use of electricity and water provided. The contractor shall supply his own means of communication (telephone).

7. Omissions - This contract may not cover all specified activities, steps, and procedures required to supply the contract product. In case of omission, the normal industry, state, or federal standards, practices, specifications, and/or guides shall prevail. In no instance shall an omission be reason to produce less than an acceptable product.

8. Quality Assurance - The contractor is responsible for the quality control of the contract work. The government has the right to inspect and test all items called for by the contract, to the extent practicable at all times and at all places during the term of the contract.

9. Receiving and Storing Materials - The Corps of Engineers will provide a storage area and parking for contractor personnel. The contractor is responsible for protecting any stored material until it is placed in service. The contractor is responsible for receiving and unloading of delivered goods. Government employees will not receive material for supplies for the contractor and will not be responsible for damage to the contractor’s equipment or materials.

10. Requests for information - Requests concerning the work of this project should be directed to the appropriate Technical Point of Contact at the specific facility.

11. Submittals - Although the Government technically reviews submissions required by this scope of work, it is emphasized that the Contractor’s work must be prosecuted using proper internal controls and review procedures. The documents identified below must be prepared in accordance with the applicable standards, submitted for review and accepted by the Government prior to the commencement of any field activities.

Copy of contractor’s Accident Prevention Plan (APP) Copy of contractor’s Activity Hazard Analysis (AHA) Copy of 24 hr. Competent Person Fall Protection Training Cert. (both hands on and classroom) Copy of 10 hr. OSHA Construction Safety Training Cert.

Copies of all products Safety Data Sheets (SDS) Fall Protection Plan (Prior to the Start of Field Work) Inspection Report – Provided at the completion of the field work and prior to payment.

Service Requirements:

1. General

a. Equipment - It is the contractor’s responsibility to furnish and supply their personnel with the proper safety harnesses and clamps in the performance of inspection and maintenance.

b. Workmanship - The contractor shall establish and maintain a quality control system to assure compliance with the contract requirements.

2. Annual Elevator Service, Inspection and Maintenance– Dam Tower Elevators The contractor shall follow ASME A17.1 elevator code and the manufactures recommendation. The Contractor shall coordinate the inspection date with the Technical Point of Contact to satisfy the applicable regulations.

a. Inspect, Adjust, Calibrate & Lubricate: The Contractor shall Inspect, Adjust, Calibrate and Lubricate each elevator as appropriate, including the following:

1. Car enclosure vision panels (clean)

2. Car doors, trap doors, interlocks, door Gibes

3. Car lights, Emergency Light, Alarms, phone

4. Retiring Cam, Door Operator, Actuator.

5. Car operating station, emergency stop button

6. Main voltage AC. Control voltage AC. Battery voltage DC, charger voltage DC

7. Electrical components for loose connections.

8. Auto-reference. Gear box for leaks and oil level.

9. Lift motor brake

10. Electric motor

11. Worm gear wear, clean filter, play between coupling shafts.

12. Rack and Pinion wear

13. Machine plate attachment

14. Centrifugal brake

15. Safety hooks, guide rollers and counter rollers

16. Mast alignment, mast bolts, rack screws, tie-ins

17. Trailing power, control cables

18. Enclosure and sill run by.

19. Landing door interlocks

20. Normal travel limits, final limit

21. Travel limits cams and flags

22. Operation of hall call station, lights.

23. Pit stop switch

24. Buffer springs

25. Car mounting dampers and bolts

26. Cable trolley assembly

27. Lubrication rack, rollers, doors, interlock, safety devices.

28. Testing safety devices as recommended by manufacturer.

29. Drop Test (completed during each annual inspection)

b. Load Test – The Contractor shall perform a 5 Year Full Load Test (due during year 1) in compliance with the State of Connecticut and ASME 17.1. The load test should include a brake test with the elevator at the maximum rated load and speed.

c. Repairs - The Contractor shall include qualified technicians to perform repairs found during the normal inspection period. Any parts or supplies required during the needed repairs shall be itemized (including mark-up) on the appropriate invoice. NOTE: The total dollar amount of parts and supplies for may not exceed $5,000 per project, per year.

d. Inspection Certificate - The Contractor shall provide a signed certificate rendering the elevators in a safe operating condition by a qualified Technician.

e. Reports - The contractor shall prepare a written report listing all non-conformances with the identified requirements. The contractor shall submit separate reports for each elevator. The reports shall include, at a minimum, the following:

Date when service was performed Itemize noted problems on elevators, prioritized safety concerns, and repair costs.

Indicate the existing condition of each elevator inspected.

f. Travel Time - The Contractor may include travel time for each crew member for each day that the personnel are on site executing the BPA Call requirements. The travel time charge may not exceed two (2) hours per day and may not exceed the travel time from the Contractor’s Office/base of operation to the Project Location (Round Trip) included in the BPA Call.

ATTACHMENTS

PLEASE REFER TO THE ATTACHMENTS INCLUDED AT THE END OF THIS SOLICITATION FOR

ADDITIONAL INFORMATION.

Section H - Special Contract Requirements

WAGE DETERMINATIONS

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4121 Daniel W. Simms Division of | Revision No.: 12 Director Wage Determinations| Date Of Last Revision: 12/23/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

This wage determination is applicable to the following cities and towns in

CONNECTICUT:

HARTFORD COUNTY: Berlin Bristol Burlington Hartland New Britain Plainville Southington

LITCHFIELD COUNTY: Barkhamsted Harwinton Plymouth Thomaston

MIDDLESEX COUNTY: East Haddam Haddam Middletown

TOLLAND COUNTY: Mansfield Union

WINDHAM COUNTY: Ashford Chaplin Scotland Windham

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 17.69 01012 - Accounting Clerk II 19.86 01013 - Accounting Clerk III 22.22 01020 - Administrative Assistant 32.79 01035 - Court Reporter 23.80 01041 - Customer Service Representative I 15.64 01042 - Customer Service Representative II 17.58 01043 - Customer Service Representative III 19.19 01051 - Data Entry Operator I 16.82 01052 - Data Entry Operator II 18.35 01060 - Dispatcher Motor Vehicle 21.44 01070 - Document Preparation Clerk 19.90 01090 - Duplicating Machine Operator 19.90 01111 - General Clerk I 14.90 01112 - General Clerk II 16.26 01113 - General Clerk III 18.26 01120 - Housing Referral Assistant 22.44 01141 - Messenger Courier 14.44 01191 - Order Clerk I 18.46 01192 - Order Clerk II 20.54 01261 - Personnel Assistant (Employment) I 18.39 01262 - Personnel Assistant (Employment) II 20.58 01263 - Personnel Assistant (Employment) III 22.93 01270 - Production Control Clerk 22.72 01290 - Rental Clerk 15.52 01300 - Scheduler Maintenance 18.00 01311 - Secretary I 18.00 01312 - Secretary II 20.14 01313 - Secretary III 22.44 01320 - Service Order Dispatcher 19.27 01410 - Supply Technician 32.79 01420 - Survey Worker 19.42 01460 - Switchboard Operator/Receptionist 16.79 01531 - Travel Clerk I 16.02 01532 - Travel Clerk II 17.46

01533 - Travel Clerk III 18.94 01611 - Word Processor I 15.17 01612 - Word Processor II 17.03 01613 - Word Processor III 19.05 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 23.15 05010 - Automotive Electrician 22.65 05040 - Automotive Glass Installer 21.90 05070 - Automotive Worker 21.90 05110 - Mobile Equipment Servicer 20.56 05130 - Motor Equipment Metal Mechanic 23.41 05160 - Motor Equipment Metal Worker 21.90 05190 - Motor Vehicle Mechanic 23.41 05220 - Motor Vehicle Mechanic Helper 19.81 05250 - Motor Vehicle Upholstery Worker 21.27 05280 - Motor Vehicle Wrecker 21.90 05310 - Painter Automotive 22.59 05340 - Radiator Repair Specialist 21.71 05370 - Tire Repairer 15.94 05400 - Transmission Repair Specialist 23.41 07000 - Food Preparation And Service Occupations 07010 - Baker 13.98 07041 - Cook I 18.88 07042 - Cook II 20.42 07070 - Dishwasher 11.44 07130 - Food Service Worker 12.15 07210 - Meat Cutter 20.95 07260 - Waiter/Waitress 11.15 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 22.22 09040 - Furniture Handler 18.11 09080 - Furniture Refinisher 23.86 09090 - Furniture Refinisher Helper 19.99 09110 - Furniture Repairer Minor 21.98 09130 - Upholsterer 22.22 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 13.18 11060 - Elevator Operator 15.75 11090 - Gardener 18.72 11122 - Housekeeping Aide 15.75 11150 - Janitor 15.75 11210 - Laborer Grounds Maintenance 15.94 11240 - Maid or Houseman 12.68 11260 - Pruner 14.71 11270 - Tractor Operator 17.90 11330 - Trail Maintenance Worker 15.94 11360 - Window Cleaner 17.26

12000 - Health Occupations 12010 - Ambulance Driver 22.93 12011 - Breath Alcohol Technician 22.93 12012 - Certified Occupational Therapist Assistant 31.52 12015 - Certified Physical Therapist Assistant 34.19 12020 - Dental Assistant 21.05 12025 - Dental Hygienist 42.28 12030 - EKG Technician 35.47 12035 - Electroneurodiagnostic Technologist 35.47 12040 - Emergency Medical Technician 22.93 12071 - Licensed Practical Nurse I 22.04 12072 - Licensed Practical Nurse II 24.66 12073 - Licensed Practical Nurse III 27.50 12100 - Medical Assistant 17.84 12130 - Medical Laboratory Technician 27.53 12160 - Medical Record Clerk 22.80 12190 - Medical Record Technician 25.51 12195 - Medical Transcriptionist 20.42 12210 - Nuclear Medicine Technologist 40.91 12221 - Nursing Assistant I 12.30 12222 - Nursing Assistant II 14.36 12223 - Nursing Assistant III 15.67 12224 - Nursing Assistant IV 16.78 12235 - Optical Dispenser 25.00 12236 - Optical Technician 21.82 12250 - Pharmacy Technician 16.18 12280 - Phlebotomist 18.44 12305 - Radiologic Technologist 31.46 12311 - Registered Nurse I 27.91 12312 - Registered Nurse II 34.14 12313 - Registered Nurse II Specialist 34.14 12314 - Registered Nurse III 41.30 12315 - Registered Nurse III Anesthetist 41.30 12316 - Registered Nurse IV 49.50 12317 - Scheduler (Drug and Alcohol Testing) 28.40 12320 - Substance Abuse Treatment Counselor 24.29 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 24.66 13012 - Exhibits Specialist II 30.54 13013 - Exhibits Specialist III 37.36 13041 - Illustrator I 25.30 13042 - Illustrator II 31.34 13043 - Illustrator III 38.33 13047 - Librarian 34.71 13050 - Library Aide/Clerk 15.77 13054 - Library Information Technology Systems 31.34 Administrator

13058 - Library Technician 24.13 13061 - Media Specialist I 22.61 13062 - Media Specialist II 25.30 13063 - Media Specialist III 28.21 13071 - Photographer I 18.79 13072 - Photographer II 21.93 13073 - Photographer III 27.17 13074 - Photographer IV 33.24 13075 - Photographer V 40.21 13090 - Technical Order Library Clerk 19.81 13110 - Video Teleconference Technician 22.36 14000 - Information Technology Occupations 14041 - Computer Operator I 18.31 14042 - Computer Operator II 20.49 14043 - Computer Operator III 22.85 14044 - Computer Operator IV 25.38 14045 - Computer Operator V 28.11 14071 - Computer Programmer I (see 1) 26.39 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.31 14160 - Personal Computer Support Technician 26.63 14170 - System Support Specialist 39.33 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 31.17 15020 - Aircrew Training Devices Instructor (Rated) 37.71 15030 - Air Crew Training Devices Instructor (Pilot) 45.21 15050 - Computer Based Training Specialist / Instructor 31.17 15060 - Educational Technologist 45.83 15070 - Flight Instructor (Pilot) 45.21 15080 - Graphic Artist 26.09 15085 - Maintenance Test Pilot Fixed Jet/Prop 45.21 15086 - Maintenance Test Pilot Rotary Wing 45.21 15088 - Non-Maintenance Test/Co-Pilot 45.21 15090 - Technical Instructor 28.80 15095 - Technical Instructor/Course Developer 35.23 15110 - Test Proctor 23.25 15120 - Tutor 23.25 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 11.51 16030 - Counter Attendant 11.51 16040 - Dry Cleaner 13.34 16070 - Finisher Flatwork Machine 11.51

16090 - Presser Hand 11.51 16110 - Presser Machine Drycleaning 11.51 16130 - Presser Machine Shirts 11.51 16160 - Presser Machine Wearing Apparel Laundry 11.51 16190 - Sewing Machine Operator 14.19 16220 - Tailor 15.17 16250 - Washer Machine 12.11 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 25.68 19040 - Tool And Die Maker 29.50 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.16 21030 - Material Coordinator 22.72 21040 - Material Expediter 22.72 21050 - Material Handling Laborer 15.84 21071 - Order Filler 14.33 21080 - Production Line Worker (Food Processing) 20.16 21110 - Shipping Packer 17.12 21130 - Shipping/Receiving Clerk 17.12 21140 - Store Worker I 15.03 21150 - Stock Clerk 19.49 21210 - Tools And Parts Attendant 20.16 21410 - Warehouse Specialist 20.16 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 34.52 23019 - Aircraft Logs and Records Technician 29.83 23021 - Aircraft Mechanic I 33.37 23022 - Aircraft Mechanic II 34.52 23023 - Aircraft Mechanic III 35.76 23040 - Aircraft Mechanic Helper 27.34 23050 - Aircraft Painter 32.18 23060 - Aircraft Servicer 29.83 23070 - Aircraft Survival Flight Equipment Technician 32.18 23080 - Aircraft Worker 30.94 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 30.94 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 33.37

II

23110 - Appliance Mechanic 22.77 23120 - Bicycle Repairer 19.49 23125 - Cable Splicer 43.35 23130 - Carpenter Maintenance 26.52 23140 - Carpet Layer 28.27 23160 - Electrician Maintenance 27.31 23181 - Electronics Technician Maintenance I 29.88 23182 - Electronics Technician Maintenance II 31.17 23183 - Electronics Technician Maintenance III 32.46

23260 - Fabric Worker 27.26 23290 - Fire Alarm System Mechanic 26.35 23310 - Fire Extinguisher Repairer 26.13 23311 - Fuel Distribution System Mechanic 34.53 23312 - Fuel Distribution System Operator 30.77 23370 - General Maintenance Worker 21.95 23380 - Ground Support Equipment Mechanic 33.37 23381 - Ground Support Equipment Servicer 29.83 23382 - Ground Support Equipment Worker 30.94 23391 - Gunsmith I 26.13 23392 - Gunsmith II 28.27 23393 - Gunsmith III 30.49 23410 - Heating Ventilation And Air-Conditioning 29.72 Mechanic 23411 - Heating Ventilation And Air Contidioning 30.74 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 27.28 23440 - Heavy Equipment Operator 34.80 23460 - Instrument Mechanic 30.07 23465 - Laboratory/Shelter Mechanic 29.42 23470 - Laborer 14.34 23510 - Locksmith 28.80 23530 - Machinery Maintenance Mechanic 27.60 23550 - Machinist Maintenance 24.94 23580 - Maintenance Trades Helper 19.38 23591 - Metrology Technician I 30.07 23592 - Metrology Technician II 31.13 23593 - Metrology Technician III 32.41 23640 - Millwright 30.08 23710 - Office Appliance Repairer 22.93 23760 - Painter Maintenance 23.07 23790 - Pipefitter Maintenance 31.63 23810 - Plumber Maintenance 30.52 23820 - Pneudraulic Systems Mechanic 30.49 23850 - Rigger 25.66 23870 - Scale Mechanic 28.27 23890 - Sheet-Metal Worker Maintenance 31.87 23910 - Small Engine Mechanic 23.89 23931 - Telecommunications Mechanic I 29.14 23932 - Telecommunications Mechanic II 30.15 23950 - Telephone Lineman 30.24 23960 - Welder Combination Maintenance 25.01 23965 - Well Driller 30.49 23970 - Woodcraft Worker 30.49 23980 - Woodworker 26.13 24000 - Personal Needs Occupations 24550 - Case Manager 19.38

24570 - Child Care Attendant 13.75 24580 - Child Care Center Clerk 17.44 24610 - Chore Aide 12.75 24620 - Family Readiness And Support Services 19.38 Coordinator 24630 - Homemaker 22.09 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 29.56 25040 - Sewage Plant Operator 32.98 25070 - Stationary Engineer 29.56 25190 - Ventilation Equipment Tender 24.21 25210 - Water Treatment Plant Operator 32.98 27000 - Protective Service Occupations 27004 - Alarm Monitor 27.73 27007 - Baggage Inspector 15.98 27008 - Corrections Officer 31.96 27010 - Court Security Officer 31.96 27030 - Detection Dog Handler 19.88 27040 - Detention Officer 31.96 27070 - Firefighter 31.96 27101 - Guard I 15.98 27102 - Guard II 19.88 27131 - Police Officer I 31.35 27132 - Police Officer II 34.83 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.91 28042 - Carnival Equipment Repairer 14.55 28043 - Carnival Worker 11.30 28210 - Gate Attendant/Gate Tender 16.23 28310 - Lifeguard 12.47 28350 - Park Attendant (Aide) 18.15 28510 - Recreation Aide/Health Facility Attendant 13.24 28515 - Recreation Specialist 22.48 28630 - Sports Official 14.45 28690 - Swimming Pool Operator 17.71 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 31.93 29020 - Hatch Tender 31.93 29030 - Line Handler 31.93 29041 - Stevedore I 30.79 29042 - Stevedore II 33.28 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 38.78 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 26.74 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45 30021 - Archeological Technician I 22.10 30022 - Archeological Technician II 24.73

30023 - Archeological Technician III 30.63 30030 - Cartographic Technician 30.63 30040 - Civil Engineering Technician 33.15 30051 - Cryogenic Technician I 33.93 30052 - Cryogenic Technician II 37.47 30061 - Drafter/CAD Operator I 22.10 30062 - Drafter/CAD Operator II 24.73 30063 - Drafter/CAD Operator III 27.56 30064 - Drafter/CAD Operator IV 33.93 30081 - Engineering Technician I 16.86 30082 - Engineering Technician II 18.91 30083 - Engineering Technician III 21.96 30084 - Engineering Technician IV 25.74 30085 - Engineering Technician V 30.54 30086 - Engineering Technician VI 36.92 30090 - Environmental Technician 24.81 30095 - Evidence Control Specialist 30.63 30210 - Laboratory Technician 23.67 30221 - Latent Fingerprint Technician I 33.93 30222 - Latent Fingerprint Technician II 37.47 30240 - Mathematical Technician 30.63 30361 - Paralegal/Legal Assistant I 19.36 30362 - Paralegal/Legal Assistant II 23.99 30363 - Paralegal/Legal Assistant III 29.35 30364 - Paralegal/Legal Assistant IV 35.50 30375 - Petroleum Supply Specialist 37.47 30390 - Photo-Optics Technician 30.63 30395 - Radiation Control Technician 37.47 30461 - Technical Writer I 26.40 30462 - Technical Writer II 32.30 30463 - Technical Writer III 39.07 30491 - Unexploded Ordnance (UXO) Technician I 24.65 30492 - Unexploded Ordnance (UXO) Technician II 29.82 30493 - Unexploded Ordnance (UXO) Technician III 35.74 30494 - Unexploded (UXO) Safety Escort 24.65 30495 - Unexploded (UXO) Sweep Personnel 24.65 30501 - Weather Forecaster I 33.93 30502 - Weather Forecaster II 41.26 30620 - Weather Observer Combined Upper Air Or (see 2) 27.56 Surface Programs 30621 - Weather Observer Senior (see 2) 30.63 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.82 31020 - Bus Aide 18.14 31030 - Bus Driver 22.64 31043 - Driver Courier 16.00 31260 - Parking and Lot Attendant 11.77

31290 - Shuttle Bus Driver 16.73 31310 - Taxi Driver 14.53 31361 - Truckdriver Light 16.73 31362 - Truckdriver Medium 19.84 31363 - Truckdriver Heavy 24.30 31364 - Truckdriver Tractor-Trailer 24.30 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.54 99030 - Cashier 11.45 99050 - Desk Clerk 13.41 99095 - Embalmer 32.85 99130 - Flight Follower 24.65 99251 - Laboratory Animal Caretaker I 14.48 99252 - Laboratory Animal Caretaker II 15.14 99260 - Marketing Analyst 33.45 99310 - Mortician 32.85 99410 - Pest Controller 19.84 99510 - Photofinishing Worker 19.38 99710 - Recycling Laborer 23.40 99711 - Recycling Specialist 26.28 99730 - Refuse Collector 21.35 99810 - Sales Clerk 13.39 99820 - School Crossing Guard 17.77 99830 - Survey Party Chief 38.50 99831 - Surveying Aide 24.10 99832 - Surveying Technician 29.15 99840 - Vending Machine Attendant 20.47 99841 - Vending Machine Repairer 23.17 99842 - Vending Machine Repairer Helper 20.47

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years 4 weeks after 15 years and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE…