SolicitationW912PP-16-T-0062-0001.pdf

SEE ADDENDUM

(No Collect Calls)

W912PP-16-T-0062 26-May-2016

b. TELEPHONE NUMBER

575-556-9940

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 13 Jun 2016

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912PP9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

STEPHANIE N PARRA

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

WOMEN-OWNED SMALL

BUSINESS (WOSB)

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

US ARMY ENGINEER DISTRICT, ALBUQUERQUE

4101 JEFFERSON PLAZA NE

ALBUQUERQUE NM 87109-3435

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 967500 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

SANTA ROSA DAM & LAKE PROJECT

PO BOX 345

SANTA ROSA NM 88435

TEL: FAX:

505-342-3496FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

$7.5 Million

NAICS:

561730

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF73

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912PP-16-T-0062

Section SF 1449 - CONTINUATION SHEET

SUBMISSION INSTRUCTIONS

Please submit offers to Stephanie Parra via e-mail at stephanie.n.parra@usace.army.mil or fax at

(505) 342-3496.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Santa Rosa Dam Vegetation Removal

FFP

Contractor shall furnish all labor, management, equipment, supplies, and materials needed for the subject project, in strict accordance with the attached Performance Work Statement and US Department of Labor Wage Determination. Price includes all applicable Federal, State, and Local taxes. Point of contact for this project is Daniel Wolf, 505-342-3318.

FOB: Destination

NET AMT

SAM

****************Note to Offeror**************** The System for Award Management (SAM) registration (formerly CCR) should be completed prior to award of any resultant contract from the RFQ. Failure to have this registration completed could cause delay of award or rejection of offer. To complete or update a SAM registration, go to www.sam.gov.

Please provide the following information with quote:

Dun & Bradstreet Number: ______________________ Federal Tax ID Number: ______________________

CAGE Code: ______________________

PWS

PERFORMANCE WORK STATEMENT (PWS)

Santa Rosa Dam

Dam Face and Groin Vegetation Removal and Treatment

PART 1

GENERAL INFORMATION

1.0 General: This is a non-personal services contract to provide vegetation removal and herbicide treatment/application trees, shrubs and grasses for the Santa Rosa Dam, The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform vegetation removal and herbicide treatment for the Santa Rosa Dam as defined in this Performance Work Statement except for those items specified as Government furnished property and services. The Contractor shall perform to the standards in this contract.

1.2 Background: The face and groins of the dam contain woody vegetation consisting primarily of mesquite on the downstream side of the Santa Rosa Dam. Other dominant plant species consist of rubber rabbitbrush (Chrysothamnus nauseosus), tree cholla (Cylindropuntia imbricata), pricklypear cactus (Opuntia spp.) and various grasses. Shrubs and/or cactus may exist as well.

1.3 Objectives: Per Engineering Technical Letter (ETL) 1110-2-571, the entire dam embankment surface, including the groins and the upstream and downstream areas within 50 feet of the embankment toe, and within 15 feet of the groin, shall be a vegetation-free zone as defined in Chapter 3 “Treatment of Levees, Floodwalls, Embankment Dams, and Appurtenant Structures”, Section 3-4 “Embankment Dams and Appurtenant Structures” and geographically identified in the attached map. The objective of this requirement is to remove the necessary vegetation to maintain compliance with Engineering Technical Letter (ETL) 1110-2-571.

1.4 Scope: Services include cutting of invasive trees using a chainsaw and chipper, and herbicide application. The Contractor shall remove all vegetation from the dam, cutting woody vegetation, and by applying herbicide on all woody vegetation with a trunk diameter of greater than approximately two (2) inches. Specific tasks are described in Part 5 of this PWS.

1.5 Period of Performance: The period of performance shall be 90 calendar days from receipt of award.

1.6 General Information:

1.6.1 Quality Control The Contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure services are performed in accordance with this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor’s QCP is the means by which he assures himself that his work complies with the requirement of the contract.

1.6.2 Quality Assurance: The Government may evaluate the Contractor’s performance under this contract in accordance with a Quality Assurance Surveillance Plan (QASP), if determined necessary. This plan would be primarily focused on what the Government must do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards would be applied, the frequency of surveillance, and the minimum satisfactory performance thresholds, as mutually agreed upon.

1.6.3 Recognized Holidays: The Contractor is not required to perform services on the following recognized holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day

Independence Day Christmas Day

1.6.4 Hours of Operation: The Contractor is responsible for conducting business between the hours of 0600 and 1700, Monday thru Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must, at all times, maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at the U.S. Army Corps of Engineers, Santa Rosa Dam, for the Santa Rosa Project Office, in Guadalupe County.

1.6.6 Type of Contract: The Government will award a firm, fixed-price contract.

1.6.7 Security Requirements: Contractor personnel performing work under this contract must comply with all stipulations set forth in this contract.

1.6.7.1 Physical Security: The Contractor shall be responsible for safeguarding all Government equipment, information and property provided for Contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.

Per the guidelines mandated with the implementation of OPORD 2013-74: Integrating Antiterrorism and Operations Security (OPSEC) into the USACE Acquisition Process, the following OPSEC provisions apply to this requirement:

1.6.7.2 AT Level I Training. All contractor employees, to include subcontractor employees, requiring access to Army installations, facilities, controlled access areas, or require network access, shall complete AT Level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. Upon request, the contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer (if a COR is not assigned), within 5 calendar days after completion of training by all employees and subcontractor personnel. AT Level I awareness training is available at the following website:

https://atlevel1.dtic.mil/at/; or it can be provided by the RA ATO in presentation form which will be documented via memorandum.

1.6.7.3 Access and General Protection/Security Policy and Procedures. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures.

1.6.7.4 Suspicious Activity Reporting Training (e.g. iWATCH, CorpsWatch, or See Something, Say Something). The contractor and all associated sub-contractors shall receive a brief/training (provided by the RA) on the local suspicious activity reporting program. This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the project manager, security representative or law enforcement entity. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 5 calendar days after the completion of the training.

1.6.7.5 OPSEC Training. All new contractor employees will complete Level I OPSEC Training within 30 calendar days of their reporting for duty. Additionally, all contractor employees must complete annual OPSEC awareness training. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee, to the COR or to the contracting officer (if a COR is not assigned), within 5 calendar days after completion of training. OPSEC awareness training is available at the following websites:

https://www.iad.gov/ioss/ or http://www.cdse.edu/catalog/operations-security.html; or it can be provided by the RA OPSEC Officer in presentation form which will be documented via memorandum.

1.6.7.6 Areas Where Contractors May be Exposed to Classified and/or Sensitive Materials and/or Sensitive or Restricted Areas. All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

1.6.7.7 Key Control: The Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons.

NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer.

1.6.7.7.1 In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.6.7.7.2 The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.6.7.8 Lock Combinations: The Contractor shall establish and implement methods of ensuring that all lock combinations are not revealed to unauthorized persons. The Contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations.

These procedures shall be included in the Contractor’s Quality Control Plan.

1.6.8 Special Qualifications: The Contractor is responsible for ensuring that all employees possess the required certifications, safety equipment, etc. Also, the Herbicide shall be applied by a State Certified Herbicide Applicator.

1.6.9 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.6.10 Contracting Officer’s Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract;

perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting contract.

1.6.11 Key Personnel: The following personnel are considered key personnel by the Government: Gary Cordova, Santa Rosa Dam Project Manager and Primary Point of Contact, (575) 472-3115 and Ralph Arias Maintenance Control Technician (575) 472-3115. The Contractor shall provide a Contract Manager who shall be responsible for the performance of the work. The name of this person, and an alternate who shall act for the Contractor when the manager is absent, shall be designated in writing to the Contracting Officer. The Contract Manager, or alternate, shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The Contract Manager, or alternate, shall be available between 7:00 a.m. to 4:30p.m, Monday thru Friday except Federal holidays or when the Government facility is closed for administrative reasons.

Qualifications for all key personnel are listed below

1.6.12 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their Contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by Contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. Contractor personnel will not be required to obtain and/or wear badges during the performance of this work.

PART 2

DEFINITIONS & ACRONYMS

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.3 Contracting Officer’s Representative (COR): An employee of the U.S. Government appointed by the Contracting Officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5 Deliverable: Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance (QA): The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.10 Quality Control (QC): All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime Contractor. The Government does not have privity of contract with the subcontractor.

2.1.12 Work Day: The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12 Work Week: Monday through Friday, unless specified otherwise.

2.2 Acronyms:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit USACE U.S. Army Corps of Engineers

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3.0 Government Furnished Items and Services:

3.1 Services The Government will provide a site visit, if requested by the Contractor. The Government will also provide guidance and progress meetings, as necessary.

3.2 Facilities The Government will provide the Contractor with any necessary keys or combinations to locks to access Santa Rosa Dam. Keys and lock combinations must be returned to the POC upon completion of the work described in this PWS. Bathroom facilities are accessible and available on-site to the Contractor.

3.3 Utilities The Government will make available and allow the Contractor the use of utilities for the tasks outlined in this PWS, if utilities are furnished, the following is required: The Contractor shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount to accomplish cleaning vehicles and equipment.

3.4 Equipment The Government will not provide any equipment for performance of this requirement.

3.5 Materials The Government will not provide any materials for performance of this requirement.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4.0 Contractor Furnished Items and Responsibilities:

4.1 General The Contractor shall furnish all supplies, equipment, materials, and services required to perform work under this contract that are not listed under Section 3 of this PWS.

4.2 Secret Facility Clearance: Not necessary at this facility.

4.3 Materials: The Contractor shall furnish all herbicides, water and other supplies needed to fulfill the requirements of this PWS.

4.4 Equipment: The Contractor shall furnish all tools, equipment necessary to fulfill the requirements of this PWS. Examples of equipment could include, but are not limited to, trucks, chainsaws, chippers, winches, and herbicide sprayers.

PART 5

SPECIFIC TASKS

5.0 Specific Tasks:

5.1 Basic Services: The Contractor shall provide all personnel, equipment, supplies, materials, facilities, transportation, tools, supervision, and any other items and non-personal services necessary to perform vegetation removal and herbicide treatment from the Santa Rosa Dam.

5.2 Vegetation Removal:

5.2.1 Contractor shall provide cut stump, on all woody vegetation with a trunk diameter of greater than approximately two (2) inches. The Contractor shall leave an approximately six (6) inch stump for future excavation.

5.2.2 The remaining vegetation should be cut to the base (using chain saws or other hand equipment – no mechanical equipment shall be used on the dam face or groin for this work).

5.2.3 The vegetative material shall be mulched and mulched material may be left on the dam face. Material that cannot be mulched will be spread out in the ‘disposal area’. The Contractor shall coordinate with Gary Cordova for exact location, and shall be treated with aquatic approved herbicide, if herbicide application is necessary, per the requirements described below in this PWS.

5.3 Herbicide Application:

5.3.1 Contractor shall provide treatment of all remaining vegetation on Santa Rosa Dam. This shall be accomplished by spraying with appropriate herbicide mixture (based on the vegetation type, the time of year, as well as efficacy) at the remaining base of the vegetation. The herbicide should contain a dye so that treatment of each stump may be visible.

5.3.2 Herbicide application should follow all applicable guidelines.

5.3.2.1 The Contractor shall comply with Federal Insecticide, Fungicide, and Rodenticide Act (Title 7 U.S.C. Section 136) for requirements on contractor's licensing, certification and record keeping. For application of Arsenal® in Guadalupe County, supplemental labeling for application to saltcedar for the state of New Mexico may apply. The New Mexico Department of Agriculture, Pesticide Management Bureau must be notified at least 24 hours prior to any Arsenal® application allowed under this 24(c) registration. The herbicide must not be applied within one (1) mile upstream or 500 feet downstream of drinking water intakes or irrigation water intakes currently in use. Before treating adjacent to any public water bodies, contact the controlling water authority (EPA, 2001). Contractor shall follow manufacturers’ instructions for application of Garlon®, (or an approved equal).

5.3.2.2 Herbicides shall be applied by a State Certified Herbicide Applicator, as applicable, and in accordance with EPA label restrictions and recommendation. The Certified Applicator shall wear clothing and personal protective equipment as specified on the herbicide label. Water used for formulating shall only come from locations designated by the POC. The Contractor shall not allow the equipment to overflow. Prior to application of herbicide, all equipment shall be inspected for leaks, clogging, wear, or damage and shall be repaired prior to being used. Note that herbicide which has been applied in accordance with the EPA label restrictions and recommendations is not considered a hazardous waste. Any unused products shall be disposed of offsite and in accordance with applicable guidelines.

5.3.2.3 Herbicide formulations shall be mixed or poured into spray equipment within designated staging areas.

These staging areas must be located away from the floodplain, irrigation canals or locations where groundwater, irrigation water or drinking water could potentially become contaminated.

5.3.2.4 No cutting or spraying should occur beyond the limits of the dam face and groin. Boundaries will be reviewed on site with the USACE Point of Contact (POC), Mr. Gary Cordova (575) 472-3115.

5.3.2.5 Work shall be performed in a manner that will limit disturbance to the dam face and groin. Areas that are disturbed shall be restored to its existing condition as approved by the USACE POC.

5.3.2.6 The Contractor shall re-treat stumps that are missed during initial herbicide treatment following site inspections by the Government. Contractor shall perform follow-up herbicide treatment of any root sprouts that occur after the first growing season.

5.4 All work must comply with the 2014 National Pollutant Discharge Elimination System Pesticide General Permit for Discharges from the Application of Pesticides. The Contractor shall comply with the Albuquerque District’s Pesticide Discharge Prevention Plan (PDPP) and shall provide all information required for necessary updates to the PDPP.

5.5 The Contractor shall contact the POC within 20 days after completion of herbicide application. A joint inspection of treated areas will be conducted to determine performance. If requirements are met, the Contractor may submit an invoice for payment at that time. If requirements are not met as determined by the inspection, the Contractor shall return within 3 working days, weather permitting, and re-spray unaffected vegetation prior to submitting invoices for the original application.

5.5.1 The Contractor shall notify the POC immediately of any damage to Government or private property and injury to any person resulting from Contractor operations.

5.5.2 The Contractor shall be responsible for restoring any Government facilities or structures damaged as a result of Contractor operations. Reasonable care shall be taken to avoid damage to existing structures and equipment. Any such damage shall be repaired or replaced as directed by the Contracting Officer, or their authorized representative, at no cost to the Government. If the Contractor does not make such repair or replacement, the cost thereof will be deducted from payments made to the Contractor. The Contractor shall advise the POC of any damage to the facilities due to vandalism or other causes on the day he/she first notices such damage. Upon completion of the work, the Contractor shall leave existing works in a condition equal to that which existed when work started.

5.6 Site Map: Attached Separately.

PART 6

APPLICABLE PUBLICATIONS

6.0 Applicable Publications (Current Editions):

The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures of the USACE Safety Manual, EM 385 1-1.

The Contractor shall comply with the Federal Insecticide, Fungicide, and Rodenticide Act (Title 7 U.S.C. Section 136).

All work must comply with the 2014 National Pollutant Discharge Elimination System Pesticide General Permit for Discharges from the Application of Pesticides.

6.1 The Contractor shall comply with the USACE Safety Manual, EM 385 1-1 and the Albuquerque District’s Pesticide Discharge Prevention Plan (PDPP) and shall provide all information required for necessary updates to the PDPP.

USACE Safety Manual, EM 385 1-1

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7.0 Attachment/Technical Exhibit List:

7.1 Attachment 1/Technical Exhibit 1 – Performance Requirements Summary

7.2 Attachment 2/Technical Exhibit 2 – Deliverables Schedule

TECHNICAL EXHIBIT 1

Performance Requirements Summary

The Contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum satisfactory levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective Standard Performance Threshold Method of

Surveillance

PRS # 1.

The Contractor shall provide and Comply with Part 5 of the PWS. Specifically 5.2 Vegetation Removal.

The Contractor provided 100% removal of vegetation within project boundaries as shown on the map

The Contractor provided a minimum of 90% Vegetation removal within project boundaries.

The POC shall provide periodical surveillance on site for compliance.

PRS # 2.

The Contractor shall provide and Comply with Part 5 of the PWS. Specifically 5.3 Herbicide Application.

The Contractor provided 100% herbicide treatment of non-native resprouts within project boundaries as shown on the map

The Contractor provided a minimum of 90% herbicide treatment of non-native resprouts within project boundaries.

The POC shall provide periodical surveillance on site for compliance.

TECHNICAL EXHIBIT 2

DELIVERABLES SCHEDULE

Deliverable Frequency # of Copies Medium/Format Submit To Daily logs of Vegetation Removal

Provide log weekly

One copy (1) Via e-mail Or Hard copy

Gary Cordova gary.l.cordova@usace.army.mil 2528 Joe & Louie Page Road Santa Rosa, NM 88435

Daily logs of Herbicide Application

Provide log weekly

One copy (1) Via e-mail Or Hard copy

Gary Cordova gary.l.cordova@usace.army.mil 2528 Joe & Louie Page Road Santa Rosa, NM 88435

WAGE DETERMINATION

WD 05-2361 (Rev.-18) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2361 Daniel W. Simms Division of | Revision No.: 18 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New Mexico

Area: New Mexico Counties of Bernalillo, Catron, Cibola, Colfax, De Baca, Guadalupe, Harding, Los Alamos, McKinley, Mora, Rio Arriba, San Juan, San Miguel, Sandoval, Santa Fe, Socorro, Taos, Torrance, Valencia **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.01 01012 - Accounting Clerk II 14.60 01013 - Accounting Clerk III 16.33 01020 - Administrative Assistant 18.17 01040 - Court Reporter 18.61 01051 - Data Entry Operator I 11.03 01052 - Data Entry Operator II 13.44 01060 - Dispatcher, Motor Vehicle 15.56 01070 - Document Preparation Clerk 13.86 01090 - Duplicating Machine Operator 13.86 01111 - General Clerk I 11.35 01112 - General Clerk II 12.39 01113 - General Clerk III 13.90 01120 - Housing Referral Assistant 16.74 01141 - Messenger Courier 9.98 01191 - Order Clerk I 11.33 01192 - Order Clerk II 12.91 01261 - Personnel Assistant (Employment) I 13.80 01262 - Personnel Assistant (Employment) II 15.44 01263 - Personnel Assistant (Employment) III 17.22 01270 - Production Control Clerk 21.06 01280 - Receptionist 11.02 01290 - Rental Clerk 12.25 01300 - Scheduler, Maintenance 13.42 01311 - Secretary I 13.42 01312 - Secretary II 15.01 01313 - Secretary III 16.74

01320 - Service Order Dispatcher 14.08 01410 - Supply Technician 18.60 01420 - Survey Worker 14.01 01531 - Travel Clerk I 11.82 01532 - Travel Clerk II 12.76 01533 - Travel Clerk III 13.57 01611 - Word Processor I 11.91 01612 - Word Processor II 13.37 01613 - Word Processor III 14.95 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 18.06 05010 - Automotive Electrician 18.12 05040 - Automotive Glass Installer 15.82 05070 - Automotive Worker 15.82 05110 - Mobile Equipment Servicer 13.50 05130 - Motor Equipment Metal Mechanic 17.99 05160 - Motor Equipment Metal Worker 15.82 05190 - Motor Vehicle Mechanic 18.12 05220 - Motor Vehicle Mechanic Helper 13.62 05250 - Motor Vehicle Upholstery Worker 15.82 05280 - Motor Vehicle Wrecker 15.82 05310 - Painter, Automotive 17.19 05340 - Radiator Repair Specialist 15.82 05370 - Tire Repairer 11.49 05400 - Transmission Repair Specialist 17.99 07000 - Food Preparation And Service Occupations 07010 - Baker 11.60 07041 - Cook I 9.75 07042 - Cook II 11.64 07070 - Dishwasher 7.89 07130 - Food Service Worker 9.36 07210 - Meat Cutter 16.07 07260 - Waiter/Waitress 7.80 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 14.65 09040 - Furniture Handler 11.44 09080 - Furniture Refinisher 14.65 09090 - Furniture Refinisher Helper 12.45 09110 - Furniture Repairer, Minor 13.85 09130 - Upholsterer 14.65 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.11 11060 - Elevator Operator 9.11 11090 - Gardener 14.29 11122 - Housekeeping Aide 9.73 11150 - Janitor 9.73 11210 - Laborer, Grounds Maintenance 10.39 11240 - Maid or Houseman 8.48 11260 - Pruner 8.88 11270 - Tractor Operator 13.22 11330 - Trail Maintenance Worker 10.39 11360 - Window Cleaner 11.39 12000 - Health Occupations 12010 - Ambulance Driver 15.94 12011 - Breath Alcohol Technician 18.04 12012 - Certified Occupational Therapist Assistant 25.32 12015 - Certified Physical Therapist Assistant 21.02 12020 - Dental Assistant 14.93 12025 - Dental Hygienist 36.30 12030 - EKG Technician 26.19 12035 - Electroneurodiagnostic Technologist 26.19

12040 - Emergency Medical Technician 15.94 12071 - Licensed Practical Nurse I 18.73 12072 - Licensed Practical Nurse II 20.92 12073 - Licensed Practical Nurse III 23.32 12100 - Medical Assistant 13.10 12130 - Medical Laboratory Technician 18.44 12160 - Medical Record Clerk 13.62 12190 - Medical Record Technician 15.65 12195 - Medical Transcriptionist 14.42 12210 - Nuclear Medicine Technologist 36.03 12221 - Nursing Assistant I 10.38 12222 - Nursing Assistant II 11.67 12223 - Nursing Assistant III 12.74 12224 - Nursing Assistant IV 14.29 12235 - Optical Dispenser 14.29 12236 - Optical Technician 14.53 12250 - Pharmacy Technician 14.09 12280 - Phlebotomist 14.29 12305 - Radiologic Technologist 26.71 12311 - Registered Nurse I 25.39 12312 - Registered Nurse II 31.06 12313 - Registered Nurse II, Specialist 31.06 12314 - Registered Nurse III 37.58 12315 - Registered Nurse III, Anesthetist 37.58 12316 - Registered Nurse IV 45.04 12317 - Scheduler (Drug and Alcohol Testing) 20.31 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.35 13012 - Exhibits Specialist II 21.18 13013 - Exhibits Specialist III 25.33 13041 - Illustrator I 16.10 13042 - Illustrator II 19.95 13043 - Illustrator III 23.03 13047 - Librarian 22.91 13050 - Library Aide/Clerk 9.11 13054 - Library Information Technology Systems 20.67 Administrator 13058 - Library Technician 13.73 13061 - Media Specialist I 15.31 13062 - Media Specialist II 17.18 13063 - Media Specialist III 19.07 13071 - Photographer I 15.88 13072 - Photographer II 17.63 13073 - Photographer III 21.70 13074 - Photographer IV 24.30 13075 - Photographer V 29.39 13110 - Video Teleconference Technician 18.57 14000 - Information Technology Occupations 14041 - Computer Operator I 14.98 14042 - Computer Operator II 16.76 14043 - Computer Operator III 19.12 14044 - Computer Operator IV 21.26 14045 - Computer Operator V 24.34 14071 - Computer Programmer I (see 1) 22.41 14072 - Computer Programmer II (see 1) 26.14 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.98

14160 - Personal Computer Support Technician 21.52 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.62 15020 - Aircrew Training Devices Instructor (Rated) 33.39 15030 - Air Crew Training Devices Instructor (Pilot) 40.05 15050 - Computer Based Training Specialist / Instructor 27.62 15060 - Educational Technologist 25.93 15070 - Flight Instructor (Pilot) 40.05 15080 - Graphic Artist 22.41 15090 - Technical Instructor 18.61 15095 - Technical Instructor/Course Developer 25.06 15110 - Test Proctor 15.01 15120 - Tutor 15.01 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.80 16030 - Counter Attendant 8.80 16040 - Dry Cleaner 10.58 16070 - Finisher, Flatwork, Machine 8.80 16090 - Presser, Hand 8.80 16110 - Presser, Machine, Drycleaning 8.80 16130 - Presser, Machine, Shirts 8.80 16160 - Presser, Machine, Wearing Apparel, Laundry 8.80 16190 - Sewing Machine Operator 11.15 16220 - Tailor 11.73 16250 - Washer, Machine 9.39 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19.95 19040 - Tool And Die Maker 24.09 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.21 21030 - Material Coordinator 21.06 21040 - Material Expediter 21.06 21050 - Material Handling Laborer 10.90 21071 - Order Filler 11.53 21080 - Production Line Worker (Food Processing) 14.21 21110 - Shipping Packer 13.14 21130 - Shipping/Receiving Clerk 13.14 21140 - Store Worker I 8.78 21150 - Stock Clerk 13.78 21210 - Tools And Parts Attendant 14.21 21410 - Warehouse Specialist 14.21 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 24.01 23021 - Aircraft Mechanic I 22.48 23022 - Aircraft Mechanic II 24.01 23023 - Aircraft Mechanic III 25.31 23040 - Aircraft Mechanic Helper 16.62 23050 - Aircraft, Painter 20.56 23060 - Aircraft Servicer 18.79 23080 - Aircraft Worker 20.11 23110 - Appliance Mechanic 14.70 23120 - Bicycle Repairer 10.94 23125 - Cable Splicer 21.67 23130 - Carpenter, Maintenance 16.70 23140 - Carpet Layer 17.16 23160 - Electrician, Maintenance 21.52 23181 - Electronics Technician Maintenance I 25.16 23182 - Electronics Technician Maintenance II 27.32 23183 - Electronics Technician Maintenance III 29.47 23260 - Fabric Worker 15.70 23290 - Fire Alarm System Mechanic 18.76

23310 - Fire Extinguisher Repairer 14.23 23311 - Fuel Distribution System Mechanic 21.10 23312 - Fuel Distribution System Operator 16.38 23370 - General Maintenance Worker 15.10 23380 - Ground Support Equipment Mechanic 22.48 23381 - Ground Support Equipment Servicer 18.79 23382 - Ground Support Equipment Worker 20.11 23391 - Gunsmith I 14.23 23392 - Gunsmith II 17.16 23393 - Gunsmith III 20.11 23410 - Heating, Ventilation And Air-Conditioning 19.25 Mechanic 23411 - Heating, Ventilation And Air Contditioning 21.26 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 19.48 23440 - Heavy Equipment Operator 17.25 23460 - Instrument Mechanic 27.47 23465 - Laboratory/Shelter Mechanic 18.64 23470 - Laborer 10.90 23510 - Locksmith 18.64 23530 - Machinery Maintenance Mechanic 22.60 23550 - Machinist, Maintenance 21.25 23580 - Maintenance Trades Helper 12.56 23591 - Metrology Technician I 27.47 23592 - Metrology Technician II 29.34 23593 - Metrology Technician III 30.82 23640 - Millwright 20.11 23710 - Office Appliance Repairer 19.21 23760 - Painter, Maintenance 15.94 23790 - Pipefitter, Maintenance 22.03 23810 - Plumber, Maintenance 20.60 23820 - Pneudraulic Systems Mechanic 20.11 23850 - Rigger 20.11 23870 - Scale Mechanic 17.16 23890 - Sheet-Metal Worker, Maintenance 19.22 23910 - Small Engine Mechanic 15.07 23931 - Telecommunications Mechanic I 24.06 23932 - Telecommunications Mechanic II 25.71 23950 - Telephone Lineman 21.26 23960 - Welder, Combination, Maintenance 18.39 23965 - Well Driller 19.77 23970 - Woodcraft Worker 20.11 23980 - Woodworker 16.61 24000 - Personal Needs Occupations 24570 - Child Care Attendant 10.31 24580 - Child Care Center Clerk 14.77 24610 - Chore Aide 9.40 24620 - Family Readiness And Support Services 13.49 Coordinator 24630 - Homemaker 17.49 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 19.77 25040 - Sewage Plant Operator 18.32 25070 - Stationary Engineer 19.77 25190 - Ventilation Equipment Tender 12.56 25210 - Water Treatment Plant Operator 17.38 27000 - Protective Service Occupations 27004 - Alarm Monitor 13.86 27007 - Baggage Inspector 11.23 27008 - Corrections Officer 15.36 27010 - Court Security Officer 16.86

27030 - Detection Dog Handler 13.16 27040 - Detention Officer 15.36 27070 - Firefighter 16.86 27101 - Guard I 11.23 27102 - Guard II 12.56 27131 - Police Officer I 18.47 27132 - Police Officer II 20.52 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.55 28042 - Carnival Equipment Repairer 14.77 28043 - Carnival Equpment Worker 9.34 28210 - Gate Attendant/Gate Tender 13.59 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 15.21 28510 - Recreation Aide/Health Facility Attendant 11.10 28515 - Recreation Specialist 18.06 28630 - Sports Official 12.11 28690 - Swimming Pool Operator 18.36 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 20.42 29020 - Hatch Tender 20.42 29030 - Line Handler 20.42 29041 - Stevedore I 19.04 29042 - Stevedore II 22.17 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 17.39 30022 - Archeological Technician II 19.50 30023 - Archeological Technician III 23.87 30030 - Cartographic Technician 24.17 30040 - Civil Engineering Technician 24.00 30061 - Drafter/CAD Operator I 17.39 30062 - Drafter/CAD Operator II 19.50 30063 - Drafter/CAD Operator III 21.75 30064 - Drafter/CAD Operator IV 25.91 30081 - Engineering Technician I 15.18 30082 - Engineering Technician II 17.03 30083 - Engineering Technician III 19.05 30084 - Engineering Technician IV 23.61 30085 - Engineering Technician V 28.88 30086 - Engineering Technician VI 34.94 30090 - Environmental Technician 20.36 30210 - Laboratory Technician 22.61 30240 - Mathematical Technician 24.17 30361 - Paralegal/Legal Assistant I 15.40 30362 - Paralegal/Legal Assistant II 19.08 30363 - Paralegal/Legal Assistant III 23.34 30364 - Paralegal/Legal Assistant IV 28.24 30390 - Photo-Optics Technician 24.17 30461 - Technical Writer I 21.22 30462 - Technical Writer II 25.96 30463 - Technical Writer III 31.40 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.75 Surface Programs

30621 - Weather Observer, Senior (see 2) 24.17 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 10.73 31030 - Bus Driver 17.17 31043 - Driver Courier 13.34 31260 - Parking and Lot Attendant 9.72 31290 - Shuttle Bus Driver 13.56 31310 - Taxi Driver 10.53 31361 - Truckdriver, Light 13.56 31362 - Truckdriver, Medium 16.66 31363 - Truckdriver, Heavy 18.93 31364 - Truckdriver, Tractor-Trailer 18.93 99000 - Miscellaneous Occupations 99030 - Cashier 9.11 99050 - Desk Clerk 9.14 99095 - Embalmer 23.74 99251 - Laboratory Animal Caretaker I 11.13 99252 - Laboratory Animal Caretaker II 12.42 99310 - Mortician 23.75 99410 - Pest Controller 17.07 99510 - Photofinishing Worker 12.14 99710 - Recycling Laborer 12.03 99711 - Recycling Specialist 15.57 99730 - Refuse Collector 10.99 99810 - Sales Clerk 11.98 99820 - School Crossing Guard 10.28 99830 - Survey Party Chief 19.48 99831 - Surveying Aide 17.72 99832 - Surveying Technician 17.87 99840 - Vending Machine Attendant 11.72 99841 - Vending Machine Repairer 14.59 99842 - Vending Machine Repairer Helper 10.51

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years, and 4 after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541.