W912PL21B0003_Amendment0003_PlansAndSpecs.pdf

(SEE ITEM 13)

Santa Ana Mainstem Prado Dam River Road Dike W912PL21B0003 Riverside County, CA

SF 30 CONTINUATION PAGE 1 OF 1

SF 30 BLOCK 14 CONTINUATION

SUMMARY OF CHANGES

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

Section Number Section Title

SF-1442 SOLICITATION AND AWARD

00 01 10 TABLE OF CONTENTS

00 10 00 CONTRACT LINE ITEM NUMBER (CLIN) SCHEDULE

Updated quantities.

00 21 13 INSTRUCTIONS TO BIDDERS

Updated page 5 to reflect new bid opening date and to add the call in number

00 73 46 Updated Wage Rates

DIVISION 01 – 48 - TECHNICAL SPECIFICATIONS

Section Number Section Title

01 22 00 PRICE AND PAYMENT PROCEDURES

Added the new requirements for the Borrow Area Closure.

31 00 00 EARTHWORK

Added additional requirements to the Borrow Area Closure and removed mention of Select Zone I from the Sand Castle Test.

DRAWINGS

Sheet Number Sheet Title

G-002 INDEX TO DRAWINGS

Index updated to reflect sheets that have been revised per amendment.

CU101 PLAN AND PROFILE CULVERT

Removed the TYP callout for clarification and added rebar to concrete cradle.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

PAGE OF PAGES

IMPORTANT - The "offer" section on the reverse must be fully completed by the offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE

9. FOR INFORMATION CALL

B. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

11. The Contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory, negotiable. (See .)

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

12B. CALENDAR DAYS

YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour)

B. An offer guarantee is, is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

NSN 7540-01-155-3212

Designed using Perform Pro, WHS/DIOR, Oct 96

1442-103 STANDARD FORM 1442 (REV. 4-85) (EG)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

W912PL21B0003 x

3. DATE ISSUED

2 August

1 OF

U.S.Army Corps of Engineers, Los Angeles Dist Attn:Contracting Division CESPL-CT-W 915 Wilshire Boulevard, Suite 930 Los Angeles, California 90017-3401

A. NAME

Michael G Robinson 213-452-3311

10 see 00 73 00

X X *Section 00 73 00

X 10

1 Digital 1:00 PM

3 September 2021 If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror’s name and address, the solicitation number, and the date and time offers are due.

X

8. ADDRESS OFFER TO

Bids are to be submitted electronically, DoD Secure Access File Exchange (DoD Safe) at https://safe.apps.mil/ in accordance with Section 00 21 13, Instructions Pertaining to Submission of Electronic Bids (APR 2020).

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date):

Santa Ana Mainstem Prado Dam River Road Dike, Eastvale, Riverside and San Bernardino Counties, CA

The project is a 1,750 linear feet earthen filled dike flood control structure. The earthen filled dike will have a crest width of 21 feet and crest elevation 567.00 feet at the control line of the dike. This results in a maximum dike height of approximately 18 feet. The dike will have side slopes of 2.25 horizontal to 1 vertical (2.25H:1V). The interior drainage will discharge through two 48 inch diameter reinforced concrete pressure pipes locate at Sta. 4+60. Secant pile walls will be constructed at the tie in locations adjacent to existing residential properties.

Period of Performance is 730 Calendar Days. Completion of CLINS 0001 - 0026, 0028 and 0029 shall be completed in 365 days. Completion of Line Item 0027 "Landscape Establishment" will be 365 days and will not begin until the first 365 days of construction are completed.

The Estimate cost range for this procurement is $5,000,000.00 - $10,000,000.00

This procurement is a 100% HUBZone Set Aside. The NAICS Code is 237990 "Other Heavy and Civil Engineering Construction. The size Standard is $39,500,000.00.

Be advised this project may delayed, postponed, canceled or revised at any time prior to award.

Amendment 0003

OFFER (Must be fully completed by offeror)

STANDARD FORM 1442 BACK (REV. 4-85)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal or greater than the minimum requirement stated in 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation - give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24.SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BYCODE

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to the issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and

(c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD. (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN

(Type or print)

30B. SIGNATURE 30C. DATE

31A. NAME OF CONTRACTING OFFICER (Type or print)

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

DUNS NO.: TAX ID NO.:

CAGE CODE NO.:

( ) - ; FAX ( ) -

See Section 00 10 00 Solicitation Contract Line Item Number (CLIN) Schedule

Santa Ana Dams Resident Office 2493 Pomona Riccon Rd.

Corona, CA 92880

USACE, Finance Center

ATTN: CEFCO-AO-D

5722 Integrity Drive Millington, TN 38054-5005

Santa Ana Mainstem Prado Dam River Road Dike

W912PL21B0003

Am3 00 01 05 00 01 10 Am1 Am2 Am3 00 10 00 Am2 Am3 00 21 00 00 21 13 00 45 00 00 70 00 00 73 00 00 73 46

01 11 00 01 22 00 Am3 01 32 01 01 33 00 01 35 26 01 42 00 01 45 00 01 45 01 01 50 00

01 57 19

01 74 19 CONSTRUCTION AND WASTE MANAGEMENT AND DISPOSAL

01 78 00

03 30 00 03 30 57 Am2

03 36 00 GROUTING STONE PROTECTION

05 50 15

31 00 00 Am3

31 05 19 GEOTEXTILES FOR EARTHWORK

31 09 13 Am1 31 11 00

31 23 19 DIVERSION AND CONTROL OF SURFACE WATER

31 63 29 DRILLED CONCRETE PIERS AND SHAFTS

32 11 23 32 12 17 32 31 13

SUBMITTAL PROCEDURES

GOVERNMENTAL SAFETY REQUIREMENTS

EARTHWORK

GEOTECHNICAL INSTRUMENTATION AND MONITORING

CLEARING AND GRUBBING

TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SUMMARY OF WORK

PRICE AND PAYMENT PROCEDURES

PROJECT SCHEDULE

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

SF-1442 - SOLICITATION AND AWARD

CERTIFICATION PAGE

TABLE OF CONTENTS

CONTRACT LINE ITEM NUMBER (CLIN) SCHEDULE

INSTRUCTIONS

INSTRUCTIONS TO BIDDERS

REPRESENTATION AND CERTIFICATIONS

CONDITIONS OF THE CONTRACT

SUPPLEMENTARY CONDITIONS

WAGE RATES

SECTION 00 01 10

SOURCES FOR REFERENCE PUBLICATIONS

QUALITY CONTROL

TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

CLOSEOUT SUBMITTALS

DIVISION 03 - CONCRETE

TEMPORARY ENVIRONMENTAL CONTROLS (SANTA ANA RIVER BASIN)

RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS CM)

CAST-IN-PLACE CONCRETE

CONTROLLED LOW-STRENGTH MATERIAL (CLSM)

DIVISION 05 - METALS

CIVIL WORKS FABRICATIONS

DIVISION 31 - EARTHWORK

DIVISION 32 - EXTERIOR IMPROVEMENTS

AGGREGATE BASE COURSE

HOT-MIX ASPHALT BITUMINOUS PAVEMENT

CHAIN LINK FENCES AND GATES

25 August 2021

TABLE OF CONTENTS PAGE 1

Amendment 0003

Am3

Am3

W912PL21B0003

32 92 19 Am1 32 93 00

33 40 00 Am2

35 31 19

Am1

-- End of Project Table of Contents --

DIVISION 35 - STONE PROTECTION

STONE PROTECTION

SEEDING

EXTERIOR PLANTING

STORM DRAINAGE UTILITIES

DIVISION 33 - UTILITIES

APPENDIX A - UTILITY IMPROVEMENTS

25 August 2021

TABLE OF CONTENTS PAGE 2

W912PL21B0003

Item Description Quantity Unit Unit Price

Amount

0001 Well Abandonment 1 Job JA $

0002 Control of Surface Water 1 Job JA $

0003 Clear Site and Remove Obstructions 1 Job JA $

0004 Stripping 1,422,169 SF $ $

0005 Sound Wall 980 LF $ $

0006 Secant Pile Wall 1 JOB JA $

0007 Utility Improvements 1 Job JA $

0008 Excavation 70,080 CY $ $

0009 Overexcavation

0009A First 4,000 CY 4,000 CY $ $

0009B Over 4,000 CY 6,000 CY $ $

0010 Embankment Fill 74,190 CY $ $

0011 General Fill 49,046 CY $ $

0012 Filter Drain 1,810 CY $ $

0013 Monitoring Well 1 Job JA $

CONTRACTOR MUST FURNISH ALL PLANT, LABOR, MATERIAL,

EQUIPMENT, ETC. NECESSARY TO PERFORM ALL WORK IN STRICT

ACCORDANCE WITH THE TERMS AND CONDITIONS SET FORTH IN THE

CONTRACT TO INCLUDE ALL ATTACHMENTS THERETO.

SECTION 00 10 00

SOLICITATION CONTRACT LINE ITEM (CLIN) SCHEDULE

Bidding Schedule

25 August 2021 1 Amendment 0003

W912PL21B0003

Item Description Quantity Unit Unit Price

Amount

0014 Riprap 12,662 TON $ $

0015 Bedding 5,725 TON $ $

0016 Aggregate Base Course 3,233 TON $ $

0017 Hot Mix Bituminous Pavement 1,140 TON $ $

0018 Concrete Swale 775 LF $ $

0019 Concrete Ramp 1 Job JA $

0020 Chain Link Fence and Gate 1 Job JA $

0021 Settlement Monuments 12 EA $ $

0022 Settlement Bases 1 EA $ $

0023 Culvert 1 JOB JA $

0024 Geotechnical Instrumentation 1 Job JA $

0025 Landscape Planting and Hydroseeding 72 AC $ $

0026 Temporary Irrigation 72 AC $ $

0027 Landscape Establishment 72 AC $ $

0028 Borrow Area Closure 1 Job JA $

$TOTAL ESTIMATED AMOUNT:

(Line Items 0001 through 0028)

25 August 2021 2 Amendment 0003

Santa Ana Mainstem, Prado Dam River Road Dike W912PL21B0003 Riverside and San Bernardino Counties, CA

RECEIPT OF SUBMISSIONS:

For the purposes of establishing whether a bid submission is considered timely, the government considers the date and time the submission is completely uploaded into the SAFE website. For bids larger than the 8GB capacity of the SAFE website and require multiple submissions, the Government will consider the date and time the last submission is completely uploaded into the SAFE website. Do not assume that electronic communication is instantaneous. It can take several minutes or even hours in some cases.

The government will not be responsible for submissions delivered to any location or to anyone other than those designated to receive bids. Bidders are responsible for ensuring that bids are submitted so as to reach the designated recipient. Bidders are responsible for allowing sufficient time for the bid to be received in accordance with the instructions provided.

(End of statement)

VIRTUAL BID OPENING PROCEDURES AND INSTRUCTIONS FOR BIDDER’S PARTICIPATON

The electronic bids for this project are due on 3 September 2021 at 1:00 PM Local time.

In order to allow the bid opening officer sufficient time to download the bids after bids are due, the virtual bid opening will be held at 3:00 PM local time on 3 September 2021.

At the bid opening teleconference, bids and the Independent Government Estimate will be read aloud, just as in a traditional bid opening.

Following the bid opening a copy of the bid abstract and any bid can be made available for public inspection by interested persons by emailing a copy of the abstract and requested bids to those who participated in the virtual bid opening. In addition, in accordance with established practices, the Abstract of Bids will be available at sam.gov for all interested parties.

To participate in the Virtual Bid Opening, the following information is provided:

844-800-2712

Access Number 199-827-1077

(End of statement)

CONTRACTOR RESPONSIBILITY, PRE-AWARD SURVEY INFORMATION TO BE SUBMITTED

WITH BID

In order to determine a contractor's responsibility for purposes of contract award in accordance with FAR Part 9, a statement regarding previous experience in performing comparable work and information related to their business organization, financial resources, and/or plant to be used in

Section 00 21 13

Section 00 73 46 Amendment 0003

Section 00 73 46

Construction Wage Decision

(Pages 2 -52)

Service Contract Act Wage Decision

(Pages 53 – 78)

"General Decision Number: CA20210025 08/20/2021

Superseded General Decision Number: CA20200025

State: California

Construction Types: Building, Heavy (Heavy and Dredging) and

Highway

County: Riverside County in California.

BUILDING CONSTRUCTION PROJECTS; DREDGING PROJECTS (does not include hopper dredge work); HEAVY CONSTRUCTION PROJECTS (does not include water well drilling); HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January

1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage

Amendment 0003 determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year

2021. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the

Davis-Bacon Related Acts, including those set forth at 29 CFR

5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/01/2021

1 01/08/2021

2 01/22/2021

3 03/05/2021

4 03/19/2021

5 04/30/2021

6 06/25/2021

Amendment 0003

7 07/23/2021

8 07/30/2021

9 08/06/2021

10 08/20/2021

ASBE0005-002 07/05/2021

Rates Fringes

Asbestos Workers/Insulator

(Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 47.25 24.45

Fire Stop Technician

(Application of Firestopping

Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 28.92 18.73

ASBE0005-004 07/01/2019

Asbestos Removal worker/hazardous material

Amendment 0003 handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 20.63 12.17

BOIL0092-003 01/01/2021

BOILERMAKER......................$ 46.03 38.81

* BRCA0004-011 05/01/2020

BRICKLAYER; MARBLE SETTER........$ 41.48 18.63

*The wage scale for prevailing wage projects performed in

Blythe, China lake, Death Valley, Fort Irwin, Twenty-Nine

Palms, Needles and 1-15 corridor (Barstow to the Nevada

State Line) will be Three Dollars ($3.00) above the standard San Bernardino/Riverside County hourly wage rate

BRCA0018-004 06/01/2019

MARBLE FINISHER..................$ 33.43 14.11

TILE FINISHER....................$ 28.23 12.65

TILE LAYER.......................$ 40.07 18.36

BRCA0018-010 09/01/2020

TERRAZZO FINISHER................$ 33.66 14.20

TERRAZZO WORKER/SETTER...........$ 41.60 14.73

CARP0409-001 07/01/2018

CARPENTER

(1) Carpenter, Cabinet

Installer, Insulation

Installer, Hardwood Floor

Worker and acoustical installer...................$ 41.84 19.17

(2) Millwright..............$ 42.91 19.17

(3) Piledrivermen/Derrick

Bargeman, Bridge or Dock

Amendment 0003

Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler

(Commercial)................$ 42.54 19.17

(4) Pneumatic Nailer, Power Stapler...............$ 40.09 19.17

(5) Sawfiler...............$ 39.83 19.17

(6) Scaffold Builder.......$ 31.60 19.17

(7) Table Power Saw

Operator....................$ 40.93 19.17

FOOTNOTE: Work of forming in the construction of open cut sewers or storm drains, on operations in which horizontal lagging is used in conjunction with steel H-Beams driven or placed in pre- drilled holes, for that portion of a lagged trench against which concrete is poured, namely, as a substitute for back forms (which work is performed by piledrivers): $0.13 per hour additional.

CARP0409-002 07/01/2016

Diver

(1) Wet.....................$ 712.48 17.03

(2) Standby.................$ 356.24 17.03

(3) Tender..................$ 348.24 17.03

(4) Assistant Tender........$ 324.24 17.03

Amounts in ""Rates' column are per day

CARP0409-005 07/01/2015

Drywall

DRYWALL INSTALLER/LATHER....$ 37.35 11.08

STOCKER/SCRAPPER............$ 10.00 7.17

CARP0409-008 08/01/2010

Modular Furniture Installer......$ 17.00 7.41

ELEC0440-001 12/28/2020

ELECTRICIAN

INSIDE ELECTRICIAN..........$ 46.75 3%+23.67

INTELLIGENT TRANSPORTATION

SYSTEMS

Electrician................$ 36.99 3%+23.18

Technician.................$ 27.75 3%+23.18

ZONE PAY: Zone A: Free travel zone for all contractors performing work in Zone A.

Zone B:Any work performed in Zone (B) shall add $12.00 per hour to the current wage scale. Zone (B) shall be the area from the eastern perimeter of Zone (A) to a line which runs north and south begininng at Little Morongo Canyon (San

Bernardino/Riverside County Line), Southeast along the

Coachella Tunnels, Colorado River Aqueduct and Mecca

Tunnels to Pinkham Wash then South to Box Canyon Road, then southwest along Box Canyon Road to Highway 195 west onto

195 south to Highway 86 to Riverside/Imperial County Line.

ELEC1245-001 06/01/2021

LINE CONSTRUCTION

(1) Lineman; Cable splicer..$ 60.19 21.94

(2) Equipment specialist

(operates crawler tractors, commercial motor vehicles, backhoes, trenchers, cranes (50 tons and below), overhead & underground distribution line equipment)...........$ 48.08 20.73

Amendment 0003

(3) Groundman...............$ 36.76 20.33

(4) Powderman...............$ 51.87 18.79

HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day and day after Thanksgiving, Christmas Day

ELEV0018-001 01/01/2021

ELEVATOR MECHANIC................$ 59.32 35.825+a+b

FOOTNOTE:

a. PAID VACATION: Employer contributes 8% of regular hourly rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of service.

b. PAID HOLIDAYS: New Year's Day, Memorial Day, Independence

Day, Labor Day, Veterans' Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.

ENGI0012-003 07/01/2020

OPERATOR: Power Equipment

Amendment 0003

(All Other Work)

GROUP 1....................$ 48.25 27.20

GROUP 2....................$ 49.03 27.20

GROUP 3....................$ 49.32 27.20

GROUP 4....................$ 50.81 27.20

GROUP 5....................$ 48.96 25.25

GROUP 6....................$ 51.03 27.20

GROUP 8....................$ 51.14 27.20

GROUP 9....................$ 49.29 25.25

GROUP 10....................$ 51.26 27.20

GROUP 11....................$ 49.41 25.25

GROUP 12....................$ 51.43 27.20

GROUP 13....................$ 51.53 27.20

GROUP 14....................$ 51.56 27.20

GROUP 15....................$ 51.64 27.20

GROUP 16....................$ 51.76 27.20

GROUP 17....................$ 51.93 27.20

GROUP 18....................$ 52.03 27.20

GROUP 19....................$ 52.14 27.20

GROUP 20....................$ 52.26 27.20

GROUP 21....................$ 52.43 27.20

GROUP 22....................$ 52.53 27.20

GROUP 23....................$ 52.64 27.20

GROUP 24....................$ 52.76 27.20

GROUP 25....................$ 52.93 27.20

OPERATOR: Power Equipment

(Cranes, Piledriving &

Hoisting)

Amendment 0003

GROUP 1....................$ 49.60 27.20

GROUP 2....................$ 50.38 27.20

GROUP 3....................$ 50.67 27.20

GROUP 4....................$ 50.81 27.20

GROUP 5....................$ 51.03 27.20

GROUP 6....................$ 51.14 27.20

GROUP 7....................$ 51.26 27.20

GROUP 8....................$ 51.43 27.20

GROUP 9....................$ 51.60 27.20

GROUP 10....................$ 52.60 27.20

GROUP 11....................$ 53.60 27.20

GROUP 12....................$ 54.60 27.20

GROUP 13....................$ 55.60 27.20

OPERATOR: Power Equipment

(Tunnel Work)

GROUP 1....................$ 50.10 27.20

GROUP 2....................$ 50.88 27.20

GROUP 3....................$ 51.17 27.20

GROUP 4....................$ 51.31 27.20

GROUP 5....................$ 51.53 27.20

GROUP 6....................$ 51.64 27.20

GROUP 7....................$ 51.76 27.20

PREMIUM PAY:

$3.75 per hour shall be paid on all Power Equipment Operator work on the followng Military Bases: China Lake Naval

Reserve, Vandenberg AFB, Point Arguello, Seely Naval Base, Fort Irwin, Nebo Annex Marine Base, Marine Corp Logistics

Amendment 0003

Base Yermo, Edwards AFB, 29 Palms Marine Base and Camp

Pendleton

Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.

SEE ZONE DEFINITIONS AFTER CLASSIFICATIONS

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch

Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator

(includes loed, lull or similar types under 5 tons;

Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman

GROUP 2: Asphalt-rubber plant operator (nurse tank operator);

Concrete mixer operator-skip type; Conveyor operator;

Fireman; Forklift operator (includes loed, lull or similar types over 5 tons; Hydrostatic pump operator; oiler crusher

(asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine operator (or similar types); Skiploader (wheel type up to 3/4 yd.

without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler

GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (Skid steer); Equipment greaser (rack); Ford Ferguson

(with dragtype attachments); Helicopter radioman (ground);

Stationary pipe wrapping and cleaning machine operator

GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman

(asphalt or concrete); Chip spreading machine operator;

Concrete cleaning decontamination machine operator;

Concrete Pump Operator (small portable); Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Hydra-hammer-aero stomper; Micro Tunneling

(above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel

Saw/Trencher; Roller operator (compacting); Screed operator

(asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck

GROUP 5: Equipment Greaser (Grease Truck/Multi Shift).

GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete

Amendment 0003 planer operator; Dandy digger; Deck engine operator;

Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types

- Watson 1000 auger or similar types - Texoma 330, 500 or

600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator; Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type; Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system

(below ground); Pavement breaker operator (truck mounted);

Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including 25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator

(crawler and wheel type, over 3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms);

Tractor operator-bulldozer, tamper-scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator

GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene

Amendment 0003 or similar type); Asphalt-rubber distribution operator;

Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar; Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled); Concrete mixer operator (paving); Crushing plant operator; Drill Doctor;

Drilling machine operator, Bucket or auger types (Calweld

150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types -drilling depth of 60' maximum); Elevating grader operator;

Grade checker; Gradall operator; Grouting machine operator;

Heavy-duty repairman; Heavy equipment robotics operator;

Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type);

Pumpcrete gun operator; Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu.

yds. struck); Rubber-tired earth-moving equipment operator

(multiple engine up to and including 25 yds. struck);

Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self-propelled curb and gutter machine operator; Shuttle buggy;

Amendment 0003

Skiploader operator (crawler and wheel type over 1-1/2 yds.

up to and including 6-1/2 yds.); Soil remediation plant operator; Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator

(any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;

Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull

(compaction) operator

GROUP 9: Heavy Duty Repairman

GROUP 10: Drilling machine operator, Bucket or auger types

(Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;

Rubber-tired earth-moving equipment operator (single

Amendment 0003 engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar

Pugmill equipment)

GROUP 11: Heavy Duty Repairman - Welder Combination, Welder -

Certified.

GROUP 12: Auto grader operator; Automatic slip form operator;

Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.

yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);

Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)

GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)

Amendment 0003

GROUP 14: Canal liner operator; Canal trimmer operator;

Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);

Wheel excavator operator (over 750 cu. yds.)

GROUP 15: Rubber-tired earth-moving equipment operator, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)

GROUP 16: Rubber-tired earth-moving equipment operator, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system

(multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);

Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)

GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar

Amendment 0003 types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)

GROUP 19: Rotex concrete belt operator (or similar types);

Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50

cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)

GROUP 20: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem

(scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 21: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over

50 cu. yds. struck)

GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system

(single engine, up to and including 25 yds. struck)

GROUP 23: Rubber-tired earth-moving equipment operator, (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)

GROUP 24: Rubber-tired earth-moving equipment operator, (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.

struck)

GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

CRANES, PILEDRIVING AND HOISTING EQUIPMENT CLASSIFICATIONS

GROUP 1: Engineer oiler; Fork lift operator (includes loed, lull or similar types)

GROUP 2: Truck crane oiler

GROUP 3: A-frame or winch truck operator; Ross carrier operator (jobsite)

GROUP 4: Bridge-type unloader and turntable operator;

Helicopter hoist operator

GROUP 5: Hydraulic boom truck; Stinger crane (Austin-Western or similar type); Tugger hoist operator (1 drum)

GROUP 6: Bridge crane operator; Cretor crane operator; Hoist operator (Chicago boom and similar type); Lift mobile operator; Lift slab machine operator (Vagtborg and similar types); Material hoist and/or manlift operator; Polar gantry crane operator; Self Climbing scaffold (or similar type); Shovel, backhoe, dragline, clamshell operator (over

3/4 yd. and up to 5 cu. yds. mrc); Tugger hoist operator

GROUP 7: Pedestal crane operator; Shovel, backhoe, dragline, clamshell operator (over 5 cu. yds. mrc); Tower crane repair; Tugger hoist operator (3 drum)

Amendment 0003

GROUP 8: Crane operator (up to and including 25 ton capacity); Crawler transporter operator; Derrick barge operator (up to and including 25 ton capacity); Hoist operator, stiff legs, Guy derrick or similar type (up to and including 25 ton capacity); Shovel, backhoe, dragline, clamshell operator (over 7 cu. yds., M.R.C.)

GROUP 9: Crane operator (over 25 tons and up to and including

50 tons mrc); Derrick barge operator (over 25 tons up to and including 50 tons mrc); Highline cableway operator;

Hoist operator, stiff legs, Guy derrick or similar type

(over 25 tons up to and including 50 tons mrc); K-crane operator; Polar crane operator; Self erecting tower crane operator maximum lifting capacity ten tons

GROUP 10: Crane operator (over 50 tons and up to and including 100 tons mrc); Derrick barge operator (over 50 tons up to and including 100 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 50 tons up to and including 100 tons mrc), Mobile tower crane operator

(over 50 tons, up to and including 100 tons M.R.C.); Tower crane operator and tower gantry

GROUP 11: Crane operator (over 100 tons and up to and including 200 tons mrc); Derrick barge operator (over 100 tons up to and including 200 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 100 tons up to and including 200 tons mrc); Mobile tower crane operator

(over 100 tons up to and including 200 tons mrc)

GROUP 12: Crane operator (over 200 tons up to and including

300 tons mrc); Derrick barge operator (over 200 tons up to and including 300 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 200 tons, up to and including 300 tons mrc); Mobile tower crane operator (over

200 tons, up to and including 300 tons mrc)

GROUP 13: Crane operator (over 300 tons); Derrick barge operator (over 300 tons); Helicopter pilot; Hoist operator, stiff legs, Guy derrick or similar type (over 300 tons);

Mobile tower crane operator (over 300 tons)

TUNNEL CLASSIFICATIONS

GROUP 1: Skiploader (wheel type up to 3/4 yd. without attachment)

GROUP 2: Power-driven jumbo form setter operator

GROUP 3: Dinkey locomotive or motorperson (up to and including 10 tons)

GROUP 4: Bit sharpener; Equipment greaser (grease truck);

Slip form pump operator (power-driven hydraulic lifting device for concrete forms); Tugger hoist operator (1 drum);

Tunnel locomotive operator (over 10 and up to and including

30 tons)

GROUP 5: Backhoe operator (up to and including 3/4 yd.);

Small Ford, Case or similar; Drill doctor; Grouting machine operator; Heading shield operator; Heavy-duty repairperson;

Loader operator (Athey, Euclid, Sierra and similar types);

Mucking machine operator (1/4 yd., rubber-tired, rail or track type); Pneumatic concrete placing machine operator

(Hackley-Presswell or similar type); Pneumatic heading shield (tunnel); Pumpcrete gun operator; Tractor compressor drill combination operator; Tugger hoist operator (2 drum);

Tunnel locomotive operator (over 30 tons)

GROUP 6: Heavy Duty Repairman

GROUP 7: Tunnel mole boring machine operator

ENGINEERS ZONES

$1.00 additional per hour for all of IMPERIAL County and the portions of KERN, RIVERSIDE & SAN BERNARDINO Counties as defined below:

That area within the following Boundary: Begin in San

Bernardino County, approximately 3 miles NE of the intersection of I-15 and the California State line at that point which is the NW corner of Section 1, T17N,m R14E, San Bernardino

Meridian. Continue W in a straight line to that point which is

Amendment 0003 the SW corner of the northwest quarter of Section 6, T27S, R42E, Mt. Diablo Meridian. Continue North to the intersection with the Inyo County Boundary at that point which is the NE corner of the western half of the northern quarter of Section

6, T25S, R42E, MDM. Continue W along the Inyo and San

Bernardino County boundary until the intersection with Kern

County, as that point which is the SE corner of Section 34, T24S, R40E, MDM. Continue W along the Inyo and Kern County boundary until the intersection with Tulare County, at that point which is the SW corner of the SE quarter of Section 32, T24S, R37E, MDM. Continue W along the Kern and Tulare County boundary, until that point which is the NW corner of T25S, R32E, MDM. Continue S following R32E lines to the NW corner of

T31S, R32E, MDM. Continue W to the NW corner of T31S, R31E, MDM. Continue S to the SW corner of T32S, R31E, MDM. Continue

W to SW corner of SE quarter of Section 34, T32S, R30E, MDM.

Continue S to SW corner of T11N, R17W, SBM. Continue E along south boundary of T11N, SBM to SW corner of T11N, R7W, SBM.

Continue S to SW corner of T9N, R7W, SBM. Continue E along south boundary of T9N, SBM to SW corner of T9N, R1E, SBM.

Continue S along west boundary of R1E, SMB to Riverside County line at the SW corner of T1S, R1E, SBM. Continue E along south boundary of T1s, SBM (Riverside County Line) to SW corner of

T1S, R10E, SBM. Continue S along west boundary of R10E, SBM to

Imperial County line at the SW corner of T8S, R10E, SBM.

Continue W along Imperial and Riverside county line to NW corner of T9S, R9E, SBM. Continue S along the boundary between

Imperial and San Diego Counties, along the west edge of R9E, Amendment 0003

SBM to the south boundary of Imperial County/California state line. Follow the California state line west to Arizona state line, then north to Nevada state line, then continuing NW back to start at the point which is the NW corner of Section 1, T17N, R14E, SBM

$1.00 additional per hour for portions of SAN LUIS OBISPO, KERN, SANTA BARBARA & VENTURA as defined below:

That area within the following Boundary: Begin approximately 5 miles north of the community of Cholame, on the Monterey County and San Luis Obispo County boundary at the NW corner of T25S, R16E, Mt. Diablo Meridian. Continue south along the west side of R16E to the SW corner of T30S, R16E, MDM. Continue E to SW corner of T30S, R17E, MDM. Continue S to SW corner of T31S, R17E, MDM. Continue E to SW corner of T31S, R18E, MDM.

Continue S along West side of R18E, MDM as it crosses into San

Bernardino Meridian numbering area and becomes R30W. Follow the west side of R30W, SBM to the SW corner of T9N, R30W, SBM.

Continue E along the south edge of T9N, SBM to the Santa

Barbara County and Ventura County boundary at that point whch is the SW corner of Section 34.T9N, R24W, SBM, continue S along the Ventura County line to that point which is the SW corner of the SE quarter of Section 32, T7N, R24W, SBM. Continue E along the south edge of T7N, SBM to the SE corner to T7N, R21W, SBM. Continue N along East side of R21W, SBM to Ventura County and Kern County boundary at the NE corner of T8N, R21W.

Continue W along the Ventura County and Kern County boundary to

Amendment 0003 the SE corner of T9N, R21W. Continue North along the East edge of R21W, SBM to the NE corner of T12N, R21W, SBM. Continue

West along the north edge of T12N, SBM to the SE corner of

T32S, R21E, MDM. [T12N SBM is a think strip between T11N SBM and T32S MDM]. Continue North along the East side of R21E, MDM to the Kings County and Kern County border at the NE corner of

T25S, R21E, MDM, continue West along the Kings County and Kern

County Boundary until the intersection of San Luis Obispo

County. Continue west along the Kings County and San Luis

Obispo County boundary until the intersection with Monterey

County. Continue West along the Monterey County and San Luis

Obispo County boundary to the beginning point at the NW corner of T25S, R16E, MDM.

$2.00 additional per hour for INYO and MONO Counties and the

Northern portion of SAN BERNARDINO County as defined below:

That area within the following Boundary: Begin at the intersection of the northern boundary of Mono County and the

California state line at the point which is the center of

Section 17, T10N, R22E, Mt. Diablo Meridian. Continue S then

SE along the entire western boundary of Mono County, until it reaches Inyo County at the point which is the NE corner of the

Western half of the NW quarter of Section 2, T8S, R29E, MDM.

Continue SSE along the entire western boundary of Inyo County, until the intersection with Kern County at the point which is the SW corner of the SE 1/4 of Section 32, T24S, R37E, MDM.

Amendment 0003

Continue E along the Inyo and Kern County boundary until the intersection with San Bernardino County at that point which is the SE corner of section 34, T24S, R40E, MDM. Continue E along the Inyo and San Bernardino County boundary until the point which is the NE corner of the Western half of the NW quarter of

Section 6, T25S, R42E, MDM. Continue S to that point which is the SW corner of the NW quarter of Section 6, T27S, R42E, MDM.

Continue E in a straight line to the California and Nevada state border at the point which is the NW corner of Section 1, T17N, R14E, San Bernardino Meridian. Then continue NW along the state line to the starting point, which is the center of

Section 18, T10N, R22E, MDM.

REMAINING AREA NOT DEFINED ABOVE RECIEVES BASE RATE

ENGI0012-004 08/01/2020

OPERATOR: Power Equipment

(DREDGING)

(1) Leverman................$ 56.40 30.00

(2) Dredge dozer............$ 50.43 30.00

(3) Deckmate................$ 50.32 30.00

(4) Winch operator (stern winch on dredge)............$ 49.77 30.00

Amendment 0003

(5) Fireman-Oiler, Deckhand, Bargeman, Leveehand...................$ 49.23 30.00

(6) Barge Mate..............$ 49.84 30.00

IRON0433-006 07/01/2020

IRONWORKER

Fence Erector...............$ 34.58 24.81

Ornamental, Reinforcing and Structural..............$ 41.00 33.45

PREMIUM PAY:

$6.00 additional per hour at the following locations:

China Lake Naval Test Station, Chocolate Mountains Naval

Reserve-Niland, Edwards AFB, Fort Irwin Military Station, Fort Irwin Training

Center-Goldstone, San Clemente Island, San Nicholas Island, Susanville Federal Prison, 29 Palms - Marine Corps, U.S. Marine

Base - Barstow, U.S. Naval Air Facility - Sealey, Vandenberg AFB

$4.00 additional per hour at the following locations:

Army Defense Language Institute - Monterey, Fallon Air Base, Amendment 0003

Naval Post Graduate School - Monterey, Yermo Marine Corps

Logistics Center

$2.00 additional per hour at the following locations:

Port Hueneme, Port Mugu, U.S. Coast Guard Station - Two Rock

LABO0300-005 03/01/2021

Asbestos Removal Laborer.........$ 37.49 21.88

SCOPE OF WORK: Includes site mobilization, initial site cleanup, site preparation, removal of asbestos-containing material and toxic waste, encapsulation, enclosure and disposal of asbestos- containing materials and toxic waste by hand or with equipment or machinery; scaffolding, fabrication of temporary wooden barriers and assembly of decontamination stations.

LABO0345-001 07/01/2021

Amendment 0003

LABORER (GUNITE)

GROUP 1.....................$ 46.50 20.42

GROUP 2.....................$ 45.55 20.42

GROUP 3.....................$ 42.01 20.42

FOOTNOTE: GUNITE PREMIUM PAY: Workers working from a

Bosn'n's Chair or suspended from a rope or cable shall receive 40 cents per hour above the foregoing applicable classification rates. Workers doing gunite and/or shotcrete work in a tunnel shall receive 35 cents per hour above the foregoing applicable classification rates, paid on a portal-to-portal basis. Any work performed on, in or above any smoke stack, silo, storage elevator or similar type of structure, when such structure is in excess of

75'-0"" above base level and which work must be performed in whole or in part more than 75'-0"" above base level, that work performed above the 75'-0"" level shall be compensated for at 35 cents per hour above the applicable classification wage rate.

GUNITE LABORER CLASSIFICATIONS

GROUP 1: Rodmen, Nozzlemen

GROUP 2: Gunmen

GROUP 3: Reboundmen

Amendment 0003

LABO1184-001 07/01/2021

Laborers: (HORIZONTAL

DIRECTIONAL DRILLING)

(1) Drilling Crew Laborer...$ 38.89 17.10

(2) Vehicle Operator/Hauler.$ 39.06 17.10

(3) Horizontal Directional

Drill Operator..............$ 40.91 17.10

(4) Electronic Tracking

Locator.....................$ 42.91 17.10

Laborers: (STRIPING/SLURRY

SEAL)

GROUP 1.....................$ 40.10 20.12

GROUP 2.....................$ 41.40 20.12

GROUP 3.....................$ 43.41 20.12

GROUP 4.....................$ 45.15 20.12

LABORERS - STRIPING CLASSIFICATIONS

GROUP 1: Protective coating, pavement sealing, including repair and filling of cracks by any method on any surface in parking lots, game courts and playgrounds; carstops;

operation of all related machinery and equipment; equipment repair technician

Amendment 0003

GROUP 2: Traffic surface abrasive blaster; pot tender -removal of all traffic lines and markings by any method

(sandblasting, waterblasting, grinding, etc.) and preparation of surface for coatings. Traffic control person: controlling and directing traffic through both conventional and moving lane closures; operation of all related machinery and equipment

GROUP 3: Traffic delineating device applicator: Layout and application of pavement markers, delineating signs, rumble and traffic bars, adhesives, guide markers, other traffic delineating devices including traffic control. This category includes all traffic related surface preparation

(sandblasting, waterblasting, grinding) as part of the application process. Traffic protective delineating system installer: removes, relocates, installs, permanently affixed roadside and parking delineation barricades, fencing, cable anchor, guard rail, reference signs, monument markers; operation of all related machinery and equipment; power broom sweeper

GROUP 4: Striper: layout and application of traffic stripes and markings; hot thermo plastic; tape traffic stripes and markings, including traffic control; operation of all related machinery and equipment

LABO1184-002 07/01/2020

LABORER (TUNNEL)

GROUP 1.....................$ 42.54 21.04

GROUP 2.....................$ 42.86 21.04

GROUP 3.....................$ 43.32 21.04

GROUP 4.....................$ 44.01 21.04

LABORER

GROUP 1.....................$ 36.39 21.04

GROUP 2.....................$ 36.94 21.04

GROUP 3.....................$ 37.49 21.04

GROUP 4.....................$ 39.04 21.04

GROUP 5.....................$ 39.39 21.04

LABORER CLASSIFICATIONS

GROUP 1: Cleaning and handling of panel forms; Concrete screeding for rough strike-off; Concrete, water curing;

Demolition laborer, the cleaning of brick if performed by a worker performing any other phase of demolition work, and the cleaning of lumber; Fire watcher, limber, brush loader, piler and debris handler; Flag person; Gas, oil and/or water pipeline laborer; Laborer, asphalt-rubber material loader; Laborer, general or construction; Laborer, general clean-up; Laborer, landscaping; Laborer, jetting; Laborer, temporary water and air lines; Material hose operator

(walls, slabs, floors and decks); Plugging, filling of shee

Amendment 0003 bolt holes; Dry packing of concrete; Railroad maintenance, repair track person and road beds; Streetcar and railroad construction track laborers; Rigging and signaling; Scaler;

Slip form raiser; Tar and mortar; Tool crib or tool house laborer; Traffic control by any method; Window cleaner;

Wire mesh pulling - all concrete pouring operations

GROUP 2: Asphalt shoveler; Cement…