17R0051_WR_Deep_Cutoff.pdf

The w ork consistis of a deep cutoff w all in the Wood River Levee Disctrict and includes environmental protection, site demolition, restoration, geotechnical instrumentation, engineering fabric, stripping, care of w ater, earthw ork, cement-bentonite slurry trench cutoff w all construction and establishment of turf.

The project magnitude is betw een $10,000,000 - $25,000,000.

Site visit w ill be on 25 July at 0900. Offerors are to meet at Mel-Price Lock and Dam Conference Room.

THIS REQUIREMENT WILL BE UNRESTRICTED.

KRISTINA J BAKER 314 331-8506

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

12-Jul-2017

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________270 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________4 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________ (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, X is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______60 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

CONTRACTING DIVISION

US ARMY ENGR DIST ST LOUIS

1222 SPRUCE STREET, RM 4.207

ST LOUIS MO 63103-2833

W912P9

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

(hour) Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

314 331-8746FAX:TEL: TEL: FAX:

W912P917R0051 70

1:00PM

11 Aug 2017

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

SCHEDULE

Item Estimated Unit total

00 00 10-3

Section 00 10 00 - Solicitation

BID SCHEDULE

Deep Cutoff Wall Stationing 0+00 to 10+00

0001. Mobilization and Demobilization 1 JOB _ ___ ________

0002. Bonds 1 JOB _ ___ ________

0003. Stripping 1 JOB _ ___ ________

0004. Clearing 1 JOB _ ___ ________

0005. Establishment of Turf 1 JOB _ ___ ________

0006. Site Demolition and 1 JOB _ ___ ________ Restoration

0007. Work Platform 1 JOB _ ___ ________

0008. Cement Bentonite Slurry Trench Cutoff Wall(0–80) ft 78,900 SF _ ___ ________

0009. Cement Bentonite Slurry Trench Cutoff Wall (80+) ft

a. First 41,200 square ft 41,200 SF _ ___ ________

b. All over 41,200 square ft 13,700 SF _ ___ ________

0010. Cement Bentonite Slurry Trench Cutoff Wall (ROCK)

a. First 1000 square ft 1000 SF _ ___ ________

b. All over 1000 square ft 1000 SF _ ___ ________

0011. Impervious Clay Fill

a. First 1050 cubic yards 1050 CY _____ ________

b. All over 1050 cubic yards 350 CY _____ ________

0012. Offsite Borrow

a. First 200 cubic yards 200 CY _____ ________

b. All over 200 cubic yards 200 CY _____ ________

0013. Offsite Material Disposal 1 JOB _ ___ ________

0014. Onsite Material Disposal

a. First 7500 cubic yards 7500 CY _____ ________

b. All over 7500 cubic yards 1000 CY _____ ________

0015. Environmental Protection 1 JOB _ ___ ________

0016. Slurry Wall Panel Coring

a. First 800 linear ft 800 LF _____ ________

b. All over 800 linear ft 300 LF _ ___ ________

00 00 10-4

0017. Geotechnical Instrumentation 1 JOB _ ___ ________ Installation

0018. Monthly Instrumentation Monitoring 1 EA _ ___ ________

TOTAL $ ________

OPTIONAL BID ITEMS:

Deep Cutoff Wall Stations 10+00 to 18+60

1001. Mobilization and Demobilization 1 JOB _ ___ ________

1002. Stripping 1 JOB _ ___ ________

1003. Establishment of Turf 1 JOB _ ___ ________

1004. Site Demolition and 1 JOB _ ___ ________ Restoration

1005. Work Platform 1 JOB _ ___ ________

1006. Cement Bentonite Slurry Trench Cutoff Wall(0–80) ft 67,100 SF _ ___ ________

1007. Cement Bentonite Slurry Trench Cutoff Wall (80+) ft

a. First 41,200 square ft 41,200 SF _ ___ ________

b. All over 41,200 square ft 13,700 SF _ ___ ________

1008. Cement Bentonite Slurry Trench Cutoff Wall (ROCK)

a. First 860 square ft 860 SF _ ___ ________

b. All over 860 square ft 860 SF _ ___ ________

1009. Ramp Replacement 1 JOB _ ___ ________

1010. Impervious Clay Fill

a. First 1300 cubic yards 1300 CY _____ ________

b. All over 1300 cubic yards 450 CY _____ ________

1011. Offsite Borrow

a. First 700 cubic yards 700 CY _____ ________

b. All over 700 cubic yards 700 CY _____ ________

00 00 10-5

1012. Offsite Material Disposal 1 JOB _ ___ ________

1013. Environmental Protection 1 JOB _ ___ ________

1014. Slurry Wall Panel Coring

a. First 650 linear ft 650 LF _____ ________

b. All over 650 linear ft 250 LF _ ___ ________

1015. Geotechnical Instrumentation 1 JOB _ ___ ________ Installation

1016. Monthly Instrumentation Monitoring 1 EA _ ___ ________

TOTAL $ ________

W912P917R0051

ABBREVIATIONS

EA Each JOB Job LF Linear Feet SF Square Feet CY Cubic Yards

SCHEDULE NOTES

1. All quantities shown on the SCHEDULE are estimated quantities except when the unit is shown as job "JOB".

2. When proposals are solicited on a unit price basis, bidders shall insert in the spaces provided therefor in the SCHEDULE both the "unit price" and the "estimated amount" resulting from applying the said unit price to the estimated quantity shown. In event the bidder quotes only a total price ("estimated amount") in its bid and fails to quote the unit price, the Government will determine such unit price by dividing the total price quoted by the quantity of the item set out in the SCHEDULE. The bidder agrees that the unit price so determined shall be used for the purpose of bid evaluation, award and all payments to the Contractor including final payment.

3. All extensions of the unit prices shown will be subject to verification by the Government. In case of variation between the unit price and the extension, the unit price will be considered to be the proposal and the extension will be corrected accordingly.

4. If a modification to a bid based on unit prices is submitted, which provides for a lump sum adjustment to the total estimated cost, the application of the lump sum adjustment to each unit price in the bid schedule must be stated. If it is not stated, the bidder agrees that the lump sum adjustment shall be applied on a pro rata basis to every unit price in the bid schedule.

5. Bidders are required to propose all items listed on the Schedule in addition to inserting a total quoted bid in the appropriate space provided.

Failure to do so will be considered good cause to disqualify the bid.

6. Bidders are encouraged to pay particular attention to the requirements on lab “validation” in Section 01 14 40 of the contract specifications.

7. EVALUATION OF SUBDIVIDED ITEMS (MAR 1995) UAI 52.211-5001

Item Nos. 0009, 0010, 0011, 0012, 0014, 0016, 1007, 1008, 1010, 1011, and 1014 are subdivided into two or more estimated quantities and are to be separately priced. The Government will evaluate each of these items on the basis of total price of its sub-items.

8. VARIATIONS IN ESTIMATED QUANTITIES - SUBDIVIDED ITEMS. UAI 52.211-

5001. This variations in estimated quantities clause is applicable only to Item Nos. 0009, 0010, 0011, 0012, 0014, 0016, 1007, 1008, 1010, 1011, and 1014.

(a) Variation from the estimated quantity in the actual work performed under any second or subsequent subitem or elimination of all work under such a second or subsequent subitem will not be the basis for an adjustment in contract unit price.

(b) Where the actual quantity of work performed for Item Nos.

0009, 0010, 0011, 0012, 0014, 0016, 1007, 1008, 1010, 1011, and 1014 is less than 85 percent of the quantity of the first subitem listed under such item, the Contractor will be paid at the contract unit price for that subitem for the actual quantity of work performed, and, in addition, an equitable adjustment shall be made in accordance with the Contract Clause FAR 52.212- 11, Variation in Estimated Quantities.

(c) If the actual quantity of work performed under Item Nos. 0009, 0010, 0011, 0012, 0014, 0016, 1007, 1008, 1010, 1011, and 1014 exceeds 115 percent or is less than 85 percent of the total estimated quantity of the subitems under that item, and/or if the quantity of work performed under the second subitem or any subsequent subitem under Item Nos. 0009, 0010, 0011, 0012, 0014, 0016, 1007, 1008, 1010, 1011, and 1014 exceeds 115 percent or is less than 85 percent of the estimated quantity of any such subitem, and if such variation causes an increase or a decrease in the time required for performance of this contract, the contract completion time will be adjusted in accordance with the Contract Clause FAR 52.211-18, Variation in Estimated Quantities.

9. OPTIONAL BID ITEMS.

Bid Item Nos. 1001-1016 are OPTIONAL ITEMS. Upon the review of inspection at the site, the Contracting Officer, in accordance with the specifications and drawings, will direct the optional bid item work as needed. The Contractor shall perform the appropriate work ONLY when directed by the Contracting Officer. The Government is not obligated to request any work under any optional item(s). The bid prices for each optional item shall represent your firm price to perform that service. Payment will be made ONLY for work actually requested and performed to the Government’s satisfaction.

The work pertaining to OPTIONAL ITEMS 1001 – 1016 shall be priced, however funding and actual work may be delayed until February 2020.

INSURANCE

REQUIRED INSURANCE

(a) As required by the Contract Clause entitled "Insurance—Work on a Government Installation", the Contractor shall furnish to the Contracting Officer, prior to the commencement of work, a certificate or written statement as evidence of the minimum insurance listed below. The Contractor shall procure and maintain such types and amounts of insurance during the entire period of his performance under this contract. The Contractor shall assure that the certificate or written statement is in accordance with required wording indicated in paragraph b of the aforementioned Contract Clause.

(1) Workmen's Compensation – Amounts required by applicable jurisdictional statutes.

(2) Employer's Liability Insurance – $100,000.00

(3) Comprehensive General Liability Insurance – (No property damage liability insurance is required.)

Bodily Injury — $500,000 per occurrence

(4) Comprehensive Automobile Insurance –

Bodily Injury — $200,000 each person $500,000 each accident Property Damage — $ 20,000 each accident

(b) Certificates of insurance should be submitted to the following address:

Department of the Army St. Louis District, Corps of Engineers 1222 Spruce Street St Louis, Mo 63103

(End of clause)

FINANCIAL DATA FORM

FINANCIAL DATA FORM

U. S. Army Corps of Engineering St. Louis District, 1222 Spruce Street, St. Louis, Mo. 63103-2833

THE OFFEROR SHALL PROVIDE THE INFORMATION BELOW TO ASSIST THE GOVERNMENT IN

DETERMINING THE OFFEROR’S FINANCIAL ABILITY TO PERFORM THE CONTRACT.

BANK OR FINANCIAL INSTITUTION

Name, Address and Telephone No.

POINT OF CONTACT

Name and Title

TELEPHONE NO.

FAX NO.

E-MAIL ADDRESS

CONTRACTOR’S SIGNATURE

APPROVAL:_______________________________________________

TITLE: ________________________________________________

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Deep Cutoff Wall

FFP

FOB: Destination

SIGNAL CODE: A

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job OPTION Deep Cutoff Wall - Option

FFP

FOB: Destination

NET AMT

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 N/A N/A N/A N/A

0002 N/A N/A N/A N/A

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2016 52.215-1 Instructions to Offerors--Competitive Acquisition JAN 2017 52.236-28 Preparation of Proposals--Construction OCT 1997

CLAUSES INCORPORATED BY FULL TEXT

52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates award of a Firm Fixed Priced contract resulting from this solicitation.

(End of provision)

52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) Site visit will be on 25 July at 0900. Offerors are to meet at Mel-Price Lock and Dam Conference Room.

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Farsite.hill.af.mil

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Farsite.hill.af.mil

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any Defense Federal Acquisition Regulation (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

Section 00 45 00 - Representations and Certifications

CLAUSES INCORPORATED BY REFERENCE

52.203-11 Certification And Disclosure Regarding Payments To

Influence Certain Federal Transactions

SEP 2007

52.204-13 System for Award Management Maintenance OCT 2016 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-17 Ownership or Control of Offeror JUL 2016 52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013 52.222-38 Compliance With Veterans' Employment Reporting

Requirements

FEB 2016

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.247-7022 Representation Of Extent Of Transportation Of Supplies By

Sea

AUG 1992

CLAUSES INCORPORATED BY FULL TEXT

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number .

(Contractor to sign and date and insert authorized signer's name and title).

52.222-22 PREVIOUS CONTRACTS AND COMPLIANCE REPORTS (FEB 1999)

The offeror represents that --

(a) ( ) It has, ( ) has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation;

(b) ( ) It has, ( ) has not, filed all required compliance reports; and

(c) Representations indicating submission of required compliance reports, signed by proposed subcontractors, will be obtained before subcontract awards.

52.222-25 AFFIRMATIVE ACTION COMPLIANCE (APR 1984)

The offeror represents that

(a) [ ] it has developed and has on file, [ ] has not developed and does not have on file, at each establishment, affirmative action programs required by the rules and regulations of the Secretary of Labor (41 CFR 60-1 and 60-2), or

(b) [ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

252.225-7000 BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE--BASIC (NOV

2014)

(a) Definitions. Commercially available off-the-shelf (COTS) item, component, domestic end product, foreign end product, qualifying country, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision, have the meanings given in the Buy American and Balance of Payments Program--Basic clause of this solicitation.

(b) Evaluation. The Government--

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program-- Basic clause of this solicitation, the offeror certifies that--

(i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The offeror certifies that the following end products are qualifying country end products:

___ (Line Item Number Country of Origin)

___ (Country of Origin)

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'':

(Line Item Number) ___

(Country of Origin (If known)) ___

252.225-7020 TRADE AGREEMENTS CERTIFICATE--BASIC (NOV 2014)

(a) Definitions. Designated country end product, nondesignated country end product, qualifying country end product, and U.S.-made end product, as used in this provision have the meanings given in the Trade Agreements-- Basic clause of this solicitation.

(b) Evaluation. The Government--

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will consider only offers of end products that are U.S.-made, qualifying country, or designated country end products unless--

(i) There are no offers of such end products;

(ii) The offers of such end products are insufficient to fulfill the Government's requirements; or

(iii) A national interest waiver has been granted.

(c) Certification and identification of country of origin.

(1) For all line items subject to the Trade Agreements--Basic of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2) of this provision, is a U.S.-made, qualifying country, or designated country end product.

(2) The following supplies are other nondesignated country end products:

(Line Item Number ___ ) (Country of Origin ___ )

252.225-7035 BUY AMERICAN--FREE TRADE AGREEMENT --BALANCE OF PAYMENTS PROGRAM

CERTIFICATE--BASIC (NOV 2014)

(a) Definitions. ``Bahrainian end product,'' ``commercially available off-the-shelf (COTS) item,'' ``component,'' ``domestic end product,'' ``Free Trade Agreement country,'' ``Free Trade Agreement country end product,'' ``foreign end product,'' ``Moroccan end product,'' ``Panamanian end product,'' ``Peruvian end product,'' ``qualifying country end product,'' and ``United States,'' as used in this provision, have the meanings given in the Buy American--Free Trade Agreements--Balance of Payments Program--Basic clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to Buy American--Free Trade Agreements--Balance of Payments Program--

Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American--Free Trade Agreements--Balance of Payments Program—Basic clause of this solicitation, the offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

and

(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The offeror shall identify all end products that are not domestic end products.

(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:

(Line Item Number) (Country of Origin)

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products or Peruvian end products:

(Line Item Number) (Country of Origin)

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'':

(Line Item Number) (Country of Origin (If known))

Section 00 70 00 - Conditions of the Contract

WAGE RATES

WD 15-5075 (Rev.-4) was first posted on www.wdol.gov on 03/21/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5075 Daniel W. Simms Division of | Revision No.: 4 Director Wage Determinations| Date Of Revision: 03/14/2017 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: Illinois, Missouri

Area: Illinois Counties of Bond, Calhoun, Clinton, Jersey, Madison, Monroe, St Clair Missouri Counties of Franklin, Jefferson, Lincoln, St Charles, St Louis, St Louis City, Warren **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.64 01012 - Accounting Clerk II 16.44 01013 - Accounting Clerk III 18.57 01020 - Administrative Assistant 24.14 01035 - Court Reporter 23.06 01041 - Customer Service Representative I 13.20 01042 - Customer Service Representative II 14.84 01043 - Customer Service Representative III 16.19 01051 - Data Entry Operator I 12.47 01052 - Data Entry Operator II 14.40 01060 - Dispatcher, Motor Vehicle 19.05 01070 - Document Preparation Clerk 14.53 01090 - Duplicating Machine Operator 14.53 01111 - General Clerk I 12.33 01112 - General Clerk II 15.00 01113 - General Clerk III 17.07 01120 - Housing Referral Assistant 20.96 01141 - Messenger Courier 12.94 01191 - Order Clerk I 15.72 01192 - Order Clerk II 17.16 01261 - Personnel Assistant (Employment) I 16.33 01262 - Personnel Assistant (Employment) II 19.05 01263 - Personnel Assistant (Employment) III 20.73 01270 - Production Control Clerk 25.08 01290 - Rental Clerk 16.06 01300 - Scheduler, Maintenance 15.96 01311 - Secretary I 15.96 01312 - Secretary II 17.85 01313 - Secretary III 20.96 01320 - Service Order Dispatcher 18.12 01410 - Supply Technician 24.14 01420 - Survey Worker 19.05

01460 - Switchboard Operator/Receptionist 15.10 01531 - Travel Clerk I 12.71 01532 - Travel Clerk II 13.72 01533 - Travel Clerk III 14.74 01611 - Word Processor I 13.51 01612 - Word Processor II 16.06 01613 - Word Processor III 19.05 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.80 05010 - Automotive Electrician 20.59 05040 - Automotive Glass Installer 19.74 05070 - Automotive Worker 19.74 05110 - Mobile Equipment Servicer 18.01 05130 - Motor Equipment Metal Mechanic 21.46 05160 - Motor Equipment Metal Worker 19.74 05190 - Motor Vehicle Mechanic 20.87 05220 - Motor Vehicle Mechanic Helper 16.72 05250 - Motor Vehicle Upholstery Worker 18.88 05280 - Motor Vehicle Wrecker 19.74 05310 - Painter, Automotive 20.59 05340 - Radiator Repair Specialist 19.74 05370 - Tire Repairer 15.80 05400 - Transmission Repair Specialist 21.46 07000 - Food Preparation And Service Occupations 07010 - Baker 12.77 07041 - Cook I 11.02 07042 - Cook II 12.66 07070 - Dishwasher 8.96 07130 - Food Service Worker 10.05 07210 - Meat Cutter 16.34 07260 - Waiter/Waitress 8.85 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.56 09040 - Furniture Handler 14.00 09080 - Furniture Refinisher 20.56 09090 - Furniture Refinisher Helper 16.55 09110 - Furniture Repairer, Minor 18.84 09130 - Upholsterer 22.61 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 11.74 11060 - Elevator Operator 11.10 11090 - Gardener 16.72 11122 - Housekeeping Aide 11.46 11150 - Janitor 11.46 11210 - Laborer, Grounds Maintenance 12.55 11240 - Maid or Houseman 9.81 11260 - Pruner 11.10 11270 - Tractor Operator 15.25 11330 - Trail Maintenance Worker 12.55 11360 - Window Cleaner 13.02 12000 - Health Occupations 12010 - Ambulance Driver 19.90 12011 - Breath Alcohol Technician 18.27 12012 - Certified Occupational Therapist Assistant 25.94 12015 - Certified Physical Therapist Assistant 24.04 12020 - Dental Assistant 16.87 12025 - Dental Hygienist 32.12 12030 - EKG Technician 22.64 12035 - Electroneurodiagnostic Technologist 22.64 12040 - Emergency Medical Technician 19.90 12071 - Licensed Practical Nurse I 16.33 12072 - Licensed Practical Nurse II 18.27 12073 - Licensed Practical Nurse III 20.37 12100 - Medical Assistant 13.74 12130 - Medical Laboratory Technician 17.14 12160 - Medical Record Clerk 17.52 12190 - Medical Record Technician 19.15 12195 - Medical Transcriptionist 18.34 12210 - Nuclear Medicine Technologist 33.77 12221 - Nursing Assistant I 11.38

12222 - Nursing Assistant II 12.80 12223 - Nursing Assistant III 13.96 12224 - Nursing Assistant IV 15.68 12235 - Optical Dispenser 16.07 12236 - Optical Technician 15.99 12250 - Pharmacy Technician 15.52 12280 - Phlebotomist 15.23 12305 - Radiologic Technologist 25.09 12311 - Registered Nurse I 26.36 12312 - Registered Nurse II 29.18 12313 - Registered Nurse II, Specialist 29.18 12314 - Registered Nurse III 35.30 12315 - Registered Nurse III, Anesthetist 35.30 12316 - Registered Nurse IV 42.33 12317 - Scheduler (Drug and Alcohol Testing) 22.63 12320 - Substance Abuse Treatment Counselor 18.12 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.14 13012 - Exhibits Specialist II 24.96 13013 - Exhibits Specialist III 30.54 13041 - Illustrator I 20.80 13042 - Illustrator II 25.56 13043 - Illustrator III 30.15 13047 - Librarian 26.88 13050 - Library Aide/Clerk 12.34 13054 - Library Information Technology Systems 24.27 Administrator 13058 - Library Technician 16.07 13061 - Media Specialist I 17.52 13062 - Media Specialist II 19.59 13063 - Media Specialist III 21.85 13071 - Photographer I 16.71 13072 - Photographer II 18.69 13073 - Photographer III 23.16 13074 - Photographer IV 27.91 13075 - Photographer V 33.77 13090 - Technical Order Library Clerk 15.84 13110 - Video Teleconference Technician 19.55 14000 - Information Technology Occupations 14041 - Computer Operator I 17.04 14042 - Computer Operator II 19.06 14043 - Computer Operator III 21.26 14044 - Computer Operator IV 23.61 14045 - Computer Operator V 26.16 14071 - Computer Programmer I (see 1) 24.21 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.26 14160 - Personal Computer Support Technician 26.16 14170 - System Support Specialist 31.59 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 34.92 15020 - Aircrew Training Devices Instructor (Rated) 42.25 15030 - Air Crew Training Devices Instructor (Pilot) 50.64 15050 - Computer Based Training Specialist / Instructor 34.92 15060 - Educational Technologist 28.74 15070 - Flight Instructor (Pilot) 50.64 15080 - Graphic Artist 23.74 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 42.24 15086 - Maintenance Test Pilot, Rotary Wing 42.24 15088 - Non-Maintenance Test/Co-Pilot 42.24 15090 - Technical Instructor 23.29 15095 - Technical Instructor/Course Developer 28.49 15110 - Test Proctor 18.80 15120 - Tutor 18.80 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 10.10 16030 - Counter Attendant 10.10 16040 - Dry Cleaner 12.12 16070 - Finisher, Flatwork, Machine 10.10 16090 - Presser, Hand 10.10 16110 - Presser, Machine, Drycleaning 10.10 16130 - Presser, Machine, Shirts 10.10 16160 - Presser, Machine, Wearing Apparel, Laundry 10.10 16190 - Sewing Machine Operator 12.93 16220 - Tailor 13.75 16250 - Washer, Machine 10.81 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.07 19040 - Tool And Die Maker 26.90 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.14 21030 - Material Coordinator 24.97 21040 - Material Expediter 24.97 21050 - Material Handling Laborer 19.18 21071 - Order Filler 12.91 21080 - Production Line Worker (Food Processing) 19.14 21110 - Shipping Packer 15.93 21130 - Shipping/Receiving Clerk 15.93 21140 - Store Worker I 12.23 21150 - Stock Clerk 18.05 21210 - Tools And Parts Attendant 19.14 21410 - Warehouse Specialist 19.14 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.16 23019 - Aircraft Logs and Records Technician 23.89 23021 - Aircraft Mechanic I 28.08 23022 - Aircraft Mechanic II 29.16 23023 - Aircraft Mechanic III 30.26 23040 - Aircraft Mechanic Helper 21.16 23050 - Aircraft, Painter 26.91 23060 - Aircraft Servicer 23.89 23070 - Aircraft Survival Flight Equipment Technician 26.91 23080 - Aircraft Worker 25.62 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.62 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.08

II

23110 - Appliance Mechanic 24.85 23120 - Bicycle Repairer 15.80 23125 - Cable Splicer 31.96 23130 - Carpenter, Maintenance 27.72 23140 - Carpet Layer 25.67 23160 - Electrician, Maintenance 31.47 23181 - Electronics Technician Maintenance I 25.80 23182 - Electronics Technician Maintenance II 27.09 23183 - Electronics Technician Maintenance III 28.28 23260 - Fabric Worker 22.14 23290 - Fire Alarm System Mechanic 23.21 23310 - Fire Extinguisher Repairer 21.37 23311 - Fuel Distribution System Mechanic 27.30 23312 - Fuel Distribution System Operator 21.67 23370 - General Maintenance Worker 20.67 23380 - Ground Support Equipment Mechanic 28.08 23381 - Ground Support Equipment Servicer 23.89 23382 - Ground Support Equipment Worker 25.62 23391 - Gunsmith I 21.37 23392 - Gunsmith II 24.77 23393 - Gunsmith III 27.15 23410 - Heating, Ventilation And Air-Conditioning 24.36 Mechanic 23411 - Heating, Ventilation And Air Contditioning 25.29 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.35 23440 - Heavy Equipment Operator 30.72 23460 - Instrument Mechanic 25.61

23465 - Laboratory/Shelter Mechanic 26.01 23470 - Laborer 17.17 23510 - Locksmith 22.23 23530 - Machinery Maintenance Mechanic 27.80 23550 - Machinist, Maintenance 24.17 23580 - Maintenance Trades Helper 18.37 23591 - Metrology Technician I 25.61 23592 - Metrology Technician II 26.58 23593 - Metrology Technician III 27.58 23640 - Millwright 27.07 23710 - Office Appliance Repairer 22.23 23760 - Painter, Maintenance 26.94 23790 - Pipefitter, Maintenance 36.44 23810 - Plumber, Maintenance 34.91 23820 - Pneudraulic Systems Mechanic 27.15 23850 - Rigger 27.15 23870 - Scale Mechanic 24.77 23890 - Sheet-Metal Worker, Maintenance 30.10 23910 - Small Engine Mechanic 21.36 23931 - Telecommunications Mechanic I 26.40 23932 - Telecommunications Mechanic II 27.41 23950 - Telephone Lineman 28.50 23960 - Welder, Combination, Maintenance 23.21 23965 - Well Driller 23.29 23970 - Woodcraft Worker 27.15 23980 - Woodworker 21.37 24000 - Personal Needs Occupations 24550 - Case Manager 14.52 24570 - Child Care Attendant 9.61 24580 - Child Care Center Clerk 13.54 24610 - Chore Aide 10.04 24620 - Family Readiness And Support Services 14.52 Coordinator 24630 - Homemaker 14.52 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 31.10 25040 - Sewage Plant Operator 24.16 25070 - Stationary Engineer 31.10 25190 - Ventilation Equipment Tender 20.86 25210 - Water Treatment Plant Operator 24.16 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.22 27007 - Baggage Inspector 12.71 27008 - Corrections Officer 18.82 27010 - Court Security Officer 22.51 27030 - Detection Dog Handler 16.66 27040 - Detention Officer 18.82 27070 - Firefighter 26.33 27101 - Guard I 12.71 27102 - Guard II 16.66 27131 - Police Officer I 22.39 27132 - Police Officer II 24.88 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.57 28042 - Carnival Equipment Repairer 13.58 28043 - Carnival Worker 8.87 28210 - Gate Attendant/Gate Tender 13.47 28310 - Lifeguard 11.59 28350 - Park Attendant (Aide) 15.07 28510 - Recreation Aide/Health Facility Attendant 11.00 28515 - Recreation Specialist 18.05 28630 - Sports Official 12.00 28690 - Swimming Pool Operator 16.53 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.15 29020 - Hatch Tender 27.15 29030 - Line Handler 27.15 29041 - Stevedore I 25.29 29042 - Stevedore II 28.51 30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.04 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.69 30021 - Archeological Technician I 19.36 30022 - Archeological Technician II 21.56 30023 - Archeological Technician III 25.04 30030 - Cartographic Technician 27.52 30040 - Civil Engineering Technician 23.25 30051 - Cryogenic Technician I 23.10 30052 - Cryogenic Technician II 25.51 30061 - Drafter/CAD Operator I 19.36 30062 - Drafter/CAD Operator II 21.56 30063 - Drafter/CAD Operator III 24.15 30064 - Drafter/CAD Operator IV 29.71 30081 - Engineering Technician I 17.67 30082 - Engineering Technician II 19.83 30083 - Engineering Technician III 22.18 30084 - Engineering Technician IV 27.48 30085 - Engineering Technician V 33.62 30086 - Engineering Technician VI 40.68 30090 - Environmental Technician 22.06 30095 - Evidence Control Specialist 20.66 30210 - Laboratory Technician 20.55 30221 - Latent Fingerprint Technician I 24.92 30222 - Latent Fingerprint Technician II 27.52 30240 - Mathematical Technician 26.82 30361 - Paralegal/Legal Assistant I 20.04 30362 - Paralegal/Legal Assistant II 24.86 30363 - Paralegal/Legal Assistant III 30.37 30364 - Paralegal/Legal Assistant IV 36.75 30375 - Petroleum Supply Specialist 25.51 30390 - Photo-Optics Technician 26.82 30395 - Radiation Control Technician 25.51 30461 - Technical Writer I 23.51 30462 - Technical Writer II 28.76 30463 - Technical Writer III 34.79 30491 - Unexploded Ordnance (UXO) Technician I 24.00 30492 - Unexploded Ordnance (UXO) Technician II 29.04 30493 - Unexploded Ordnance (UXO) Technician III 34.81 30494 - Unexploded (UXO) Safety Escort 24.00 30495 - Unexploded (UXO) Sweep Personnel 24.00 30501 - Weather Forecaster I 27.25 30502 - Weather Forecaster II 28.10 30620 - Weather Observer, Combined Upper Air Or (see 2) 24.15 Surface Programs 30621 - Weather Observer, Senior (see 2) 26.82 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.04 31020 - Bus Aide 13.29 31030 - Bus Driver 18.17 31043 - Driver Courier 15.43 31260 - Parking and Lot Attendant 9.85 31290 - Shuttle Bus Driver 16.94 31310 - Taxi Driver 11.27 31361 - Truckdriver, Light 16.94 31362 - Truckdriver, Medium 17.97 31363 - Truckdriver, Heavy 20.79 31364 - Truckdriver, Tractor-Trailer 20.79 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.16 99030 - Cashier 9.26 99050 - Desk Clerk 10.20 99095 - Embalmer 29.90 99130 - Flight Follower 24.00 99251 - Laboratory Animal Caretaker I 10.84 99252 - Laboratory Animal Caretaker II 11.89 99260 - Marketing Analyst 29.13 99310 - Mortician 30.54 99410 - Pest Controller 17.61 99510 - Photofinishing Worker 13.15

99710 - Recycling Laborer 18.91 99711 - Recycling Specialist 23.43 99730 - Refuse Collector 16.61 99810 - Sales Clerk 12.95 99820 - School Crossing Guard 11.98 99830 - Survey Party Chief 22.43 99831 - Surveying Aide 14.88 99832 - Surveying Technician 20.39 99840 - Vending Machine Attendant 13.15 99841 - Vending Machine Repairer 16.65 99842 - Vending Machine Repairer Helper 13.15

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT…