W912P8-09-R-0026.pdf

USACE, CONTRACTING DIVISION

ATTN: CEMVN-CT, ROOM 172

7400 LEAKE AVE.

NEW ORLEANS LA 70118-3651

UNDER DPAS (15 CFR 700)

11. DELIVERY FOR FOB

RFQ

SEE SCHEDULE

14. METHOD OF SOLICITATION

IFB RFP

CODE

SEE ADDENDUM

BLOCK IS MARKED

DESTINATION UNLESS

12. DISCOUNT TERMS

(No Collect Calls)

13b. RATING

13a. THIS CONTRACT IS A RATED ORDER

X

CODE

W912P8-09-R-0026 07-Jan-2009

b. TELEPHONE NUMBER

504-862-1547

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 29 Jan 2009

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV 3/2005)

Prescribed by GSA

FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER) 31c. DATE SIGNED

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

22. UNIT 23. UNIT PRICE 24. AMOUNT21. QUANTITY

CODE 10. THIS ACQUISITION IS

UNRESTRICTED

FAX: NAICS:

TEL:

CODE 18a. PAYMENT WILL BE MADE BYOFFEROR

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TEL.

W912P8

SIZE STD:

9. ISSUED BY

FACILITY

CODE

17a.CONTRACTOR/

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

ROBBIE F BAILEY

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES

SEE SCHEDULE

336999

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

SB

HUBZONE SB

SET ASIDE: % FOR

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

TEL: EMAIL:

1 COPIES

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

.OFFER DATED YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

X

8(A)

SVC-DISABLED VET-OWNED SB

EMERGING SB

X

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

SEE SCHEDULE

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES 21. QUANTITY 22. UNIT 24. AMOUNT

PAGE 2 OF

23. UNIT PRICE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV 3/2005) BACK

Prescribed by GSA

FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

W912P8-09-R-0026

Section SF 1449 - CONTINUATION SHEET

STATEMENT OF WORK

STATEMENT OF WORK

C.1 DESCRIPTION

C.1.1 Location of Work – Equipment rental and services for this contract will be performed within the limits of the New Orleans Area Office, U.S. Army Engineer District, New Orleans as directed by the Contracting Officer.

C.1.2 Description of Work - The Contractor shall provide all equipment and services listed in Section B as needed to support the geotechnical drilling operations of the New Orleans District Corps of Engineers. The subject equipment and services will be used to support and/or transport geotechnical drilling equipment and personnel into and around hard-to-access areas in the New Orleans District. The geotechnical equipment and personnel will either be that of the U.S. Government or its agents. Work being done by these crews will be geotechnical drilling and sampling of soils and materials in a variety of environments.

C.1.3 Authorization and Assignment of Work - The general procedural guide for the authorization and assignment of work and for the performance of work under this contract is as follows:

a. Written task orders (DD Form 1155) for a designated period will be issued by the Contracting Officer. These task orders will, in general, define the work and will state the end product required.

Task orders will identify projects and the funds obligated against those projects.

b. The task orders issued by the Contracting Officer will be supplemented as necessary, either verbally or in writing, by the Contracting Officer's Representative, to furnish details governing each assignment under the task order, including the date for commencement of work on each respective assignment.

C.1.4 Contractor Responsibilities - The Contractor shall be held responsible for the accuracy, quality and completeness of the services to be provided. In case of unsatisfactory work, the Contractor shall be held responsible as stated in C-2.4. In performing required services, the Contractor shall provide all management necessary in receiving assignments, planning, training personnel, checking completed work, and reporting results. Except as otherwise provided in the specifications, the Contractor shall furnish ALL equipment, personnel, transportation, and fuel as necessary to perform the services required in each task order. All of the above shall be done in accordance with the specifications of this contract.

C.1.5 Contractor Performance - The Contractor shall commence fieldwork on each task order within three calendar days after issuance of the task order by the Contracting Officer. The Contractor shall commence work on each task order at the designated locations at the time specified by the task order. The Contractor will be notified by the Contracting Officer after issuance of the task order of the date and time to commence work on each assignment. The Contractor shall perform each assignment continuously as working conditions permit or as deemed necessary. The Government retains the right to adjust or terminate assignments as per paragraph C.1.5.2 of this contract. The Contractor shall review work in progress to monitor personnel performance in accordance with the contract specifications, Government policy and regulations. The Contractor shall furnish to the Government timely notification when problems arise.

C.1.6 Commencement of Work on a Task Order – Prior to issuance of Task Order each proposed assignment will be discussed by the Contractor's personnel and the Contracting Officer's Representative as necessary to develop a mutual understanding of:

a. Type of work to be done;

b. End result expected by the Contracting Officer; and

c. Methods to be used by the Contractor.

d. Reports to be submitted.

The Contracting Officer’s Representative will determine when a prework meeting is or is not necessary. The requirement for a prework meeting may be waived as determined by the COR. Payment to the Contractor for applicable personnel attending prework meetings shall be in accordance with the provisions of Paragraph C.9.7, Authorization and Assignment of Work. Whether or not a prework meeting is called, the Contractor shall ensure that all Contractor personnel shall be properly oriented relative to the Contractor’s responsibilities prior to beginning an assignment.

The Contractor shall bear any costs to accomplish the above orientation for initial assignments, for substitutions, or replacements of personnel once work has begun, whether dictated by the Contractor or the Government.

C.1.7 Modifications to Task Orders - The Government reserves the right to increase or decrease the amount of services being furnished under each task order, or to discontinue completely or in part the services being furnished as may be deemed necessary by the Contracting Officer or Contracting Officer’s Representative. The Contractor agrees that no claim will be made for additional adjustments based upon increase, decrease, or discontinuance of services.

C.1.8 Remote Areas - Services may be required to be performed in remote areas.

C.1.9 Travel - The Contractor shall furnish all necessary transportation.

Except as may otherwise be provided in this contract, all travel shall be at the Contractor's expense. Time of service rendered will be computed on the basis of actual duty at the worksite except for instances where personnel are required to travel in a boat to reach the worksite, in which case time of service will start when the boat providing transportation disembarks to transport personnel to the worksite.

C.2 PERSONNEL

C.2.1 Personnel Requirements

C.2.1 General Qualifications - All personnel shall be duly qualified and experienced to perform the type of required services in accordance with contract specifications and standard operating procedures including, but not limited to that set forth in publications listed in Section C.3, TECHNICAL SPECIFICATIONS. Personnel who are determined to be not qualified and/or not experienced, or who do not perform the required services in accordance with the provisions herein, or who compromise or jeopardize the Government's position in any way, shall be replaced immediately by the Contractor at his (the Contractor's) expense. Correction of work or reimbursement to the Government by the Contractor shall be as set forth in C.2.4 – UNSATISFACTORY

WORK.

C.2.2 Approval of Personnel - The Contractor shall be responsible for furnishing personnel who meet the minimum qualifications as per Section C of the contract and for the requirements level as determined by the Contracting Officer's Representative for each assignment

C.2. Safety – Contractor will be provided copies of U.S Army Corps of Engineers Safety Manual (EM 385-1-1), C.2.4 Unsatisfactory Work - If The Contractor's work is found to be unsatisfactory during an assignment or after an assignment is completed, and if it is determined that fault or negligence on the part of the Contractor or his employee caused the unsatisfactory condition, the Contractor shall be liable for all costs in connection with correcting the unsatisfactory work.

The work may be performed by Government forces or Contractor forces at the direction of the Contracting Officer or Contracting Officer’s Representative.

In any event, the Contractor will be held responsible for all costs required for correction of the unsatisfactory condition including payments for services, automotive expenses, equipment rental, supervision, and any other costs in connection therewith. For situations where it is impractical for unsatisfactory work to be corrected, the Contractor shall reimburse the Government for the unsatisfactory work by deducting the appropriate costs from the next invoice or by direct repayment.

C.3 TECHNICAL SPECIFICATIONS

C.3.1 Technical Publications - All work performed under this contract shall be in accordance with the following publications, and contractor's personnel shall be familiar with, comply with, and enforce the provisions on same:

a. U.S. Army Corps of Engineers Manual EM 385-1-1 - Safety and Health Requirements Manual, latest edition.

C.4 TRANSPORTATION, EQUIPMENT, AND SUPPLIES

C.4.1 General - Except as otherwise noted herein, the Contractor shall furnish all transportation, equipment, and supplies including, but not limited to, the following: transportation - gasoline, oil, tires, engine parts, accessory parts, repair parts and repair labor

C.4.2 Cost of Delivery - All costs incurred in the delivery to the worksite of vehicles, equipment, and supplies called forth herein shall be borne by the Contractor and shall be included in the unit prices in Section B.

C.4.3 Number of Vehicles - Each proposed assignment will be discussed by the Contractor's Authorized Representative and the Government Field Coordinator to develop a mutual understanding of the number of vehicles to be assigned to a job. The Contracting Officer's Representatives will determine when and how many vehicles are required in performance of assignments.

C.4.4 Vehicle Payment - Payment for each line item identified in the Pricing Schedule will be made on an “as used” basis only. The contractor will be paid at the applicable rate for each vehicle utilized at the work site in conjunction with this contract. The unit price for each vehicle will include the daily ownership cost, daily operating cost and profit. Mobilization for each vehicle will be paid at the established rate in the Pricing Schedule.

Mobilization/demobilization will apply only when vehicles are required to travel to the work site.

C.4.5 Telephone Pagers - The Contractor shall provide a fully operational telephone pager to each Quality Assurance Representative as deemed necessary by the Contracting Officer or Contracting Officer’s Representative. All costs in connection with the telephone pagers are considered to be included in the contract unit prices listed in Section B, Supplies or Services and Prices/Costs and shall not be paid for as a separate item.

C.4.6 Unsatisfactory Equipment - Any equipment that the Contracting Officer or Contracting Officer’s Representative considers unsatisfactory for accurately performing the services shall be replaced immediately upon notification by the Government Field Coordinator. All costs to replace such equipment shall be borne by the Contractor.

C.5 SAFETY PROVISIONS

C.5.1 General Safety Requirements - EM 385-1-1, "U.S. Army Corps of Engineers Safety & Health Requirements Manual" dated 3 November 2003 is a part of these specifications.

C.5.2 Occupational Safety & Health Act - This contract is subject to the provisions of the Safety Health Regulations for Construction and Occupational Safety and Health Standards, which were published by the Department of Labor under authority of Public Laws 91-54 and 91-596.

C.5.3 Accident Investigations and Reporting - Reference EM 385-1-1, Section

01. Accidents shall be investigated by the immediate supervisor of the employee(s) involved and reported to the Contracting Officer or Contracting Officer’s Representative within one working day after the accident occurs.

C.6 PERIOD OF PERFORMANCE

C.6.1 This contract shall be in effect for a period not to exceed one year (365 days) from the date of award. Additionally, the contract period will cease upon total accumulation of earnings and reimbursements in the total amount of $500,000.00 should it occur before the end of the 365-day period.

The contract period shall be extended an additional period per option or until the ceiling of $500,000.00 per option is reached, whichever is sooner, if the Contracting Officer exercises the options. The total value of task orders issued cannot exceed $500,000.00 per contract period.

C.7 OBJECTIONABLE EMPLOYEES - The Contractor shall exercise extraordinary diligence to obtain competent employees of good reputation and shall safeguard all data and prevent the theft or unauthorized use of the same. The Contracting Officer or Contracting Officer’s Representative reserves the right to require replacement of any personnel immediately upon determining that a person is not performing the required services in accordance with recognized standards, procedures and competency. Should the continued employment of any of the contractor's personnel performing services under this contract be deemed by the Contracting Officer or the Contracting Officer’s Representative to be prejudicial to the interest of the Government, that person shall be immediately removed from the work. The Contractor will make a satisfactory replacement for the personnel released at his (the Contractor's) expense.

C.8 AUTHORIZATION AND ASSIGNMENT OF WORK - The general procedural guide for the authorization, assignment and payment of work and for the performance of work under this contract is as follows:

a. Task Order Guidance - The task order issued by the Contracting Officer may be supplemented as necessary, either verbally or in writing by the Contracting Officer’s Representative, to furnish details governing each assignment under the task order.

b. Compliance with Laws and Regulations - The Contractor shall be responsible for his employees' strict observance of any Federal, State or local laws and regulations that affect all operations under this contract, including those concerning the inspection of equipment.

c. Travel - The Contractor shall furnish all necessary transportation.

Except as may otherwise be provided in this contract, all travel will be at the Contractor's expense. Time of service rendered will be computed on the basis of actual duty at the work site except for instances where the work site cannot be reached by the vehicles to be provided under Contract. Travel beyond the point that can be reached by Contractor’s vehicles will be considered as work time. Travel in conjunction with replacement personnel absent from work for any cause will be at the expense of the Contractor and the Government will make no reimbursement.

d. Invoices - Payment will be made monthly for all services satisfactorily performed during that period. The Contractor will submit invoices in triplicate through the designated Government Field Coordinator to the Disbursing Office in Millington, TN. One copy shall simultaneously be furnished to the Contracting Officer’s Representative. Invoices shall be signed by an officer of the company or the Contractor's Authorized Representative as designated in writing. Payment under this contract, for which property or services are provided in a series of partial executions or deliveries, will be made on the 30th day after receipt in the Disbursing Office of an invoice which has been properly executed by the Contractor and approved by the Contracting Officer’s Representative.

j. Documentation of Time - Each Quality Assurance Representative shall prepare and submit in a timely manner a daily time and attendance record to the Government Field Coordinator. Contract forms shall be approved by the Government prior to use by Contractor personnel. No payment will be made for work claimed on Contractor invoices for which no daily time and attendance record has been submitted by Contractor personnel and subsequently approved by the Government.

SCHEDULE OF PRICES

SF 1449 Continuation Sheet

PRICING SCHEDULE

BASE YEAR PERIOD

LINE SERVICES EST. UNIT UNIT TOTAL

ITEM QUANT. PRICE PRICE

1 CARGO BUGGY DAYS

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 20,000 lbs.

minimum deck size of 18’x 30’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

1A MOBILIZATION MILEAGE

FOR ABOVE

1A1 0-100 miles 1A2 101-200 miles

2 MARSH BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 8,000 lbs.

minimum deck size of 14’x 25’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

2A MOBILIZATION MILEAGE

FOR ABOVE

2A1 0-100 miles 2A2 101-200 miles

3 SWAMP BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 3,000 lbs.

minimum deck size of 8’x 22’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

3A MOBILIZATION MILEAGE

FOR ABOVE

3A1 0-100 miles 3A2 101-200 miles

4 MARSH EXCAVATOR

Provide self-propelled 30 amphibious craft/vehicle with operator, minimum excavating capacity of 20 metric tons/ maximum excavating capacity of 30 metric tons.

4A MOBILIZATION MILEAGE

FOR ABOVE

4A1 0-100 miles 4A2 101-200 miles

5 SKID PONTOONS

Provide a flotation 30 Device capable of Being towed by amphibious craft/vehicle, minimum payload 3,000 lbs.

minimum deck size of

12’x 25’ with width being up to3’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

5A MOBILIZATION MILEAGE

FOR ABOVE

5A1 0-100 miles 5A2 101-200 miles

6 AIRBOAT

Provide a self-propelled 14 Boat w/operator, payload Capacity of 4 passengers Minimum.

6A MOBILIZATION MILEAGE

FOR ABOVE

6A1 0-100 miles 6A2 101-200 miles

7 JACK-UP BOATS 7

Provide small boat:

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 18” Payload 15,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting skid-type drilling rig.

7A MOBILIZATION MILEAGE

7A1 0-100 miles 7A2 101-200 miles

8 JACK-UP BOATS 7

Provide large boat:

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 30” Payload 25,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting truck mounted drilling rig.

8A MOBILIZATION MILEAGE

FOR ABOVE

8A1 0-100 miles 8A2 101-200 miles

9 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Provide vehicle without Operator. Any of 3 different Payload sizes may be needed.

Type 1- 1,000-1,500 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

9A MOBILIZATION MILEAGE

FOR ABOVE

9A1 0-100 miles 9A2 101-200 miles

10 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Type 2- 1,500-2,000 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

10A MOBILIZATION MILEAGE

FOR ABOVE

10A1 0-100 miles 10A2 101-200 miles

11 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Type 3- 2,000-3,500 lbs.

length not to exceed 10’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

11A MOBILIZATION MILEAGE

FOR ABOVE

11A1 0-100 miles 11A2 101-200 miles

12 SPUD BARGE 14

Provide barge, deck size of 40-50’ width & length 110’ -120’. Deck must have adjustable boring hole (12” minimum diameter.)

Self-elevating spuds w/ safety locks.

12A MOBILIZATION MILEAGE

FOR ABOVE

12A1 0-100 miles 12A2 101-200 miles

13 TUGBOAT 14

Provide 400 HP tug Capable of pushing Spudbarge above, w/operator & crew.

13A MOBILIZATION MILEAGE

FOR ABOVE

13A1 0-100 miles 13A2 101-200 miles

14 TUGBOAT 14

Provide 600 HP tug Capable of pushing Spudbarge above, w/operator & crew.

14A MOBILIZATION MILEAGE

FOR ABOVE

14A1 0-100 miles 14A2 101-200 miles

15 SUPPORT BOAT 21

Provide boat, 7-passenger Capacity, w/operator.

Payload 1,500 lbs minimum.

Capable of 20 knots.

15A MOBILIZATION MILEAGE

15A1 0-100 miles 15A2 101-200 miles

FIRST OPTION PERIOD

16 CARGO BUGGY

Provide a self-propelled 60 DAYS Amphibious craft/vehicle w/operator,minimum payload 20,000 lbs.

minimum deck size of 18’x 30’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

16A MOBILIZATION MILEAGE

FOR ABOVE

16A1 0-100 miles 16A2 101-200 miles

17 MARSH BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 8,000 lbs.

minimum deck size of 14’x 25’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

17A MOBILIZATION MILEAGE

FOR ABOVE

17A1 0-100 miles 17A2 101-200 miles

18 SWAMP BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 3,000 lbs.

minimum deck size of 8’x 22’ with width being up to 5’ greater & length up to 10’ greater. Deck hole (12” minimum diameter.)

18A MOBILIZATION MILEAGE

FOR ABOVE

18A1 0-100 miles 18A2 101-200 miles

19 MARSH EXCAVATOR

Provide self-propelled 30 amphibious craft/vehicle with operator, minimum excavating capacity of 20 metric tons/ maximum excavating capacity of 30 metric tons.

19A MOBILIZATION MILEAGE

FOR ABOVE

19A1 0-100 miles 19A2 101-200 miles

20 SKID PONTOONS

Provide a flotation 30 Device capable of Being towed by amphibious craft/vehicle, minimum payload 3,000 lbs.

minimum deck size of

12’x 25’ with width being up to3’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

20A MOBILIZATION MILEAGE

FOR ABOVE

20A1 0-100 miles 20A2 101-200 miles

21. AIRBOAT

Provide a self-propelled 14 Boat w/operator, payload Capacity of 4 passengers Minimum.

21A MOBILIZATION MILEAGE

FOR ABOVE

21A1 0-100 miles 21A2 101-200 miles

22 JACK-UP BOATS 7

Provide small boat:

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 18” Payload 15,000 lbs.

Deck w/adjustable boring hole (12” minimum diameter.)

capable of mounting skid-type drilling rig.

22A MOBILIZATION MILEAGE

FOR ABOVE

22A1 0-100 miles 22A2 101-200 miles

23 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 30” Payload 25,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting truck mounted drilling rig.

23A MOBILIZATION MILEAGE

FOR ABOVE

23A1 0-100 miles 23A2 101-200 miles

24 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Provide vehicle without Operator. Any of 3 different Payload sizes may be needed.

Type 1- 1,000-1,500 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

24A MOBILIZATION MILEAGE

FOR ABOVE

24A1 0-100 miles 24A2 101-200 miles

25 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Type 2- 1,500-2,000 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

25A MOBILIZATION MILEAGE

25A1 0-100 miles 25A2 101-200 miles

26 SELF-PROPELLED ALL 20

Type 3- 2,000-3,500 lbs.

length not to exceed 10’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

26A MOBILIZATION MILEAGE

FOR ABOVE

26A1 0-100 miles 26A2 101-200 miles

27 SPUD BARGE 14

Provide barge, deck size of 40-50’ width & length 110’ -120’. Deck must have adjustable boring hole (12” minimum diameter.)

Self-elevating spuds w/ safety locks.

27A MOBILIZATION MILEAGE

FOR ABOVE

27A1 0-100 miles 27A2 101-200 miles

28 TUGBOAT 14

Provide 400 HP tug Capable of pushing Spudbarge above, w/operator & crew.

28A MOBILIZATION MILEAGE

FOR ABOVE

28A1 0-100 miles 28A2 101-200 miles

29 TUGBOAT 14

Provide 600 HP tug Capable of pushing Spudbarge above, w/operator & crew.

29A MOBILIZATION MILEAGE

FOR ABOVE

29A1 0-100 miles 29A2 101-200 miles

30 SUPPORT BOAT 21

Provide boat, 7-passenger

Capacity, w/operator.

Payload 1,500 lbs minimum.

Capable of 20 knots.

30A MOBILIZATION MILEAGE

30A1 0-100 miles 30A2 101-200 miles

SECOND OPTION PERIOD

31 CARGO BUGGY DAYS

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 20,000 lbs.

minimum deck size of 18’x 30’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

31A MOBILIZATION MILEAGE

FOR ABOVE

31A1 0-100 miles 31A2 101-200 miles

32 MARSH BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 8,000 lbs.

minimum deck size of 14’x 25’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

32A MOBILIZATION MILEAGE

FOR ABOVE

32A1 0-100 miles 32A2 101-200 miles

33 SWAMP BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 3,000 lbs.

minimum deck size of 8’x 22’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

33A MOBILIZATION MILEAGE

FOR ABOVE

33A1 0-100 miles 33A2 101-200 miles

34 MARSH EXCAVATOR

Provide self-propelled 30 amphibious craft/vehicle with operator, minimum excavating capacity of 20 metric tons/ maximum excavating capacity of 30 metric tons.

34A MOBILIZATION MILEAGE

FOR ABOVE

34A1 0-100 miles 34A2 101-200 miles

35 SKID PONTOONS

Provide a flotation 30 Device capable of Being towed by amphibious craft/vehicle, minimum payload 3,000 lbs.

minimum deck size of

12’x 25’ with width being up to3’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

35A MOBILIZATION MILEAGE

FOR ABOVE

35A1 0-100 miles 35A2 101-200 miles

36 AIRBOAT

Provide a self-propelled 14 Boat w/operator, payload Capacity of 4 passengers

Minimum.

36A MOBILIZATION MILEAGE

FOR ABOVE

36A1 0-100 miles 36A2 101-200 miles

37 JACK-UP BOATS 7

Provide small boat:

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 18” Payload 15,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting skid-type drilling rig.

37A MOBILIZATION MILEAGE

37A1 0-100 miles 37A2 101-200 miles

38 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 30” Payload 25,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting truck mounted drilling rig.

38A MOBILIZATION MILEAGE

FOR ABOVE

38A1 0-100 miles 38A2 101-200 miles

39 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Provide vehicle without Operator. Any of 3 different Payload sizes may be needed.

Type 1- 1,000-1,500 lbs. Width 7’-8’, length 12’-15’. All vehicles

39A MOBILIZATION MILEAGE

39A1 0-100 miles 39A2 101-200 miles

40 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Type 2- 1,500-2,000 lbs. Width 7’-8’, length 12’-15’. All vehicles

40A MOBILIZATION MILEAGE

40A1 0-100 miles 40A2 101-200 miles

41 SELF-PROPELLED ALL 20

Type 3- 2,000-3,500 lbs.

length not to exceed 10’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

41A MOBILIZATION MILEAGE

FOR ABOVE

41A1 0-100 miles 41A2 101-200 miles

42 SPUD BARGE 14

Provide barge, deck size of 40-50’ width & length 110’ -120’. Deck must have adjustable boring hole (12” minimum diameter.)

Self-elevating spuds w/ safety locks.

42A MOBILIZATION MILEAGE

FOR ABOVE

42A1 0-100 miles 42A2 101-200 miles

43 TUGBOAT 14

Provide 400 HP tug Capable of pushing Spudbarge above, w/operator & crew.

43A MOBILIZATION MILEAGE

43A1 0-100 miles

43A2 101-200 miles

44 TUGBOAT 14

Provide 600 HP tug Capable of pushing Spudbarge above, w/operator & crew.

44A MOBILIZATION MILEAGE

FOR ABOVE

44A1 0-100 miles 44A2 101-200 miles

45 SUPPORT BOAT 21

Provide boat, 7-passenger Capacity, w/operator.

Payload 1,500 lbs minimum.

Capable of 20 knots.

45A MOBILIZATION MILEAGE

FOR ABOVE

45A1 0-100 miles 45A2 101-200 miles

THIRD OPTION PERIOD

46 CARGO BUGGY DAYS

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 20,000 lbs.

minimum deck size of 18’x 30’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

46A MOBILIZATION MILEAGE

FOR ABOVE

46A1 0-100 miles 46A2 101-200 miles

47 MARSH BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 8,000 lbs.

minimum deck size of

14’x 25’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

47A MOBILIZATION MILEAGE

FOR ABOVE

47A1 0-100 miles 47A2 101-200 miles

48 SWAMP BUGGY

Amphibious craft/vehicle w/operator,minimum payload 3,000 lbs.

minimum deck size of 8’x 22’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

48A MOBILIZATION MILEAGE

FOR ABOVE

48A1 0-100 miles 48A2 101-200 miles

49 MARSH EXCAVATOR

Provide self-propelled 30 amphibious craft/vehicle with operator, minimum excavating capacity of 20 metric tons/ maximum excavating capacity of 30 metric tons.

49A MOBILIZATION MILEAGE

FOR ABOVE

49A1 0-100 miles 49A2 101-200 miles

50 SKID PONTOONS

Provide a flotation 30 Device capable of Being towed by amphibious craft/vehicle, minimum payload 3,000 lbs.

minimum deck size of

12’x 25’ with width being up to3’ greater & length up to 10’ greater. Deck

50A MOBILIZATION MILEAGE

FOR ABOVE

50A1 0-100 miles 50A2 101-200 miles

51 AIRBOAT

Provide a self-propelled 14 Boat w/operator, payload

51A MOBILIZATION MILEAGE

51A1 0-100 miles 51A2 101-200 miles

52 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 18” Payload 15,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting skid-type drilling rig.

52A MOBILIZATION MILEAGE

FOR ABOVE

52A1 0-100 miles 52A2 101-200 miles

53 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 30” Payload 25,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting truck mounted drilling rig.

53A MOBILIZATION MILEAGE

FOR ABOVE

53A1 0-100 miles 53A2 101-200 miles

54 SELF-PROPELLED ALL 20

Provide vehicle without Operator. Any of 3 different Payload sizes may be needed.

Type 1- 1,000-1,500 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

54A MOBILIZATION MILEAGE

FOR ABOVE

54A1 0-100 miles 54A2 101-200 miles

55 SELF-PROPELLED ALL 20

Type 2- 1,500-2,000 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

55A MOBILIZATION MILEAGE

FOR ABOVE

55A1 0-100 miles 55A2 101-200 miles

56 SELF-PROPELLED ALL 20

Type 3- 2,000-3,500 lbs.

length not to exceed 10’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

56A MOBILIZATION MILEAGE

FOR ABOVE

56A1 0-100 miles 56A2 101-200 miles

57 SPUD BARGE 14

Provide barge, deck size of 40-50’ width & length 110’ -120’. Deck must have adjustable boring hole (12” minimum diameter.)

Self-elevating spuds w/ safety locks.

57A MOBILIZATION MILEAGE

FOR ABOVE

57A1 0-100 miles 57A2 101-200 miles

58 TUGBOAT 14

Provide 400 HP tug Capable of pushing Spudbarge above, w/operator & crew.

58A MOBILIZATION MILEAGE

FOR ABOVE

58A1 0-100 miles 58A2 101-200 miles

59 TUGBOAT 14

Provide 600 HP tug Capable of pushing Spudbarge above, w/operator & crew.

59A MOBILIZATION MILEAGE

FOR ABOVE

59A1 0-100 miles 59A2 101-200 miles

60 SUPPORT BOAT 21

Capacity, w/operator.

Payload 1,500 lbs minimum.

Capable of 20 knots.

60A MOBILIZATION MILEAGE

FOR ABOVE

60A1 0-100 miles 60A2 101-200 miles

FOURTH OPTION PERIOD

ITEM QUANT. PRICE PRICE

61 CARGO BUGGY DAYS

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 20,000 lbs.

minimum deck size of 18’x 30’ with width being up to 5’ greater & length up to 10’ greater. Deck

61A MOBILIZATION MILEAGE

61A1 0-100 miles 61A2 101-200 miles

62 MARSH BUGGY

Provide a self-propelled 60 Amphibious craft/vehicle w/operator,minimum payload 8,000 lbs.

minimum deck size of 14’x 25’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

62A MOBILIZATION MILEAGE

FOR ABOVE

62A1 0-100 miles 62A2 101-200 miles

63 SWAMP BUGGY

Amphibious craft/vehicle w/operator,minimum payload 3,000 lbs.

minimum deck size of 8’x 22’ with width being up to 5’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

63A MOBILIZATION MILEAGE

FOR ABOVE

63A1 0-100 miles 63A2 101-200 miles

64 MARSH EXCAVATOR

Provide self-propelled 30 amphibious craft/vehicle with operator, minimum excavating capacity of 20 metric tons/ maximum excavating capacity of 30 metric tons.

64A MOBILIZATION MILEAGE

FOR ABOVE

64A1 0-100 miles 64A2 101-200 miles

65 SKID PONTOONS

Provide a flotation 30 Device capable of Being towed by amphibious craft/vehicle, minimum payload 3,000 lbs.

minimum deck size of

12’x 25’ with width being up to3’ greater & length up to 10’ greater. Deck must have adjustable boring hole (12” minimum diameter.)

65A MOBILIZATION MILEAGE

FOR ABOVE

65A1 0-100 miles 65A2 101-200 miles

66 AIRBOAT

Provide a self-propelled 14 Boat w/operator, payload

66A MOBILIZATION MILEAGE

66A1 0-100 miles 66A2 101-200 miles

67 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via Public roads to/from Jobsite. Draft to 18” Payload 15,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting skid-type drilling rig.

67A MOBILIZATION MILEAGE

FOR ABOVE

67A1 0-100 miles 67A2 101-200 miles

68 JACK-UP BOATS 7

Self-propelled w/operator.

Transportable via

Public roads to/from Jobsite. Draft to 30” Payload 25,000 lbs.

Deck w adjustable boring hole (12” minimum diameter.)

capable of mounting truck mounted drilling rig.

68A MOBILIZATION MILEAGE

FOR ABOVE

68A1 0-100 miles 68A2 101-200 miles

69 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Provide vehicle without Operator. Any of 3 different Payload sizes may be needed.

Type 1- 1,000-1,500 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

69A MOBILIZATION MILEAGE

FOR ABOVE

69A1 0-100 miles 69A2 101-200 miles

70 SELF-PROPELLED ALL 20

TERRAIN VEHICLE

Type 2- 1,500-2,000 lbs. Width 7’-8’, length 12’-15’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

70A MOBILIZATION MILEAGE

FOR ABOVE

70A1 0-100 miles 70A2 101-200 miles

71 SELF-PROPELLED ALL 20

Type 3- 2,000-3,500 lbs.

length not to exceed 10’. All vehicles Must be transportable via trailer, Capable of moving on public roads.

71A MOBILIZATION MILEAGE

FOR ABOVE

71A1 0-100 miles 56A2 101-200 miles

72 SPUD BARGE 14

Provide barge, deck size of 40-50’ width & length 110’ -120’. Deck must have adjustable boring hole (12” minimum diameter.)

Self-elevating spuds w/ safety locks.

72A MOBILIZATION MILEAGE

FOR ABOVE

72A1 0-100 miles 72A2 101-200 miles

73 TUGBOAT 14

Provide 400 HP tug Capable of pushing Spudbarge above, w/operator & crew.

73A MOBILIZATION MILEAGE

FOR ABOVE

73A1 0-100 miles 73A2 101-200 miles

74 TUGBOAT 14

Provide 600 HP tug Capable of pushing Spudbarge above, w/operator & crew.

74A MOBILIZATION MILEAGE

74A1 0-100 miles 74A2 101-200 miles

75 SUPPORT BOAT 21

Capacity, w/operator.

Payload 1,500 lbs minimum.

Capable of 20 knots.

75A MOBILIZATION MILEAGE

FOR ABOVE

75A1 0-100 miles 75A2 101-200 miles

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Days

BASE YEAR

FFP

From Date Of Award forward 365 days. The Contractor shall provide, as tasked, all transportation of equipment & personnel; requested equipment in accordance with (IAW) each task order for the ordered period. Mileage will be paid to the requested site IAW the contract. Pricing for each item shall be in accordance with the attached pricing sheet.

FOB: Destination

NET AMT

0002 Days

OPTION FIRST OPTION PERIOD (2010-2011)

FFP

The Contractor shall provide, as tasked, all transportation of equipment & personnel, requested equipment IAW each task order for the ordering period.

Mileage will be paid to the requested site IAW the contract. Pricing for each item shall be IAW the attached pricing sheet.

0003 Days

OPTION SECOND OPTION PERIOD (2011-2012)

FFP

The Contractor shall provide, as tasked, all transportation of equipment & personnel; requested equipment in accordance with (IAW) each task order for the ordered period. Mileage will be paid to the requested site IAW the contract.

Pricing for each item shall be in accordance with the attached pricing sheet.

0004 Days

OPTION THIRD OPTION PERIOD (2012-2013)

FFP

The Contractor shall provide, as tasked, all transportation of equipment & personnel; requested equipment in accordance with (IAW) each task order for the ordered period. Mileage will be paid to the requested site IAW the contract.

0005 Days

OPTION FOURTH OPTION PERIOD (2013-2014)

FFP

The Contractor shall provide, as tasked, all transportation of equipment & personnel; requested equipment in accordance with (IAW) each task order for the ordered period. Mileage will be paid to the requested site IAW the contract.

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

10,000.00 500,000.00 $2,500,000.00

DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE

The minimum quantity and order value for each Delivery/Task Order issued shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for each Delivery/Task Order issued shall not exceed the maximum quantity and order value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

$500,000.00

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.

CLIN

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government 0002 N/A N/A N/A Government 0003 N/A N/A N/A Government 0004 N/A N/A N/A Government 0005 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 POP 01-FEB-2009 TO

31-JAN-2010

N/A N/A

0002 POP 01-FEB-2010 TO

31-JAN-2011

0003 POP 01-FEB-2011 TO

31-JAN-2012

0004 POP 01-FEB-2012 TO

31-JAN-2013

0005 POP 01-FEB-2013 TO

31-JAN-2014

CLAUSES INCORPORATED BY REFERENCE

52.212-1 Instructions to Offerors--Commercial Items JUN 2008 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A SEP 2007 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

MAR 2008

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

MAR 2008

CLAUSES INCORPORATED BY FULL TEXT

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JUN 2008)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision.

(a) Definitions. As used in this provision --

"Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except--

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website.

(2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------.

(Offeror to identify the applicable paragraphs at (c) through (m) of this provision that the offeror has completed for the purposes of this solicitation only, if any.)

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern.

Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business…