Amendment_0003_W912P618B0003_COUNTRY_CLUB_HILLS.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

REFERENCE: INVITATION FOR BIDS NO. W912P618B0003, "WATER MAIN REPLACEMENT PROJECT AT THE CITY OF COUNTRY CLUB HILLS, COOK COUNTY, IL (USACE-CHICAGO DISTRICT ACQUISITION)"

- SEE THE FOLLOWING PAGES FOR THE AMENDMENT PARTICULARS -

1. CONTRACT ID CODE PAGE OF PAGES

1 60

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Jan-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P618B0003

X 9B. DATED (SEE ITEM 11)

15-Dec-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Jan-2018

CODE

U.S. ARMY ENGINEER DISTRICT, CHICAGO

231 SOUTH LASALLE STREET SUITE 1500

CHICAGO IL 60604-1437

W912P6 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912P618B0003

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

SUMMARY OF CHANGES

A. The BID Opening Date and Time remains unchanged by this Amendment; therefore, BIDS shall be provided to the USACE‐Chicago District by 2:00 p.m. (CDT) on January 19, 2018.

B. By this Amendment, revisions have been made to the Bidding Schedule (Section 00 10 00 – Solicitation Contract Form); therefore, Bidders shall remove and replace the previously issued respective Section with the Revised Section 00 10 00 enclosed hereunder. Bidders shall provide their prices on the Revised Bidding Schedule.

(1) Added to the Bid Schedule is CLIN 0004BE for Gate Valve 8" In 4 Ft Diameter Valve Vault, Type 1 Frame, Closed Lid

(2) CLIN 0004BF is now Performance & Payment Bond for Option Area #3 (Line Items 0004AA through 0004BE)

C. This Amendment includes Revised Specification Section 01 22 00.00 10, which was revised to include the addition of the option bid item and renumbering of the performance and payment bond option bid item.

D. CONTRACTOR’S INQUIRY: By this Amendment, the Chicago District, USACE responds to a Contractor’s inquiry as follows:

Question: On drawing CU‐103 approximately at station 4+30, we have noticed on the plans that there is a 8 inch valve in vault, but there is no bid item for this work.

USACE Response: See enclosed revised bid schedule and the revised enclosed section 01 22 00.00 10 wherein a new CLIN 0004BE has been added to encompass the work.

E. Included hereunder is the most current Wage Determination – see attached General Decision IL9, dated January 12, 2018.

F. The Point of Contact (POC) for this Amendment is Ericka Hillard, who may be reached by phone at 312‐846‐5378.

G. ANY AND ALL TECHNICAL OR CONTRACTING INQUIRIES SHALL BE PROVIDED IN WRITING AND EMAILED TO ERICKA D. HILLARD at ericka.d.hillard@usace.army.mil.

mailto:ericka.d.hillard@usace.army.mil

REVISED BIDDING SCHEDULE – Section 00 10 00 – SOLICITATION CONTRACT FORM (VIA AMENDMENT 0003) (Bidders shall complete the below Bidding Schedule and furnish it along with the other items required by this Solicitation)

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

BASE BID ITEMS

FFP

This is a parent Contract Line Item, linking its Sub-Items 0001AA through 0001BF. The actual work to be performed is described under the aforementioned Sub-Items. In that regard, the Contractor's pricing to perform the required services shall be provided therein Items 0001AA through 0001BF, wherein the sub-line items themselves identify the quantities required to perform said work.

NET AMT

0001AA 1 Job

MOBILIZATION (BASE)

FFP

Under this CLIN, the contractor is required to perform mobilization activities. The contractor will be compensated for the totality of its activities needed to mobilize its equipment and labor force to the project site.

Payment Provisions:

The Government will pay all costs for the mobilization of all of the Contractor's plant and equipment at the unit price for this item. The Contracting Officer or its Representative may require the Contractor to furnish cost data to justify its bid price for this item if the Contracting Officer deems there's no reasonable relationship to the cost of the work in this contract. Failure to justify the line item price to the satisfaction of the Contracting Officer will result in payment determined by the Contracting Officer of the actual costs, which is not subject to appeal.

0001AB 1 Job

DEMOBILIZATION (BASE)

FFP

Under this CLIN, the contractor is required to perform demobilization activities.

The contractor will be compensated for the totality of its activities needed to demobilize its equipment and labor force to the project site.

Payment Provisions:

The Government will pay all costs for the demobilization of all of the Contractor's plant and equipment at the unit price for this item. The Contracting Officer or its Representative may require the Contractor to furnish cost data to justify its bid price for this item if the Contracting Officer deems there's no reasonable relationship to the cost of the work in this contract. Failure to justify the line item price to the satisfaction of the Contracting Officer will result in payment determined by the Contracting Officer of the actual costs, which is not subject to appeal.

0001AC 1 Job

TRAFFIC CONTROL (BASE)

FFP

0001AD 6 Each

INLET FILTERS (BASE)

0001AE 3 Each

TREE PROTECTION (BASE)

0001AF 557 Square

Yard

PAVEMENT REMOVAL (BASE)

0001AG 30 Linear

Foot

COMBINATION CURB & GUTTER REMOVAL (BASE)

0001AH 50 Square

DRIVEWAY PAVEMENT REMOVAL (BASE)

0001AJ 200 Square

SIDEWALK REMOVAL (BASE)

0001AK 2 Each

FIRE HYDRANTS TO BE REMOVED (BASE)

0001AL 3 Each

REMOVE AND ABANDON VALVE BOX (BASE)

0001AM 1 Each

WATER MAIN TO BE ABANDONED, 6" (BASE)

0001AN 10 Each

SANITARY SEWER SERVICE ADJUSTMENT (BASE)

0001AP 4 Each

6" CUT AND CAP (BASE)

0001AQ 1 Each

8" CUT AND CAP (BASE)

0001AR 761 Linear

DUCTILE IRON WATER MAIN, 8" (BASE)

Ductile Iron Water Main, Class 52 With Polyethylene Encasement, 8"

0001AS 2 Each

FIRE HYDRANT ASSEMBLY COMPLETE (BASE)

0001AT 2 Each

6"X6" TAPPING SLEEVE & VALVE (BASE)

FFP

6" X 6" Tapping Sleeve And Valve In Valve Vault, Type A, 4' Diameter, Type 1

0001AU 2 Each

8"X8" TAPPING SLEEVE & VALVE (BASE)

FFP

8" X 8" Tapping Sleeve And Valve In Valve Vault, Type A, 5' Diameter, Type 1

0001AV 22 Linear

STEEL CASINGS 20"

0001AW 8 Each

REMOVE EXISTING WATER VALVE (BASE)

0001AX 8 Each

GATE VALVE 8" (BASE)

Gate Valve 8" In 4 Ft Diameter Valve Vault, Type 1 Frame, Closed Lid

0001AY 10 Each

1" WATER SERVICE (SHORT) (BASE)

0001AZ 10 Each

1" WATER SERVICE (LONG) (BASE)

0001BA 557 Square

CLASS D PATCHES, TYPE IV, 4 INCH (BASE)

0001BB 50 Square

HOT-MIX ASPHALT DRIVEWAY, 4" (BASE)

Hot-Mix Asphalt Driveway Pavement, 4"

0001BC 200 Square

PORTLAND CEMENT CONCRETE 5 INCH (BASE)

Portland Cement Concrete Sidewalk 5 Inch

0001BD 30 Linear

COMBINATION CURB & GUTTER (BASE)

Combination Curb And Gutter Replacement

0001BE 100 Square

SODDING, SALT TOLERANT (SPECIAL) (BASE)

0001BF 1 Lot

PERFORMANCE & PAYMENT BONDS (BASE)

FFP

BONDS FOR BASE WORK LINE ITEMS 0001AA THROUGH 0001BE

THIS IS A COST-REIMBURSABLE LINE ITEM - The government will reimburse the Contractor for the actual cost of acceptable performance and payment bonds, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the performance and payment bonds. If the actual cost of the bonds is less than the line item amount, the contract will modified to adjust the line item accordingly.

Adjustment(s) to the line item will also be made for any revisions to the actual bond costs associated with contract changes.

OPTION OPTION AREA #1 BID ITEMS

FFP

This a Parent Line Item identifying the option work that relates directly to its Sub- Line Items 0002AA through 0002AX; the Sub-Line Items themselves identify the quantities required to perform said work. Therefore, the Contractor shall provide the pricing at Sub-Line Items 0002AA through 0002AX.

0002AA 1 Job

OPTION TRAFFIC CONTROL (OPTION AREA #1)

0002AB 2 Each

OPTION INLET FILTERS (OPTION AREA #1)

0002AC 656 Square

OPTION PAVEMENT REMOVAL (OPTION AREA #1)

0002AD 25 Linear

OPTION COMBINATION CURB & GUTTER(OPTION AREA#1)

Combination Curb And Gutter Removal

0002AE 22 Square

OPTION DRIVEWAY PAVEMENT (OPTION AREA #1)

Driveway Pavement Removal

0002AF 50 Square

OPTION SIDEWALK REMOVAL (OPTION AREA #1)

0002AG 1 Each

OPTION REMOVE & ABANDON VALVE (OPTION AREA #1)

Remove And Abandon Valve Box

0002AH 1 Each

OPTION WATER MAIN, 8" (OPTION AREA #1)

Water Main To Be Abandoned, 8"

0002AJ 3 Each

OPTION SANITARY SEWER SERVICE (OPTION AREA #1)

Sanitary Sewer Service Adjustment

0002AK 1 Each

OPTION 6" CUT AND CAP (OPTION AREA #1)

0002AL 184 Linear

OPTION DUCTILE IRON WATER MAIN (OPTION AREA #1)

0002AM 1 Each

OPTION 6"X6" TAPPING SLEEVE (OPTION AREA #1)

6" X 6" Tapping Sleeve And Valve In Valve Box

0002AN 2 Each

OPTION 8"X8" TAPPING SLEEVE (OPTION AREA #1)

FFP

0002AP 38 Linear

OPTION STEEL CASINGS 20" (OPTION AREA #1)

0002AQ 3 Each

OPTION 1" WATER SERVICE (SHORT)(OPTION AREA #1)

0002AR 656 Square

OPTION CLASS D PATCHES, 4 INCH (OPTION AREA #1)

Class D Patches, Type IV, 4 Inch

0002AS 22 Square

OPTION HOT-MIX ASPHALT, 4" (OPTION AREA #1)

0002AT 50 Square

OPTION PORTLAND CEMENT, 5 INCH (OPTION AREA #1)

0002AU 25 Linear

OPTION COMBINATION CURB&GUTTER (OPTION AREA #1)

0002AV 36 Square

OPTION SODDING, SALT TOLERANT (OPTION AREA #1)

Sodding, Salt Tolerant (Special)

0002AW 81 Linear

OPTION DETECTOR LOOP (OPTION AREA #1)

Detector Loop Replacement

0002AX 1 Lot

OPTION PERFORMANCE&PAYMENT BOND(OPTION AREA #1)

FFP

BONDS FOR OPTION AREA #1 BID ITEMS (LINE ITEMS 0002AA through

0002AW)

THIS IS A COST-REIMBURSABLE LINE ITEM - The government will reimburse the Contractor for the actual cost of acceptable performance and payment bonds, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the performance and payment bonds. If the actual cost of the bonds is less than the line item amount, the contract will modified to adjust the line item accordingly.

OPTION OPTION AREA #2 BID ITEMS

FFP

This a Parent Line Item identifying the option work that relates directly to its Sub- Line Items 0003AA through 0003BG; the Sub-Line Items themselves identify the the pricing at Sub-Line Items 0003AA through 0003BG.

0003AA 1 Job

OPTION TRAFFIC CONTROL (OPTION AREA #2)

0003AB 1,064 Linear

OPTION PERIMETER EROSION BARRIER(OPTION AREA#2)

0003AC 110 Linear

OPTION PIPE PROTECTION (OPTION AREA #2)

0003AD 14 Each

OPTION INLET FILTERS (OPTION AREA #2)

0003AE 1,680 Square

OPTION PAVEMENT REMOVAL (OPTION AREA #2)

0003AF 75 Linear

OPTION COMBINATION CURB&GUTTER (OPTION AREA #2)

0003AG 50 Square

OPTION DRIVEWAY PAVEMENT (OPTION AREA #2)

0003AH 120 Square

OPTION SIDEWALK REMOVAL (OPTION AREA #2)

0003AJ 4 Each

OPTION FIRE HYDRANTS (OPTION AREA #2)

Fire Hydrants To Be Removed

0003AK 1 Each

OPTION REMOVE & ABANDON VALVE (OPTION AREA #2)

Remove And Abandon Valve Box

0003AL 1 Each

OPTION WATER MAIN, 8" (OPTION AREA #2)

0003AM 1 Each

OPTION 6" CUT AND CAP (OPTION AREA #2)

0003AN 1 Each

OPTION 8" CUT AND CAP (OPTION AREA #2)

0003AP 14 Linear

OPTION REMOVE&REPLACE 6" STORM (OPTION AREA #2)

Remove And Replace 6" Storm Sewer With Water Main Quality Pipe

0003AQ 41 Linear

OPTION REMOVE&REPLACE 12" STORM(OPTION AREA #2)

Remove And Replace 12" Storm Sewer With Water Main Quality Pipe

0003AR 34 Linear

OPTION REMOVE&REPLACE 18" STORM(OPTION AREA #2)

Remove And Replace 18" Storm Sewer With Water Main Quality Pipe

0003AS 1,134 Linear

OPTION DUCTILE IRON WATER MAIN (OPTION AREA #2)

0003AT 3 Each

OPTION FIRE HYDRANT ASSEMBLY (OPTION AREA #2)

Fire Hydrant Assembly Complete

0003AU 1 Each

OPTION 6"X6" TAPPING SLEEVE (OPTION AREA #2)

FFP

6" X 6" Tapping Sleeve And Valve In Valve Vault, Type A, 4' Diameter, Type 1

0003AV 1 Each

OPTION 8"X8" TAPPING SLEEVE (OPTION AREA #2)

FFP

0003AW 66 Linear

OPTION STEEL CASINGS 20" (OPTION AREA #2)

0003AX 57 Linear

OPTION STEEL CASING PIPE, 20" (OPTION AREA #2)

Steel Casing Pipe, Bored And Jacked, 20"

0003AY 1 Each

OPTION GATE VALVE 8" (OPTION AREA #2)

0003AZ 1 Each

OPTION 1" WATER SERVICE (SHORT)(OPTION AREA #2)

0003BA 15 Each

OPTION 1" WATER SERVICE (LONG) (OPTION AREA #2)

0003BB 1,680 Square

OPTION CLASS D PATCHES, 4 INCH (OPTION AREA #2)

0003BC 50 Square

OPTION HOT-MIX ASPHALT, 4" (OPTION AREA #2)

0003BD 120 Square

OPTION PORTLAND CEMENT 5 INCH (OPTION AREA #2)

0003BE 75 Linear

OPTION COMBINATION CURB&GUTTER (OPTION AREA #2)

0003BF 115 Square

OPTION SODDING, SALT TOLERANT (OPTION AREA #2)

0003BG 1 Lot

OPTION PERFORMANCE&PAYMENT BOND(OPTION AREA #2)

FFP

BONDS FOR OPTION AREA #2 BID ITEMS (LINE ITEMS 0003AA through

0003BF)

THIS IS A COST-REIMBURSABLE LINE ITEM - The government will reimburse the Contractor for the actual cost of acceptable performance and payment bonds, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the performance and payment bonds. If the actual cost of the bonds is less than the line item amount, the contract will modified to adjust the line item accordingly.

OPTION OPTION AREA #3 BID ITEMS

FFP

This a Parent Line Item identifying the option work that relates directly to its Sub- Line Items 0004AA through 0004BF; the Sub-Line Items themselves identify the the pricing at Sub-Line Items 0004AA through 0004BF.

0004AA 1 Job

OPTION TRAFFIC CONTROL (OPTION AREA #3)

0004AB 145 Linear

OPTION PERIMETER EROSION (OPTION AREA #3)

Perimeter Erosion Barrier

0004AC 81 Linear

OPTION PIPE PROTECTION (OPTION AREA #3)

0004AD 6 Each

OPTION INLET FILTERS (OPTION AREA #3)

0004AE 2 Each

OPTION TREE PROTECTION (OPTION AREA #3)

0004AF 984 Square

OPTION PAVEMENT REMOVAL (OPTION AREA #3)

0004AG 30 Linear

OPTION COMBINATION CURB&GUTTER (OPTION AREA #3)

0004AH 50 Square

OPTION DRIVEWAY PAVEMENT (OPTION AREA #3)

0004AJ 100 Square

OPTION SIDEWALK REMOVAL (OPTION AREA #3)

0004AK 3 Each

OPTION FIRE HYDRANTS (OPTION AREA #3)

Fire Hydrants To Be Removed

0004AL 1 Each

OPTION REMOVE&ABANDON VALVE BOX(OPTION AREA #3)

0004AM 1 Each

OPTION WATER MAIN, 8"(OPTION AREA #3)

0004AN 8 Each

OPTION SANITARY SEWER SERVICE (OPTION AREA #3)

Sanitary Sewer Service Adjustment

0004AP 1 Each

OPTION 6" CUT AND CAP (OPTION AREA #3)

0004AQ 2 Each

OPTION 8" CUT AND CAP (OPTION AREA #3)

0004AR 823 Linear

OPTION DUCTILE IRON WATER MAIN (OPTION AREA #3)

0004AS 4 Each

OPTION FIRE HYDRANT ASSEMBLY (OPTION AREA #3)

Fire Hydrant Assembly Complete

0004AT 1 Each

OPTION 8"X8" TAPPING SLEEVE (OPTION AREA #3)

FFP

0004AU 104 Linear

OPTION STEEL CASINGS 20" (OPTION AREA #3)

0004AV 31 Linear

OPTION STEEL CASING PIPE, 20" (OPTION AREA #3)

Steel Casing Pipe, Bored And Jacked, 20"

0004AW 8 Each

OPTION 1" WATER SERVICE (SHORT)(OPTION AREA #3)

0004AX 8 Each

OPTION 1" WATER SERVICE (LONG) (OPTION AREA #3)

0004AY 1 Each

OPTION MANHOLES (OPTION AREA #3)

Manholes To Be Reconstructed

0004AZ 984 Square

OPTION CLASS D PATCHES, 4 INCH (OPTION AREA #3)

0004BA 125 Square

OPTION HOT-MIX ASPHALT, 4" (OPTION AREA #3)

0004BB 100 Square

OPTION PORTLAND CEMENT 5 INCH (OPTION AREA #3)

0004BC 30 Linear

OPTION COMBINATION CURB&GUTTER (OPTION AREA #3)

0004BD 65 Square

OPTION SODDING, SALT TOLERANT (OPTION AREA #3)

0004BE 1 Each

OPTION GATE VALVE 8" IN (OPTION AREA #3)

0004BF 1 Lot

OPTION PERFORMANCE&PAYMENT BOND(OPTION AREA #3)

FFP

BONDS FOR OPTION AREA #3 BID ITEMS (LINE ITEMS 0004AA through 0004E)

THIS IS A COST-REIMBURSABLE LINE ITEM - The government will reimburse the Contractor for the actual cost of acceptable performance and payment bonds, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the performance and payment bonds. If the actual cost of the bonds is less than the line item amount, the contract will modified to adjust the line item accordingly.

SUMMATION OF BID PRICES:

BASE BID ITEMS (ITEMS 0001AA THROUGH 0001BF): $________________________

OPTION AREA #1 BID ITEMS (ITEMS 0002AA THROUGH 0002AX): $________________________

OPTION AREA #2 BID ITEMS (ITEMS 0003AA THROUGH 0003BG): $________________________

OPTION AREA #3 BID ITEMS (ITEMS 0004AA THROUGH 0004BF): $________________________

OVERALL BID PRICE (ITEMS 0001AA THROUGH 0004BF (INCLUDES ALL RESPECTIVE

SUBITEMS): $______________________

DEPARTMENT OF LABOR WAGE RATES – APPLICABLE TO WORK TO BE

PERFORMED UNDER THIS PROJECT

General Decision Number: IL180009 01/12/2018 IL9

Superseded General Decision Number: IL20170009

State: Illinois

Construction Types: Building, Heavy, Highway and Residential

County: Cook County in Illinois.

BUILDING, RESIDENTIAL, HEAVY, AND HIGHWAY PROJECTS (does not include landscape projects).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2018 1 01/12/2018

ASBE0017-001 06/01/2017

Rates Fringes

ASBESTOS WORKER/INSULATOR

Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems..........$ 50.50 25.80 Fire Stop Technician.............$ 40.40 24.54

HAZARDOUS MATERIAL HANDLER

includes preparation, wetting, stripping removal scrapping, vacuuming, bagging and disposal of all insulation materials, whether they contain asbestos or not, from mechanical systems..........$ 37.80 24.54

BOIL0001-001 05/01/2017

Rates Fringes

BOILERMAKER......................$ 46.18 29.58

BRIL0021-001 06/01/2016

Rates Fringes

BRICKLAYER.......................$ 44.88 26.62

BRIL0021-004 06/01/2017

Rates Fringes

Marble Mason.....................$ 44.63 26.83

BRIL0021-006 06/01/2017

Rates Fringes

TERRAZZO WORKER/SETTER...........$ 44.38 25.84

TILE FINISHER....................$ 38.56 22.10

TILE SETTER......................$ 45.49 25.72

BRIL0021-009 06/01/2017

Rates Fringes

MARBLE FINISHER..................$ 33.95 26.03

BRIL0021-012 06/01/2017

Rates Fringes

Pointer, cleaner and caulker.....$ 45.42 24.06

CARP0555-001 06/01/2017

BUILDING, HEAVY, AND HIGHWAY

Rates Fringes

CARPENTER

Carpenter, Lather, Millwright, Piledriver, and Soft Floor Layer

Building...................$ 46.35 31.29 Heavy & Highway............$ 46.35 31.31

CARP0555-002 10/01/2017

RESIDENTIAL CONSTRUCTION

Rates Fringes

CARPENTER........................$ 37.11 31.29

ELEC0009-003 06/04/2017

Rates Fringes

Line Construction Groundman...................$ 39.39 61.37% Lineman and Equipment Operator....................$ 50.50 61.37%

ELEC0134-001 06/05/2017

Rates Fringes

ELECTRICIAN......................$ 47.40 32.21

ELEC0134-003 06/05/2017

Rates Fringes

ELECTRICIAN

ELECTRICAL TECHNICIAN.......$ 43.10 23.95

The work shall consist of the installation, operation, inspection, maintenance, repair and service of radio, television, recording, voice sound vision production and reproduction, telephone and telephone interconnect, facsimile, data appatatus, coaxial, fibre optic and wireless equipment, appliances and systems used for the transmission and reception of signals of any nature, business, domestic, commercial, education, entertainment and residential purposes, including but not limited to communication and telephone, electronic and sound equipment, fibre optic and data communication systems, and the performance of any task directly related to such installation or service whether at new or existing sites, such tasks to include the placing of wire and cable and electrical power conduit or other raceway work within the equipment room and pulling wire and/or cable through conduit and the installation of any incidential conduit.

* ELEV0002-001 01/01/2018

Rates Fringes

ELEVATOR MECHANIC................$ 54.85 32.645+a+b

FOOTNOTES:

a) PAID HOLIDAYS: New Year's Day; Memorial Day; Independence Day; Labor Day; Thanksgiving Day; Day after Thanksgiving Day; Veterans' Day and Christmas Day.

b) Employer contributes 8% of regular hourly rate as vacation pay credit for employee with more than 5 years of service, and 6% for employee with less than 5 years service

* ENGI0150-006 06/01/2017

Building and Residential Construction

Rates Fringes

OPERATOR: Power Equipment

GROUP 1....................$ 50.10 36.45

GROUP 2....................$ 48.80 36.45

GROUP 3....................$ 46.25 36.45

GROUP 4....................$ 44.50 36.45

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Mechanic; Asphalt Plant*; Asphalt Spreader;

Autograde*; Backhoes with Caisson attachment*:Batch Plant*;

Benoto(Requires two Engineers); Boiler and Throttle Valve;

Caisson Rigs*; Central Redi-Mix Plant*; Combination Backhoe Front Endloader Machine; Compressor and Throttle Valve;

Concrete Breaker (Truck Mounted)*; Concrete Conveyor;

Concrete Conveyor, Truck Mounted; Concrete Paver over 27E

cu. ft.*; Concrete Paver 27E cu ft and Under*; Concrete Placer*; Concrete Placing Boom; Concrete Pump (Truck Mounted); Concrete Tower; Cranes*; Cranes, Hammerhead*;

Cranes, (GCI and similar type Requires two operators only);

Creter Crane; Crusher, Stone, etc; Derricks; Derricks, Traveling*; Formless Curb and Gutter Machine*; Grader, Elevating; Grouting Machines; Highlift Shovels or Front Endloader 2 1/4 yd. and over; Hoists, Elevators, Outside Type Rack and pinion and similar Machines; Hoists, One, Two, and Three Drum; Hoists, Two Tugger One Floor;

Hydraulic Backhoes*; Hydraulic Boom Trucks; Hydraulic Vac (and similar equipment);Locomotives; Motor Patrol*; Pile Drivers amd Skid Rig*; Post Hole Digger; Pre- Stress Machine; Pump Cretes Dual Ram(Requiring frequent Lubrication and Water); Pump Cretes; Squeeze Cretes-Screw Type Pumps Gypsum Bulker and Pump; Raised and Blind Hole Drill*; Roto Mill Grinder (36" and Over)*; Roto Mill Grinder (Less Than 36")*; Scoops-Tractor Drawn; Slip-Form Paver*; Straddle Buggies; Tournapull; Tractor with Boom, and Side Boom; and Trenching Machines*.

GROUP 2: Bobcat (over 3/4 cu yd); Boilers; Broom, Power Propelled; Bulldozers; Concrete Mixer (Two Bag and over);

Conveyor, Portable; Forklift Trucks; Greaser Engineer;

Highlift Shovels or Front End loaders under 2 1/4 cu yd;

Aotomatic Hoists, Hoists, Inside Elevators; Hoists, Sewer Dragging Machine; Hoists, Tugger Single Drum; Laser Screed;

Rock Drill (Self-Propelled); Rock Drill (Truck Mounted)*;

Rollers; Steam Generators; Tractors; Tractor Drawn Vibratory Roller (Receives an additional $.50 per hour);

Winch Trucks with "A" Frame.

GROUP 3: Air Compressor-Small 250 and Under (1 to 5 not to exceed a total of 300 ft); Air Compressor-Large over 250;

Combination-Small Equipment Operator; Generator- Small 50 kw and under; Generator-Large over 50 kw; Heaters, Mechanical; Hoists, Inside Elevators (Remodeling or Renovatin work); Hydrualic Power Units (Pile Driving, Extracting, and Drilling); Low Boys; Pumps Over 3" (1 To 3 not to exceed a total of 300 ft); Pumps, Well Points;

Welding Machines (2 through 5); Winches, 4 Small Electric Drill Winches; Bobcat (up to and including 3/4 cu yd)

GROUP 4 - Bobcats and/or other Skid Steer Loaders; Brick Forklifts; Oilers

*-Requires Oiler

* ENGI0150-025 06/01/2017

Heavy and Highway Construction

Rates Fringes

OPERATOR: Power Equipment

GROUP 1.....................$ 48.30 36.45

GROUP 2.....................$ 47.75 36.45

GROUP 3.....................$ 45.70 36.45

GROUP 4.....................$ 44.30 36.45

GROUP 5.....................$ 43.10 36.45

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Asphalt Plant*; Asphalt Heater and Planer combination; Asphalt Heater Scarfire*, Asphalt Spreader;

Autograder/ GOMACO or similar; ABG Paver*, Backhoes with Caisson attachment*, Ballast Regulator, Belt Loader*;

Caisson Rigs*Car Dumper, Central Redi-Mix Plant*, Combination Backhoe; Front End Loader Machine (1 cu yd or over Backhoe bucket or with attachments); Concrete Breaker (truck mounted); Concrete Conveyor; Concrete Paver over 27E cu ft*; Concrete Placer*; Concrete Tube Float; Cranes, all attachments*; Cranes, Hammerhead, Linden, Peco and machines of a like nature*; Creter Crane; Crusher, stone; All

Derricks; Derrick Boats; Derricks, traveling*; Dowell Machine with Air Compressor ($1.00 above Class 1);

Dredges*; Field Mechanic Welder; Formless Curb and Gutter Machine*; Gradall and machines of a like nature*; Grader, Elevating; Grader, Motor Grader, Motor Patrol, Auto Patrol, Form Grader, Pull Grader, Subgrader; Guard Rail Post Driver mounted*; Hoists, one, two, and three Drum; Hydraulic Backhoes*; Backhoes with Shear attachments*; Mucking Machine; Pile Drivers and Skid Rig*; Pre-Stress Machine;

Pump Cretes Dual Ram (requires frequent lubrication and water)*; Rock Drill- Crawler or Skid Rig*; Rock Drill truck mounted*; Rock/ Track Tamper; Roto Mill Grinder, (36" and over)*; Slip-Form Paver*; Soil Test Drill Rig, truck mounted*; Straddle Buggies; Hydraulic Telescoping Form (tunnel); Tractor Drawn Belt Loader*; Tractor Drawn Belt Loader with attached Pusher (two engineers); Tractor with boom; Tractaire with attachment; Traffic Barrier Transfer Machine*; Trenching Machine; Truck Mounted Concrete Pump with boom*; Underground Boring and/or Mining Machines 5 ft in diameter and over tunnel, etc.*; Wheel Excavator* & Widener (Apsco); Raised or Blind Hoe Drill, Tunnel & Shaft*

GROUP 2: Batch Plant*; Bituminous Mixer; Boiler and Throttle Valve; Bulldozer; Car Loader Trailing Conveyors;

Combination Backkhoe Front End Loader Machine, (less than 1 cu yd Backhoe Bucket with attachments); Compressor and Throttle Valve; Compressor, common receiver (3); Concrete Breaker or Hydro Hammer; Concrete Grinding Machine;

Concrete Mixer or Paver 7S series to and including 27 cu ft; Concrete Spreader; Concrete Curing Machine; Burlap Machine; Belting Machine and Sealing Machine; Concrete Wheel Saw; Conveyor Muck Cars (Haglund or similar type);

Drills (all); Finishing Machine-Concrete; Greaser Engineer;

Highlift Shovels or Front End Loader; Hoist- Sewer Dragging Machine; Hydraulic Boom Trucks, all attachments;

Hydro-Blaster (requires two operators); Laser Screed*;

Locomotives, Dinky; Off-Road Hauling Units (including articulating); Pump Cretes; Squeeze Cretes-Screw Type pumps, Gypsum Bulker and Pump; Roller Asphalt; Rotary Snow Plows; Rototiller, Seaman, self-Propelled; Scoops-Tractor Drawn; Self- propelled Compactor; Spreader-Chip-Stone;

Scraper; Scraper-Prime Mover in Tandem regardless of size (add $1.00 to Group 2 hourly rate for each hour and for each machine attached thereto add $1.00 to Group 2 hourly rate for each hour); Tank Car Heater; Tractors, Push, pulling Sheeps Foot, Disc, or Compactor, etc; Tug Boats

GROUP 3: Boilers; Brooms, all power propelled; Cement Supply Tender; Compressor, Common Receiver (2); Concrete Mixer, two bag and over; Conveyor, Portable; Farm type Tractors used for mowing, seeding, etc; Fireman on Boilers; Forklift Trucks; Grouting Machines; Hoists, Automatic; Hoists, all Elevators; Hoists, Tugger single Drum; Jeep Diggers; Low Boys; Pipe Jacking Machines; Post-hole Digger; Power Saw, Concrete, Power Driven; Pug Mills; Rollers, other than asphalt; Seed and Straw Blower; Steam Generators; Stump Machine; Winch Trucks with A-Frame; Work Boats; Tamper-Form motor driven

GROUP 4: Air compressor - Small 250 and under (1 to 5 not to exceed a total of 300 ft); Air Compressor - Large over 250;

Combination - Small Equipment Operator; Directional Boring Machine; Generators - Small 50 kw and under; Generators - Large , over 50 kw; Heaters, Mechanical; Hydraulic power unit (Pile Driving, Extracting or Drilling); Light Plants (1 to 5); Pumps, over 3" (1 to 3, not to exceed a total of 300 ft); Pumps, Well Points; Tractaire; Welding Machines (2 through 5); Winches, 4 small electric drill winches;

GROUP 5: Bobcats (All); Brick Forklifts; Oilers; Directional Boring

*Requires Oiler

IRON0001-026 06/01/2017

Rates Fringes

IRONWORKER

Sheeter.....................$ 47.58 37.34 Structural and Reinforcing..$ 47.33 37.34

IRON0063-001 06/01/2017

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 46.75 34.44

IRON0063-002 06/01/2017

Rates Fringes

IRONWORKER

Fence Erector...............$ 39.58 27.70

IRON0136-001 07/01/2017

Rates Fringes

IRONWORKER

Machinery Movers; Riggers;

Macinery Erectors...........$ 40.17 33.04 Master Riggers..............$ 42.67 33.04

LABO0002-006 06/01/2017

LABORER (BUILDING &

RESIDENTIAL)

GROUP 1....................$ 41.20 27.47

GROUP 2....................$ 41.20 27.47

GROUP 3....................$ 41.28 27.47

GROUP 4....................$ 41.30 27.47

GROUP 5....................$ 41.40 27.47

GROUP 6....................$ 41.40 27.47

GROUP 7....................$ 41.43 27.47

GROUP 8....................$ 41.53 27.47

GROUP 9....................$ 41.55 27.47

GROUP 10....................$ 41.75 27.47

GROUP 11....................$ 41.78 27.47

GROUP 12....................$ 41.40 27.47

LABORER CLASSIFICATIONS

GROUP 1: Building Laborers; Plasterer Tenders; Pumps for Dewatering; and other unclassified laborers.

GROUP 2: Fireproofing and Fire Shop laborers.

GROUP 3: Cement Gun.

GROUP 4: Chimney over 40 ft.; Scaffold Laborers.

GROUP 5: Cement Gun Nozzle Laborers (Gunite); Windlass and capstan person.

GROUP 6: Stone Derrickmen & Handlers.

GROUP 7: Jackhammermen; Power driven concrete saws; and other power tools.

GROUP 8: Firebrick & Boiler Laborers.

GROUP 9: Chimney on fire brick; Caisson diggers; & Well Point System men.

GROUP 10: Boiler Setter Plastic Laborers.

GROUP 11: Jackhammermen on fire brick work only.

GROUP 12: Dosimeter use (any device) monitoring nuclear exposure); Asbestos Abatement Laborer; Toxic and Hazardous Waste Removal Laborers.

LABO0002-007 06/01/2017

Rates Fringes

LABORER (HEAVY & HIGHWAY)

GROUP 1.....................$ 41.20 27.47

GROUP 2.....................$ 41.28 27.47

GROUP 3.....................$ 41.40 27.47

GROUP 4.....................$ 41.43 27.47

GROUP 5.....................$ 41.40 27.47

LABORER CLASSIFICATIONS

GROUP 1: Common laborer; Tenders; Material expeditor (asphalt plant); Street paving, Grade separation, sidewalk, curb & gutter, strippers & All laborers not otherwise mentioned

GROUP 2: Ashpalt tampers & smoothers; Cement gun laborers

GROUP 3: Cement Gun Nozzle (laborers), Gunite

GROUP 4: Rakers, Lutemen; Machine-Screwmen; Kettlemen;

Mixermen; Drun-men; Jackhammermen (asphalt); Paintmen;

Mitre box spreaders; Laborers on birch, overman and similar spreader equipment; Laborers on APSCO; Laborers on air compressor; Paving Form Setter; Jackhammermen (concrete);

Power drive concrete saws; other power tools.

GROUP 5: Asbestos Abatement Laborers; Toxic and Hazardous Waste Removal Laborers, Dosimeter (any device) monitoring nuclear exposure

LABO0002-008 06/01/2017

Rates Fringes

LABORER (Compressed Air)

0 - 15 POUNDS...............$ 42.20 27.47

16 - 20 POUNDS..............$ 42.70 27.47

21 - 26 POUNDS..............$ 43.20 27.47

27 - 33 POUNDS..............$ 44.20 27.47

34 - AND OVER...............$ 45.20 27.47

LABORER (Tunnel and Sewer)

GROUP 1.....................$ 41.20 27.47

GROUP 2.....................$ 41.33 27.47

GROUP 3.....................$ 41.43 27.47

GROUP 4.....................$ 41.55 27.47

GROUP 5.....................$ 41.20 27.47

LABORER CLASSIFICATIONS (TUNNEL)

GROUP 1: Cage tenders; Dumpmen; Flagmen; Signalmen; Top laborers

GROUP 2: Air hoist operator; Key board operator; concrete laborer; Grout; Lock tenders (Free Air Side); Steel setters; Tuggers; Switchmen; Car pusher

GROUP 3: Concrete repairmen; Lock tenders (pressure side);

Mortar men; Muckers; Grout machine operators; Track layers

GROUP 4: Air trac drill operator; Miner; Bricklayer tenders;

Concrete blower operator; Drillers; Dynamiters; Erector operator; Form men; Jackhammermen; Powerpac; Mining machine operators; Mucking machine operator; Laser beam operator;

Liner plate and ring setters; Shield drivers; Power knife operator; Welder- burners; Pipe jacking machine operator;

skinners; Maintenance technician

GROUP 5: Asbestos abatement laborer; Toxic and hazardous waste removal laborer; Dosimeter (any device) monitoring nuclear exposure

LABORER CLASSIFICATIONS (SEWER)

GROUP 1: Signalmen; Top laborers and All other laborers

GROUP 2: Concrete laborers and Steel setters

GROUP 3: Cement carriers; Cement mixers; Concrete repairmen;

Mortar men; Scaffold men; Second Bottom men

GROUP 4: Air trac drill operator; Bottom men;

Bracers-bracing; Bricklayer tenders; Catch basin diggers;

Drainlayers; dynamiters; Form men; Jackhammermen; Powerpac;

Pipelayers; Rodders; Welder-burners; Well point systems men

GROUP 5: Asbestos abatement laborer, Toxic and hazardous waste removal laborer; Dosimeter (any device) monitoring nuclear exposure

LABO0225-001 06/01/2017

Rates Fringes

LABORER (DEMOLITION/WRECKING)

GROUP 1.....................$ 36.00 27.47

GROUP 2.....................$ 41.40 27.47

GROUP 3.....................$ 41.40 27.47

LABORER CLASSIFICATIONS

GROUP 1 - Complete Demolition

GROUP 2 - Interior Wrecking and Strip Out Work

GROUP 3 - Asbestos Work with Complete Demolition/Wrecking or Strip Out Work

PAIN0014-001 06/01/2017

PAINTER (including taper)........$ 44.55 26.49

PAIN0027-001 06/01/2017

Rates Fringes

GLAZIER..........................$ 42.45 34.18

PLAS0005-002 07/01/2015

Rates Fringes

PLASTERER........................$ 42.25 26.65

PLAS0502-001 06/01/2017

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 44.25 32.18

PLUM0130-001 06/01/2017

Rates Fringes

PLUMBER..........................$ 49.25 28.97

PLUM0597-002 06/01/2017

Rates Fringes

PIPEFITTER.......................$ 47.50 30.02

* ROOF0011-001 12/01/2017

Rates Fringes

ROOFER...........................$ 42.30 22.75

SFIL0281-001 06/01/2017

Rates Fringes

SPRINKLER FITTER.................$ 48.30 26.85

SHEE0073-001 07/01/2017

Rates Fringes

Sheet Metal Worker...............$ 43.50 35.42

SHEE0073-002 07/01/2017

Rates Fringes

Sheet Metal Worker

ALUMINUM GUTTER WORK........$ 30.57 35.42

TEAM0731-001 06/01/2017

COOK COUNTY - HEAVY AND HIGHWAY

Rates Fringes

TRUCK DRIVER

2 or 3 Axles................$ 35.60 22.10 4 Axles.....................$ 35.85 22.10 5 Axles.....................$ 36.05 22.10 6 Axles.....................$ 36.25 22.10

FOOTNOTES:

A. Paid Holidays: New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, and Christmas Day.

B. 900 straight time hours or more in 1 calendar year for the same employer shall receive 1 week paid vacation; 3 years - 2 weeks paid vacation; 10 years - 3 weeks paid vacation; 20 years - 4 weeks paid vacation.

C. An additional $.20 per axle shall be paid for all vehicles with more than six (6) axles.

TEAM0731-002 03/01/2012

Rates Fringes

Traffic Control Device Monitor

TRAFFIC SAFETY WORKER:

Primary duties include but are not limited to the delivery, maintenance and pick-up of traffic control devices, the set-up and installation of traffic signs, pavement markings, barricades, crash barrels and glare screens, traffic control surveillance, the repair and maintenance trucks, cars, arrow boards, message signs, barricade and sign fabrication equipment.......$ 28.25 9.08

TEAM0786-001 06/01/2017

COOK COUNTY - BUILDING AND RESIDENTIAL

TRUCK DRIVER

2 & 3 Axles.................$ 39.942 0.25+a 4 Axles.....................$ 39.75 0.25+a 5 Axles.....................$ 39.967 0.25+a 6 Axles.....................$ 40.184 0.25+a

FOOTNOTES:

a. $719.00 per week.

An additional $.20 per axle shall be paid for all vehicles with more than six (6) axles.

Paid Holidays: New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, and Christmas Day.

900 straight time hours or more in 1 calendar year for the same employer shall receive 1 week paid vacation; 3 years - 2 weeks paid vacation; 10 years - 3 weeks paid vacation; 20 years - 4 weeks paid vacation.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

Wat er Mai n Repl acement W912P618B0003

SECTI ON TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

SECTI ON 01 22 00. 00 10

PRI CE AND PAYMENT PROCEDURES

08/15

PART 1 GENERAL

1. 1 SUBMI TTALS

1. 2 SI NGLE JOB PAYMENT I TEMS

1. 2. 1 Mobi l i zat i on ( Base Bi d I t em 0001AA) and Demobi l i zat i on ( Base

Bi d I t em 0001AB)

1. 2. 1. 1 Payment

1. 2. 1. 2 Uni t of Measur e

1. 2. 2 Tr af f i c Cont r ol ( Base Bi d I t em 0001AC, Opt i on Bi d I t em 0002AA, Opt i on Bi d I t em 0003AA, and Opt i on Bi d I t em 0004AA)

1. 2. 2. 1 Payment

1. 2. 2. 2 Uni t of Measur e

1. 2. 3 Per f or mance and Payment Bonds ( Base Bi d I t em 0001BF, Opt i on Bi d

I t em 0002AX, Opt i on Bi d I t em 0003BG, and Opt i on Bi d I t em 0004BF)

1. 2. 3. 1 Payment

1. 2. 3. 2 Uni t of Measur e

1. 3 UNI T PRI CE PAYMENT I TEMS

1. 3. 1 I nl et Fi l t er s ( Base Bi d I t em 0001AD, Opt i on Bi d I t em 0002AB, Opt i on Bi d I t em 0003AD, and Opt i on Bi d I t em 0004AD)

1. 3. 1. 1 Payment

1. 3. 1. 2 Measur ement

1. 3. 1. 3 Uni t of Measur e

1. 3. 2 Tr ee Pr ot ect i on ( Base Bi d I t em 0001AE and Opt i on Bi d I t em

0004AE)

1. 3. 2. 1 Payment

1. 3. 2. 2 Measur ement

1. 3. 2. 3 Uni t of Measur e

1. 3. 3 Pi pe Pr ot ect i on ( Opt i on Bi d I t em 0003AC and Opt i on Bi d I t em

0004AC)

1. 3. 3. 1 Payment

1. 3. 3. 2 Measur ement

1. 3. 3. 3 Uni t of Measur e

1. 3. 4 Per i met er Er osi on Bar r i er ( Opt i on Bi d I t em 0003AB and Opt i on

Bi d I t em 0004AB)

1. 3. 4. 1 Payment

1. 3. 4. 2 Measur ement

1. 3. 4. 3 Uni t of Measur e

1. 3. 5 Pavement Removal ( Base Bi d I t em 0001AF, Opt i on Bi d I t em 0002AC, Opt i on Bi d I t em 0003AE, and Opt i on Bi d I t em 0004AF)

1. 3. 5. 1 Payment

1. 3. 5. 2 Measur ement

1. 3. 5. 3 Uni t of Measur e

1. 3. 6 Combi nat i on Cur b and Gut t er Removal ( Base Bi d I t em 0001AG, Opt i on Bi d I t em 0002AD, Opt i on Bi d I t em 0003AF, and Opt i on Bi d I t em 0004AG)

1. 3. 6. 1 Payment

SECTI ON 01 22 00. 00 10 Page 1

AMD 0003 - 01/ 16/ 18

1. 3. 6. 2 Measur ement

1. 3. 6. 3 Uni t of Measur e

1. 3. 7 Dr i veway Pavement Removal ( Base Bi d I t em 0001AH, Opt i on Bi d I t em

0002AE, Opt i on Bi d I t em 0003AG, and Opt i on Bi d I t em 0004AH)

1. 3. 7. 1 Payment

1. 3. 7. 2 Measur ement

1. 3. 7. 3 Uni t of Measur e

1. 3. 8 Si dewal k Removal ( Base Bi d I t em 0001AJ, Opt i on Bi d I t em 0002AF, Opt i on Bi d I t em 0003AH, and Opt i on Bi d I t em 0004AJ)

1. 3. 8. 1 Payment

1. 3. 8. 2 Measur ement

1. 3. 8. 3 Uni t of Measur e

1. 3. 9 Fi r e Hydr ant s To Be Removed ( Base Bi d I t em 0001AK, Opt i on Bi d

I t em 0003AJ, and Opt i on Bi d I t em 0004AK)

1. 3. 9. 1 Payment

1. 3. 9. 2 Measur ement

1. 3. 9. 3 Uni t of Measur e

1. 3. 10 Remove and Abandon Val ve Box ( Base Bi d I t em 0001AL, Opt i on Bi d

I t em 0002AG, Opt i on Bi d I t em 0003AK, and Opt i on Bi d I t em 0004AL)

1. 3. 10. 1 Payment

1. 3. 10. 2 Measur ement

1. 3. 10. 3 Uni t of Measur e

1. 3. 11 Wat er Mai n To Be Abandoned, Si x- I nch ( Base Bi d I t em 0001AM)

1. 3. 11. 1 Payment

1. 3. 11. 2 Measur ement

1. 3. 11. 3 Uni t of Measur e

1. 3. 12 Wat er Mai n To Be Abandoned, Ei ght - I nch ( Opt i on Bi d I t em

0002AH, Opt i on Bi d I t em 0003AL, and Opt i on Bi d I t em 0004AM)

1. 3. 12. 1 Payment

1. 3. 12. 2 Measur ement

1. 3. 12. 3 Uni t of Measur e

1. 3. 13 Sani t ar y Sewer Ser vi ce Adj ust ment ( Base Bi d I t em 0001AN, Opt i on Bi d I t em 0002AJ, and Opt i on Bi d I t em 0004AN)

1. 3. 13. 1 Payment

1. 3. 13. 2 Measur ement

1. 3. 13. 3 Uni t of Measur e

1. 3. 14 Si x- I nch Cut and Cap ( Base Bi d I t em 0001AP, Opt i on Bi d I t em

0002AK, Opt i on Bi d I t em 0003AM, and Opt i on Bi d I t em 0004AP)

1. 3. 14. 1 Payment

1. 3. 14. 2 Measur ement

1. 3. 14. 3 Uni t of Measur e

1. 3. 15 Ei ght - I nch Cut and Cap ( Base Bi d I t em 0001AQ, Opt i on Bi d I t em

0003AN, and Opt i on Bi d I t em 0004AQ)

1. 3. 15. 1 Payment

1. 3. 15. 2 Measur ement

1. 3. 15. 3 Uni t of Measur e

1. 3. 16 Remove and Repl ace Si x- I nch St or m Sewer Wi t h Wat er Mai n

Qual i t y Pi pe ( Opt i on Bi d I t em 0003AP)

1. 3. 16. 1 Payment

1. 3. 16. 2 Measur ement

1. 3. 16. 3 Uni t of Measur e

1. 3. 17 Remove and Repl ace 12- I nch St or m Sewer Wi t h Wat er Mai n Qual i t y

Pi pe ( Opt i on Bi d I t em 0003AQ)

1. 3. 17. 1 Payment

1. 3. 17. 2 Measur ement

1. 3. 17. 3 Uni t of Measur e

1. 3. 18 Remove and Repl ace 18- I nch St or m Sewer Wi t h Wat er Mai n Qual i t y

Pi pe ( Opt i on Bi d I t em 0003AR)

1. 3. 18. 1 Payment

SECTI ON 01 22 00. 00 10 Page 2

1. 3. 18. 2 Measur ement

1. 3. 18. 3 Uni t of Measur e

1. 3. 19 Duct i l e I r on Wat er Mai n, Cl ass 52 Wi t h Pol yet hyl ene Encasement

Ei ght - I nch ( Base Bi d I t em 0001AR, Opt i on Bi d I t em 0002AL, Opt i on Bi d I t em 0003AS, and Opt i on Bi d I t em 0004AR)

1. 3. 19. 1 Payment

1. 3. 19. 2 Measur ement

1. 3. 19. 3 Uni t of Measur e

1. 3. 20 Fi r e Hydr ant Assembl y Compl et e ( Base Bi d I t em 0001AS, Opt i on

Bi d I t em 0003AT, and Opt i on Bi d I t em 0004AS)

1. 3. 20. 1 Payment