Request For Proposal (W912P520R0120).pdf

REPLY TO

ATTENTION OF

DEPARTMENT OF THE ARMY

NASHVILLE DISTRICT, CORPS OF ENGINEERS

110 9th AVENUE SOUTH, ROOM A-405

NASHVILLE, TENNESSEE 370202-1070

CELRN-RC-N 10 January 2020

ENVIRONET, INC.

T&T CONSTRUCTION ENTERPRISES LLC

Q.B.S., INC.

SAF, INC.

FORTIS NETWORKS, INC.

Dear MATOC Contractors:

Reference is made to your Indefinite Delivery Indefinite Quantity Contracts, Numbers W912QR- 15-D-0019 through W912QR-15-D-0023, Multiple Award Task Order Contracts for Perform Design/Build, Operations & Maintenance, and Construction Activities for Civil and Military Projects within the Great Lakes and Ohio River Division Mission Boundaries.

We request you submit a price proposal for the National Park Service (NPS) Big Creek Road Stabilization, as detailed in the scope of work, and posted on the government wide point of entry website at www.Beta.SAM.gov The documents are available for download on the beta.sam website only. The RFP can be found by logging into the website as a vendor and searching on the solicitation number (W912P520R0120). The cost range is between $100,000 and $250,000.

PLEASE NOTE: THIS IS FOR DESIGN AND CONSTRUCTION.

The basis for award of this task order is lowest evaluated price. Please complete the price breakout schedule, and include a labor category table demonstrating the use of the binding rates included in your MATOC contract. The submitted price breakdown should include sufficient detail to allow the Government to verify that your proposed price incorporates the binding rates from your base contract. Any level of effort shown in the submitted information will not be used for evaluation purposes and will be used only to ensure that the proposal is in compliance with the binding rates from the base contract.

Offerors shall allow for Government acceptance of proposals for 60 calendar days from the date proposals are due. Any proposal that does not allow acceptance for 60 days will not be considered and will be rejected.

An organized site visit has been scheduled for 29 January 2020 at 1100 A.M. Eastern Time see FAR provision 52.236-27 Alt 1 -- Site Visit (Construction) for additional information.

Proposals are due no later than 18 February 2020 at 11:00 A.M. Central Time. Submit your proposal by email to Fannie Robertson at Fannie.M.Robertson@usace.army.mil proposals not received by the stated date/time will not be considered. Please acknowledge receipt of this RFP by signing below in the space provided and returning to Fannie Robertson via email.

Payment and Performance Bonds will be required for this project. The Notice to Proceed will be issued after receipt and approval of the bonds.

-2-

All questions regarding this Request for Proposal (RFP) must be submitted via email to fannie.m.robertson@usace.army.mil. no later than 4 February 2020 at 1:00 PM Central Time.

If you have contractual questions, please contact Fannie Robertson at the email address provided above. If an Offeror believes that the requirements in the RFP contains an error, omission, or are otherwise unsound; the offeror shall immediately notify the Contract Specialist in writing with supporting rationale. The Offeror is reminded that the Government reserves the right to award this RFP based on the initial proposals, as received, without discussions.

Sincerely, Jessica L. Baker Contracting Officer

(Signature) (Date)

(Printed Name)

(Firm Name)

Enclosures:

Price Breakout Schedule Clauses and Provisions

Attachments:

Scope of work SOW attachment 1-McCreary County Raw Water Intake Drawings SOW attachment2-MCWD Big South Fork RW Intake 1007136

-3-

PRICE BREAKOUT SCHEDULE

Line Item

Number

Description Unit Amount

BASE PROPOSAL

0001 Design: All work and labor required to design the repair of Big Creek Road.

Job $_____________

0002 Mobilization: Site mobilization to accomplish the work.

Job $_____________

0003 Construction: All work, materials, and labor required to repair Big Creek Road.

Job $_____________

0004 Demobilization: Removal of equipment, excess materials, waste, and restoration of site to original conditions.

Job $_____________

0005 As-built / Record Drawings: Production and delivery of as-built record drawings of work performed.

Job $_____________

Total Base: $_________________

OPTION

1001 Geotechnical Investigations: All work, materials, and labor required to provide assessments of the roadway and failure locations within the construction area

Job

Total Option: $

TOTAL PROPOSAL

(Base plus option):

NOTES FOR PRICE BREAKOUT SCHEDULE

NOTE NO. 1. To better facilitate the receipt and proposal process, all modifications to proposals are to be submitted on copies of the latest Price Breakout Schedules as published in the solicitation or the latest amendment thereto. In lieu of indicating additions/deductions to line items, all Offerors should state their revised prices for each item.

NOTE NO. 2. Offerors must insert a price on all numbered items of the Price Breakout Schedule.

Failure to do so may result in the offer being unacceptable.

NOTE NO. 3. The award will be made to the lowest price Offeror.

-4-

NOTE NO. 4. The Option shall be awarded within 90 calendar days from Notice to Proceed.

Award of the option will not extend the period of performance.

--END OF PRICE BREAKOUT SCHEDULE—

CLAUSES AND PROVISIONS

52.211-10 Commencement, Prosecution, and Completion of Work (Apr 1984)

The Contractor shall be required to

(a) commence work under this contract within 10 calendar days from the issuance of Notice to Proceed

(b) prosecute the work diligently, and

(c) complete the entire work ready for use not later than 210 calendar days FROM the issuance of Notice to Proceed. The time stated for completion shall include final cleanup of the premises.

(End of Clause)

52.211-12 Liquidated Damages -- Construction (Sept 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of $509.00 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor’s right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

52.217-5 Evaluation of Options (Jul 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

(End of Provision)

52.217-7 Option for Increased Quantity -- Separately Priced Line Item (Mar 1989)

-5-

The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within 90 calendar days from Notice to Proceed. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree.

52.236-4 Physical Data (Apr 1984)

Data and information furnished or referred to below is for the Contractor’s information. The Government shall not be responsible for any interpretation of or conclusion drawn from the data or information by the Contractor.

(a) The indications of physical conditions on the drawings and in the specifications are the result of site investigations by others.

(b) Weather conditions. The Contractor shall make his own investigations as to weather conditions at the site. Data may be obtained from various National Weather Service offices located generally at airports of principal cities. The closest city is Louisville, KY.

(c) Transportation facilities. Access ways shall be investigated by the Contractor to satisfy himself as to their existence and allowable use. Roads and railroads in the general area are shown on the attachments.

(d) Historical data for all areas may be obtained from

U. S. Department of Commerce National Climatic Center Federal Building Asheville, N. C. 28801

52.236-27 Alt 1 -- Site Visit (Construction) (Feb 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for 29 January 2020 at 1100 A.M. Eastern Time

(c) Participants will meet in the parking lot of the Flat Rock Ridge Missionary Baptist Church located at 55 Flat Rock Ridge-Christian Cemetery Rd. Participants will then convoy in their own vehicle to the site. Vehicles capable of traveling over gravel forest roads are

-6-recommended.

POC: Greg Bishop 615-509-7136 (Mobile) 615-736-7635 (Office)

(End of Provision)

-7-

52.246-21 Warranty of Construction (Mar 1994)

(a) In addition to any other warranties in this contract, the Contractor warrants, except as provided in paragraph (i) of this clause, that work performed under this contract conforms to the contract requirements and is free of any defect in equipment, material, or design furnished, or workmanship performed by the Contractor or any subcontractor or supplier at any tier.

(b) This warranty shall continue for a period of 1 year from the date of final acceptance of the work. If the Government takes possession of any part of the work before final acceptance, this warranty shall continue for a period of 1 year from the date the Government takes possession.

(c) The Contractor shall remedy at the Contractor’s expense any failure to conform, or any defect. In addition, the Contractor shall remedy at the Contractor’s expense any damage to Government-owned or controlled real or personal property, when that damage is the result of --

(1) The Contractor’s failure to conform to contract requirements; or

(2) Any defect of equipment, material, workmanship, or design furnished.

(d) The Contractor shall restore any work damaged in fulfilling the terms and conditions of this clause. The Contractor’s warranty with respect to work repaired or replaced will run for 1 year from the date of repair or replacement.

(e) The Contracting Officer shall notify the Contractor, in writing, within a reasonable time after the discovery of any failure, defect, or damage.

(f) If the Contractor fails to remedy any failure, defect, or damage within a reasonable time after receipt of notice, the Government shall have the right to replace, repair, or otherwise remedy the failure, defect, or damage at the Contractor’s expense.

(g) With respect to all warranties, express or implied, from subcontractors, manufacturers, or suppliers for work performed and materials furnished under this contract, the Contractor shall --

(1) Obtain all warranties that would be given in normal commercial practice;

(2) Require all warranties to be executed, in writing, for the benefit of the Government, if directed by the Contracting Officer; and

(3) Enforce all warranties for the benefit of the Government, if directed by the Contracting Officer.

(h) In the event the Contractor’s warranty under paragraph (b) of this clause has expired, the Government may bring suit at its expense to enforce a subcontractor’s, manufacturer’s, or supplier’s warranty.

(i) Unless a defect is caused by the negligence of the Contractor or subcontractor or supplier at any tier, the Contractor shall not be liable for the repair of any defects of material or design

-8-furnished by the Government nor for the repair of any damage that results from any defect in Government-furnished material or design.

(j) This warranty shall not limit the Government’s rights under the Inspection and Acceptance clause of this contract with respect to latent defects, gross mistakes, or fraud.

UAI 5152.236-9011 DESIGN-BUILD CONSTRUCTION CONTRACTS (MAR 2019)

(a) Design-Build Contract Order of Precedence. The contract includes the standard contract clauses and schedules current at the time of contract award. It entails (1) the Solicitation in its entirety, including all drawings, cuts, and illustrations, and any amendments, and (2) the successful offeror’s accepted proposal. The contract constitutes and defines the entire agreement between the Contractor and the Government. No documentation shall be omitted which in any way bears upon the terms of that agreement.

(1) In the event of conflict or inconsistency between any portion of this contract, precedence shall be given in the following order:

i.Betterments: Any portions of the accepted proposal which both conform to and exceed the requirements of the Solicitation.

ii.The requirements of the Solicitation. (See also FAR 52.236-21, Specifications and Drawings for Construction) iii.All other elements of the accepted proposal.

iv.Any design products including, but not limited to, plans, specifications, engineering studies and analyses, shop drawings, equipment installation drawings, etc. These are "deliverables" under the contract and are not part of the contract itself. Design products must conform to all provisions of the contract, in the order of precedence herein.

(b) Personnel, subcontractors, and outside associates or consultants. In connection with this contract, any in-house personnel, subcontractors, and outside associates or consultants will be limited to individuals or firms that were specifically identified in the Contractor's accepted proposal. The Contractor shall obtain the Contracting Officer's written consent before making any substitution for these designated in-house personnel, subcontractors, associates, or consultants. If the Contractor proposes a substitution, it shall submit the same type of information that was submitted in the accepted proposal to the Contracting Officer for evaluation and approval. The level of qualifications and experience submitted in the accepted proposal or that required by the Solicitation, whichever is greater, is the minimum standard for any substitution.

(c) Responsibility of the Contractor for Design. The Contractor shall be responsible for

-9-the professional quality, technical accuracy, and the coordination of all designs, drawings, specifications, and other non-construction services furnished by the Contractor under this contract. The Contractor shall, without additional compensation, correct or revise any errors or deficiency in its designs, drawings, specifications, and other non-construction services and perform any necessary rework or modifications, including any damage to real or personal property, resulting from the design error or omission.

(1) The standard of care for all design services performed under this agreement shall be the care and skill ordinarily used by members of the architectural or engineering professions practicing under similar conditions at the same time and locality. Notwithstanding the above, in the event that the contract specifies that portions of the Work be performed in accordance with a performance standard, the design services shall be performed so as to achieve such standards.

(2) Neither the Government's review, approval or acceptance of, nor payment for, the services required under this contract, shall be construed to operate as a waiver of any rights under this contract or of any cause of action arising out of the performance of this contract. The Contractor shall be and remain liable to the Government in accordance with applicable law for all damages to the Government caused by the Contractor's negligent performance of any of these services furnished under this contract.

(3) The rights and remedies of the Government provided for under this contract are in addition to any other rights and remedies provided by law.

(4) If the Contractor is comprised of more than one legal entity, each entity shall be jointly and severally liable hereunder.

(d) Contractor's Role during the Design Process. The Contractor's construction management key personnel shall be actively involved during the design process to effectively integrate the design and construction requirements of this contract. In addition to the typical required construction activities, the Contractor's involvement includes, but is not limited to actions such as: integrating the design schedule into the Master Schedule to maximize the effectiveness of fast-tracking design and construction (within the limits allowed in the contract), ensuring constructability and economy of the design, integrating the shop drawing and installation drawing process into the design, executing the material and equipment acquisition programs to meet critical schedules, effectively interfacing the design and construction quality control (QC) management programs with the design QC program, and maintaining and providing the design team with accurate, up-to-date redline and as-built documentation for eventual submission as Record Drawings.. The Contractor shall require and manage the active involvement of key trade subcontractors in the above activities.

(e) Deviating from the Accepted Design. The Contractor must obtain the approval of the Designer of Record and the Government's concurrence, in the form of supplemental agreement to the contract, for any Contractor-proposed revision to the professionally stamped-and-sealed and Government-reviewed final design that has been released for Construction

-10-before proceeding with the revision. The Government reserves the right to disapprove such a revision.

(1) The Government reserves the right to non-concur with any revision to the final design that has been released for construction, including those which may impact furniture, furnishings, equipment selections or operations decisions that were made, based on the reviewed design.

(2) Any Contractor-proposed revision to the design which deviates from the contract requirements (i.e., the Request for Proposal (RFP) and the accepted proposal), will require a bilateral modification (e.g. supplemental agreement) to the contract before any work commences.

(3) Unless the Government initiates a change to the contract requirements, or the Government determines that the Government furnished design criteria are incorrect and must be revised, any Contractor initiated proposed change to the contract requirements, which results in additional cost, shall strictly be at the Contractor's expense.

(4) The Contractor shall track all approved revisions to the reviewed and accepted design and shall incorporate them into the as-built design documentation, in accordance with agreed procedures. The Designer of Record shall document its professional concurrence on the as-builts for any revisions in the stamped and sealed drawings and specifications.

(f) Value Engineering after Award. In reference to Federal Acquisition Regulation (FAR) 52.248-3, Value Engineering - Construction, the Government may refuse to entertain a "Value Engineering Change Proposal" (VECP) for those "performance oriented" aspects of the Solicitation documents which were addressed in the Contractor's accepted contract proposal and which were evaluated in competition with other offerors for award of this contract.

(1) The Government may consider a VECP for those "prescriptive" aspects of the Solicitation documents, not addressed in the Contractor's accepted contract proposal or addressed but evaluated only for minimum conformance with the Solicitation requirements.

(2) For purposes of this clause, the term "performance oriented" refers to those aspects of the design criteria or other contract requirements, which allow the offeror or Contractor certain latitude, choice of and flexibility to propose in its accepted proposal a choice of design, technical approach, design solution, construction approach or other approach to fulfill the contract requirements. Such requirements generally tend to be expressed in terms of functions to be performed, performance required or essential physical characteristics, without dictating a specific process or specific design solution for achieving the desired result.

(3) In contrast, for purposes of this clause, the term "prescriptive" refers to those aspects of the design criteria or other Solicitation requirements wherein the Government expressed the design solution or other requirements in terms of specific material, approaches, systems, and/or

-11-processes to be used. Prescriptive aspects typically allow the offerors little or no freedom in the choice of design approach, materials, fabrication techniques, methods of installation, or any other approach to fulfill the contract requirements.

(g) Warranty of Design. The Contractor warrants that the design shall be performed in accordance with the contract requirements. Design and design related construction not conforming to the Contract requirements shall be corrected at no additional cost to the Government. The standard of care for design is defined in paragraph c of this clause, Responsibility of the Contractor for Design.

(1) The period of this warranty shall commence upon final completion and the Government's acceptance of the work, or in the case of the Government's beneficial occupancy of all or part of the work for its convenience, prior to final completion and acceptance, at the time of such occupancy.

(2) This design warranty shall be effective from the above event through the Statute of Limitations and Statute of Repose or host nation law, as applicable to the place of construction performance.

(3) The rights and remedies of the Government provided for under this clause are in addition to any other rights and remedies provided in this contract or by law.

(h) Government Re-Use of Design. In conjunction with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.227-7022, Government Rights (Unlimited), the Government will not ask for additional originals or copies of the design works after the Contractor provides all required design documentation and record drawing documentation under the instant contract. Further, if the Government uses the design for other projects without additional compensation to the Contractor for re-use, the Government releases the Contractor from liability in the design on the other projects, due to defects in the design that are not the result of fraud, gross mistake as amounts to fraud, gross negligence or intentional misrepresentation.

(End of clause)

-12-

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015‐4696 Daniel W. Simms Division of | Revision No.: 15 Director Wage Determinations| Date Of Last Revision: 12/23/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kentucky

Area: Kentucky Counties of Casey Green Knox Laurel Marion McCreary Pulaski Taylor Wayne Whitley

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE ‐ TITLE FOOTNOTE RATE

01000 ‐ Administrative Support And Clerical Occupations 01011 ‐ Accounting Clerk I 12.73 01012 ‐ Accounting Clerk II 14.29 01013 ‐ Accounting Clerk III 15.99 01020 ‐ Administrative Assistant 19.25 01035 ‐ Court Reporter 15.15 01041 ‐ Customer Service Representative I 9.98 01042 ‐ Customer Service Representative II 11.22 01043 ‐ Customer Service Representative III 12.25 01051 ‐ Data Entry Operator I 12.93 01052 ‐ Data Entry Operator II 14.11 01060 ‐ Dispatcher Motor Vehicle 15.71 01070 ‐ Document Preparation Clerk 12.06

-13-

01090 ‐ Duplicating Machine Operator 12.06 01111 ‐ General Clerk I 11.54 01112 ‐ General Clerk II 12.59 01113 ‐ General Clerk III 14.14 01120 ‐ Housing Referral Assistant 16.88 01141 ‐ Messenger Courier 12.32 01191 ‐ Order Clerk I 11.88 01192 ‐ Order Clerk II 12.97 01261 ‐ Personnel Assistant (Employment) I 16.17 01262 ‐ Personnel Assistant (Employment) II 18.09 01263 ‐ Personnel Assistant (Employment) III 20.16 01270 ‐ Production Control Clerk 20.23 01290 ‐ Rental Clerk 11.73 01300 ‐ Scheduler Maintenance 13.54 01311 ‐ Secretary I 13.54 01312 ‐ Secretary II 15.15 01313 ‐ Secretary III 16.88 01320 ‐ Service Order Dispatcher 14.11 01410 ‐ Supply Technician 19.25 01420 ‐ Survey Worker 13.72 01460 ‐ Switchboard Operator/Receptionist 11.98 01531 ‐ Travel Clerk I 13.02 01532 ‐ Travel Clerk II 13.67 01533 ‐ Travel Clerk III 14.29 01611 ‐ Word Processor I 12.59 01612 ‐ Word Processor II 14.13 01613 ‐ Word Processor III 15.81 05000 ‐ Automotive Service Occupations 05005 ‐ Automobile Body Repairer Fiberglass 18.86 05010 ‐ Automotive Electrician 17.29 05040 ‐ Automotive Glass Installer 16.40 05070 ‐ Automotive Worker 16.40 05110 ‐ Mobile Equipment Servicer 14.46 05130 ‐ Motor Equipment Metal Mechanic 18.22 05160 ‐ Motor Equipment Metal Worker 16.40 05190 ‐ Motor Vehicle Mechanic 18.22 05220 ‐ Motor Vehicle Mechanic Helper 13.49 05250 ‐ Motor Vehicle Upholstery Worker 15.44 05280 ‐ Motor Vehicle Wrecker 16.40 05310 ‐ Painter Automotive 17.29 05340 ‐ Radiator Repair Specialist 16.40 05370 ‐ Tire Repairer 13.06 05400 ‐ Transmission Repair Specialist 18.22 07000 ‐ Food Preparation And Service Occupations 07010 ‐ Baker 14.10 07041 ‐ Cook I 11.05 07042 ‐ Cook II 12.54 07070 ‐ Dishwasher 9.00 07130 ‐ Food Service Worker 9.98 07210 ‐ Meat Cutter 13.26 07260 ‐ Waiter/Waitress 8.89 09000 ‐ Furniture Maintenance And Repair Occupations

-14-

09010 ‐ Electrostatic Spray Painter 16.79 09040 ‐ Furniture Handler 11.90 09080 ‐ Furniture Refinisher 16.79 09090 ‐ Furniture Refinisher Helper 13.79 09110 ‐ Furniture Repairer Minor 15.38 09130 ‐ Upholsterer 16.79 11000 ‐ General Services And Support Occupations 11030 ‐ Cleaner Vehicles 10.16 11060 ‐ Elevator Operator 10.95 11090 ‐ Gardener 14.47 11122 ‐ Housekeeping Aide 10.95 11150 ‐ Janitor 10.95 11210 ‐ Laborer Grounds Maintenance 11.54 11240 ‐ Maid or Houseman 9.30 11260 ‐ Pruner 10.67 11270 ‐ Tractor Operator 13.51 11330 ‐ Trail Maintenance Worker 11.54 11360 ‐ Window Cleaner 12.01 12000 ‐ Health Occupations 12010 ‐ Ambulance Driver 14.51 12011 ‐ Breath Alcohol Technician 17.72 12012 ‐ Certified Occupational Therapist Assistant 26.79 12015 ‐ Certified Physical Therapist Assistant 25.72 12020 ‐ Dental Assistant 16.12 12025 ‐ Dental Hygienist 29.85 12030 ‐ EKG Technician 25.33 12035 ‐ Electroneurodiagnostic Technologist 25.33 12040 ‐ Emergency Medical Technician 14.51 12071 ‐ Licensed Practical Nurse I 15.84 12072 ‐ Licensed Practical Nurse II 17.72 12073 ‐ Licensed Practical Nurse III 19.76 12100 ‐ Medical Assistant 14.11 12130 ‐ Medical Laboratory Technician 22.03 12160 ‐ Medical Record Clerk 14.74 12190 ‐ Medical Record Technician 16.83 12195 ‐ Medical Transcriptionist 16.78 12210 ‐ Nuclear Medicine Technologist 34.41 12221 ‐ Nursing Assistant I 11.51 12222 ‐ Nursing Assistant II 12.94 12223 ‐ Nursing Assistant III 14.12 12224 ‐ Nursing Assistant IV 15.85 12235 ‐ Optical Dispenser 17.06 12236 ‐ Optical Technician 15.84 12250 ‐ Pharmacy Technician 16.21 12280 ‐ Phlebotomist 13.61 12305 ‐ Radiologic Technologist 24.46 12311 ‐ Registered Nurse I 23.35 12312 ‐ Registered Nurse II 28.56 12313 ‐ Registered Nurse II Specialist 28.56 12314 ‐ Registered Nurse III 34.55 12315 ‐ Registered Nurse III Anesthetist 34.55 12316 ‐ Registered Nurse IV 41.41

-15-

12317 ‐ Scheduler (Drug and Alcohol Testing) 21.95 12320 ‐ Substance Abuse Treatment Counselor 18.30 13000 ‐ Information And Arts Occupations 13011 ‐ Exhibits Specialist I 19.83 13012 ‐ Exhibits Specialist II 24.56 13013 ‐ Exhibits Specialist III 30.05 13041 ‐ Illustrator I 19.83 13042 ‐ Illustrator II 24.56 13043 ‐ Illustrator III 30.05 13047 ‐ Librarian 27.21 13050 ‐ Library Aide/Clerk 11.33 13054 ‐ Library Information Technology Systems 24.56 Administrator 13058 ‐ Library Technician 16.11 13061 ‐ Media Specialist I 17.73 13062 ‐ Media Specialist II 19.83 13063 ‐ Media Specialist III 22.10 13071 ‐ Photographer I 17.73 13072 ‐ Photographer II 19.83 13073 ‐ Photographer III 24.56 13074 ‐ Photographer IV 30.05 13075 ‐ Photographer V 36.35 13090 ‐ Technical Order Library Clerk 14.15 13110 ‐ Video Teleconference Technician 17.99 14000 ‐ Information Technology Occupations 14041 ‐ Computer Operator I 14.72 14042 ‐ Computer Operator II 16.47 14043 ‐ Computer Operator III 18.37 14044 ‐ Computer Operator IV 20.41 14045 ‐ Computer Operator V 22.60 14071 ‐ Computer Programmer I (see 1) 22.36 14072 ‐ Computer Programmer II (see 1) 14073 ‐ Computer Programmer III (see 1) 14074 ‐ Computer Programmer IV (see 1) 14101 ‐ Computer Systems Analyst I (see 1) 14102 ‐ Computer Systems Analyst II (see 1) 14103 ‐ Computer Systems Analyst III (see 1) 14150 ‐ Peripheral Equipment Operator 15.39 14160 ‐ Personal Computer Support Technician 21.42 14170 ‐ System Support Specialist 20.90 15000 ‐ Instructional Occupations 15010 ‐ Aircrew Training Devices Instructor (Non‐Rated) 27.29 15020 ‐ Aircrew Training Devices Instructor (Rated) 33.02 15030 ‐ Air Crew Training Devices Instructor (Pilot) 39.35 15050 ‐ Computer Based Training Specialist / Instructor 27.29 15060 ‐ Educational Technologist 30.19 15070 ‐ Flight Instructor (Pilot) 39.35 15080 ‐ Graphic Artist 22.34 15085 ‐ Maintenance Test Pilot Fixed Jet/Prop 39.58 15086 ‐ Maintenance Test Pilot Rotary Wing 39.58 15088 ‐ Non‐Maintenance Test/Co‐Pilot 39.58 15090 ‐ Technical Instructor 19.54

-16-

15095 ‐ Technical Instructor/Course Developer 23.90 15110 ‐ Test Proctor 15.79 15120 ‐ Tutor 15.79 16000 ‐ Laundry Dry‐Cleaning Pressing And Related Occupations 16010 ‐ Assembler 10.26 16030 ‐ Counter Attendant 10.26 16040 ‐ Dry Cleaner 13.02 16070 ‐ Finisher Flatwork Machine 10.26 16090 ‐ Presser Hand 10.26 16110 ‐ Presser Machine Dry Cleaning 10.26 16130 ‐ Presser Machine Shirts 10.26 16160 ‐ Presser Machine Wearing Apparel Laundry 10.26 16190 ‐ Sewing Machine Operator 13.81 16220 ‐ Tailor 14.56 16250 ‐ Washer Machine 11.22 19000 ‐ Machine Tool Operation And Repair Occupations 19010 ‐ Machine‐Tool Operator (Tool Room) 19.81 19040 ‐ Tool And Die Maker 23.79 21000 ‐ Materials Handling And Packing Occupations 21020 ‐ Forklift Operator 16.07 21030 ‐ Material Coordinator 20.23 21040 ‐ Material Expediter 20.23 21050 ‐ Material Handling Laborer 13.80 21071 ‐ Order Filler 14.18 21080 ‐ Production Line Worker (Food Processing) 16.07 21110 ‐ Shipping Packer 16.13 21130 ‐ Shipping/Receiving Clerk 16.13 21140 ‐ Store Worker I 13.44 21150 ‐ Stock Clerk 17.82 21210 ‐ Tools And Parts Attendant 16.07 21410 ‐ Warehouse Specialist 16.07 23000 ‐ Mechanics And Maintenance And Repair Occupations 23010 ‐ Aerospace Structural Welder 24.71 23019 ‐ Aircraft Logs and Records Technician 20.10 23021 ‐ Aircraft Mechanic I 23.53 23022 ‐ Aircraft Mechanic II 24.71 23023 ‐ Aircraft Mechanic III 25.94 23040 ‐ Aircraft Mechanic Helper 18.37 23050 ‐ Aircraft Painter 21.24 23060 ‐ Aircraft Servicer 20.10 23070 ‐ Aircraft Survival Flight Equipment Technician 21.24 23080 ‐ Aircraft Worker 21.24 23091 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 21.24 I 23092 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 23.53

II

23110 ‐ Appliance Mechanic 19.53 23120 ‐ Bicycle Repairer 16.32 23125 ‐ Cable Splicer 32.27 23130 ‐ Carpenter Maintenance 18.99 23140 ‐ Carpet Layer 18.52 23160 ‐ Electrician Maintenance 21.32

-17-

23181 ‐ Electronics Technician Maintenance I 24.36 23182 ‐ Electronics Technician Maintenance II 25.69 23183 ‐ Electronics Technician Maintenance III 26.91 23260 ‐ Fabric Worker 17.44 23290 ‐ Fire Alarm System Mechanic 20.46 23310 ‐ Fire Extinguisher Repairer 16.32 23311 ‐ Fuel Distribution System Mechanic 22.92 23312 ‐ Fuel Distribution System Operator 18.29 23370 ‐ General Maintenance Worker 17.68 23380 ‐ Ground Support Equipment Mechanic 23.53 23381 ‐ Ground Support Equipment Servicer 20.10 23382 ‐ Ground Support Equipment Worker 21.24 23391 ‐ Gunsmith I 16.32 23392 ‐ Gunsmith II 18.52 23393 ‐ Gunsmith III 20.46 23410 ‐ Heating Ventilation And Air‐Conditioning 19.91 Mechanic 23411 ‐ Heating Ventilation And Air Conditioning 20.78 Mechanic (Research Facility) 23430 ‐ Heavy Equipment Mechanic 20.87 23440 ‐ Heavy Equipment Operator 20.93 23460 ‐ Instrument Mechanic 20.46 23465 ‐ Laboratory/Shelter Mechanic 19.53 23470 ‐ Laborer 12.63 23510 ‐ Locksmith 19.53 23530 ‐ Machinery Maintenance Mechanic 21.77 23550 ‐ Machinist Maintenance 19.91 23580 ‐ Maintenance Trades Helper 14.60 23591 ‐ Metrology Technician I 20.46 23592 ‐ Metrology Technician II 21.41 23593 ‐ Metrology Technician III 22.38 23640 ‐ Millwright 25.30 23710 ‐ Office Appliance Repairer 19.86 23760 ‐ Painter Maintenance 18.99 23790 ‐ Pipefitter Maintenance 21.87 23810 ‐ Plumber Maintenance 20.79 23820 ‐ Pneudraulic Systems Mechanic 20.46 23850 ‐ Rigger 20.46 23870 ‐ Scale Mechanic 18.52 23890 ‐ Sheet‐Metal Worker Maintenance 20.46 23910 ‐ Small Engine Mechanic 18.09 23931 ‐ Telecommunications Mechanic I 26.83 23932 ‐ Telecommunications Mechanic II 27.90 23950 ‐ Telephone Lineman 20.98 23960 ‐ Welder Combination Maintenance 19.91 23965 ‐ Well Driller 20.46 23970 ‐ Woodcraft Worker 20.46 23980 ‐ Woodworker 16.32 24000 ‐ Personal Needs Occupations 24550 ‐ Case Manager 13.53 24570 ‐ Child Care Attendant 12.09 24580 ‐ Child Care Center Clerk 15.29

-18-

24610 ‐ Chore Aide 12.99 24620 ‐ Family Readiness And Support Services 13.53 Coordinator 24630 ‐ Homemaker 18.10 25000 ‐ Plant And System Operations Occupations 25010 ‐ Boiler Tender 22.02 25040 ‐ Sewage Plant Operator 18.07 25070 ‐ Stationary Engineer 22.02 25190 ‐ Ventilation Equipment Tender 15.23 25210 ‐ Water Treatment Plant Operator 18.07 27000 ‐ Protective Service Occupations 27004 ‐ Alarm Monitor 16.41 27007 ‐ Baggage Inspector 10.91 27008 ‐ Corrections Officer 16.58 27010 ‐ Court Security Officer 16.65 27030 ‐ Detection Dog Handler 15.17 27040 ‐ Detention Officer 16.58 27070 ‐ Firefighter 16.64 27101 ‐ Guard I 10.91 27102 ‐ Guard II 15.17 27131 ‐ Police Officer I 18.00 27132 ‐ Police Officer II 20.00 28000 ‐ Recreation Occupations 28041 ‐ Carnival Equipment Operator 11.39 28042 ‐ Carnival Equipment Repairer 12.20 28043 ‐ Carnival Worker 8.89 28210 ‐ Gate Attendant/Gate Tender 13.41 28310 ‐ Lifeguard 11.14 28350 ‐ Park Attendant (Aide) 15.01 28510 ‐ Recreation Aide/Health Facility Attendant 10.95 28515 ‐ Recreation Specialist 18.59 28630 ‐ Sports Official 11.95 28690 ‐ Swimming Pool Operator 16.46 29000 ‐ Stevedoring/Longshoremen Occupational Services 29010 ‐ Blocker And Bracer 23.68 29020 ‐ Hatch Tender 23.68 29030 ‐ Line Handler 23.68 29041 ‐ Stevedore I 20.54 29042 ‐ Stevedore II 24.83 30000 ‐ Technical Occupations 30010 ‐ Air Traffic Control Specialist Center (HFO) (see 2) 38.78 30011 ‐ Air Traffic Control Specialist Station (HFO) (see 2) 26.74 30012 ‐ Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45 30021 ‐ Archeological Technician I 17.49 30022 ‐ Archeological Technician II 19.80 30023 ‐ Archeological Technician III 24.23 30030 ‐ Cartographic Technician 24.23 30040 ‐ Civil Engineering Technician 22.31 30051 ‐ Cryogenic Technician I 24.19 30052 ‐ Cryogenic Technician II 26.71 30061 ‐ Drafter/CAD Operator I 17.49 30062 ‐ Drafter/CAD Operator II 19.80

-19-

30063 ‐ Drafter/CAD Operator III 20.60 30064 ‐ Drafter/CAD Operator IV 25.36 30081 ‐ Engineering Technician I 15.91 30082 ‐ Engineering Technician II 17.49 30083 ‐ Engineering Technician III 20.67 30084 ‐ Engineering Technician IV 24.23 30085 ‐ Engineering Technician V 31.34 30086 ‐ Engineering Technician VI 35.87 30090 ‐ Environmental Technician 22.89 30095 ‐ Evidence Control Specialist 24.23 30210 ‐ Laboratory Technician 19.65 30221 ‐ Latent Fingerprint Technician I 24.19 30222 ‐ Latent Fingerprint Technician II 26.71 30240 ‐ Mathematical Technician 24.23 30361 ‐ Paralegal/Legal Assistant I 19.13 30362 ‐ Paralegal/Legal Assistant II 26.11 30363 ‐ Paralegal/Legal Assistant III 31.92 30364 ‐ Paralegal/Legal Assistant IV 38.63 30375 ‐ Petroleum Supply Specialist 26.71 30390 ‐ Photo‐Optics Technician 24.23 30395 ‐ Radiation Control Technician 26.71 30461 ‐ Technical Writer I 24.23 30462 ‐ Technical Writer II 29.82 30463 ‐ Technical Writer III 35.87 30491 ‐ Unexploded Ordnance (UXO) Technician I 24.65 30492 ‐ Unexploded Ordnance (UXO) Technician II 29.82 30493 ‐ Unexploded Ordnance (UXO) Technician III 35.74 30494 ‐ Unexploded (UXO) Safety Escort 24.65 30495 ‐ Unexploded (UXO) Sweep Personnel 24.65 30501 ‐ Weather Forecaster I 26.10 30502 ‐ Weather Forecaster II 30.84 30620 ‐ Weather Observer Combined Upper Air Or (see 2) 20.60 Surface Programs 30621 ‐ Weather Observer Senior (see 2) 24.23 31000 ‐ Transportation/Mobile Equipment Operation Occupations 31010 ‐ Airplane Pilot 29.82 31020 ‐ Bus Aide 12.84 31030 ‐ Bus Driver 17.47 31043 ‐ Driver Courier 13.71 31260 ‐ Parking and Lot Attendant 11.96 31290 ‐ Shuttle Bus Driver 14.76 31310 ‐ Taxi Driver 10.12 31361 ‐ Truckdriver Light 14.76 31362 ‐ Truckdriver Medium 18.91 31363 ‐ Truckdriver Heavy 19.75 31364 ‐ Truckdriver Tractor‐Trailer 19.75 99000 ‐ Miscellaneous Occupations 99020 ‐ Cabin Safety Specialist 14.54 99030 ‐ Cashier 8.96 99050 ‐ Desk Clerk 9.96 99095 ‐ Embalmer 23.25 99130 ‐ Flight Follower 24.65

-20-

99251 ‐ Laboratory Animal Caretaker I 13.20 99252 ‐ Laboratory Animal Caretaker II 14.14 99260 ‐ Marketing Analyst 20.96 99310 ‐ Mortician 23.25 99410 ‐ Pest Controller 14.43 99510 ‐ Photofinishing Worker 12.95 99710 ‐ Recycling Laborer 14.40 99711 ‐ Recycling Specialist 16.84 99730 ‐ Refuse Collector 13.15 99810 ‐ Sales Clerk 11.59 99820 ‐ School Crossing Guard 14.91 99830 ‐ Survey Party Chief 21.90 99831 ‐ Surveying Aide 12.91 99832 ‐ Surveying Technician 19.45 99840 ‐ Vending Machine Attendant 16.86 99841 ‐ Vending Machine Repairer 19.59 99842 ‐ Vending Machine Repairer Helper 16.86

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health‐related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health‐related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

-21-

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *

*This rate is to be used only when compensating employees for performance on an SCA‐ covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties

-22-within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS ‐ NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full‐time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry‐house activities involving propellants or explosives. Demilitarization

-23-modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re‐grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

-24-

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF‐1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF‐1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized

-25-representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of…