W912P520Q0055 0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

1. Extend the delivery date from 45 days ADC to 18 w eeks ADC in CLINS 0001, 0002, & 0003;

2. Correct the Statement of Work delivery date from 45 days ADC to 18 w eeks ADC;

3. Update FAR 52.252-3

1. CONTRACT ID CODE PAGE OF PAGES

J 1 7

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 23-Sep-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P520Q0055

X 9B. DATED (SEE ITEM 11)

09-Sep-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

23-Sep-2020

CODE

US ARMY CORPS OF ENGINEERS-CELRN-RC-N

DIRECTORATE OF CONTRACTING

110 9TH AVENUE SOUTH, RM A405

NASHVILLE TN 37203

W912P5 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912P520Q0055

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

STATEMENT OF WORK

Wolf Creek Power Plant

Replace 6 Penstock Drain Valves with Electric Valve Actuators

The Contractor shall supply six (6) 18” Gate Valves, Class 150, FLG, A216 WCB with six (6) MZa-20/V1 Actuators or equivalent, with hardware.

SUPPLY

6 - 18” Gate Valves

6 – Electric Valve Actuators

6 – Full Face bolt pack and gaskets

SPECIFICATIONS, 18” Gate Valve (Six total)

Valves supplies shall meet at minimum the Characteristics below.

The body of the valves shall be A216 Gr. WCB (STANDARD).

Gland Flange shall be made of Carbon Steel.

Flexible Wedge for improved seating and ease of operation.

Standard trim shall be API trim 8.

Seat faces lapped for smooth finish and superior sealing

Stem shall be non-rotating with surface finish to maximize packing seal for low fugitive emissions

Bonnet and Yoke arms shall be designed for ease of gear, motor, or cylinder actuator adaption

The valve shall be shell, seat and backseat pressure tested per industry standard API 598

The Gland shall be two piece/gland flange design for optimal alignment and uniform packing compression

End Flanges shall have the following raised faces per ASME B16.5: Classes 150-300: 1/16”

Each valve shall have a unique certification number that is traceable to the valve certification number that is traceable to the valve certification sheet which includes MTR data, pressure test report, inspection report and certification of conformance.

Valve Type Gate

Nominal Size (In.) 18

Travel (In.) 18.000

Stem Diameter (In.) 1.875

Threads Per Inch (TPI) 4.0

Number of Starts 2

Stem Pitch 0.250

Stem Lead 0.500

Thrust (Lbs.) 23,270

Valve Start Torque (Ft-Lbs.) 514

Stem Speed (In/Min) 12

Stem Nut Turns 36.00

Required RPM 24

% Reduced Voltage -10%

Safety Margin (1.XX) 1.10

Made in the USA

SPECIFICATIONS, Electrically Operated Valve Actuators (Six Total)

Motor Power Supply 3/60/460

FLA (Full Load Amps) 3.90

LRA (Locked Rotor Amps) 17.10

HP (Horsepower) 1.00

Motor Insulation Class F

Motor Duty 15 Min.

Motor Thermal Contacts 2

Motor Starting Type Direct

Space Heater N/A

Torque Switch Yes

Limit Switch / Customer Contacts OA 4 Configurable Contacts R1-R4 & SM Monitor Relay

Reversing Starter Integral

Control Type Accutronix

Local Control Station Yes-Local

Control Station Lights Normal

Electric Model MX-20

Electric Gearing Non-Locking

Gearbox Model V1

Gearbox Ratio 3.5

A1/D2 Max Stem (In.) 2.170

Max Thrust (Lbs) 31,698

Electric Actuator RPM 77.0

Output RPM 22.0

Rated On-Off Start Torque (Ft-Lbs) 585

Max Available Start Torque (Ft-Lbs) 585

Reduced Voltage Start Torque (Ft-Lbs) 585

Stall Torque (Ft-Lbs) 878

Handwheel Size (In.) 24" TM

Rimpull (Lbs) 156

MSS Base FA14

ISO Base F14

Gearbox standard assembly pos N/A

Operating Time (Sec.) 99

Stem Speed (In/Min) 11.00

Service Open-Close

Made in the USA

WARRANTY

All products are warranted to be free from defects in material and workmanship per the manufacturer’s standard warranty for a period of not less than 1 years from date of manufacture. During the term of the warranty period, parts, assemblies, or components deemed to be defective will be repaired or replaced at our option, free of charge.

DELIVERY & INVOICE

Upon award of the contract, the contractor is required to supply the materials and perform the work necessary to install the above listed items and remove the existing system within an 18 week period.

Contractor shall contact Anthony Watters, Wolf Creek Superintendent, prior to delivery or arrival of the fencing and associated materials.

Wolf Creek Power Plant

Attn: Anthony Watters

980 Power Plant Road

Jamestown KY 42629

270-343-0123

Anthony.M.Watters@usace.army.mil

Invoice for completed work shall be sent to:

Eastern Kentucky Area Office

Attn: Charity Massengale

855 Boat Dock Road

Somerset, Kentucky 42501-6016

606-451-9520 charity.b.massengale@usace.army.mil

SECURITY

All contractor and associated sub-contractor employees shall comply with all applicable project and local security policies and procedures (provided by the district representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by the District

Security Management Office. Contractor workforce must comply with all personal identity verification requirements

(FAR Clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force

Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

Background Investigation Requirements: Since the scope of the contract is for equipment delivery only, there are no security clearance requirements. Under this condition all delivery, supplier, contract, and/or subcontract employees will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. Contact the USACE point of contact for determination of the areas that are considered to be restricted.

SECTION SF 1449 - CONTINUATION SHEET

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

mailto:Anthony.M.Watters@usace.army.mil mailto:charity.b.massengale@usace.army.mil

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

45 dys. ADC 6 EAST KY AREA OFC, WOLF CREEK

ANTHONY WATTERS

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

FOB: Destination

W912P5

To:

18 wks. ADC 6 EAST KY AREA OFC, WOLF CREEK

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

The following Delivery Schedule item for CLIN 0002 has been changed from:

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

The following Delivery Schedule item for CLIN 0003 has been changed from:

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

U S ARMY CORPS OF ENGRS 980 POWER

PLANT ROAD

JAMESTOWN KY 42629

270-343-0123

The following have been modified:

52.252-3 ALTERATIONS IN SOLICITATION (APR 1984)

Portions of this solicitation are altered as follows:

Amendment 0001

The purpose of this amendment is to:

1. Answer questions received from potential vendors;

2. Update FAR clause 52.252-3

Amendment 0002

1. Extend the quote submission deadline from 23 Sep 2020 to 25 Sep 2020 at 11:00 am CST.

2. Answer question received.

3. Update FAR 52.252-3.

Amendment 0003

1. Extend the delivery date from 45 days ADC to 18 weeks ADC in CLINS 0001, 0002, & 0003;

2. Correct the Statement of Work delivery date from 45 days ADC to 18 weeks ADC;

3. Update FAR 52.252-3

(End of Summary of Changes)