OUTBOARD_MOTOR_REPLACEMENT_SOW_REVISED.docx
DOCX document 24 KB Posted
- Solicitation number
- W912P4-16-T-0032
About this file
Statement of Work
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Outboard Motor Replacement Scope of Work USACE Buffalo District 1776 Niagara Street, Buffalo NY 14207
PART 1 – Requirements
1. General Requirements: The work to be performed consists of replacing the outboard motors on the 26’ survey boat MONSON.
2. Detailed Description of Work: The scope of work consists of one base contract, no partial quotes will be accepted.
3. Detailed Requirement: Replace the Twin 225 HP Evinrude E Tec outboard motors with new Twin Honda BF 225 HP outboard motors (one standard and one counter rotating) or approved equal for the 26’ survey boat MONSON. Including, but not limited to: wiring harness, stainless steel propellers, gages, control box and key switch panel.
4. Outboard Motor Requirements:
| SPECIFICATIONS |
| BF225 |
| Type |
| 4-Stroke, SOHC, 60˚ V6, 24 Valve |
| Displacement |
| 3,471 cc (212 cubic inches) |
| Bore & Stroke |
| 89 mm x 93 mm (3.5 x 3.7 inches) |
| Full Throttle RPM Range |
| 5,000-6,000 RPM |
| Rated Power |
| 225 HP @ 5,500 RPM |
| Cooling System |
| Water Cooled |
| Fuel Delivery |
| Programmed Fuel Injection |
| Ignition System |
| MicroComputer Programmed |
| Starting System |
| Electric |
| Exhaust |
| Through Hub |
| Lubrication |
| Wet Sump |
| Trim Range |
| -4° to +16° |
| Tilt Range |
| 72° |
| Gear Ratio |
| 1.86:1 |
| Gear Shift |
| F-N-R |
| Alternator (Electric Start) |
| 90-Amp (1118 watt) |
| Battery Charging Power |
| 60 Amps (756 watts) |
| Propeller |
| Stainless |
| Power Trim & Tilt |
| Standard |
| Oil Pressure Alert |
| Standard |
| Temperature Alert |
| Standard |
| Rev-Limiter |
| Standard |
| Speedometer Pickup |
| Standard |
| Overall Width |
| 625 mm/24.6 inches |
| X Type |
| 635 mm/25 inches |
| X-Type |
| 272 kg/599 lbs. |
5. TRADE IN CREDIT The Twin 225 HP Evinrude E TEC outboard motors will be used for a trade in Credit.
6. LABOR CHARGES: Labor charges for the installation of the outboard motor are to be included in proposal.
7. ADDITIONAL ITEMS: Any additional items required for the installation of the outboard motor are to be included in proposal.
PART 2 – Additional Requirements
1. BASE CONTRACT
a. The scope of work consists of one base contract
b. No partial quotes will be accepted.
2. REPAIR LOCATION
Army Corps of Engineers, Toledo 3906 N Summit St.
Toledo OH 43611
3. DELIVERY REQUIRMENT
Delivery is required within 3 weeks after Award Notice is received.
All items shall be quoted as FOB Delivery.
4. POINT OF CONTACT
Contact Information: POC for this requirement: Roman H. Figler III, PLS Chief, Survey Section, roman.h.figler@usace.army.mil.
Office: 716-879-4429 Fax: 716-879-4356 Cell: 716-239-8851
5. PAYMENT
Payment will be made upon receipt of properly prepared (invoices will have contract number on them) and certified invoice submitted to:
U.S. Army Corps of Engineers, Buffalo District Office Roman H. Figler III, 1776 Niagara Street Buffalo, New York 14207-3199 Phone: 716.879.4429
FAX: 716.879.4356
Invoice can also be emailed to roman.h.figler@usace.army.mil.
6. SUBMITTALS
Requirement submittals shall be submitted to: U.S. Army Corps of Engineers, Buffalo District Office, Gayle Geiger, Purchasing Agent 1776 Niagara Street Buffalo, New York 14207
Phone: 716-879-4122 Fax: 716 879-4353 Email: gayle.geiger@usace.army.mil
File details come from the government source that posted it. Updated .