16-P-XXXX_WIRE_ROPE_FOR_DERRICKBOAT_MCCAULEY_SOW_-_McCauley_Wire_Rope_2015_12_22.doc

SCOPE OF WORK

FOR

WIRE ROPE FOR DERRICKBOAT MCCAULEY

REV. 22 DEC 2015

1. GENERAL SCOPE OF WORK

a. Location of Delivery: The USACE Cleveland Reservation is located at 1035 East 9th Street, Cleveland, OH 44114.

b. Requirements Provide separate prices for each line item, FOB the delivery location. Provide complete product data for each item with the bid, fully documenting and certifying compliance with all of the specifications given below. Required bid items are as follows:

i. Whip Line – Provide one (1) cut length of wire rope, 7/8 inch diameter, 585. ft long, 6 X 25 IWRC RRL EIP bright metal, with a minimum breaking strength of 39.8 tons. The wire rope shall be provided as a single continuous length without splices, on a spool. Cut ends of wire rope shall be properly seized per manufacturer’s recommendations.

ii. Main Line – Provide one (1) cut length of wire rope, 7/8 inch diameter, 635.00 ft long, 6 X 25 IWRC RRL EIP bright metal, with a minimum breaking strength of 39.8 tons. The wire rope shall be provided as a single continuous length without splices, on a spool. Cut ends of wire rope shall be properly seized per manufacturer’s recommendations.

iii. Boom Line – Provide one (1) cut length of wire rope, 7/8 inch diameter, 830.00 ft long, 6 X 25 IWRC RRL EIP bright metal, with a minimum breaking strength of 39.8 tons. The wire rope shall be provided as a single continuous length without splices, on a spool. Cut ends of wire rope shall be properly seized per manufacturer’s recommendations.

iv. Delivery of all items specified above.

c. Supplier’s Qualifications. With the bid, the supplier shall provide the following information regarding the qualifications of the manufacturer and installer:

i. Statement certifying that the supplier has a minimum of 5 years experience in the supply of wire rope.

d. Performance Required. The items will meet or exceed all minimum requirements issued in this contract.

e. Warranties. A single source supplier’s warranty shall be issued by the supplier for all products as follows: 1 year parts and labor.

f. Completion of Work. Completion of work shall include submittal and approval of product data. Acceptance of the equipment and attachments. Delivery of all items shall be made with 28 calendar days of the award of contract.

g. Final Inspection. The products shall be inspected for conformance to the attached specifications. Any damage to the products shall be repaired per the manufacturer’s recommendation or replaced in kind at the discretion of the government; repairs shall be to the satisfaction of the government. Any materials incorporated in the work that was delivered damaged by re-handling, hoisting or otherwise delivery, handling, installation shall be immediately removed from the site and replaced at no additional cost to the government.

2. QUALITY OF MATERIALS

a. All materials, supplies, or articles required for work shall be standard products of reputable manufacturers and entirely suitable for the intended purposes.

b. All materials shall be new and unused and will be subject to the approval of the Contracting Officer.

c. All wire rope shall be domestically manufactured in the United States of America.

3. RISKS AND LIABILITIES

a. The supplier shall assume all risks in connection with performance and delivery of the work and shall be liable for and hold the Government harmless from any and all damages to persons and properties.

4. DELIVERY HOURS

a. Delivery must be made within the hours of 0700 to 1530 on Monday through Friday.

5. BID FORM

Total Bid