B8 PWS Haas Performance Assurance Service AVCRAD.pdf

MISSOURI NAT IONAL GUARD

AVIATION CLASSIFICATION REPAIR ACTIVITY DEPOT

5250 W. DEPOT ROAD

SPRINGFIELD, MISSOURI 65803-9513

PERFORMANCE WORK STATEMENT (PWS) for Haas Performance Assurance Service AVCRAD

W912NS24Q8507

SECTION 1

GENERAL

1.0 General: This is a non-personal service contract to provide Performance Assurance (PA) services for four (4) Haas metalworking machines located in the machine shop at Missouri Aviation Classification Repair Activity Depot (MO AVCRAD), Springfield, MO.

The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform PA services as defined in this PWS. These services shall consist of all major maintenance checks that are recommended by Haas Automation, Inc. All work shall be completed by a Certified Haas Technician to ensure equipment is running at full capacity. Service technicians will be required to report all work that was performed and provide the recommended (if any) reactive services and/or parts necessary to bring the machine(s) to full specifications.

1.2 Background: MO AVCRAD provides field and limited depot aviation aircraft support to a regional 14 state support area. MO AVCRAD maintains a modern, state of the art, limited depot repair facility capable of completing complex repairs on military aircraft.

1.3 Period of Performance (PoP): The Period of Performance shall be one (1) year (12 moths) after date of contract (ADC) with four (4) additional option periods of 12 months each.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services between the hours of 0730-1500 Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at 5250 W Depot Rd, Springfield, MO 65803. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential.

Ver. December 2020

1.4.1.1 Telework: Telework is not allowed under this PWS.

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation, including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Machine Shop Supervisor or the Contracting Officer Representative (COR) NLT 10 days after contract award. After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its

QCP.

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Installation Access and Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 RESERVED

1.4.5.1.1 RESERVED

1.4.5.1.2 RESERVED

1.4.5.1.3 RESERVED

1.4.5.1.4 RESERVED

1.4.5.1.5 RESERVED

1.4.5.1.5.1 RESERVED

1.4.5.1.6 RESERVED

1.4.5.2 For contractors that do not require a Common Access Card (CAC), but require access to a DoD facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.4.5.3 Awareness Training (AT) Level 1: All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level 1 training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable, and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the Machine Shop Supervisor, the COR, or the KO, if a COR is not assigned, within five (5) calendar days after completion of training by each employee or subcontractor personnel. AT Level 1 awareness training is available at the following website: https://jko.jten.mil

1.4.5.4 iWATCH Training: The contractor and all associated subcontractors with an area of performance within an Army-controlled installation, facilities or area shall brief all employees on the local iWATCH Army program (training standards provided by the requiring activity Antiterrorism Officer (ATO)). This locally developed training shall be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the Machine Shop Supervisor, the COR, or the KO if a COR is not assigned. This training shall be completed within seven (7) calendar days of contract award and within seven (7) calendar days of new employees commencing performance. The contractor shall report completion for each contractor employee and subcontractor employee to the Machine Shop Supervisor, the COR, or the KO if a COR is not assigned, within 30 calendar days after contract award.

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 RESERVED

1.4.5.6.1 RESERVED

1.4.5.6.2 RESERVED

https://jko.jten.mil/

1.4.5.6.3 RESERVED

1.4.5.6.4 RESERVED

1.4.5.6.5 RESERVED

1.4.5.7 RESERVED

1.4.5.8 RESERVED

1.4.5.9 RESERVED

1.4.5.10 RESERVED

1.4.5.11 RESERVED

1.4.5.12 RESERVED

1.4.5.13 RESERVED

1.4.5.14 RESERVED

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 RESERVED

1.4.6.1.1 RESERVED.

1.4.6.1.2 RESERVED

1.4.6.1.3 RESERVED

1.4.6.2 RESERVED

1.4.7 Special Qualifications: The contractor shall provide all PA maintenance checks that are recommended by Haas Automation for MO AVCRAD equipment covered by this contract. The PA maintenance inspections will be complete and ensure the machinery has minimal downtime and is maintained in a high state of readiness.

Contractor will demonstrate that the contractor has access to all specialized tooling necessary to complete the performance requirements of this contract. All special tooling and fixtures will be supplied by the contractor at contractor's expense.

The contractor shall ensure all employees possess the required licenses for operating any equipment used in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors. Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified and qualified to provide services.)

The contractor shall be responsible for safeguarding all government information for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured. Contractor will be responsible for security of equipment and material used to complete the PWS.

The government shall neither supervise contractor employees nor control the method by which the contractor performs the required tasks. Under no circumstances shall the government assign tasks to, or prepare work schedules for, individual contractor employees. It shall be the responsibility of the contractor to manage its employees and to guard against any actions that are of the nature of personal services or give the perception of personal services. If the contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the contractor's responsibility to notify the Contracting Officer immediately.

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5.

The KO and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the Machine Shop Supervisor to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed.

1.4.10.1 The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero-tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12 RESERVED

1.4.13 Data Rights: The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 RESERVED

SECTION 2

DEFINITIONS AND ACRONYMS

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 Contracting Officer Representative (COR): An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment will be in writing and will state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications.

This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.5 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

ADC After Date of Contract AEI Army Enterprise Infostructure AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CAC Common Access Card CM Contract Manager CMRA Contractor Manpower Reporting Application COR Contracting Officer Representative DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest PA Performance Assurance

PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SDS Safety Data Sheet SSN Social Security Number TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence

SECTION 3

GOVERNMENT FURNISHED PROPERTY

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: The Government will furnish the necessary workspace for the contractor to perform services outlined in this PWS to include desk space, telephones, computers and other items necessary to maintain an office environment.

3.2 Materials: The Government will furnish coolants, oils, and fluids as needed for PA services.

3.3 Equipment: The Government will furnish a Man Lift for use by contractor personnel in the performance of PA checks and activities as described in this PWS. The Government will also provide waste storage containers as needed.

3.4 Services: Removal and disposal waste, coolant, oils, and any other fluids/solids.

3.5 Documentation: The Government will provide Safety Data Sheets (SDS) upon request.

3.6 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

SECTION 4

CONTRACTOR FURNISHED PROPERTY

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 RESERVED

4.3 RESERVED

SECTION 4

REQUIREMENTS

5.0 Requirements: The contractor shall:

5.1 Within 60 days after receipt of order, perform an initial comprehensive PA inspection of the four (4) Haas machines listed in TECHNICAL EXHIBIT 3.

5.1.1 Provide Machine Shop Supervisor or COR with a report detailing work performed, findings, and condition of each machine as well as any services and/or parts needed to bring the machine(s) up to safety standards or original factory operating specifications.

Report shall be provided within 15 calendar days after service performance completion.

5.1.2 Provide, as required, an estimate of repairs which may be required to bring the machine(s) up to safety standards or original factory operating specifications. Report shall be provided within 30 calendar days after service performance completion.

5.2: RESERVED

5.2.1 RESERVED

5.2.2 RESERVED

6.0 Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars DoDM 1000.13-M-V1

DoD Identif ication (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020) http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-3

Personal Identity Verif ication (PIV) of Federal Employees and Contractors

January

Personal Identity Verification (PIV) of Federal Employees and Contractors (nist.gov)

DoDI 5200.2 DoD Personnel Security Program (PSP)

04/21/2014 (Change 1:

09/09/2014)

DoDI 5200.02, "DoD Personnel Security Program (PSP)," March 21, 2014; Incorporating Change 3 on

September 24, 2020 (whs.mil) Homeland Security Presidential

Directive (HSPD)-12 Policy for a Common Identif ication

Standard for Federal Employees and Contractors

01/27/2022 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and

Civil Liberties Programs

01/29/2019 (Change 1:

12/8/2020) https://www.esd.whs.mil/Directives/issuances/dodi/

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 DoD 5400.11-R, May 14, 2007 (whs.mil)

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015) https://www.esd.whs.mil/Directives/issuances/dodm/

32 Code of Federal Regulation Part 117, National Industrial Security

Program Operating Manual

(NISPOM)

11/30/2021 eCFR :: 32 CFR Part 117 -- National Industrial Security Program Operating Manual (NISPOM)

Army Directive 2014-05 Policy and Implementation

Procedures for Common Access Card Credentialing and Installation Access for Uncleared Contractors

03/07/2014 https://armypubs.army.mil/ProductMaps/PubForm/A rmyDir.aspx

AR 25-2

Army Cybersecurity

04/04/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

AR 530-1

Operations Security

09/26/2014 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

AR 525-13

Antiterrorism

12/03/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR aspx

Executive Order on Combating Race and Sex Stereotyping

09/22/2020 Mandatory Executive Order on Combating Race and Sex Stereotyping – The White House (archives.gov)

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0 499/ https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars http://www.esd.whs.mil/Directives/issuances/dodm https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-3.pdf https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-3.pdf https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/520002p.pdf?ver=2018-05-11-100552-223 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodi/ https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodm/540011r.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.ecfr.gov/current/title-32/subtitle-A/chapter-I/subchapter-D/part-117 https://www.ecfr.gov/current/title-32/subtitle-A/chapter-I/subchapter-D/part-117 https://armypubs.army.mil/ProductMaps/PubForm/ArmyDir.aspx https://armypubs.army.mil/ProductMaps/PubForm/ArmyDir.aspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx http://armypubs.army.mil/ProductMaps/PubForm/ARaspx https://trumpwhitehouse.archives.gov/presidential-actions/executive-order-combating-race-sex-stereotyping/ https://trumpwhitehouse.archives.gov/presidential-actions/executive-order-combating-race-sex-stereotyping/ https://www.esd.whs.mil/Directives/forms/dd0001_0499/ https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective Performance Standard Acceptable Quality

Levels (AQL) Surveillance Method / By

Whom 5.1

Performance Assurance Inspection

Within 60 days af ter receipt of order, perform Performance

Assurance inspection

100% of covered machines been inspected

Inspection / Machine Shop Supervisor or COR

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

1.4.3

QCP

Within 10 days af ter contract award.

1 Electronic Submission

Machine Shop Supervisor or COR

1.4.5.3 AT Level 1

Awareness Training

Certif icates

Provide within 5 calendar days af ter employee completes training.

1 Electronic Submission

Machine Shop Supervisor or COR

1.4.5.4 iWATCH Training Certif icates

Provide within 30 calendar days af ter contract award.

1 Electronic Submission

Machine Shop Supervisor or COR

1.4.10.1 Identif ication Media

Return within 14 days of employee’s departure f rom contract performance.

Original(s) Hard Copy Machine Shop Supervisor or COR

5.1.1 Summary of

completed service

Within 15 calendar days af ter service performance completion

1 Hard Copy and Electronic

Submission

Machine Shop Supervisor or COR

5.1.2 Required estimate of repairs needed

Within 30 calendar days af ter performance completion

1 Hard Copy and Electronic

Submission

Machine Shop Supervisor or COR

TECHNICAL EXHIBIT 3

Listed below are the four (4) Haas metalworking machines for which PA services shall be provided under this PWS.

NOMENCLATURE MODEL SERIAL NUMBER

Vertical Mill VF6SS 1102002

Toolroom Lathe TL-1 3092121

Lathe ST-30Y 3116995

Vertical Mill VF2SSYT 1168414