CLIN_0003_SOW-LUXC182061.pdf

Statement of Work

For

Project No. LUXC182061, Install Exterior Sign at Building 37 (Killey Operations

Center)

South Dakota Air National Guard

November 21, 2018

1. General:

Contractor shall provide all labor, equipment, and material to fabricate and install one

(1) new 11’ by 2’ 9” building signs attached to two 2’6” pylons as per the specifications.

Contractor shall match material, color, and font of existing signs on base. Contractor shall also install 4” pavement around the sign as per the drawings. Contractor shall provide expansion joint around pylons and adjacent to any existing pavement or structures. The Contractor shall install 4” of clean topsoil and seed all areas disturbed by construction.

2. Products:

a. Backer Plate/Background: 0.080” Anodized aluminum plate as a sign backer attached to frame on 2 foot tall sign or as the background on a 1 foot tall sign.

b. Text: White pressure sensitive 3-M Engineer Grade reflective (Part Number 3290).

3. Accessories:

a. Anchors and inserts: Provide nonferrous-metal or hot-dip galvanized anchors and inserts for exterior installations and elsewhere as required for corrosion resistance.

Use toothed steel or lead expansion-bolt devices for drilled-in-place anchors.

4. Finishes, General:

a. Appearance of Finished Work: Variations in appearance of abutting or adjacent pieces are acceptable if they are within one-half of range of approved samples.

Noticeable variations in same piece are not acceptable. Variations in appearance of other components are acceptable if they are within range of approved samples and are assembled or installed to minimize contact.

5. Lettering:

Helvetica, medium, vinyl white to match existing lettering. Lettering is to be computer produced, precision cut, and pre-spaced.