Statement of Work Mezzanine V3.docx

Statement of Work Parts Mezzanine

· Deliver to USPFO Warehouse 15000 highway 115, Camp Ripley, Little Falls, MN, 56345.

· Quantity: 2

· Mezzanines will be used to store parts, bench stock and special tool kits for a military maintenance facility.

· Size of parts mezzanine should be 12’x24’ with 8’ deck clearance.

· Decking should be 3/16” smooth or plate flooring

· Each mezzanine must include one stairway that is internal to the frame.

· Mezzanines must include a kickplate (at least 4”) and a railing.

· Mezzanines must be rated for at least 5,000 lbs.

· Mezzanines must have a removable panel on the end large enough to accommodate a forklift dropping a standard pallet on mezzanine.

· Vendor must submit a drawing along with the solicitation response.

· Mezzanines must be stand alone, self-supporting, Floor anchored.

· All connectors, parts, anchors must be included in the purchase - no welding on site should be required.

Questions answered

· Do you require installation of the mezzanines, or are these only a drop shipment?

No installation is required.

· For the capacity, are you saying you require 5,000 pounds for the entire mezzanine? The are normally rated at a X pounds per square foot.

For a 12X24 mezzanine with an approximate live weight of 10,000Lbs it comes out to 34.7. Typical industrial weight is 125lbs per sq ft. I think that we should go with the 125lsb per sq ft.

· What do you plan to store on the mezzanine? Is it just pallets or will there be cabinets/shelving/etc to store small parts in as well?

There will be storage cabinets with tools and parts. There will be the potential for crates, pallets and tire assemblies.

· What is the maximum load for a pallet being stored on the mezzanine? We need this to determine the point load of a pallet jack on the mezzanine floor.

I would say 1,500 to 2,000lbs for a MAXIMUM load on a pallet.