Attachment 1 SOW-FMS 7 Space Saver High Density Mobile Storage.docx

Space Saver High Density Mobile Storage Solution Colorado army national guard

WATKINS, CO | FISCAL YEAR 24

PURPOSE STATEMENT

Field Maintenance Shop 7 (FMS 7) located at 5049 Front Range Parkway, Watkins, CO 80137 requires storage units that facilitate seamless access, security, filing, and stowage. Areas that necessitate attention for more unified storage of materials include tools, reparable parts, office supplies, and secure filing. The space saver mobile storage compartments need to be installed with minimal interruption to workflow for the maintenance facility. The maintenance facility will be operational during the installation of the storage unit; however, will accommodate the Contractor during the different phases of the installation. A total shutdown of the maintenance shop should be avoided, if possible.

SCOPE OF WORK

The vendor will provide a quote that is developed to the specific requirements and physical characteristics noted below to fit into the available area location at Watkins, CO. Vendor shall build, ship, install all equipment, and cleanup of site after installation is completed. A breakdown of required equipment is listed under the “Performance Objectives” section. The vendor will warranty their work as required under the “Service and Warranty” section.

PLACE OF PERFORMANCE

FMS 7 is located in a secure, fenced-in facility at 5049 Front Range Parkway, Watkins, CO 80137. Site access will be coordinated through a point of contact identified at contract award. A Government representative will be responsible for monitoring installation access and monitoring activities during the course of installation. Facility hours are from 0630 to 1700 Tuesday to Friday.

PERFORMANCE OBJECTIVES

· Functions to be performed:

· Procurement and delivery of all materials required for the completion of this project.

· All labor required for delivery, material offloading, material installation, service work, and warranty work. Labor includes any work required to install storage system.

· All work must be completed within 10 business days or less.

· Complete replacement, with new materials, of all requirements listed below.

· Contractor must cleanup site after installation is completed.

· Requirements and Physical Characteristics:

· Twelve each: 76 ¼” high x 48” long x 30” wide systems with 7 shelves per system and 2 dividers per shelf. Dimensions of shelves: 9 ¾” for top four shelves, 11 ¼” for shelve below top four, and 9 ¾” for bottom two shelves. Four of these storage units need to be lockable. The four that are lockable must have metal rolling security gates (tambour doors/shutter doors) on one side of the storage system to limit access to the system. Each of these storage systems must be movable with rotating spin handles.

· Two each: 76 ¼” high x 48” long x 15” wide with 7 shelves per system and 2 dividers per shelf. Dimensions of shelves: 9 ¾” for top four shelves, 11 ¼” for shelve below top four, and 9 ¾” for bottom two shelves.

· Service and Warranty

· Vendor will warranty work due to improper installation for a minimum of 30 days after installation.

· Additional Information

· None at this time.

ACCEPTANCE

· All purchased equipment is to be shipped by the vendor.

· All equipment will be capable of the full range of manufacturer specified capabilities.

· Equipment will be damage free after installation.

PAYMENT

· Vendor/Contractor must Invoice through Wide Area Workflow (WAWF)

· Vendor must be registered in WAWF in order to submit an invoice

· https://wawf.eb.mil

SITE DIMENSIONS AND IMAGERY

image2.png image3.png image1.png