Fasteners_Specification.pdf
PDF 267 KB Posted
- Attached to
- Repair Wind Damaged Flashing Federal contract opportunity
- Solicitation number
- W912L7-18-B-6002
About this file
Fasteners Specification
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Q&A.pdf | ||
| Bldgs._4425,4455,4513_PDF_Plans.pdf | ||
| Boxbolt_Specification.pdf | ||
| W912L7-18-B-6002,_Repair_Wind_Damaged_Flashing.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Ultimate Shear (lbs) Screw Material
Carbon Stainless 2159 1950
Pull-Out (lbs) Single Sheet
Catalog # Recommended
Grip Range
Steel Thickness
Ultimate Tension Load
(lbs.)
Allowable Tension Load
(lbs.)
EZJ100 .062" & .250"
14 ga. 1100 360 20 ga. 600 200 26 ga. 600 200
EZJ120 .250" through .500"
14 ga. 1000 330 20 ga. 800 260 26 ga. 600 200
EZJ140 .500" & .750"
14 ga. 1100 360 20 ga. 800 260 26 ga. 400 130
Double Sheet
Catalog # Recommended
Grip Range
Steel Thickness
Ultimate Tension Load
(lbs.)
Allowable Tension Load
(lbs.)
EZJ120 .250" 20 ga. 950 300 EZJ140 .500" 20 ga. 920 300
1. Allowable load capacities listed are calculated using and applied safety factor of 3.0.
Fab-Lok® Fasteners To maintain panel integrity in high-stress and high-vibration environments
Vibration, either from inside or outside a building, can make ordinary fasteners loosen and back out. Fab-Lok fasteners combine a slotted aluminum sleeve and fastener to provide high resistance to vibration loosening. Excellent for use with insulated panels.
Specifications
• Drive System: Hex
• Materials: Low carbon steel or 300 series stainless steel screw with aluminum sleeve
• Finish: Zinc
Features & Benefits
• Hex washer head machine screw assembled to a slotted aluminum sleeve and EPDM sealing washer
• After tightening, clamping tines remain in place even if screw is removed
• Greater joint integrity with clamping force
*Fab-Lok fastener is inserted into a 5/16" hole (hole size is not critical) then installed with a power driver equipped with a Fab-Lok holding sleeve, with a socket designed to fit DeWalt® tools DW969K-2, DW968K-2, DW267, DW268 and DW269. Max. 1000 RPM during installation.
before installation after installation can be easily used in blind applications
Catalog No. Description Penetrating Length Grip Range Carton Quantity Carton Weight
Carbon Steel
EZJ100 FAS-10-4 1.373" .062" – .250" 1,000 22
EZJ120 FAS-10-8 1.612" .250" – .500" 1,000 23
EZJ140 FAS-10-12 1.807" .500" – .750" 1,000 27
H3 (300 Series) Stainless Steel
EZJ210 FAC-10-4 1.373" .062" – .250" 1,000 21
EZJ230 FAC-10-8 1.612" .250 "– .500" 1,000 25
EZJ250 FAC-10-12 1.807" .500" – .750" 1,000 27
Fab-Lok Drive Tools*
EZJ900 Holding Sleeve with Socket 1
Identification
Carbon steel screw:
Elco Flag
Stainless steel screw:
”F” above ”2”
For product or ordering information, call 1.800.435.7213 (USA & Canada) 23
EL1022_2016_catalog_10-6-15.indd 23 10/11/16 1:59 PM
File details come from the government source that posted it.