TEC_Furniture_Specification.pdf

February 12, 2016

1 | P a g e

TEC Furniture Package Overview:

The Furniture Contractor shall provide a complete and usable furniture package, including all assembly, setup and installation. The contractor shall include costs for any and all incidental expenses. The principal components shall be as itemized below, EQUAL substitutions may be submitted for approval by the Contracting Officer. The Contractor shall bear the burden of proof and prove to the satisfaction of the Contracting Officer that the proposed substitute is equal to the specified product.

NOTE: Furniture manufacturer is Steelcase unless noted otherwise

ITEM Specification Notes:

SCHEDULE 1: CLASSROOM BUILDING C

A Nesting, 5 Star Swivel Base, Pneumatic Classroom Chair:

Kart Chair by Coalesse

Overall dimensional footprint of the chair must not exceed 24-1/2” to optimize space limitations.

Overall depth shall be at least 22-1/2”D.

Overall standard height range shall be at least 32-1/2”H to 38”H.

SEAT

Seat depth shall be at least 17-3/4”.

Seat width shall be at least 19”W.

The seat of the chair shall be smooth with a waterfall front edge that curves away from the user’s body, allowing ample circulation to lower legs and feet.

Seat shall pivot upward to allow for dense storage. Seat in storage position (vertical) shall not expose mechanism to dust and corrosive elements.

Seat Fabric must be STC Brisa: Black Onyx BR01

BACKREST

Chair must have a lumbar support curve incorporated into the design of the backrest.

Backrest must have flexing mechanism to allow back to tilt up to eight degrees to support a wide range of user body types.

Back Fabric must be –

Manufacturer: Designtex Pattern: Alchemy 3353 Color: Copper 701

Shell must be Black Plastic

MECHANISM FEATURES

Height adjustment shall be achieved with a pneumatic cylinder.

Tilt tension shall be adjustable

240 W. Bessemer St.

Alcoa, Tennessee 37701

2 | P a g e

Chair shall feature a forward back lock.

Seat shall feature a zero front rise.

No tools shall be needed to make user adjustments.

ARM FEATURES

Chair must have cantilevered arms Arms shall be cantilevered to allow for alternative seating positions.

Arms shall be of an appropriate length and width to comfortably support a variety of users.

Width between arms shall be at least 19-1/4”W Arms Must be a Black Gloss Finish

CASTER FEATURES

Casters shall be dual-wheel, swivel type, with durable nylon wheels at least 2” in diameter.

NESTING BASE FEATURES

Chair must be able to nest five chairs in a space of 4’ 6”.

Base must be a Black Gloss Finish

Each additional chair added to the nest must add a maximum of 7” to overall length.

A device to hold up to ten nested chairs together must be available. The device shall store under the seat of a chair.

CONSTRUCTION

Chair frame shall be diecast aluminum for lightweight and durable support.

Upholstered seat models shall feature an additional inner shell molded in polypropylene with 3/4” thick molded urethane foam.

The seat foam must be constructed with a minimum density of 2 pounds per cubic feet.

Upholstered seat must have seamless draw string upholstery construction for vinyl and antibacterial/cleanable surfaces.

Upholstered backrest models shall feature an additional polypropylene inner shell with 3/4” thick molded urethane foam.

The backrest foam must be constructed with a minimum density of 2 pounds per cubic feet.

Arm supports must be die cast aluminum, welded to the aluminum chair frame for durability.

Arm caps shall be molded, self-skinning polyurethane foam for optimal comfort and durability.

Bumpers to protect bases of nested chairs from contacting one another must be molded with black polypropylene Four leg nesting base must be made of die cast aluminum with powder coat finish.

WARRANTY

Must have 10 year warranty that the product shall be free from defects in materials and workmanship Must have 5 year warranty for functional mechanisms such as pneumatics and active adjustments Must have 3 year warranty for high wear parts such as casters, fabric, and other covering materials Product is guaranteed in writing to be available for a minimum of 10 years after first order entry

3 | P a g e

TESTING AND PERFORMANCE

Chair must meet or exceed all ANSI/BIFMA X5.1 American National Standard for Office Furnishings-General Purpose Office Chair Tests Chair must be tested to support 253 lbs.

MATERIALS CHEMISTRY

Painted components must be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

Seat and back shell shall be molded in a plastic which presents no hazards to health, loses little in quality during recycling and is considered an environmentally friendly material.

Seat and back upholstery shall be molded in polyurethane foam which has been produced without CFC. Polyurethane foam is not a health hazard and can be chopped up for re-use as flaked PUR foam.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer must provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

RECYCLED CONTENT AND RECYCLABILITY

Chair must be easily disassembled for recycling purposes using common tools.

Swivel Chairs with Nesting Base (non-upholstered) shall be constructed of up to 35% recycled content Product line must be 100% recyclable.

CERTIFICATIONS

Product shall be at least Level® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

**Photo of product is for representation only and might not reflect actual**

4 | P a g e

B Classroom Folding Table Ballet Table by Coalesse

Product Design Features

TOP

Tops shall be available in the following shapes:

Rectangle with Width of 20”W Rectangle with Length of 60”L Height: 28-1/2”H Must have Folding K Base Must Have Modesty Panel Must have casters Top High Pressure Laminate Finish: Novell Fiber 2859

Edge Finish: Black Ribbed Vinyl Top thickness: 1” nominal on arc, square, rectangular and connecting or 3/4'” on round, teardrop and side tables Edges shall be ribbed vinyl with matching plastic inserts on square or rectangular tops at the corners for a continuous visual effect.

Top core shall be constructed of at least 1” thick, 1-M-3 grade particleboard of at least 45 lb/cu in. density Top surfaces shall be high pressure laminate (HPL).

HPL must be horizontal grade, at least .048” thick with a balancing backer of equal thickness to prevent warp.

BASE

Folding K-base on rectangular models (folded storage width shall be 4” or less) Folding K- bases shall feature a stretcher between the legs for stability and an optional modesty panel with wire management trough Folding K-base shall feature modesty panel with wire management trough Leveler adjustment range is 1/2” for application on uneven floors.

Rectangular models with K-base shall have rear leg casters. Casters shall be 2” diameter, dual-wheel, locking and swiveling type.

Base and Modesty Panel Finish Black Gloss

CONSTRUCTION

Table bases shall be constructed of tight-fitting, custom-designed extrusions and castings, unlike those which are constructed with stock steel tubing, welded joints and capped at the ends with metal or plastic end plugs.

Folding K-base shall feature Aluminum 1” x 3” stretcher with .093” wall thickness which spans between legs for stability.

Edgeband must be applied to the entire perimeter of the worksurface to prevent any outgassing from exposed particle board.

Must have Pivoting diecast aluminum leg with diecast aluminum K-arm

WARRANTY

Must have 10 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective items). Exceptions: 3 year warranty on casters and high wear parts and 5 year warranty on functional mechanisms.

Must have 5 year warranty for functional mechanisms such as pneumatics and active adjustments

5 | P a g e

Must have 3 year warranty for high wear parts such as casters, fabric, and other covering materials Product is guaranteed in writing to be available for a minimum of 10 years after first order entry Product line is warranted for 24/7 application.

TESTING AND PERFORMANCE

Table meets or exceeds all ANSI/BIFMA X5.5-1998 Standard high-pressure laminates meet or exceed NEMA LD3-2005 Worksurfaces shall not sag more than 1/240 of the total worksurface length when subjected to a load of 200 pounds distributed via a rigid 18" x 36" board located flush to the front edge of the worksurface at its apparent weakest point.

Worksurfaces shall sustain no structural damage when subjected to the impact of a 225 pound weight bag, 16" in diameter, dropped from a height of 2" onto the worksurface, with the edge of the weight bag located 1" in from the front edge of the worksurface at its apparent weakest point.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer must provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

RECYCLED CONTENT AND RECYCLABILITY

Powder coat paint overspray used in the finishing process of this product shall be collected by the Manufacturer, reprocessed, and used on interior components.

Shall be constructed of up to 81% recycled content Must be up to 19% recyclable at end of life

CERTIFICATIONS

Furniture is certified to meet the requirements of ANSI/BIFMA X7.1

6 | P a g e

C Folding K Base Table Storage Cart Ballet Table Table Cart by Coalesse

Mobile storage carts shall be available to accommodate up to five folding tables.

Must be 48” Wide Must be 44 ½” in Height Must be 30” in Depth

D Recycling Solution Victor2 Recycling Solution

PRODUCT DESIGN FEATURES

Must be a Mobile Unit

Dimensions shall be 18”D x 36”W x 36”H.

Unit shall accommodate three waste receptacles.

Durable, non-rusting corrugated plastic waste receptacles shall be included.

Waste receptacles shall have a capacity of up to 64 quarts (16 gallons or 60-1/2 liters).

Unit must feature four non-locking casters, two swivel types and two fixed type.

Case shall be fully enclosed with double hinged doors in the back to allow full access to the interior.

Top receptacle inserts with openings shall be included with each waste receptacle.

Interchangeable acrylic inserts, each with a unique opening shape, shall be available in at least eight types (“Plastic”, “Paper”, “Glass”, etc.).

Recycling icons and wording shall be etched into each insert.

Inserts shall be removable without tools.

Soft-touch integral handles shall be featured on both ends of the unit to allow ease of movement.

Top surface shall be flat to allow for food service use or tray storage. Receptacle openings shall be located underneath on a sloped surface, with matching sloped waste receptacles inside.

Top and sides shall be painted steel. Front and back shall be laminated wood.

7 | P a g e

CONSTRUCTION

Frame and case shall be made up of steel parts welded together for strength in the following manner:

Case top and sides shall be one formed sheet steel piece, at least 12 ga. (.108”) thick.

Base shall be at least 16 ga. (.059”) sheet steel with reinforcing and caster-mounting channels underneath.

Angled receptacle top shroud shall be sheet steel, at least 12 ga. (.108”) thick.

Front panel and doors shall be medium density 3/4" thick particle board core (Grade M2 or M3) with high-pressure laminate (HPL) in balanced construction to prevent bowing or warping Edge trim shall be 1mm thick non-PVC plastic Each door shall feature two Euro style adjustable hinges to allow easy access to the interior.

Acrylic inserts shall be 9mm thick, with graphics machined into the back side and then silkscreened.

MATERIALS CHEMISTRY

Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components.

WARRANTY

Manufacturer must offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Laminates and wood veneers shall have a minimum 12 year warranty.

Paint color fastness shall have a minimum 5 year warranty Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture.

RECYCLED CONTENT AND RECYCLABILITY

Mobile units Product shall be constructed of at least 49% recycled content Product shall be at least 70% recyclable.

CERTIFICATIONS

Product shall be at least Level™ 1 Certified with the BIFMA e3-2008 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry Furniture must be certified to meet the emissions requirements of the California DPH Standard Practice for the Testing of Volatile Organic Emissions from Various Sources-2004 (CA Section 01350) and ANSI/BIFMA X7.1

8 | P a g e

E Classroom Wall Mounted Worksurface and Storage with Integrated power

Flex Frame Wall-mounted system

PRODUCT DESIGN FEATURES

Wall mounted Configuration Must have a Depth: 3-1/8”D Wall Mounted Configuration must have a Height of: 4’ Wall Mounted Configuration must have a Width of: 2’-6” Perimeter frame shall include left and right outside vertical frame pieces, top and bottom horizontal frame pieces, corner brackets, spacer brackets, and wall attachment clips.

Frame must mount to most interior flat wall types, including Hollow with wood or metal studs, finished with gypsum board or plaster.

Block or brick Metal Frames must allow for mounting at any height on the wall.

Wall-mounted frame shall accept shelves, bins, drawers and skins individually or stacked in a variety of combinations.

Frame shall be constructed of aluminum with steel supports, resulting in a lightweight, yet durable frame.

Frame must provide an open design to allow the maximum flexibility of cable routing and storage.

Horizontal cable routing must be accommodated through openings in the inner vertical elements.

Wall-mounted frame shall not depend on ceiling or flooring for support.

Wall-mounted frames must meet the following weight capacities when installed per Manufacturer’s building wall requirements to decrease the risk of employee injury.

Must have tested weigh capacity for 450 lbs. per 47-15/16”H section

PANEL SKINS (AKA “TILES”)

Must be removable and can be repositioned in the field (not dedicated to one position).

Must be non-progressive: any skin in the panel configuration can be removed without disrupting any of the others.

9 | P a g e

16-1/2”H skins shall be offered with a power/communication module. The Power shall be plugged with 8’ long cord.

Steel side blades shall ensure that the shape and the integrity of corners stays intact after multiple removals from the frame, especially considering that electricians may need to remove skins to gain access to the interior of the frame.

SHELVES, BINS, AND DRAWERS

Nominal Shelf depth: 12-3/4”D and 19”D, Bin and Drawer depth: 19”D Bin door shall feature a soft close mechanism for quiet operation and to help prevent injury.

Painted metal blades on each side of storage units shall provide a consistent aesthetic.

POWER AND DATA

Power components shall be offered to bring power into the product and distribute it to the user.

Power options must be a plugged option Open frame design shall allow for multiple paths to route power throughout and provide a way to conceal cords behind skins.

Frame verticals shall feature cut outs which allow cables to be routed from one side to the other Power and communication must be field-installed with the ability to add or move power and cable within any frame after installation.

WARRANTY

Manufacturer must offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Laminates and wood veneers shall have a minimum 12 year warranty.

Modular power components shall have a minimum 12 year warranty.

MATERIALS CHEMISTRY

Must have reduced VOC emissions by using water-based adhesives.

Painted components must be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

Must offer PVC-free power components to minimize environmental impact.

Paint colorfastness shall have a minimum 5 year warranty.

PRODUCT MUST MEET OR EXCEED ANSI/BIFMA X5.9 STORAGE UNITS TEST REQUIREMENTS.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Product applied in an Open Plan Typical as defined by BIFMA shall be constructed of up to 59% recycled content:

Components must be up to 54% recyclable at end of life.

CERTIFICATIONS

Product shall be at least Level® 2 Certified with the BIFMA e3 Furniture

10 | P a g e

F Lounge and Break Area Armless Guest Chair

Move 490 Series Armless Guest Chair

PRODUCT DESIGN FEATURES

SEAT

Chair must have cushion seat Seat width must be a minimum of 19”W.

Overall seat depth must not exceed 18-1/2”D.

Seat height from floor must be 18-1/2”H for chairs and 29-1/2”H for stools Seat pan angle shall be at least 5º Seat must be flexible to encourage movement by changing contour to meet the user’s body shape, regardless of posture.

The seat of the chair shall be smooth with a waterfall front edge that curves away from the user’s body, allowing ample circulation to lower legs and feet.

Seat Fabric Must be Manufacturer: Designtex Pattern: Luster 3701 Color: Taupe 103

BACKREST

Chair back must be black polypropylene molded plastic Chair must have a lumbar support curve incorporated into the design of the backrest.

Backrest height from seat must be a minimum of 15-1/4”H Backrest width must be a minimum of 19”W at the narrowest point.

ARMS

Chair must be Armless

LEGS

Product must have a four-legged base for stability.

Chair legs shall be constructed of durable monochromatic steel.

11 | P a g e

Chair must have glides Plastic glides with stainless steel inserts must be available for alternative work applications.

Chair legs must be black powder coated metal

STACKABILITY OF CHAIRS

Chair must be able to stack at least 5 high on the floor for simple storage and maximum flexibility.

No plastic or rubber spacers shall be needed as the construction of the frame allows the chairs to stack without compromising the seats or the frame itself.

CONSTRUCTION

Seat pan - Durable polypropylene upper and lower pans, vibration welded together, with a polyethylene foam block trapped between for added comfort.

Seat cushion- 1” thick, 2 lb/cu ft density molded foam part. Fabric is pulled tightly to the foam with a drawstring and stapled in place.

Frame shall be a welded assembly of steel 7/8” O.D. 13 ga. tubing with steel seat brackets and pins. The seat cushion is fastened to the frame with screws.

Dual wheel casters or nylon glides are inserted into the tubular legs.

Back - A molded polypropylene part which is inserted over the rear leg tube pins and is attached to the seat cushion with screws.

WARRANTY

Manufacturer must offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Glides and casters shall have a minimum 12 year warranty.

Product line must be warranted for users up to 300 lbs.

Product line must be warranted for 24/7 application.

Chair must meet or exceed all ANSI/BIFMA X5.1 American National Standard for Office Furnishings- General Purpose Office Chairs-Tests.

MATERIALS CHEMISTRY

Must be constructed free of environmentally hazardous materials Painted components must be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

LIFE CYCLE ASSESSMENT

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification

RECYCLED CONTENT AND RECYCLABILITY

Chairs shall be constructed of up to 25% recycled content Chairs must be up to 99% recyclable at end of life.

CERTIFICATIONS

Product shall be at least Level® 2 Certified with the BIFMA e3 Furniture

12 | P a g e

G Lounge and Break area Stool Move 490 Series Stool

SEAT

Stool must have polypropylene back Stool must have cushion seat Seat width must be a minimum of 19”W.

Overall seat depth must not exceed 18-1/2”D.

Seat height from floor must be 18-1/2”H for chairs and 29-1/2”H for stools Seat pan angle shall be at least 5º Seat must be flexible to encourage movement by changing contour to meet the user’s body shape, regardless of posture.

The seat of the chair shall be smooth with a waterfall front edge that curves away from the user’s body, allowing ample circulation to lower legs and feet.

Seat Fabric Must be Manufacturer: Designtex Pattern: Luster 3701 Color: Cove 401

BACKREST

Stool back must be black polypropylene molded plastic Stool must have a lumbar support curve incorporated into the design of the backrest.

Backrest height from seat must be a minimum of 15-1/4”H Backrest width must be a minimum of 19”W at the narrowest point.

ARMS

Stool must have cantilever arms Width between the arms of stool must be a minimum of 20-1/2”W.

Arms shall be of a cantilevered design that supports a number of different postures and seated positions including sitting side saddle Arms must not exceed a height of 25-3/4”H to ensure the clearance of most work surfaces and tables.

LEGS

13 | P a g e

Stool must have glides Product must have a four-legged base for stability.

Stool legs shall be constructed of durable monochromatic steel.

Legs must be Black Powder coated Metal Plastic glides with stainless steel inserts must be available for alternative work applications.

CONSTRUCTION

Seat pan - Durable polypropylene upper and lower pans, vibration welded together, with a polyethylene foam block trapped between for added comfort.

Seat cushion- 1” thick, 2 lb/cu ft density molded foam part. Fabric is pulled tightly to the foam with a drawstring and stapled in place.

Frame shall be a welded assembly of steel 7/8” O.D. 13 ga. tubing with steel seat brackets and pins. The seat cushion is fastened to the frame with screws.

Dual wheel casters or nylon glides are inserted into the tubular legs. Stool versions feature a welded steel wire footrest/bookrack Back - A molded polypropylene part which is inserted over the rear leg tube pins and is attached to the seat cushion with screws.

Arms of Move Stool shall be molded polypropylene inserts which become integral to the back.

WARRANTY

Manufacturer must offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Glides and casters shall have a minimum 12 year warranty.

Product line must be warranted for users up to 300 lbs.

Product line must be warranted for 24/7 application.

Stools must meet or exceed all ANSI/BIFMA X5.1 American National Standard for Office Furnishings- General Purpose Office Chairs-Tests.

MATERIALS CHEMISTRY

Must be constructed free of environmentally hazardous materials Painted components must be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

LIFE CYCLE ASSESSMENT

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification

RECYCLED CONTENT AND RECYCLABILITY

Stools shall be constructed of up to 25% recycled content Stools must be up to 99% recyclable at end of life.

CERTIFICATIONS

Product shall be at least Level® 2 Certified with the BIFMA e3 Furniture

14 | P a g e

H Lounge and Break Area standard height table Groupwork HPL 42” Round with 28 dia x 5” dia column base

Surface Shape Shall be Round 48” top Column shall be steel tubing, at least .065” thick, with outside diameters of 5” Top surfaces shall be high-pressure laminate (HPL) Edges shall be 3mm thick flat PVC-free plastic.

Top core shall be constructed of at least 1-1/8” thick, M-3 grade particleboard of at least 45 lb/cu in. density.

Top thickness must be : 1-1/8” nominal (1.140” exact).

Edgeband High Pressure Laminate: 6231 GRAPHITE WALNUT Surface High Pressure Laminate: 2410 GRAPHITE WALNUT Base Finish: 4750 Champagne Metallic Construction Methods, Materials Utilized and Associated Benefits High-pressure laminate (HPL) worksurfaces shall be 1-3/16" nominal finished thickness and must feature balanced construction to prevent bowing or warping, with laminate on the top surface and a 0.030 inch thick backer on the bottom.

The particleboard wood core shall be at least 45 lb/cu in. density. The laminate and backer must be permanently attached and reinforced under pressure to the wood core using water-based polyvinyl acetate (PVA) adhesive.

3mm thick PVC-free plastic edgeband must be applied to the entire perimeter of the worksurface to prevent any outgassing from exposed particle board.

Legs Legs shall feature sturdy welded steel construction for durability.

Levelers shall be steel construction attached to a nylon glide base.

Column shall be steel tubing, at least .065” thick, with outside diameters of 5” Column shall have an internal base mounting bracket with threaded holes welded at the opposite end so the round base plate can be attached to the column weldment with screws on site.

15 | P a g e

Surface Materials Levelers shall be black Shall be field-assembled with common tools Warranty Lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective items). Exceptions: Laminate is warranted for 10 years.

Product line is warranted for 24/7 application.

Multi-use applications will not cause the warranty listed above to be pro-rated.

Worksurfaces shall support the following loads per ANSI/BIFMA X5.5:

Particleboard shall meet requirements as defined by ANSI A208.1 and ASTM D Materials Chemistry Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components PVC-free edgebanding shall be standard on particle board components to avoid potential long-term human and environmental health dangers of PVC and to gain LEED Innovation and Design credit.

Life Cycle Assessment In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer must provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification.

Recycled Content and Recyclability Powder coat paint overspray used in the finishing process of this product shall be collected by the Manufacturer, reprocessed, and used on interior components.

Table bases and legs shall be constructed of up to 34% recycled content.

Table bases and legs shall be up to 99% recyclable at end of life.

Worksurface shall be constructed of up to 83% recycled content.

Certifications Product shall be at least Level™ 1 Certified with the BIFMA e3-2008 Furniture

16 | P a g e

I Lounge Café Height Table Groupwork 30x30 Square Café Height Table

22” Diameter Base

PRODUCT DESIGN FEATURES

Surface Shape Shall be Square 30x30 Base Shall be 22” in Diameter Legs shall feature non-marring plastic levelers or casters. Exception: Flip-top leg only has caster, Top surfaces shall be high-pressure laminate (HPL) Edges shall be 3mm thick flat PVC-free plastic.

Top core shall be constructed of at least 1-1/8” thick, M-3 grade particleboard of at least 45 lb/cu in. density.

Top thickness must be: 1-1/8” nominal (1.140” exact).

Edgeband High Pressure Laminate: 6231 GRAPHITE WALNUT Surface High Pressure Laminate: 2410 GRAPHITE WALNUT Base Finish: 4750 Champagne Metallic Construction Methods, Materials Utilized, and Associated Benefits High-pressure laminate (HPL) worksurfaces shall be 1-3/16" nominal finished thickness and must feature balanced construction to prevent bowing or warping, with laminate on the top surface and a 0.030 inch thick backer on the bottom.

The particleboard wood core shall be at least 45 lb/cu in. density. The laminate and backer must be permanently attached and reinforced under pressure to the wood core using water-based polyvinyl acetate (PVA) adhesive.

3mm thick PVC-free plastic edgeband must be applied to the entire perimeter of the worksurface to prevent any outgassing from exposed particle board.

Legs Legs shall feature sturdy welded steel construction for durability.

Levelers shall be steel construction attached to a nylon glide base.

Column shall be steel tubing, at least .065” thick, with outside diameters of 5” Column shall have an internal base mounting bracket with threaded holes welded at the opposite end so the round base plate can be attached to the column weldment with screws on site.

Surface Materials Levelers shall be black Shall be field-assembled with common tools Warranty Lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective items). Exceptions: Laminate is warranted for 10 years.

Product line is warranted for 24/7 application.

Multi-use applications will not cause the warranty listed above to be pro-rated.

Worksurfaces shall support the following loads per ANSI/BIFMA X5.5:

Particleboard shall meet requirements as defined by ANSI A208.1 and ASTM D Materials Chemistry Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components

17 | P a g e

PVC-free edgebanding shall be standard on particle board components to avoid potential long-term human and environmental health dangers of PVC and to gain LEED Innovation and Design credit.

Life Cycle Assessment In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer must provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification.

Recycled Content and Recyclability Powder coat paint overspray used in the finishing process of this product shall be collected by the Manufacturer, reprocessed, and used on interior components.

Table bases and legs shall be constructed of up to 34% recycled content.

Table bases and legs shall be up to 99% recyclable at end of life.

Worksurface shall be constructed of up to 83% recycled content.

Certifications Product shall be at least Level™ 1 Certified with the BIFMA e3-2008 Furniture

J 48”W 36”D 26”H Worksurface Knife Edge Lagunitas Work Table by Coalesse

PRODUCT DESIGN FEATURES

Laminate Finish: Graphite Walnut Base Finish: Champagne Gloss

TOP:

Worksurfaces shall be 1-1/8” thick and shall feature knife edge profile and rounded corners.

High pressure laminate with 3mm thick matching edge band

BASE:

Work Table base shall be 21”D x 28.5”W Steel Plate at least 3/8” thick and column shall be welded 11 ga. Steel , 3” Dia.

18 | P a g e

WARRANTY

Must have 10 year warranty that product shall be free from defects in materials and workmanship 5 year warranty for articulating back mechanism.

Exception: 1 year warranty for all electrical components.

Product line must be warranted for users up to 300 lbs.

Seating must meet or exceed ANSI/BIFMA X5.4 Lounge Seating Test requirements.

MATERIALS CHEMISTRY

TABLES

Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components.

Top surface shall be finished with high pressure laminate or wood veneer. Flat edgeband shall be 3mm thick, matching of the laminate tops Personal table worksurface shall be finished with high pressure laminate and a pneumatic cylinder

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Must be made up at least 33% recyclable content

CERTIFICATIONS

Testing must be conducted in accordance with ANSI/BIFMA M7.1. Certification must be provided by an organization independent of the manufacturer as well as from the testing laboratory

K Lounge and Break area Lounge Seating Lagunitas Seating by Coalesse

FORMATION: L Shape Lounge with (4) Articulating Backs Including (4) Power Units

PRODUCT DESIGN FEATURES

Product shall feature clean, architectural lines blended with precision stitching details to create a bold, modern aesthetic

19 | P a g e

Product shall feature wide, flat planes on seats, backs and screens, requiring the highest level of upholstery expertise with patterns perfectly aligned at seams.

Ganging package shall include brackets to permanently join units in L- and U-configurations.

Power shall be integrated into the seating Lounges and chaises shall have a seat depth of 21-7/8" with back cushion in the vertical (lounge) orientation and 16-3/4” with back cushion in the horizontal (task) orientation.

Seating to be fully assembled in the factory Power can be hand installed by the customer without a need for tools or an electrician.

Fabric: Steelcase Brisa Color: Ash BR06 Patterned Mesh: Coalesse 5K52 Cement

SEAT

Seat height from floor shall be 16" to provide optimal comfort for a wide variety of users and postures.

Seat cushions shall be made of upholstered foam and shall be attached to the unit.

BACKREST

A concealed articulating mechanism shall allow the backrest cushion to be oriented vertically or horizontally (except for in fixed corners).

An integral top and bottom fabric handle shall be provided on articulating backrest cushions as an intuitive aid for the user to recognize the ability to change the orientation.

Back cushion height from seat shall be 14-3/4" in the vertical orientation and 8- 3/4” height in the horizontal orientation.

Backrest cushions shall be made of upholstered foam and shall be attached to the unit.

SCREENS

Screens are elevated off the floor with adjustable glides Low-back screen shall be 26-3/4”H to provide a clean back aesthetic and to allow partial backrest exposure from behind.

Screens shall feature a 1-13/16” wide rounded outer frame with a center infill.

Both outer frame and infill shall be upholstered in fabric or mesh.

BASE FRAME

Base frame (or Seat Deck) shall consist of welded steel tubing and steel bracketry, with a single sheet of 1/2" thick Baltic Birch or CDX plywood.

Area under base frame shall be open for temporary storage of items like purses, bags, laptop or tablet cases, etc.

Shall feature leveling glides that adjust 5/8" for installations on uneven floors.

WARRANTY

Must have 10 year warranty that product shall be free from defects in materials and workmanship 5 year warranty for articulating back mechanism.

Exception: 1 year warranty for all electrical components.

Product line must be warranted for users up to 300 lbs.

Seating must meet or exceed ANSI/BIFMA X5.4 Lounge Seating Test requirements.

MATERIALS CHEMISTRY

20 | P a g e

SEATING

Foam shall be water-blown and completely free of chloro-fluoro carbons (CFC’s) and PBDEs.

POWER

SEATING POWER

A power module consisting of two simplex receptacles shall be offered to provide seated access to power Power module shall be positioned anywhere along the attachment rail underneath the front of the lounge seat. No tools shall be required to install or move the module.

Power cord shall be at least 10’ long and shall feature a grounded three prong plug.

Wire management clips shall be provided with the power module to route the power cord neatly underneath the seat deck.

CONSTRUCTION

Base frame shall be a welded assembly of 1” x 1-1/2” steel tubing, .083” thick and formed steel brackets. Tubular steel base spanners shall be connected to the legs with powdered metal inserts.

Upholstered outer frame shall be made up of a perimeter of extruded polypropylene tubing, connected with molded polypropylene joints. Frame extrusions shall feature grooves for the fabric to be held tautly with a non-woven polyester welt. A PET plastic sheet, 7.5mm thick, shall provide light blocking at the end. Baltic Birch or CDX plywood tack strips shall provide concealed attachment for the fabric.

Glides shall be made up of a steel pin with a pivoting nylon base.

Seat cushions shall be made up of two nested cushions, the inner being 63.5mm (2-1/2”) thick and 1.8 lb/cu ft. and an outer being 114.3mm (4-1/2”) thick and 3.0 lb/cu ft.

Backrest cushions shall be 220.5mm (8-11/16”) thick and 3.0 lb/cu ft. with an 18mm thick plywood back panel for reinforcement.

Articulating backrests shall feature a hinging mechanism made up of steel components and a pneumatic cylinder

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Must be made up at least 33% recyclable content Lounge seating must be 85% recyclable at the end of life

CERTIFICATIONS

Testing must be conducted in accordance with ANSI/BIFMA M7.1. Certification must be provided by an organization independent of the manufacturer as well as

(No picture provided for this item)

21 | P a g e

L Lounge and Break area Lounge Seating

FORMATION: Two Seater Lounge with Both Arms, (2) Articulating Backs and (2) Power Units

PRODUCT DESIGN FEATURES

Product shall feature clean, architectural lines blended with precision stitching details to create a bold, modern aesthetic Product shall feature wide, flat planes on seats, backs and screens, requiring the highest level of upholstery expertise with patterns perfectly aligned at seams.

Ganging package shall include brackets to permanently join units in L- and U-configurations.

Power shall be integrated into the seating Lounges and chaises shall have a seat depth of 21-7/8" with back cushion in the vertical (lounge) orientation and 16-3/4” with back cushion in the horizontal (task) orientation.

Seating to be fully assembled in the factory Power can be hand installed by the customer without a need for tools or an electrician.

Fabric: Steelcase Brisa Color: Ash BR06 Patterned Mesh: Coalesse 5K52 Cement

SEAT

Seat height from floor shall be 16" to provide optimal comfort for a wide variety of users and postures.

Seat cushions shall be made of upholstered foam and shall be attached to the unit.

BACKREST

A concealed articulating mechanism shall allow the backrest cushion to be oriented vertically or horizontally (except for in fixed corners).

An integral top and bottom fabric handle shall be provided on articulating backrest cushions as an intuitive aid for the user to recognize the ability to change the orientation.

Back cushion height from seat shall be 14-3/4" in the vertical orientation and 8- 3/4” height in the horizontal orientation.

Backrest cushions shall be made of upholstered foam and shall be attached to the unit.

SCREENS

Screens are elevated off the floor with adjustable glides Low-back screen shall be 26-3/4”H to provide a clean back aesthetic and to allow partial backrest exposure from behind.

Screens shall feature a 1-13/16” wide rounded outer frame with a center infill.

Both outer frame and infill shall be upholstered in fabric or mesh.

BASE FRAME

Base frame (or Seat Deck) shall consist of welded steel tubing and steel bracketry, with a single sheet of 1/2" thick Baltic Birch or CDX plywood.

Area under base frame shall be open for temporary storage of items like purses, bags, laptop or tablet cases, etc.

Shall feature leveling glides that adjust 5/8" for installations on uneven floors.

22 | P a g e and workmanship 5 year warranty for articulating back mechanism.

Exception: 1 year warranty for all electrical components.

Product line must be warranted for users up to 300 lbs.

Seating must meet or exceed ANSI/BIFMA X5.4 Lounge Seating Test requirements.

MATERIALS CHEMISTRY

SEATING

Foam shall be water-blown and completely free of chloro-fluoro carbons (CFC’s) and PBDEs.

POWER

SEATING POWER

A power module consisting of two simplex receptacles shall be offered to provide seated access to power Power module shall be positioned anywhere along the attachment rail underneath the front of the lounge seat. No tools shall be required to install or move the module.

Power cord shall be at least 10’ long and shall feature a grounded three prong plug.

Wire management clips shall be provided with the power module to route the power cord neatly underneath the seat deck.

CONSTRUCTION

Base frame shall be a welded assembly of 1” x 1-1/2” steel tubing, .083” thick and formed steel brackets. Tubular steel base spanners shall be connected to the legs with powdered metal inserts.

Upholstered outer frame shall be made up of a perimeter of extruded polypropylene tubing, connected with molded polypropylene joints. Frame extrusions shall feature grooves for the fabric to be held tautly with a non-woven polyester welt. A PET plastic sheet, 7.5mm thick, shall provide light blocking at the end. Baltic Birch or CDX plywood tack strips shall provide concealed attachment for the fabric.

Glides shall be made up of a steel pin with a pivoting nylon base.

Seat cushions shall be made up of two nested cushions, the inner being 63.5mm (2-1/2”) thick and 1.8 lb/cu ft. and an outer being 114.3mm (4-1/2”) thick and 3.0 lb/cu ft.

Backrest cushions shall be 220.5mm (8-11/16”) thick and 3.0 lb/cu ft. with an 18mm thick plywood back panel for reinforcement.

Articulating backrests shall feature a hinging mechanism made up of steel components and a pneumatic cylinder

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Must be made up at least 33% recyclable content Lounge seating must be 85% recyclable at the end of life

23 | P a g e

Testing must be conducted in accordance with ANSI/BIFMA M7.1. Certification

M Classroom Collaboration/Meeting Table Campfire Series “BigTable” (By Turnstone)

Freestanding Desk (aka “Big Table”) Heights shall be 40-1/4”H (stool height) Length shall be 96”L Depth shall be 48”D Table shall have Laminate Finish: Virginia Walnut Metal Accents shall be Platinum Metallic Factory-installed steel reinforcement channels shall be included for added strength.

Must feature leveling glides with at least 1/2” adjustment for application on uneven floors.

Must Have factory-installed power and communication receptacles.

Must Have Worksurface, end panels and center panel Core shall be medium density particleboard.

Worksurface and end panels shall be 1-3/8” nominal thickness.

Center panel shall be 1” nominal thickness.

Worksurface shall feature a durable 3mm thick plastic edge band on user edges.

End and center panels shall feature a durable 1mm thick plastic edge band.

Trough Must be the following:

Shall be 6” wide Shall be factory-installed

Shall be offered as an option to allow for cord and cable management as well as provide an area to mount a worktool rail.

A rectangular grommet shall be located at each end as a place to drop cords and cables. Each grommet shall be replaceable with a factory- or field-installed receptacle if desired.

Big Table must have the following Accessories Pop-up Receptacles which should have the following :

Two power outlets Power shall be 15-amp, one circuit Shall include a 10’ long power cord with three prong plug.

Hinged cover shall allow user to choose to conceal receptacle when not in use.

Center Worktool Rail which should have the following:

Length shall be at least 80”

Rail shall accept Details SOTO™ Worktools ((2) task lights and (2) power receptacles)

Vertical Cord Manager

24 | P a g e

Non-PVC plastic cord manager shall be a continuous channel so that cords and cables can be concealed Inside dimensions shall be at least 3/4" x 1-3/4”.

Shall attach with screws to allow easy installation and relocation

CONSTRUCTION

Worksurface and panels shall be laminate-covered, particle board core construction, assembled with concealed camlock fasteners.

Worksurface edgeband must be a minimum of 3mm thick.

Plastic edgeband must be permanently and securely attached to the wood core with hot melt adhesive. Both ends of any T-mold edge must be pinned or otherwise secured to prevent any loosening at the ends.

Trough shall be formed steel channel, attached to the underside of the worksurfaces with screws.

WARRANTY

Manufacturer must offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Product line must be warranted for 24/7 application.

Laminates shall have a minimum 12 year warranty.

Modular power components shall have a minimum 12 year warranty.

Product must meet or exceed ANSI/BIFMA X5.5 Desk/Table Products tests Lighting Shall comply with UL153 Portable Electric Lights.

MATERIALS CHEMISTRY

Painted components must be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Must be easy to disassemble and recycle components.

Minimum end of life recyclable Shall be 17%

CERTIFICATIONS

SCS IndoorAdvantage™ Gold certification for indoor air quality.

Testing must be conducted in accordance with ANSI/BIFMA M7.1

25 | P a g e

N 24”W x 13”D x 26”H Personal Table Lagunitas PersonalTable by Coalesse

PRODUCT DESIGN FEATURES

Laminate Finish: Graphite Walnut Base Finish: Champagne Gloss

TOP:

Worksurfaces shall be 1/2” thick and shall feature rounded corners.

High pressure laminate with 3mm thick matching edge band

BASE:

Personal Table base shall be 10”D x 15-3/4”W

WARRANTY

Must have 10 year warranty that product shall be free from defects in materials and workmanship 5 year warranty for articulating back mechanism.

Exception: 1 year warranty for all electrical components.

Product line must be warranted for users up to 300 lbs.

Seating must meet or exceed ANSI/BIFMA X5.4 Lounge Seating Test requirements.

MATERIALS CHEMISTRY

TABLES

Paint must be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components.

26 | P a g e

Top surface shall be finished with high pressure laminate. Flat edgeband shall be 3mm thick, matching of the laminate tops Personal table worksurface shall be finished with high pressure laminate and a pneumatic cylinder

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the manufacturer must provide opportunities for the customer to recycle resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

Must be made up at least 33% recyclable content

CERTIFICATIONS

Testing must be conducted in accordance with ANSI/BIFMA M7.1. Certification

O Lounge Area Mobile Lounge Fully Upholstered Arm Chair with Tablet Arm Sidewalk Mobile Lounge Chair with Tablet arm and Casters By Coalesse

PRODUCT DESIGN FEATURES

Lowback chair with Tablet must be 27"D Lowback chair with Tablet must be 30-1/2"W Lowback chair with Tablet must be 29"H.

Must have accessible Tablet arm Tablet arm must be maneuverable to allow the user to enter and exit the chair with ease Fully Upoholstered Must Ship Fully Assembled Seat Depth and Width Lowback chair with Tablet Seat must be 19"D x 26"W Seat Height Seat height from floor must be 17-1/2"H Back Height Lowback chairs height from the seat must be 17”H Tablet Arm Must be in Graphite walnut laminate Shall be available in Right hand and Left hand versions Chair Upholstery:

Manufacturer: Designtex Pattern: Horizon 3522 Color: Artic 801 Chair Fabric Application: (Railroaded) Leg Finish

Platinum Gloss

CONSTRUCTION

27 | P a g e

Unibody frame must be constructed of precision machined CNC parts – utilizing hardwood engineered panels.

Must have self-aligning / interlocking panel parts that are assembled with PVA (Poly-Vinyl Acetate) glue and metal fasteners Upholstery must be hand tailored by a skilled upholsterer.

Bottoms of seats must be covered with cambric. Upholstery Upholstery Panels must be single needle stitched together and inspected for quality.

Double needle stitching must be reinforced with nylon material for additional strength at stress points.

Legs, Casters, or Glides Metal legs must be powder-coated to provide a durable yet beautiful finish Legs shall be painted silver Lounge Chair must have Dual wheel swivel casters Seat Elastic sheet webbing must be securely installed to provide maximum comfort, support and durability.

Multiple densities of polyurethane foam and polyester fiber must be custom cut, contoured and glued (environmentally friendly adhesive) to assure a durable and comfortable product.

WARRANTY

Must have 10 year warranty that product shall be free from defects in materials and workmanship Must have 5 year warranty for metal chair frames, and functional mechanisms such as pneumatics and active adjustments Must have 3 year warranty for high wear parts such as casters, fabric, and other covering materials Must meet or exceed ANSI/BIFMA X5.4 American National Standard for Office Furnishings- Lounge Seating

MATERIALS CHEMISTRY

Product must be designed and constructed of materials that do not present a significant environmental and human health risk

LIFE CYCLE ASSESSMENT

In lieu of…