LEC Telephony Services PWS 14 Sep 2021.pdf

Ver. Sep 2021

PERFORMANCE WORK STATEMENT (PWS)

FOR

LEC Telephony Services

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform LEC Telephony Services, as defined in this PWS.

1.2 Background: LEC services shall provide will deliver PSTN with ANI/CLID POTS services listed in Attachment 1 – “Facilities and Requirements table”.

1.3 Period of Performance (PoP): The Period of Performance shall be 1 Base Year of 12 months and 3 12-month option years.

1.4 General Information:

1.4.1 Reserved.

1.4.2 Reserved.

1.4.3 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall perform services on these days:

1.4.3.1 New Year’s Day: January 1st

1.4.3.2 Martin Luther King, Jr.’s Birthday

1.4.3.3 President’s Day

1.4.3.4 Memorial Day

1.4.3.5 Independence Day: July 4th

1.4.3.6 Labor Day

1.4.3.7 Columbus Day

1.4.3.8 Veteran’s Day: November 11th

1.4.3.9 Thanksgiving Day

1.4.3.10 Christmas Day: December 25th

1.4.4 Place and Performance of Services: The contractor shall provide services 24 hours a day, 7 days a week, including recognized US holidays and when the Government facility/installation(s) is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation(s) closings.

Performance shall be at each location in Attachment 1 – “Facilities and Requirements table”. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential. Teleworking is authorized.

1.4.4.1 Reserved.

1.4.4.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation(s) to experience a delay.

This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.4.3 The contractor’s employees shall become familiar with and obey the regulations of the installations; including fire, traffic, safety and security regulations while on the installation(s). Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation(s) which may affect performance. The Government reserves the right to direct the removal of an employee for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.5 Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 Reserved.

1.4.5.2 For contractors that do not require a CAC, but require access to a DoD facility or installation(s): Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), and applicable installation(s), facility and area commander installation(s)/facility access, and local security policies and procedures (provided by a government representative).

1.4.5.3 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.4 Use of Government Information Systems (IS) and access to Government networks is a revocable privilege, not a right. Users are the foundation of the DoD strategy and their actions affect the most vulnerable portion of the Army Enterprise Infostructure (AEI). Contractor employees shall have a favorable background investigation or hold a security clearance and access approvals commensurate with the level of information processed or available on the system. Contractor employees shall:

1.4.5.4.1 Comply with the command's Acceptable Use Policy (AUP) for Government owned IS and sign an AUP prior to or upon account activation.

1.4.5.4.2 Complete initial and/or annual Information Assurance (IA) training as defined in the IA Best Business Practices (BBP) training (https://informationassurance.us.army.mil).

1.4.5.4.3 Mark and safeguard files, output products, and storage media per classification level and disseminate them only to individuals authorized to receive them with a valid need to know.

1.4.5.4.4 Protect IS and IS peripherals located in their respective areas in accordance with physical security and data protection requirements.

1.4.5.4.5 Practice safe network and Internet operating principles and take no actions that threaten the integrity of the system or network.

1.4.5.5 Protection of Personally Identifiable Information (PII). The contractor shall protect all PII encountered in the performance of services in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 224.103 Personally Identifiable Information and Department of Defense Directive (DoDD) 5400.11, Department of Defense Privacy Program, and DoD 5400.11-R. If a PII breach results from the contractor’s violation of the aforementioned policies, the contractor shall bear all notification costs, call-center support costs, and credit monitoring service costs for all individuals whose PII has been compromised.

https://informationassurance.us.army.mil/

1.4.5.6 AT Level 1 Awareness Training (AT): All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete Level 1 AT within 30 calendar days after contract start date and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the COR within 15 calendar days after completion of training. Level 1 AT is available at http://jko.jten.mil/courses/atl1/launch.html .

1.4.5.7 Reserved.

1.4.5.8 Reserved.

1.4.5.9 Reserved.

1.4.5. Reserved.

1.4.5.11 Reserved.

1.4.5.12 Reserved.

1.4.5.13 Reserved.

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. NOTE: All references to keys include key cards. The contractor shall establish and implement methods of ensuring that no keys/key cards issued by the Government are lost or misplaced or are used by unauthorized persons. No keys issued by the Government shall be duplicated. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the

COR.

1.4.6.1.1 In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon direction by the KO, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the Government replaces or re-keys the locks, the Government will deduct the total cost of lock replacement or re-keying from the monthly payment due the contractor. In the event a master key is lost or duplicated, the Government will replace all locks and keys for that system, and will deduct the total cost from the monthly payment due the contractor.

1.4.6.1.2 The contactor shall prohibit the use of the Government issued keys/key cards by any persons other than the contractor’s employees. The contractor shall prohibit the http://jko.jten.mil/courses/atl1/launch.html opening of locked areas by contractor employees to permit entrance of persons other than contactor employees engaged in the performance of services in those areas, or personnel authorized entrance by the KO.

1.4.6.2 Reserved.

1.4.7 Reserved.

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR Subpart 42.5. The KO, COR and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed. The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12 Reserved.

1.4.13 Data Rights: The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Reserved.

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 Contracting Officer Representative (COR): An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment will be in writing and will state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications.

This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.5 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance: The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12 Internet: The global network/system of interconnected computer networks that use the Internet protocol suite (TCP/IP) to link devices worldwide. This refers to the specific network of networks commonly known as the “Internet” (with uppercase i) as opposed to the technologies in use such as IPv4.

2.2 Acronyms:

AEI Army Enterprise Infostructure AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager CMRA Contractor Manpower Reporting Application COR Contracting Officer Representative DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SSN Social Security Number TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence CPE Customer Premises Equipment FXO Foreign Exchange Office SBC Session Border Controller VRF Virtual routing and forwarding QoS Quality of service (networking technology concept) MOS Mean Opinion Score (telephony quality measurement concept) PSTN Public switched telephone network NANP North American Numbering Plan DID Direct Inward Dial GSA General Services Administration EIS Enterprise Infrastructure Solutions LEC Local Exchange Carrier, from 1984 ATT divestiture definitions PSTN Public Switched Telephone Network

POTS Plain Old Telephone Service, standard wireline PSTN service

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: The Government will furnish the necessary workspace for the contractor to perform services outlined in this PWS to include desk space, telephones, computers and other items necessary to maintain an office environment.

3.2 Reserved.

3.3 Equipment: CPE (Routers, FXO receivers, SBCs, Traditional telephone and fax devices)

3.4 Reserved.

3.5 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 Reserved.

5.0 Requirements: The contractor shall:

5.1 Provide LEC services for 85 locations listed on attachment 1. With the option to add up to 10 lines as needed.

5.1.1 LEC services shall provide will deliver PSTN with ANI/CLID POTS services listed in Attachment 1 – “Facilities and Requirements table”.

5.1.2 The provider shall have the long distance provider as Verizon using the federal GSA contract Networx. The provider shall not change the long distance provider, nor shall it permit the long distance provider to be changed unless formally requested by the Government.

5.1.3 As a public safety agency, the government shall be prioritized per industry standard for such organizations for service delivery and repair.

5.1.5 Contractor shall not permit charges for services other than authorized long distance from a GSA Networx provider and standard POTS service.

5.1.6 The contractor shall not permit the addition and billing of any network or related services without the consent of the government using a formal services ordering process. The government shall not be responsible to pay for any service unless the provider can produce documented evidence of acceptance by the government by an authorized government agent.

5.1.7 The government may cancel service(s), or portion of service, at any time without penalty.

5.3 Contractor Manpower Reporting Application (CMRA):

5.3.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Adjutant General’s Department of Kansas via a secure data collection site.

5.3.2 The contractor shall completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2020. Contractors may direct questions to the help desk at http://www.ecmra.mil.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar or http://farsite.hill.af.mil/

Defense Federal Acquisition Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current /index.html or http://farsite.hill.af.mil/

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 http://www.esd.whs.mil/Directives/issuances/dod m/

Federal Information Processing Standards (FIPS) Publication 201-2 Personal Identity Verification (PIV) of Federal Employees and Contractors

(paragraph 9)

August 2013 http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.2 01-2.pdf

DoDM 5200.2 Regulation 5200.02 Procedures for the DoD Personnel

Security Program (PSP)

04/03/2017 http://www.dtic.mil/whs/directives/corres/pub1.htm l

Army Directive 2014-05 Policy and Implementation

Procedures for Common Access Card

03/07/2014 http://www.apd.army.mil/ProductMaps/PubForm/ ArmyDir.aspx http://www.ecmra.mil/ http://www.ecmra.mil/ https://www.acquisition.gov/?q=browsefar http://farsite.hill.af.mil/ http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://farsite.hill.af.mil/ http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.apd.army.mil/ProductMaps/PubForm/ArmyDir.aspx http://www.apd.army.mil/ProductMaps/PubForm/ArmyDir.aspx

Credentialing and Installation Access for Uncleared Contractors

AR 190-13

The Army Physical Security Program

02/25/2011 http://www.apd.army.mil/ProductMaps/PubForm/ AR.aspx

Homeland Security Presidential Directive (HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDD 5400.11 Department of Defense Privacy

Program

10/29/2014 http://www.dtic.mil/whs/directives/corres/dir.html#

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 http://www.dtic.mil/whs/directives/corres/pub1.htm l

DoDD 8140.01 Cyberspace Workforce Management

08/11/2015 OK http://www.dtic.mil/whs/directives/corres/dir.html

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015)

OK http://www.dtic.mil/whs/directives/corres/pub1.htm l

AR 25-2

Information Assurance

10/24/2007 OK http://armypubs.army.mil/ProductMaps/PubForm/ AR.aspx

AR 530-1

Operations Security

09/26/2014 OK http://armypubs.army.mil/ProductMaps/PubForm/ AR.aspx

DoD 5220.22-M National Industrial Security Program

Operating Manual

02/28/2006 (Change 2:

05/18/2016)

OK http://www.dtic.mil/whs/directives/corres/pub1.htm l

AR 381-12

Threat Awareness and Reporting

Program (TARP) (Section II, ¶ 2-4.b)

06/01/2016 OK http://armypubs.army.mil/ProductMaps/PubForm/ AR.aspx

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website

DD 1172-2

Application for Identification

Card/DEERS Enrollment

Mar 2017 http://www.dtic.mil/whs/directives/forms/index.htm

I-9 Employment Eligibility Verification

11/14/16 https://www.uscis.gov/sites/default/files/files/form/i-9.pdf

DD 441

Department of Defense Security

Agreement

Jan 2017 http://www.dtic.mil/whs/directives/forms/dd/ddforms0001- 0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 http://dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://www.apd.army.mil/ProductMaps/PubForm/AR.aspx http://www.apd.army.mil/ProductMaps/PubForm/AR.aspx https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 http://www.dtic.mil/whs/directives/corres/dir.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/dir.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html http://www.dtic.mil/whs/directives/forms/index.htm https://www.uscis.gov/sites/default/files/files/form/i-9.pdf http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective Performance Standard Acceptable Quality

Levels (AQL) Surveillance Method / By

Whom

5.1.

Provide LEC services deliver PSTN with ANI/CLID POTS services

Uptime and service priorities as defined by GSA Networx or GSA

EIS contracts.

Random monitoring / COR

TECHNICAL EXHIBIT 2

Deliverables Schedule

Reserved

TECHNICAL EXHIBIT 3

Estimated Workload Data

This information is provided for historical background only. It is not a guarantee of workload quantities.

ITEM NAME ANNUAL ESTIMATED

QUANTITY

ATTACHMENT 1

Facilities and Requirements table

Unit/Facility City DN Provider Type

North New York Wichita 316-269-1565 ATT FXO

North New York Wichita 316-269-1575 ATT FXO

Armory Newton 316-283-0583 ATT FXO

Armory Newton 316-283-4848 ATT FXO

Wichita South Seneca Armory Wichita 316-524-4279 ATT FXO

Wichita South Seneca Armory Wichita 316-524-7521 ATT FXO

Armory Augusta 316-775-7291 ATT FXO

Armory Dodge City 620-225-4741 ATT FXO

Armory Dodge City 620-225-6363 ATT FXO

Armory Pittsburg 620-235-0049 ATT FXO

Armory Pittsburg 620-235-0561 ATT FXO

Armory Coffeyville 620-251-0424 ATT FXO

Armory Coffeyville 620-251-6641 ATT FXO

Armory Emporia 620-342-0457 ATT FXO

Armory Emporia 620-343-7906 ATT FXO

Armory Iola 620-365-4000 ATT FXO

Armory Iola 620-365-7629 ATT FXO

Armory Liberal 620-624-4071 ATT FXO

Armory Liberal 620-626-6376 ATT FXO

Armory Hutchinson 620-662-9052 ATT FXO

Armory Pratt 620-672-6581 ATT FXO

Armory Hutchinson 620-728-4200 ATT FXO

Armory Great Bend 620-793-7835 ATT FXO

Armory Great Bend 620-793-9366 ATT FXO

Armory Ottawa 785-242-4369 ATT FXO

Armory Ottawa 785-242-4375 ATT FXO

Armory Concordia 785-243-1153 ATT FXO

Armory Concordia 785-243-4190 ATT FXO

Armory Abilene 785-263-1792 ATT FXO

Armory Abilene 785-263-1822 ATT FXO

SDB Topeka 785-266-3854 ATT GAS

SDB Topeka 785-266-3855 ATT GAS

SDB Topeka 785-266-3873 ATT GAS

SDB Topeka 785-266-7365 ATT VG SDB FXO 0/2/0

SDB Topeka 785-266-8558 ATT J2 Fusion Center STE

SDB Topeka 785-266-8726 ATT GAS

SDB Topeka 785-267-0753 ATT VG SDB FXO 0/2/1

SDB Topeka 785-267-3094 ATT VG SDB FXO 0/2/2

SDB Topeka 785-267-5893 ATT VG SDB FXO 0/2/3

SDB Topeka 785-267-7646 ATT J2 Fusion Center STE

Armory Smith

Center

785-282-3971 ATT FXO

Armory Smith

Center

785-282-6544 ATT FXO

AASF #2 Salina 785-309-0376 ATT Fax

GPJTC Nickell Salina 785-452-9117 ATT FXO 1/X/X

Range Salina 785-452-9838 ATT FXO 1/0/0

Armory Colby 785-462-2361 ATT FXO

Armory Manhattan 785-539-1914 ATT FXO

Armory Manhattan 785-539-7382 ATT FXO

Armory Marysville 785-562-2235 ATT FXO

Armory Hays 785-623-6400 ATT FXO

FMS Hays 785-625-2118 ATT Shop Phone

Armory Hays 785-628-9840 ATT FXO

Armory Clay Center 785-632-2866 ATT FXO

Armory Clay Center 785-632-5901 ATT NEED

Salina Eckert MED DET

Fridge

Salina 785-820-8046 ATT Fridge

UTES Salina 785-823-7809 ATT FXO

GPJTC Nickell Salina 785-823-7843 ATT FXO 1/X/X

GPJTC Nickell Salina 785-823-7852 ATT FXO 1/X/X

UTES Salina 785-823-7864 ATT FXO

GPJTC Nickell Salina 785-827-3831 ATT FXO 1/X/X

AASF #2 Salina 785-827-3942 ATT Crash Phone

Armory Lawrence 785-842-5119 ATT FXO

Armory Lawrence 785-842-7133 ATT FXO

AFRC Topeka 785-862-0361 ATT FXO 0/2/0

AFRC Topeka 785-862-0362 ATT FXO 0/2/1

AFRC Topeka 785-862-0363 ATT FXO 0/2/2

AFRC Topeka 785-862-7631 ATT

Armory Norton 785-877-5103 ATT FXO

Armory Paola 913-294-3611 ATT FXO

Armory Fridge Lenexa 913-310-0035 ATT POTS

Armory Kansas City 913-342-3329 ATT FXO

Armory Kansas City 913-342-7485 ATT FXO

Armory Lenexa 913-492-3910 ATT FXO

Armory Lenexa 913-492-3920 ATT FXO

Armory Olathe 913-782-8512 ATT FXO

Armory Olathe 913-782-8524 ATT FXO

Lines Needed 9 Total Augusta 2115 Moyle St, Augusta, KS 67010 1 316-775-7291

Pratt 207 Rochester St, Pratt, KS 67124 1 620-672-6581

Colby 470 S Range Ave, Colby, KS 67701 1 785-462-2361

Marysville 306 Veterans Memorial Dr. Marysville, KS 66508 1 785-562-2235

Clay Center 227 S 12th St, Clay Center, KS 67432 1 785-632-2866

Norton 1200 N State St, Norton, KS 67654 1 785-877-5103

Paola 1010 Hedge Ln Ct, Paola, KS 66071 1 913-294-3611

Museum Topeka 125 SE Airport Dr., Topeka, KS 66619 2