Questions and Answers.pdf
PDF 192 KB Posted
- Attached to
- JIB CRANE SYSTEM
- Solicitation number
- W912JB26QA019
About this file
This is a Contractor Questions and Government Answers document for RFQ W912JB-26-Q-A019 issued by the Department of Defense. The document addresses eight clarifications regarding a JIB crane procurement with the following key specifications: The crane must have a 2-ton lift capacity with a maximum height under boom of 12 feet, despite the crane's 20-foot lift capability. The installation of the crane is required, and the installation location has a cement slab floor that will accommodate a foundation-mounted system as needed for the 2-ton capacity. Contractors may provide matched 2,000-pound components for the crane, electric hoist, and manual trolley system, or alternatively submit 4,000-pound components that are factory derated and permanently labeled for 2,000-pound maximum operation. Power requirements are flexible; 115V single-phase power is not mandatory, and three-phase 240V power is available with 115V single-phase also provided on site.
The RFQ closes on Wednesday, August 12, 2026, at 12:30 p.m. Eastern Standard Time. This document serves as clarification guidance for potential contractors preparing proposals and does not contain pricing information, evaluation criteria, or other procurement terms beyond the technical specifications and installation requirements addressed through the question-and-answer process.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF_30 amendment of RFQ 26QA019.pdf | ||
| Attachment A - Product Description.pdf | ||
| Attachment B - Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Contractor Questions / Government Answers
W912JB-26-Q-A019
Following are questions received on the above mentioned RFQ from contractor(s) and the government’s answers.
Question 1:
The product specifications state that height under boom should be 12 feet, but the lift says 20 feet. Which is correct?
Answer:
The space above the boom will only fit a 12ft crane; the crane should lift 2-ton which the option is only available in a 20ft lift.
Question 2:
Will installation of the crane be required?
Answer:
Yes
Question 3:
Any information on the floor of the place where the crane will be installed? Freestanding JIB crane with a 2-ton capacity would require a foundation-mounted installation with different foundation requirements. Please clarify if a 1-ton foundationless freestanding JIB crane or a 2-ton foundation mounted JIB crane is requested.
Answer:
The floor is a cement slab. The 2-ton capacity will require a foundation. The product specification sheet has been revised.
Question 4:
Must the hoist and trolley have 4,000 lb capacities despite the crane’s 2,000 lb capacity?
Answer:
Yes, 2,000 lb is fine.
Question 5:
Would a matched 2,000-lb crane, electric hoist, and manual trolley system be acceptable?
Answer:
Yes.
Question 6:
If the 4,000-lb components remain required, may they be factory derated and permanently labeled for a 2,000-lb maximum?
ATTACHMENT C
Total Pages: 2
Answer:
Yes.
Question 7:
Is 115V single-phase power mandatory?
Answer:
No
Question 8:
If three-phase power is available, what voltage is provided?
Answer:
3 phase is 240V and also 115V on the single
The RFQ closes on Wednesday, August 12, 2026, at 12:30 p.m. Eastern Standard Time.
File details come from the government source that posted it. Updated .