RFQ_COS_FURNITURE.pdf

RFQ Name: 272 COS BLDG 6922 Furniture

OFFICE FURNITURE RFQ ITEMIZED PARTS LIST/ SALIENT CHARACTERISTICS

Service/Installation Requirements:

- ALL NEW FURNITURE DESCRIBED IN THIS DOCUMENT WILL BE PROFESSIONALLY INSTALLED IAW THE

ATTACHED BUILDING 6922 DRAWINGS

- EXISTING WORKSTATIONS AND FURNITURE LOCATED IN BUILDING 6916 DISASSEMBLED, MOVED, AND

REASSEMBLED IN BUILDING 6922 IAW THE ATTACHED BUILDING 6922 DRAWINGS

QTY Description:

ROOM 103

1 EXECUTIVE CONFERENCE TABLE, 60D X 180W, (3) CUTOUTS FOR ELLORA E2X POWER/DATA UNITS, 1.5"

THICK WORKSURFACE

ROOM 140

1 EXECUTIVE CONFERENCE TABLE, 60D X 144W, (2) CUTOUTS FOR ELLORA E2X POWER/DATA UNITS, 1.5"

THICK WORKSURFACE

ROOM 103/140

5 BYRNE ELLORA/E2X IN-SURFACE POWER/DATA UNIT, 2 POWER, 2 CAT6, 120" POWER CORD - PART #BE02511- E2X-2-2-Z08-120 1 EQUAL TO: CODE CONFERENCE, MESH BACK, UPHOLSTERED SEAT, LOOP ARMS, PART #CD7066

ROOM 125

3 FABRIC-COVERED ACOUSTICAL PANEL, 30W X 48H

1 WORKTOP SUPPORT LEFT

4 WORKSURFACE SUPPORT BRACKET, PAIR

5 WORKTOP SUPPORT SHARED, LEFT HAND

4 WORKTOP SUPPORT SHARED, RIGHT HAND

2 CORNER WORK SURFACE, CURVED FRONT WITH GROMMET 24D X 48W

1 EXTND D-SHAPED WORK SURFACE,LH W/ GMT 24D X 48W X 60L

2 EXTND D-SHAPED WORK SURFACE,RH W/ GMT 24D X 48W X 60L

1 FABRIC-COVERED ACOUSTICAL PANEL, 48W X 48H

5 FLIPPER DOOR STORAGE UNIT, 36W

5 FULL OPEN PANEL, PWR BASE, 36W X 66H

5 FULL OPEN PANEL, PWR BASE, 48W X 48H

5 WORKSURFACE SUPPORTING PEDESTAL, 6"/6"/12"

5 TACKBOARD, 36W X 16H

5 TACKBOARD, 48W X 16H

5 WORKSURFACE, RECTANGULAR W/GROMMET 24D X 36W

1 EXTERIOR RADIUS WORK SURFACE, 50W X 12D, w/ 4" POST LEG

ROOM 126

1 EXECUTIVE HUTCH W/LAMINATE NON-LCK DOORS, NO PAPR MGT, 14D X 72W X 37H

1 EXECUTIVE RECTANGULAR DESK W/ FULL MODESTY & GMT, 30D X 72W

1 EXECUTIVE LAMINATE RECTANGULAR DESK W/ HALF MODESTY & GMT, 24D X 72W

1 LAMINATE COMBINATION LATERAL FILE CENTER

1 LAMINATE MODULAR PEDESTAL, 6/6/12

1 TACKBOARD, 69 5/8 X 17H

1 HEIGHT ADJ TABLE BASE, SQUARE LEG, GUNMETAL FINISH, 30D-36D X 48-72 WIDTH, PROGRAMMABLE

CONTROL PAD

1 EXECUTIVE RECTANGULAR DESK TOP, 29.5D X 58W X 1.5" THICK, FLAT EDGE

1 36" DESK CABLE ORGANIZER TRAY

ROOMS 127-129 - DESK TYPICAL C

1 INT LAMINATE MODULAR PEDESTAL, 6/6/12

1 EXECUTIVE RECTANGULAR DESK W/ FULL MODESTY & GMT, 30D X 72W, 1.5" THICK TOPS

1 HEIGHT ADJ TABLE BASE, SQUARE LEG, GUNMETAL FINISH, 30D-36D X 48-72 WIDTH, PROGRAMMABLE

CONTROL PAD

1 EXECUTIVE RECTANGULAR DESK TOP, 29.5D X 58W X 1.5" THICK, FLAT EDGE

1 36" DESK CABLE ORGANIZER TRAY

ROOMS 126-129

8 GUEST CHAIRS - STACK CHAIR W/ GLIDES AND ARMS

4 EXECUTIVE WARDROBE/STORAGE COMBO UNIT - PER ATTACHED SPEC - 24D X 36W X 66H, WARDROBE

BAR/ADJ SHELVING

ROOM 131

2 WORK SURFACE, EXTENDED CORNER, 24D X 58W X 24D X 72W (1 RIGHT-HANDED, 1 LEFT-HANDED)

1 WORK SURFACE, RECTANGULAR NO GMT 24D X 30W

2 WORKSURFACE SUPPORTING PEDESTAL, 6"/6"/12"

2 HGT ADJ EXT CORNER TABLE BASE, 2 STAGE ADJ, 24D X 48W X 72W

2 36" DESK CABLE ORGANIZER TRAY

ROOM 135 - TEAM BENCHING

9 72"W CONFER DOUBLE SIDED CHANNEL

9 BASE FEED, END MOUNT, 72"L

6 CONFER DBL SIDED END PANEL, 29 1/4"H X 62 1/8"W

6 CONFER DBL SIDED MID SPPT PANEL, 21 1/2"H X 18 1/4"W

18 CONFER FLOOR POWER POLE, 2 5/8W X 2 5/8D X 13H

4 CONFER POWER DUPLEX CIRCUIT 1, (BOX OF 6)

4 CONFER POWER DUPLEX CIRCUIT 2, (BOX OF 6)

4 CONFER POWER DUPLEX CIRCUIT 3, (BOX OF 6)

4 CONFER POWER DUPLEX CIRCUIT 4, (BOX OF 6)

12 CONFER POWERPAC BLK TO BLK HARNESS, 27" WIDE

18 HEIGHT ADJUSTABLE RECT TABLE, w/SQ LEG BASE, GUNMETAL FINISH, W/GMT, 29.5DX70W, PROGRAMMABLE CONTROL PAD

18 36" DESK CABLE ORGANIZER TRAY

18 WORKRITE CONFORM TRIPLE, STATIC ARMS, W/O POLE

18 WORKRITE CONFORM 14" POLE BASE, C-CLAMP/GROMMET

36 WORKRITE CONFORM EXTENSION ARM (EXTENDS MONITOR ARM REACH BY 10.5")

2 DOUBLE-DOOR STORAGE CABINET 3-HIGH, 18D X 42W

1 HIGH PRESSURE LAMINATE LATERAL FILE TOP 18D X 84W

TYPICAL A

1 HEIGHT ADJ RECT TABLE, w/SQ LEG BASE, GUNMETAL FINISH, NO GMT, 29.5DX58W

1 CENTER DRAWER, BLACK ONLY

1 WORKSURFACE SUPPORTING PEDESTAL, 6"/6"/12"

1 WORK SURFACE, RECTANGULAR NO GMT 24D X 84W

1 SQUARE U-SHAPED WORKSURFACE SUPPORT LEG, 24"W

1 SQUARE WORKSURFACE POST LEG 2" X 2"

1 36" DESK CABLE ORGANIZER TRAY

TYPICAL B

1 HEIGHT ADJ RECT TABLE, w/SQ LEG BASE, GUNMETAL FINISH, NO GMT, 29.5DX58W

1 MOBILE PEDESTAL, 12/12, 21 7/8"D

1 36" DESK CABLE ORGANIZER TRAY

ROOM 139

6 RECT TRAINING TABLE, HPL, FIXED BASE, GLIDES, NO ELEC, NO GMT, 24D X 60W

12 TASK CHAIRS, UPH SEAT&BACK, #6-SWIVEL MECH, T-ARMS PART

1 LAMINATE LECTERN, 18D X 36W X 43.75H, GRADE 1 LAMINATE

BENCHING AND STORAGE

5 TechWorks or equivalent, 60"W x 48"H Upper Frame 5 TechWorks or equivalent, 60"W x 18"D ESD Fixed Shelf 5 TechWorks or equivalent, 60"W x 30"D x 26-38"H Adjustable Bench w/ESD laminate 2 TechWorks or equivalent, Service Bar 60"; 15amp Power Strip, 12outlets, 15' Cord 5 TechWorks or equivalent, Partial base shelf 60"W x 12"D

7 TechWorks or equivalent, ESD Wrist Strap 7 TechWorks or equivalent, ESD Grounding Jack 7 TechWorks or equivalent, ESD Grounding Bar 2 TechWorks or equivalent, 60"W x 30"D x 26-38"H Adjustable Rectangular Table w/ESD laminate 2 Laptop Cart - Stores up to 24 laptops

ROOM 143

3 PACK DOUBLE-DOOR STORAGE CABINET 5-HIGH, 42"W

ALL ROOMS

41 TASK CHAIR - MESH BACK, w ADJ ARMS, PART

GRADE B EPU POLYURETHANE/PSEUDO-LEATHER SEAT: MOMENTUM CANTER: ONYX

Manufacturer Requirements:

Certification Manufacturers must be ISO certified.

Product Offering Product solution must provide an integrated offering of systems furniture, panel components, storage and freestanding furniture

Lead-time Lead time for standard products to be 4 weeks or less. Extended lead times apply to wood veneers.

Specials Manufacturer must be responsive in accommodating unique requirements.

Warranty Manufacturer will provide a limited lifetime warranty on products.

Product Requirements:

Pedestals-Freestanding, Support, and Mobile:

• Shall meet or exceed ANSI/BIFMA standards and guidelines

• Pedestals shall offer a choice of drawer configurations, 612, 3612, 6612, and 1212

• Cabinet must be welded and mechanically fastened construction

• Pedestal shall have a finished front, back, sides and skirt

• Pedestal drawers shall have five sides

• Pedestal wrapper shall consist of 22-gauge steel

• Pedestal top (where applicable) shall consist of 18-gauge steel

• Pulls shall be full width, and available in either a bevel pull or 4 applied pulls

• Shall have 4 adjustable glides for leveling with 1-5/8” adjustment

• Mobile pedestals must have a pull handle on the lock strip

• Pedestals steel finish shall be in 22 trim colors which are powder coated

• Drawer slides will be steel ball bearing construction for durability

• Freestanding Depths: 18-7/8”, 21-7/8”, 27-7/8”

• Work Surface Supporting Depth: 21-7/8”

• Mobile Depth: 21-7/8”

• Hanging Depth: 17-7/8” and 21-7/8”

• Width: 15-1/4”

• Height: 27-3/4”

• 612 Mobile Ped Height: 21”

• Hanging Ped Height: 19-3/8”

• Project Cart: 15-1/4” Depth x 23-1/2” Width x 17” Height

Height Adjustable Tables:

High Quality + Trade Agreement Act Compliant (Not made in China) Table bases have passed the 2014 BIFMA x5.5 test requirements and they don’t require the crossbar in the back for structural support, providing a cleaner look. Comes standard with a dual motor and this translates to better speed and quieter performance.

WARRANTY:

Electrical components-2 years Structural components (legs, feet, supports)-10 years.

Standard Height Ranges Include:

Mechanism Height Range Electric – 24” – 49.5” (without top) 25.5 total inches

Standard Adjustability Options:

- Electric, programmable control pad with-digital height read out, 4 memory location.

Vertical Column/Leg Shape – Square 2 ¾” x 2 ¾”

Gauge of Steel:

Gauge of steel for the Top Support: 14 Gauge of steel for the Foot: 4 Gauge of steel for Leg Column: 14 Gauge of steel for Support: 14

Maximum weight 250lbs

Fabric-Covered Acoustical Panels:

Panels shall be UL Listed Panels shall be Class A fire-rated in accordance with ASTM-E84-Latest Edition Panel frame construction for non-inserted panel:

Shall consist of a minimum of 20-gauge cold rolled steel.

Shall be welded and coated with a light coat of electrostaticaly-applied polyester paint to inhibit rust.

Panels to be available in a standard range of heights and widths including:

Heights: 30”, 42 ”, 48”, 54”, 62 ”, 66 ”, 78”, 84” Widths: 12 ”, 18 ”, 24”, 30 ”, 36 ”, 42”, 48”, 60 ” Panels shall be available with either single or double sided electrical and communications access at base.

Shall have optional factory installed electrical power blocks.

Panels shall be available with optional hardwired base.

Panels shall have a hand removable top cap.

Panel Core:

Standard panel shall consist of two layers of flame retardant fiberglass on outside and one layer in middle providing a NRC of no less than .75 and a STC rating no less than 10.

High performance panel shall consist of two layers of flame retardant fiberglass on outside and two layers in middle providing a NRC of no less than .80 and a STC rating no less than 20.

Outside layer of core material must be tackable.

Full Open Framed Panels:

Panels shall be UL Listed Panels shall be Class A, B, or C rated with tempered glass in accordance with ASTM-E84-Latest Edition Shall provide visual access and reduce eye strain Frame shall consist of aluminum and steel frame Steel must have a minimum hardness of 75 Rockwell B Shall be mechanically fastened together and zinc coated to inhibit rust to be made up of aluminum extrusions Glazed insert to be supported by aluminum extrusions Panels to be available in a standard range of heights and widths including:

Heights: 62”, 66”, 78”, 84” Widths: 12”, 24”, 30”, 36”, 42”, 48”

Executive Desks:

• Vinyl edge shall be 3mm thick and available in either flat or fluted detail

• Face to have 025” thick vertical grade HPL and a 020” thick polybak backer

• Desks to have a minimum of 1” glide adjustment optional

• Freestanding Desks shall include a half modesty panel as standard, a full modesty panel is

• Grommets available on all tops

• Laminate to have embossed wood grain

• Work surface shall be capable of supporting loads consistent with ANSI/BIFMA specifications

• Surfaces shall be 1.5" thick with a core of 45 lb density particleboard

Double Door and Wardrobe Storage Units:

• Heights: 65 3/4” (with Top)

• Width: 36”

• Depth: 24” (with Top)

• Full Double Door and Wardrobe Sizes:

• Units ship assembled

• Units shall be capable of keying alike and master keying to other components

• Available in a minimum of 3 pull options

• Drawer fronts to have 1mm edge band

• Unit to be available in a range of standard laminates (at least 15)

• Shelves to be adjustable in 2 ½” increments

• Door hinge to be chrome and have a minimum open angle of 94 degrees 35mm fluted dowels

• Hardware connection to be 24mm direct mounting screws, metal quarter turn cams, and 8 x

• Shall have 4 adjustable glides for leveling with 1-5/8” adjustment

• Full Depth Double Doors and Wardrobes come with an integrated top

• Shall be available in 2- and 5-high configurations

• Shall meet or exceed ANSI/BIFMA standards and guidelines

Mayline Techworks Benches (or equivalent):

ESD WORKSURFACES

POWER STRIPS CAN BE ADDED

STORAGE OPTIONS CAN BE CONFIGURED AT 1" INCREMENTS ABOVE WORKSURACE

CAN BE INSTALLED AT SITTING OR STANDING HEIGHT 26-38"H

ORGANIZER FRAMES CAPABLE OF SUPPORTING 400 LBS EACH

14-GAUGE STEEL LEGS SUPPORT 1,000 LBS PER BENCH

Triple Static Monitor Arms w/ Arm Extensions:

Supports three monitors 0–16 lb. each Maximum monitor height: Pole dependent Articulation range: 0″ (static arm) Forward reach: 17" (6.5″ standard + 10.5" extension arm) Stowed depth: 6.5″ Monitor : Tilt: +90°/-45° Pivot: +/-90° Rotation: +/-90° Standard VESA (75 mm & 100 mm) Available in silver Warranty: 10 year

Rationale:

Furniture required to furnish all offices and facilitate operations in the 272d Cyber Operations Squadron’s new facility located in building 6922.