REVISED_DOS_-_Corrosion_Prevention_&__Control_23_Aug_2018.pdf

DESCRIPTION OF SERVICE

FOR

VEHICLE CORROSION PREVENTION AND CONTROL

SELFRIDGE AIR NATIONAL GUARD BASE, MICHIGAN (SANGB)

23 Aug 2018

1. Description of Service:

1.1. Perform corrosion prevention and control measures on vehicles and vehicular equipment listed in Technical

Exhibit 1. Services shall be performed at Contractor’s facilities. Contractor must be located within 25 miles of SANGB, MI. Government employees will transport the vehicles to the contractor’s location.

1.1.1. The contractor shall identify and perform corrosion prevention and control measures that restore the vehicles listed in Technical Exhibit 1 to a condition designed to; prevent significant vehicle deterioration under existing usage environments at SANGB, enhance safety, and extend vehicle service life. The measures detailed in Technical Exhibit 1 are not a definitive list of actions to be taken, only an estimate of the work that may be required.

1.2. Minimum technical requirements:

1.2.1. The contractor shall replace the corroded section of a body component with an industry standard metal using a cut and weld method, or replace the entire component. Automotive body fillers shall not be used as the primary corrosion repair action, but may be used to cosmetically prepare the repaired surface for painting.

1.2.2. All paints, primers and coatings shall be applied in accordance with manufacturer’s recommendations for paint, primers and coatings.

1.2.3. Paint shall be blended using current blending technology, and blended areas shall match surrounding painted surfaces.

1.2.4. The contractor shall ensure all removed and replaced hardware is corrosion protected if originally provided corrosion protection by the original equipment manufacturer.

1.2.5. The contractor shall ensure the vehicular equipment shows no evidence of overspray from contractor applied paint, rustproofing compound, or undercoating compound.

1.3. Vehicle scheduling shall be coordinated with the Government POC. Contractor shall schedule twenty-four hours in advance of pick-up/delivery of Government vehicles.

1.4. Unless otherwise coordinated with the Government POC, the contractor shall complete services within twenty-one (21) days of vehicle delivery or pick up.

1.5. Contractor shall coordinate with government POC return of completed vehicles. The Government will inspect all completed vehicles upon their return to SANGB.

2. General

2.1. Base Entry. The contractor shall coordinate base access with the Government Point of Contact (POC). The award of this contract does not create a right to have access to any military installation.

2.2. Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays.

2.3. The contractor and its employees shall comply with all base security and traffic regulations. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges. All contractor employees shall carry proper identification with them at all times while on Selfridge ANGB.

2.4. Physical Security. The contractor shall ensure all government equipment and materials in their possession are secured.

2.5. Safety/Environmental: The contractor shall comply with all federal and state Occupational Safety and

Health Administration (OSHA) requirements and standards, technical orders, regulations, and referenced publications as published in the OSHA 29 CFR.

3. Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government will provide the 18 vehicles identified in attached Exhibit.

4. Contractor Manpower Reporting Application (CMRA):

4.1. The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Air Force via a secure data collection site.

4.2. The contractor shall completely fill in all required data fields using the following web address:

http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk at http://www.ecmra.mil.

UIC Code: FFKNTO Issuing Office DoDAAC: W912JB

TECHNICAL EXHIBIT 1

Estimated Workload Data

This estimate is not a definitive list of actions to be taken, only an estimate of the work that may be required.

1 1998 FORD RANGER-

BLUE

REG# 98B00319

PICK UP BOX

REPL RT SIDE PANEL 6 FOOT BED W/O WHL OPENING MLDG

REPL A/M CAPA TAIL GATE

REPL LT SIDE PANEL 6 FOOT BED W/O WHL OPENING MLDG

REPL PANEL ADHESIVE KIT

REAR BUMPER

RPR RT CAB CORNER AND ROCKER

REPL UNDERCOAT FLOOR BOARDS

RPR 4 WHEELS

REPL CORROSION PROTECTION

2 1998 FORD F-150-

REG# 98B01564

RPR 4 WHEELS

RPR LT FLOOR

RPR LT ROCKER

RPR RT ROCKER

FRONT BUMPER

RPR BUMPER 2WD GRAY

PICK UP BOX

RPR TAIL GATE

RPR RT SIDE PANEL 8 FOOT BED W/O WHL OPENING

RPR BUMPER PAINTED

3 1998 FORD F-150 -

REG# 98B01567

CAB

RPR RT UNISIDE ASSY

REPL RT SIDE PANEL 8 FOOT BED W/O WHL OPENING

REPL LT SIDE PANEL 8 FOOT BED W/O WHL OPENING

RPR CUT & TRANSFER A/M FUEL DOOR

REPL RT UPPER MOLDING 8 FOOT BED

REPL LT UPPER MOLDING 8 FOOT BED

RPR LOOSEN RT FENDER

REPL PANEL GLUE

4 2003 FORD RANGER -

WHITE

REG# 03B01211

PICK UP BOX

REPL RT SIDE PANEL 6 FOOT BED W/O WHL OPENING MLDG

REPL LT SIDE PANEL 6 FOOT BED W/O WHL OPENING MLDG

RPR RT ROCKER AND CAB CORNER

RPR LT ROCKER AND CAB CORNER

RPR DETRIM AS NEEDED FOR ACCESS

REPL PATCH FLOOR AS NEEDED BOTH SIDES

5 2004 FORD F-350

REG# 04B00623

HOOD

RPR HOOD

FENDER

BLND RT FENDER

REPL RT NAMEPLATE "F350 SUPER DUTY"

BLND LT FENDER

REPL RT NAMEPLATE "F350 SUPER DUTY"

FRONT DOOR

REPL RT DOOR SHELL W/O KEYLESS

REPL LT DOOR SHELL W/O KEYLESS

REAR DOOR

RPR RT DOOR SHELL

RPR RT ROCKER

RPR LT ROCKER

BLND LT OUT PANEL

REPL A/M CAPA TAIL GATE

RPR LT SIDE PANEL 8 FOOT BED SINGLE WHEEL

6 2004 FORD F-350 -

4WD

REG# 04B01379

REPL RT NAMEPLATE "F350 SUPER DUTY"

FRONT DOOR

REPL RT DOOR SHELL W/O KEYLESS

REAR DOOR

BLND RT OUTER PANEL

REPL BED OLT KIT

REPL RT SIDE PANEL 8 FOOT BED SINGLE WHEEL

REPL RT WHEELHOUSE PANEL SINGLE REAR WHEEL

REPL TAIL GATE MLDG BLACK

REPL LT SIDE PANEL 8 FOOT BED SINGLE WHEEL

REPL LT WHEELHOUSE PANEL SINGLE REAR WHEEL

REFN FUEL DOOR

7 2004 FORD RANGER -

WHITE

REG# 04B01517

RPR 4 WHEELS

RPR LT ROCKER PANEL

RPR RT ROCKER PANEL

RPR RT CAB CORNER

REPL RT FENDER W/O WHEEL OPENING MOLDING

REPL RT NAMEPLATE "RANGER XL"

REPL RT SIDE PANEL 6 FOOT BED W/O WHEEL OPENING

MLDG

8 2005 CHEVY

COLORADO

REG# 05B01982

CAB

REPL RT UNISIDE ASSY

REPL LT UNISIDE ASSY

RPR RT INNER ROCKER

RPR LT INNER ROCKER

RPR LT SIDE PANEL

REFN FUEL DOOR

9 2005 CHEVY

SILVERADO

REG# 05B02338

REPL RT ROCKER PANEL

REPL LT ROCKER PANEL

RPR LT CAB CORNER

RPR RT FENDER CHEVROLET US BUILT IN W/O AREA

RPR RT OUTER PANEL

RPR LT SIDE PANEL ASSY

10 2005 CHEVY

REG# 05B02341

RPR 4 WHEEL

RPR RT DOOR LOWER INSIDE

REPL PATCH FLOOR

RPR RT FENDER CHEVROLET US BUILT

REPL RT ROCKER

REPL LT ROCKER

RPR LT CAB CORNER

RPR RT SIDE PANEL ASSY

RPR TAIL GATE

RPR LT SIDE PANEL ASSY

RPR BUMPER PAINTED SILVER

11 2005 CHEVY

REG# 05B02346

REPL A/M CAPA RT FENDER CHEVROLET US BUILT

WHEELS

REPL RT/REAR HUB CAP TYPE 1 PAINTED WHEEL

REPL RT ROCKER AND CAB CORNER

REPL LT ROCKER AND CAB CORNER

12 2006

INTERNATIONAL

BKT TRK

REG# 06C00095

RPR BLAST AND REFINISH RACK

RPR BLAST AND REFINISH RT FUEL TANK

RPR UTILITY BOXES AND JACK LEGS AS NEEDED

RPR BOOM (BLUE SECTION ONLY)

REPL REFLECTOR DECALS

RPR BLAST AND REFINISH BATTERY BOX

REFN 2 INSIDE BOX WALLS

13 2009 CHEVY

REG# 09C00641

RPR TOUCH UP RT FENDER

REPL UNDERCOAT FLOOR

RPR REPAIR RUST

14 2007 CHEVY EXPRESS

REG# 07B02637

HOOD

RPR HOOD

RPR RT DOOR INNER

RPR LT DOOR INNER

RPR LT ROCKER AND CAB CORNER

RPR REFINISH REAR BUMPER

RPR 4 WHEELS

REPL DOOR PROP

REPL RESKIN REAR DOORS X 2

15 2011 CHEVY

COLORADO

REG# 11B00357

RPR BUMPER PAINT TO MATCH

RPR LT SIDE PANEL

RPR TAIL GATE

REPL RT SIDE PANEL

REPL PANEL ADHESIVE

RPR BUMPER W/O Z82: TRAILERING PKG ‐ PAINT TO MATCH

16 2011 KENWORTH RPR 2 SNOW PLOW LIGHT BRACKETS

DMP TRK

REG# 11D00248

RPR MISC AREAS

REFN BOX

REPL 4‐3" REFLECTORS

RPR 2 REAR WHEEL FWD MUD FLAPS, STEEL

RPR RT UTILITY BOX

REPL MASK

17 BLUE BIRD BUS

REG# 08B04117

REPAIR RIGHT SIDE OF 2008 BLUE BIRD BUS (08B4117)

REMOVE & INSTALL RR WHL OPENING MOLDING & RELATED PARTS

REPLACE RT REAR & RT Front CENTER SKIRT PANEL

REPAIR SKIRT PANEL SUPPORT

REMOVE & INSTALL AMEBER REFLECTOR

REPAIR LARGE CENTER RUB RAIL

REPLACE UPPER RUB RAIL AT WINDOWS

REPLACE RUB RAIL CAPS

REPAIR RT WINDOW PANEL

REMOVE REFLECTOR TAPE

REPLACE NEW REFLECTOR TAPE

REPLACE MISC RIVITS AND FASTENERS

PAINT COMPLETE AREA OF REPAIR.