Attachment 01 - Performance Work Statement.pdf

PDF 671 KB Posted

Attached to
New Mexico Army National Guard (NMARNG) Dining Facility (DFAC) Food Services
Solicitation number
W912J327Q1001
Issued by

About this file

This is a Performance Work Statement (PWS) for Dining Facility (DFAC) Services at the Regional Training Institute (RTI) located at the Santa Fe Training Complex in Santa Fe, New Mexico. The contract is a non-personal services arrangement for food preparation, meal service, sanitation, and subsistence accountability operations supporting military training programs including the Basic Leader Course (BLC), Officer Candidate School (OCS), 88M Motor Transport Operator Training, and other military courses.

The Contractor shall provide comprehensive food service operations including meal planning based on Government-furnished menus, receipt and inspection of Government-furnished raw subsistence materials, preparation and cooking of meals in strict accordance with Armed Forces Recipe Service (TM 10-412) standards, cafeteria-style meal service with throughput rates of 8-10 diners per minute, portable "Grab-and-Go" field meal preparation, rapid cooling and leftover management, and facility sanitation and warewashing. The Contractor is responsible for all personnel, equipment (except Government-furnished major equipment), cleaning supplies, uniforms, and tools. The Government furnishes the DFAC facility workspace, all raw food subsistence, major food preparation equipment, dumpster pickup, and grease-trap pumping services. The Period of Performance consists of one 12-month Base Year and two optional 12-month years, with the active Base Year running February 1, 2027 through September 30, 2027, comprising 196 operational cooking days, 16 preparation days, and 16 replenishment days. Standard meal service windows are 0630-0800 (breakfast), 1130-1300 (lunch), and 1700-1830 (dinner), though times may vary to accommodate training schedules. The Contractor must maintain a Dining Facility Manager with minimum three years supervisory experience and ServSafe certification, Lead Cooks with two years commercial/military food preparation experience, and Line Cooks with one year relevant experience. All personnel require food handler certifications and English language proficiency. Key performance standards include 100% food safety temperature compliance, 98% recipe adherence, zero foodborne illness incidents, 95% serving line throughput compliance, and 100% subsistence accountability with minimal waste. The Contractor must submit a Quality Control Plan within 10 days of award, staffing and mobilization plan within 10 business days, and various operational documentation including daily production schedules, temperature logs, food waste logs, and personnel qualification records. Late cancellations occurring within 72 hours of the scheduled preparation day are compensable at the established daily contract rate for authorized preparation days only, with detailed reconciliation reports required within three business days. Emergency headcount increases within 72 hours must be accommodated using existing on-site inventory and available labor without penalty, though additional labor hours require pre-authorization in writing.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PERFORMANCE WORK STATEMENT (PWS)

FOR

515th Regiment RTI (Regional Training Institute Dining Facility (DFAC) Services

Santa Fe Training Complex Santa Fe, NM

1.0 General: This is a non-personal services contract to provide Dining Facility (DFAC) food preparation, meal service, sanitation, and subsistence accountability operations in support of the Regional Training Institute (RTI). The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn, is responsible to the Government.

1.1 Scope: The Contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform, manage and operate the RTI DFAC during scheduled training cycles through the performance of this contract. Responsibilities encompass submitting technical subsistence quantity recommendations based on Government menus and headcounts; receiving, inspecting, and storing Government-furnished raw subsistence; preparing and cooking meals strictly in accordance with Armed Forces Recipe Service (AFRS) standards; serving cafeteria-style mainline meals and preparing portable “Grab-and-Go” field meals; executing rapid cooling and leftover management protocols; maintaining complete kitchen, scullery, and dining room sanitation; and conducting weekly/cycle physical subsistence inventories as defined in this PWS. The Contractor shall independently determine the appropriate staffing levels, labor mix, and shift schedules required to achieve all performance standards, meal volumes, and throughput rates specified in this PWS. The Contractor shall independently determine and maintain the appropriate staffing levels, labor mix, and personnel schedules necessary to successfully achieve the performance-based outcomes and meal service throughput standards specified in this PWS.

1.1.1 Objectives: The primary objective of this acquisition is the safe, sanitary, timely, and nutritious preparation and service of cooked and portable meals to military personnel undergoing training, utilizing 100% Government-Furnished raw subsistence in strict accordance with Army food service regulations and federal food safety codes:

1.1.1.1 Deliver nutritionally balanced, properly prepared, and temperature-compliant meals on schedule with zero delays to military training timelines.

1.1.1.2 Maintain strict accountability and preservation of Government-Furnished

Subsistence (GFM) with minimal waste and zero unauthorized removal.

1.1.1.3 Maintain a 100% sanitary dining and kitchen environment compliant with Tri-

Service Food Code standards with zero foodborne illness incidents.

1.1.1.4 Ensure all operations are conducted by experienced, certified culinary and supervisory personnel without Government micromanagement of Contractor staffing headcounts or schedules.

1.2 Background: The Regional Training Institute (RTI) conducts resident military training courses, including the Basic Leader Course (BLC), Officer Candidate School (OCS), 88M Motor Transport Operator training, and other military training courses. To sustain Soldier physical readiness, morale, and performance, the Department of the Army requires professional food services at the RTI Dining Facility (DFAC). These services are strictly episodic and are only required during scheduled military training cycles, unit drill weekends, and annual training events as outlined in this PWS.

1.3 Period of Performance (PoP): The Period of Performance shall be one (1) 12-month Base Year and two (2) 12-month Option Years.

1.4 General Information:

1.4.1 Place and Performance of Services: The Contractor shall perform all food services at the Regional Training Institute (RTI) Dining Facility (DFAC), located on the Santa Fe Training Complex at 21A Bataan Blvd, Santa Fe, New Mexico, 87508, during scheduled training cycles.

1.4.1.1 The meal serving windows listed below represent the standard operational periods for the dining facility; however, these times may vary week-to-week to accommodate specific training schedules, range operations, or field exercises as dictated by the active training calendar

1.4.1.1.1 Breakfast: 0630 to 0800 hours

1.4.1.1.2 Lunch 1130 to 1300 hours

1.4.1.1.3 Dinner 1700 to 1830 hours.

1.4.1.2 Regular operations may be suspended when the Government facility is officially closed due to local or national emergencies, administrative closings, or similar Government-directed installation closures. Teleworking is not authorized.

1.4.1.3 Performance shall be at the Regional Training Institute (RTI) located on the Santa Fe Training Complex at 21A Bataan Blvd. Santa Fe, New Mexico, 87508. The Contractor shall always maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential. Teleworking is not authorized.

1.4.1.6 Reserved

1.4.1.7 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by Contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the Contractor employee’s installation driving privileges.

1.4.1.8 The Contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All Contractor employees shall always carry proper identification with them and shall be subject to such checks as may be deemed necessary. The Contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of Contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays and Schedule Variations: The active training schedule will dictate if food services are required during federal holidays or weekend periods. The Contractor shall perform services on any of the recognized United States (US) holidays listed below if a scheduled training cycle is actively in session:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The Contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor’s QCP is how it assures itself that its work complies with the requirements of the contract. As a minimum, the Contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award. After acceptance of the QCP, the Contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Quality Assurance (QA): The Government will evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the Contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Installation Access and Security Requirements. The Contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The current form being used by the NMARNG is a UVAP/UVAR (Unescorted Visitor Access Request), as shown in Attachment E. The Contractor and all associated Sub-Contractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The Contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in Contractor security matters or processes.

1.4.5.1 Common Access Card (CAC). For contractors requiring (CAC): The CAC is the DoD Federal Personal Identity Verification (PIV) credential. Before CAC issuance, the contractor employee requires, at a minimum, a favorably adjudicated Tier 1 or an equivalent or higher investigation in accordance with Army Directive 2014-05. The contractor employee will be issued a CAC only if duties involve one of the following:

(1) both physical access to a DoD facility and access, via logon, to DoD networks on-site or remotely;

(2) remote access, via logon, to a DoD network using DoD-approved remote access procedures; or

(3) physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. At the discretion of the sponsoring activity, an initial CAC may be issued based on a favorable review of the FBI fingerprint check and a successfully scheduled Tier 1 investigation at the Office of Personnel Management.

1.4.5.1.1.Sponsorship and enrollment information about each applicant must be registered in the Defense Enrollment Eligibility Reporting System (DEERS) through either the Real-Time Automated Personnel ID System (RAPIDS) using the DD Form 1172-2 or the Trusted Associate Sponsorship System (TASS).

1.4.5.1.2 Homeland Security Presidential Directive (HSPD)-12 Background Investigation Requirements: The contractor shall ensure that all contractor and subcontractor personnel whose duties require CAC card issuance obtain them and shall process all CAC card applications. The contractor shall ensure that all employees requiring an initial background investigation complete a Personnel Security Investigation Portal (PSIP) form online, as soon as possible, and that this form is forwarded to the COR immediately. The COR will review the form for completeness and accuracy and forward it to the National Guard Bureau (NGB) Personnel Security manager who will initiate the investigation process via the PSIP. Contractor personnel will then receive two e-mail messages; the first will confirm that the investigative service provider has received the request, and the second will provide instructions for the completion of the appropriate form via the Electronic Questionnaires for Investigations Processing (e-QIP) system.

Upon completion of the e-QIP questionnaire and submittal of all required documents, including fingerprint card to the security manager, the background investigation (BI) will be initiated. The contractor shall ensure immediate compliance with all instructions regarding background investigation processing, including those provided verbally, by e-mail or via a Government system. The contractor is cautioned that the entire process from submittal of the PSIP form to return of the FBI fingerprint check may routinely take from two to six weeks and shall factor this lead time into its hiring/placement process.

The contractor shall make all reasonable efforts to ensure that contractor employees meet CAC eligibility standards upon assignment to the contract and shall be held responsible for delays, failure to meet performance requirements or decreases in efficiency in accordance with the applicable inspection clause.

1.4.5.1.3 Trusted Associate Sponsorship System (TASS): The contractor shall process CAC applications through the TASS, the procedures for which are described below.

Although there is no requirement for the contractor to designate a “Corporate Facility Security Officer" (FSO) to serve as its single point of contact for the BI, the TASS application process and other CAC and security-related matters, such designation facilitates these processes. If a Corporate FSO is not established, all contractor employees requiring a CAC will be required to process their own applications. The submission process for CAC applications is as follows:

1.4.5.1.3.1. The contractor's FSO or contractor employee shall submit requests for a CAC via email to the designated TASS Trusted Agent (TA). The TASS TA for this requirement will be: (If the TA has been designated, show the TA’s name and contact information; otherwise, insert “TBD.”)

1.4.5.1.3.2. The Government will establish a TASS application account for each CAC Request and will provide each contractor employee a user ID and password, via email, to the contractor’s FSO or contractor employee. The FSO or contractor employee shall access the TASS account and complete the CAC application (entering/editing contractor information as applicable) at: https://tass.dmdc.osd.mil/tass/. The contractor’s FSO or contractor employee shall follow up to ensure that the TA is processing the request.

1.4.5.1.3.3. The Government will inform the contractor's applicant, via email, of one of the following:

1.4.5.1.3.3.1. *Approval. Upon approval, the information is transferred to the DEERS database and an email notification is sent to the contractor with instructions on obtaining their CAC. The contractor proceeds to a RAPIDS station (RAPIDS Site Locator:

http://www.dmdc.osd.mil/rsl/).

1.4.5.1.3.3.2. *Rejection. The Government, in separate correspondence, will provide reason(s) for rejection.

1.4.5.1.3.3.3. Return. Additional information or correction to the application required by the contractor employee.

*The contractor shall maintain records of all approved and rejected applications.

1.4.5.1.4. At the RAPIDS station, the RAPIDS Verification Officer will verify the contractor employee by Social Security Number (SSN) and two forms of identification.

Identity source documents must come from the list of acceptable documents included in Form I-9, OMB No. 1615-0047, "Employment Eligibility Verification". Consistent with applicable law, at least one document from the Form I-9 list shall be a valid (unexpired) State or Federal Government-issued picture ID. The Identity documents will be inspected for authenticity and scanned and stored in the DEERS upon issuance of an ID. The photo ID requirement cannot be waived, consistent with applicable statutory requirements. The Verification Officer will capture primary and alternate fingerprints, picture, and updates to DEERS, and will then issue a CAC. Issued CACs will be valid for no longer than three years, or until the individual's contract end date (inclusive of any options), whichever is earlier.

1.4.5.1.5 The contractor shall manage requests for new or renewal CAC cards in sufficient time to ensure that all contractor employees have them when needed to perform work under this contract. The contractor shall provide at least 10 calendar days advance notice to the TA, unless there are extenuating circumstances approved by the COR or KO.

1.4.5.1.6 The contractor shall return issued CACs to the DEERS office upon departure or dismissal of each contractor employee, and shall obtain a receipt for each card and provide it to the TA/COR. (Remove as a deliverable in Technical Exhibit 2 if CACs will not be issued.)

1.4.5.1.6.1 Failure to comply with these requirements may result in withholding of final payment.

1.4.5.1.6.2 Reserved

1.4.5.2 For Contractors that do not require a CAC, but required access to a CoD facility or installation: Contractors and all associated sub-Contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.4.5.3 Antiterrorism Training Awareness (AT) Level 1: All Contractor employees, including Sub-Contractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level 1 training within 30 calendar days after contract start date and within 30 calendar days of new employees commencing performance. The COR will provide an AT Level 1 Instructor for all new employees. The Contractor shall submit certificates of completion for each affected Contractor and Sub- Contractor employee to the COR within 15 calendar days after completion of training by each employee or Sub-Contractor personnel. AT Level 1 awareness training is available at the following website: https://jko.jten.mil/courses/atl1/launch.html.

1.4.5.4 iWATCH Training: The Contractor and all associated Sub-Contractors with an area of performance within an Army-controlled installation, facilities or area shall brief all employees on the local iWATCH program (training standards provided by the requiring activity Antiterrorism Officer (ATO)). This local developed training shall be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR or the KO. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance. The Contractor shall report completion for each Contractor employee and Sub-Contractor employee to the COR, within 15 calendar days after completion of training.

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the Contractor is advised that any time Contractor personnel place or receive a call they are subject to COMSEC procedures. The Contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The Contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings. Practice safe network and Internet operating principles and take no actions that threaten the integrity of the system or network.

1.4.5.6 Reserve

1.4.5.7 Reserve

1.4.5.8 Reserve

1.4.5.9 Reserve

1.4.5.10 Reserve

1.4.5.11 OPSEC (Operational Security) Training: In accordance with AR 530-1, Operations Security, new Contractor employees shall complete Level I OPSEC training within 30 calendar days of their reporting for duty and annually thereafter. The COR will provide an OPSEC Instructor for all new employees. The Contractor shall submit certificates of completion for each Contractor employee to the COR within 15 calendar days after completion of training. Level 1 OPSEC training is available through the Unit’s OPSEC Officer. at https://securityawareness.usalearning.gov/opsec/index.htm.

1.4.5.12 Reserve

https://jko.jten.mil/courses/atl1/launch.html

1.4.5.13 Reserve

1.4.6 Physical Security. The Contractor shall safeguard all Government property provided for Contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. implement methods of ensuring that no keys/key cards issued by the Government are lost or misplaced or are used by unauthorized people. No keys issued by the Government shall be duplicated. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall include procedures covering key control in the QCP.

1.4.6.1.1 The Contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the COR.

1.4.6.1.2 In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction by the KO, re-key or replace the affected lock or locks;

however, the Government, in its option, may replace the affected lock or locks or perform re-keying. When the Government replaces or re-keys the locks, the Government will deduct the total cost of lock replacement or re-keying from the monthly payment due the Contractor. In the event a master key is lost or duplicated, the Government will replace all locks and keys for that system and will deduct the total cost from the monthly payment due the Contractor.

1.4.6.1.3 The Contractor shall prohibit the use of the Government issued keys/key cards by any person other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of people other than Contractor employees engaged in the performance of services in those areas, or personnel authorized entrance by the KO.

1.4.6.1.4 The Contractor shall ensure that its employees lock all areas for which they possess a key when they are not using the area and at the close of the work period.

1.4.6.1.5 The Contractor shall ensure that all employees comply with the local installation requirements for vehicle registration and operation on the military facility.

Any vehicle operated by the Contractor or its employees in performance of this contract shall have the minimum liability coverage required by the State of New Mexico.

1.4.6.2 Reserve

1.4.7 Reserve

1.4.8 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5.

The KO, COR and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor’s performance. At these meetings, the KO will apprise the Contractor of how the Government views the Contractor’s performance and the Contractor shall apprise the Government of problems, if any, being experienced. The Contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The Contractor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the Contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that Contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure Contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the Contractor.

1.4.10 Identification of Contractor Employees: All Contractor personnel attending meetings, answering Government telephones and working in other situations where their Contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The Contractor shall ensure that all documents or reports produced by Contractor personnel are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. The Contractor’s status as a “Contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “Contractor” displayed.

1.4.10.1 The Contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The Contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and Contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The Contractor shall take appropriate action, up to and including termination, against employees or sub-Contractors that violate the US Government policy as described at

FAR 22.17.

1.4.12 Reserved

1.4.13 Reserve

1.4.14 Organizational Conflicts of Interest (OCI): The Contractor and Sub-Contractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The Contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.14.1 The Contractor shall not use Government facilities or other Government property in connection with conducting a private practice.

1.4.14.2 Confidentiality of Information. Unless otherwise specified, all financial, statistical, personnel, and/or technical data which are furnished, produced or otherwise available to the Contractor during the performance of this contract are considered confidential business information and shall not be used for purposes other than performance of work under this contract. The Contractor shall not release any of the above information without prior written consent of the KO.

1.4.14.3 Inquiries. Contractor shall ensure that its personnel do not respond to any media inquiries. Any inquiries from the media shall be immediately relayed to the COR, who will relay them to the ARNG Public Affairs Officer (PAO). There shall be no interviews, comments, or any other response without the knowledge and approval of the PAO. Other than routine inquiries from external agencies, all other inquiries and complaints shall be brought to the attention of the Government’s COR.

1.4.15 Phase In / Phase Out Periods (PIPO): To minimize any decreases in productivity and to prevent possible negative impacts on additional services, the Contractor shall have personnel on board, during the calendar, 5-workday phase in / phase out periods.

During the phase in period, the Contractor shall become familiar with performance requirements in order to commence full performance of services on the contract start date. The Contractor will be required to complete all planning, hiring, training of employees, ordering food and related products, storage inventory, and any other tasks necessary for start-up operations. At the end of the contract period of performance, the Contractor shall share government space and equipment with any follow-on Contractor in order for the follow on Contractor to commence start-up of new contract period of performance without a break in service to the Government from this contract to the next.

1.4.16 Data Rights: The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the Contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Sub-Contractor: One that enters into a contract with a prime Contractor. The Government does not have privity of contract with the Sub-Contractor.

2.1.10 Acceptable Quality Level (AQL): The AQL is a designated value (percent) of defective outcomes/service that the Government indicates will be accepted using acceptable sampling techniques and procedures.

2.1.11 Contracting Officer (KO): An individual with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.

2.1.12 Contracting Officer's Representative (COR): An individual from the functional activity appointed by the Contracting Officer and delegated specific authority to monitor contract performance and to perform specific contract administration functions.

2.1.13 Contract Discrepancy Report (CDR): The CDR is used to formally document unacceptable performance (contract deficiencies and defects against the AQL). The use of CDR becomes the supporting documentation for contract payment deductions, fixed fee deductions, award fee, nonpayment or other actions deemed necessary by the KO.

The CDR will become a part of the official contract file.

2.1.14 Performance Requirements Summary (PRS): The PRS identifies key performance indicators and standards that represent logical service outputs that will be evaluated by the Government to ensure the Contractor is fulfilling the terms of the contract.

2.1.15 Performance Standard: A measurable output or result associated with the performance- based description of a requirement found in the PWS.

2.2 Acronyms:

AEI Army Enterprise Infostructure AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager COR Contracting Officer Representative DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD/DoW Department of Defense/Department of War FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau NMARNG New Mexico Army National Guard OCI Organizational Conflict of Interest PIPO Phase In/Phase Out

PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting TE Technical Exhibit

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: The Government will furnish the necessary workspace for the Contractor to perform services outlined in this PWS. This includes the physical Dining Facility (DFAC), kitchen space, dining room, dry storage, walk-in coolers, walk-in freezers, and restrooms located at the Regional Training Institute (RTI) on the Santa Fe Training Complex at 21A Bataan Blvd, Santa Fe, New Mexico, 87508.

3.1.1 Incidental Property Controls: The physical facility and structural kitchen components are provided as incidental to the place of performance and remain accountable to the Government in accordance with RFO FAR 45.000(b)(5).

3.1.2 Maintenance & Facility Repairs: The Government is responsible for capital maintenance, system repairs, and replacement of structural elements due to normal fair wear and tear. Built-in facility components—including hood exhaust fire systems, grease interceptors, plumbing, HVAC, electrical, and cold storage condensers—will be maintained by the Directorate of Public Works (DPW) or installation facilities Contractors.

3.2 Materials: The Government will provide materials and the initial quantity of expendable/durable supplies as Government Furnished Property (GFP). Specified GFP/M/E/S shall only be used in the performance of this contract. The Contractor shall not be responsible for "fair wear and tear" of GFP. The Government will provide 100% of all food subsistence, bulk ingredients, and beverages as Government Furnished Material (GFM).

3.2.1 Subsistence Requisitioning and Ordering: The COR generates, approves, and places all subsistence orders directly within AFMIS utilizing DoD Subsistence contractor and authorized local dairy/bakery blanket purchase agreements. The Contractor shall provide technical recommendations to the COR on ingredient quantities required based on confirmed headcounts and cyclic menu recipes. The Contractor is strictly prohibited from placing direct financial orders against the Government subsistence contract.

3.2.2 Packaging Materials for Hand-Held Grab-and-Go Meals: The Government shall furnish required food wrapping materials (insulated aluminum foil sheets, deli wrap paper, individual beverage cartons/bottles) via standard subsistence Government contractor.

3.3 Equipment: The Government will provide major food preparation and serving equipment—including convection ovens, tilt skillets, steamers, commercial dish machines, reach-in units, steam tables, serving lines, ice makers, and smallwares/cooking vessels—as Government Furnished Equipment (GFE). Specified GFP/M/E/S shall only be used in the performance of this contract. The Contractor shall not be responsible for "fair wear and tear" of GFP. See Attachment C.

3.3.1 GFE Inventory: All provided equipment will be documented and furnished in accordance with the baseline Government Hand Receipt (DA Form 2062).

3.3.2 Maintenance: The Government is responsible for major maintenance, system repairs, and replacement of GFE due to normal fair wear and tear. The Contractor shall only be responsible for minor operator-level care as defined in Part 4.4.

3.4 Services: The Government will provide dumpster pickup and grease-trap pumping services at no cost to the Contractor. Specified GFP/M/E/S shall only be used in the performance of this contract. The Contractor shall not be responsible for "fair wear and tear" of GFP.

3.5 Utilities: All utilities in the facility—including water, sewer, electricity, and natural gas/propane—will be available for the Contractor’s use in the performance of this contract. The Contractor shall instruct employees in utilities conservation practices. The Contractor shall operate under conditions that preclude the waste of utilities, which include turning off water faucets or valves after using the required amount and shutting down cooking equipment when not actively in use.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the Contractor shall furnish all supplies, materials, tools, equipment, supervision, and resources required to perform the services outlined in this PWS.

4.2 Expendable Cleaning, Sanitation, and Janitorial Supplies: The Contractor shall furnish and maintain expendable cleaning supplies to support food service sanitation and personnel hygiene practices in support of the food operations. This includes food serving gloves, hand towels, commercial-grade dishwashing detergents, rinse agents, chemical sanitizers, test strips, degreasers, delimer solutions, mop heads, sponges, brooms, buckets, scrubbing pads, heavy-duty trash can liners, hand soaps, and paper towels required for kitchen, scullery, and dining room custodial maintenance. All chemicals must be EPA-approved, food-service safe in accordance with TB MED 530, and accompanied by an on-site Safety Data Sheet (SDS) binder maintained by the Contractor.

4.3 Employee Uniforms. The Contractor shall provide working personnel with clean, professional culinary uniforms and visible identification badges. The identification badges shall have at a minimum of the Contractor's name, the employee's first and last name, and the employee’s photo.

4.3.1 Personal Protective Equipment (PPE), and Culinary Tools: The Contractor shall provide aprons, disposable food-service gloves, cut-resistant prep gloves, heat-resistant oven mitts, hairnets, beard restraints, and OSHA-compliant slip-resistant closed-toe footwear. Additionally, the Contractor shall furnish calibrated bi-metallic stemmed or digital food thermometers for staff use in verifying food safety temperatures.

4.4 Operator-Level Care and Minor User Maintenance ("Plug and Play" Standard): The Contractor is responsible for routine operator-level care and preventative cleaning of Government-Furnished kitchen equipment in accordance with manufacturer operating manuals. Under the "Plug and Play" rule, operator-level maintenance includes daily cleaning, descaling, sanitizing, tightening exterior thumbscrews or knobs, washing removable hood/equipment filters, and ensuring proper pre-operation setup. If a mechanical breakdown requires internal disassembly, electrical work, plumbing repair, or refrigeration servicing, the Contractor shall not attempt repairs and shall immediately notify the COR via a formal work order request.

5.0 Requirements: The Contractor shall:

5.1 Basic Services: The Contractor shall provide comprehensive food preparation, meal service, subsistence accountability, and sanitation services at the RTI DFAC to achieve safe, nutritious, appetizing, and timely meals for military trainees in accordance with AR 30-22 (Army Food Program), DA PAM 30-22, TM 10-412 (Armed Forces Recipe Service), and TB MED 530 (Tri-Service Food Code).

5.2 Subsistence Planning, Receipt, Inspection, and Storage

5.2.1 Menu Design and Subsistence Forecasting: The Contracting Officer’s Representative (COR) shall provide menus to the Contractor (see Attachment A for the 5-Week Menu). Based on the approved menus and the training headcounts outlined in paragraph 5.2.1.1, the Contractor shall calculate required raw Government- Furnished Property (GFP) subsistence quantities.

5.2.1.1 Calculations shall utilize TM 10-412 recipe yields (incorporating the authorized 10% preparation buffer). The Contractor shall reconcile these raw calculations against existing on-hand Government-Furnished Material (GFM) inventory and submit accurate, finalized subsistence procurement request worksheets to the COR. These worksheets must detail the exact items and quantities the Government must procure and deliver to the Dining Facility (DFAC) for meal execution.

5.2.1.1.1 Ten Percent (10%) Preparation Buffer: To ensure complete nutritional replenishment for Soldiers undergoing high-intensity military training and to support authorized cadre consumption, the Contractor shall prepare food based on 110%

(+10%) of the confirmed student training headcount. This buffer shall be formally scheduled and tracked on the daily DA Form 3034 (Production Schedule) to ensure inventory reconciliation in AFMIS.

5.2.1.2 Training Schedules and Headcount Lock: Individual training cycles, Annual Training (AT) windows, and Inactive Duty Training (IDT) drill meal requirements shall be authorized and provided to the Contractor via written schedule from the Contracting Officer (KO) or COR no later than fourteen (14) calendar days prior to the performance start date to initiate the menu-planning and ordering cycle. Final expected meal headcounts shall be re-confirmed in writing by the COR with the on-site Contractor DFAC Manager seventy-two (72) hours prior to the first meal served.

5.2.1.2.1 Preparation and Replenishment Days Authorization (Firm-Fixed-Price):

5.2.1.2.1.1 Authorized Operational Window: The Contractor is authorized a maximum window of up to two (2) calendar days immediately prior to the start of each scheduled training cycle for pre-course preparation tasks, and up to two (2) calendar days immediately following the completion of each training cycle for post-course replenishment, deep cleaning, and inventory reconciliation.

5.2.1.2.1.2 Firm-Fixed-Price Scope: Early completion of preparation or replenishment tasks (e.g., finishing prep in one calendar day instead of two) is highly encouraged and shall not result in any downward adjustment, deduction, or penalty to the established contract price. Conversely, no additional compensation shall be provided should the Contractor require more than the authorized days.

5.2.1.2.1.3 Strict Non-Overlap Prohibition: Under no circumstances shall preparation or replenishment activities occur concurrently with, or on the same calendar day as, active meal preparation and dining facility serving services (D/In). These days must be scheduled and executed on separate, dedicated, non-feeding calendar workdays. There shall be no partial-day or half-day allocations.

5.2.1.3. Prior to the 72-Hour Mark: Headcount reductions or cancellations submitted at or before the 72-hour mark incur zero Government financial liability. The Contractor shall immediately adjust labor schedules to prevent overstaffing and revise pending GFM order requests with the COR.

5.2.1.4 Standard Cancellation Notice: The Government shall provide the Contractor with written notification of cancellation at least seventy-two (72) hours prior to the scheduled start of the first authorized Preparation (Prep) Day for that cycle. If timely notice is provided, the Contractor shall not invoice, and the Government shall not pay, for any portion of that cancelled cycle.

5.2.1.4.1 Late Cancellation Notice (Less than 72 Hours): If the Government cancels a scheduled training cycle with less than seventy-two (72) hours' notice prior to the start of the scheduled Preparation Day, the Contractor shall be authorized to invoice the Government strictly at the established contract daily rate for the authorized Preparation

Days (up to 2 days maximum). No active meal serving days (D/In) or replenishment days (Replenish) shall be billed or paid for cancelled cycles.

5.2.1.5 Service Day Fluctuations, Contract Modifications, and Established Daily Rates:

5.2.1.5.1 Adjustments to Quantities: The number of active feeding days (D/In), preparation days (Prep), and replenishment days (Replenish) listed in the annual training calendar (Attachment D) represents the Government’s best estimate of requirements. The Government reserves the right to increase or decrease the number of operational days, adjust course iteration dates, or add/remove training cycles to meet mission requirements.

5.2.1.5.2 Utilization of Established Day Rates: Any such increase or decrease in operational days shall be executed via a formal, written contract modification (Standard Form 30) issued by the Contracting Officer. All modifications to adjust quantities of service days shall be priced strictly using the purchase order Established Daily Rates set forth by the Contractor in the CLIN Pricing Schedule (Attachment 4).

5.2.1.5.3 No Equitable Adjustments for Volume Changes: Because day rates are established at the time of award, the Contractor shall not be entitled to an equitable adjustment, revised overhead rates, or renegotiated unit prices due to a decrease or increase in the total number of service days ordered, provided the changes are executed in accordance with this section.

5.2.1.6 Documentation and Audit Verification:

5.2.1.6.1 COR Notification & Record of Event: All late reductions or cancellations will be issued to the Contractor in writing by the Contracting Officer’s Representative (COR) via official email or written memorandum.

5.2.1.6.2 Digital Headcount & Cancellation Audit Log: The COR will document the event in the official Government COR Digital Headcount & Cancellation Audit Log, detailing the timestamp of cancellation, affected meal windows, original confirmed headcounts, and adjusted numbers.

5.2.1.6.3 Contractor Substantiation: To receive payment under this provision, the Contractor shall submit a written reconciliation report to the COR within three (3) business days of the cancellation event, detailing the impacted labor shifts and non-recoverable preparation efforts. Invoices containing late-cancellation compensation shall reference the specific COR-approved entry in the Digital Headcount & Cancellation Audit Log. Unsubstantiated claims will not be approved for payment.

5.2.1.7 Emergency Headcount Increases (Within 72 Hours): If a supported unit requests a headcount increase within 72 hours of execution, the Contractor shall make every reasonable effort to accommodate the additional personnel utilizing existing, on-site GFM inventory and available labor.

5.2.1.7.1 Emergency GFM Ordering: To support the increased headcount, the Contractor shall immediately calculate the additional subsistence required (incorporating the 10% preparation buffer) and submit an emergency GFM procurement request to the COR. The Government shall make every effort to expedite the procurement and delivery of the additional GFM to the DFAC. The Contractor shall not be held responsible for food shortfalls if the Government is unable to procure and deliver the emergency GFM prior to the scheduled meal.

5.2.1.7.2 Performance and Labor Protections: The Government acknowledges that last-minute additions are constrained by physical food delivery times and culinary preparation constraints (e.g., defrosting, marinating, and cooking times). The Government shall not penalize the Contractor for service shortfalls resulting from headcount increases requested within the 72-hour window that exceed the authorized 10% preparation buffer. Any additional Contractor labor hours required to support late headcount increases must be pre-authorized in writing by the KO or COR prior to execution.

5.2.2 Receipt and Quality/Temperature Inspection: Upon delivery of Government-purchased raw subsistence by the Prime Vendor or Government personnel, the Contractor shall physically inspect, count, weigh, and verify the internal temperatures of all chilled (≤ 41°F) and frozen (≤ 0°F) items in accordance with TB MED 530. The Contractor shall immediately notify the COR of any damaged, spoiled, out-of-temperature, or short-shipped items prior to accepting delivery.

5.2.3 Storage and Inventory Control: All raw subsistence shall be stored off the floor on dunnage racks or shelving within thirty (30) minutes of receipt, organized using First-In, First-Out (FIFO) stock rotation, and clearly labeled with receipt/expiration dates.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .