SOW_Trailer_Refinish.pdf

Statement of Work

Box Trailer and Drop Deck Trailer Refinish

1. All characteristics below state desired job requirements. The vendor will be responsible to determine what additional supplies will be necessary to deliver fully repainted trailers, one with a rebuild wood cargo surface. This includes mounting bolts, tape, and any other item that may be necessary but is not specifically mentioned. Offers will be evaluated for completeness and quality.

2. Minimum Requirement are listed below:

• Trailer #1: Box trailer refinish – Miller Trailer Inc., Model V1301 o Remove any lamps, mudflaps, fixtures, DOT tape, hardware, etc o Mask for overspray o Strip and prep entire trailer for sandblasting o Paint all metal surfaces of box and trailer frame in color similar to Ford True

Blue o Paint axle surfaces and landing gear assembly in black paint o Replace red/white reflective DOT tape strips in accordance with Federal and

Wisconsin regulations.

o Replace any lamps, mudflaps, fixtures, DOT tape, hardware, etc

• Trailer #2: Drop deck trailer refinish – Kalyn/Siebert, Model LP-20T o Remove any lamps, mudflaps, fixtures, DOT tape, hardware, etc o Mask for overspray o Strip and prep entire trailer for sandblasting o Paint all metal surfaces of trailer in color similar to Ford True Blue o Paint axle surfaces and landing gear assembly in black paint o Replace wood decking and floor bolts, with treated lumber and new bolts

Total area of wood decking approximately 81.5 inches x 457 inches x 2- 5/16 inches thick o Replace red/white reflective DOT tape strips in accordance with Federal and Wisconsin regulations.

o Replace any lamps, mudflaps, fixtures, DOT tape, hardware, etc

• Dispose of any waste and hazardous waste

• Requestor is able to drop off/pick-up of trailers within 100 mile radius from Zip 53704.