RFQ Spec Forklift 5000lb ELMO.docx

DOCX document 24 KB Posted

Attached to
LMO Forklift Purchase
Solicitation number
W912HZ27S2281
Issued by

About this file

This is a Request for Quote (RFQ) for the purchase of a brand-new forklift equipment from the Engineer Research and Development Center (ERDC) Directorate of Public Works. The ERDC is soliciting quotes for one (1) Toyota 5,000 lb. forklift or equal product, with delivery and offloading required to ERDC Logistics Management Office at 3909 Halls Ferry Road, Vicksburg, MS 39180 within 90 calendar days of contract award. The solicitation number is W912HZ27S2281, and all quotes must remain valid for 60 days from submission unless otherwise stated.

The forklift must be a 2026 or newer model year with USA country of origin, featuring an Industrial Internal Combustion (IC) counterbalance cushion tire design powered by Liquefied Petroleum Gas (LPG) or dual fuel (gas/LP). Minimum specifications include a 51 HP net industrial 4-cylinder engine with EPA/CARB-compliant exhaust, powershift automatic transmission, 3-stage full free-lift mast with 187-inch maximum height, solid smooth cushion tires, 80-inch maximum turning radius, minimum 10.0 mph loaded travel speed, 115 ft/min lift speed, Class II carriage with 48-inch load backrest and 42-inch adjustable forks, 2,200 psi hydraulic system, automated active stability control, operator presence sensing system, multi-function digital instrument cluster, LED headlights, reverse backup alarm, and hydraulic service brakes. The equipment must include a five-year manufacturer commercial warranty with delivery and offloading costs included in the quoted price. Vendors offering equal products must submit the latest published specifications and advertising literature, clearly identifying the manufacturer, brand, and model number, along with descriptive materials demonstrating compliance with all salient specifications.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Engineer Research and Development Center (ERDC) Directorate of Public Works (DPW) Specification for Brand New Toyota 5,000 lb. Forklift or Equal 2026 or newer model year

REQUIRMENT:

The ERDC is seeking quotes for brand-new equipment to match the following. The minimum specifications are listed below.

Deliver and offload to ERDC Logistics Management Office, 3909 Halls Ferry Road, Vicksburg, MS 39180 within 90 Calander days of Contract award. The vendor shall submit with their quote, the latest published specifications and advertising literature. Equipment shall maintain a five year manufacturer warranty. Delivery and offload shall be included in the quoted price. All quotes are good for 60 days unless otherwise stated.

Technical and delivery POC:

Line
SUPPLIES/SERVICES
QUANTITY
Unit
UNIT PRICE
AMOUNT
0001
Brand-New Toyota 5000 lb. Forklift (or equal)
1
each

TOTAL

The Equipment must meet the following specifications at a minimum:

· Country of Origin: USA

· Equipment Type: Industrial Internal Combustion (IC) Counterbalance Cushion Tire Forklift

· Model Year: 2026 or newer

· Rated Load Capacity: Minimum 5,000 lbs. rated at 24-inch load center

· Fuel / Power System: Liquefied Petroleum Gas (LPG) powered (UL-LP approved) or Dual Fuel (Gas/LP) with standard LP tank bracket and regulator

· Engine Performance: Industrial 4-cylinder engine delivering minimum 51 HP net with 3-way catalytic muffler/exhaust system compliant with EPA/CARB standards

· Transmission: Powershift automatic transmission with integrated fluid oil cooler

· Mast Assembly: 3-Stage Full Free-Lift (FSV) Mast; minimum 187-inch (15.5 ft) maximum fork height

· Mast Lowered/Extended Height: Maximum lowered mast height of 84.0 inches; extended height with load backrest of approximately 237 inches

· Free Lift: Minimum 35.0 inches free lift with standard load backrest installed

· Tires: Solid smooth cushion tires (2 front / 2 rear; front nominal, rear nominal)

· Maneuverability / Turning Radius: Outside turning radius not to exceed 80.0 inches; wheelbase maximum 59.0 inches

· Travel & Lift Speeds: Minimum loaded forward/reverse travel speed of 10.0 mph; minimum loaded lift speed of 115 ft/min

· Forks & Carriage: Class II ITA carriage with 48-inch load backrest and minimum 42-inch pallet forks (spread adjustable up to 36 inches minimum)

· Hydraulic System: Minimum 2,200 psi operating pressure with cowl-mounted hydraulic levers and auxiliary valve function

· Active Stability & Safety System: Automated active stability control system featuring active mast tilt control and automatic rear axle swing lock

· Operator Presence Sensing: Operator Presence Sensing System (OPSS or equivalent) disengaging drive and hydraulic lift/tilt functions when the operator departs the seat

· Instrumentation & Monitoring: Multi-function digital/LCD instrument cluster with hour meter, engine coolant temperature gauge, engine oil pressure warning, check engine indicator, and parking brake alert

· Safety Lighting & Alarms: Front LED headlights, key-activated horn, and audible reverse backup alarm

· Braking System: Hydraulic service foot brakes with independent foot-activated mechanical parking brake

· Warranty: Five Year manufacturer commercial warranty included

*BRAND NAME OR EQUAL

The vendor shall submit with their quote, the latest published specifications and advertising literature on the machine they propose to furnish. If quoting equal product, please provide below information:

Manufacturer’s Name: ______________________, Brand: __________________________

Model or Part Number: _______________________

To be considered for award in accordance with FAR 52.211-6, Brand Name or Equal, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(a) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(b) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation

File details come from the government source that posted it. Updated .