Questions and Answers Document 30 Aug 2022.pdf

The following questions and answers are provided for informational purposes only:

Question 1: Can we set up a call with the end user to find out why this information has not been provided?

Answer: This is a competitive solicitation; therefore, all communications must be made with the Contracting Officer. The Contracting Officer will ensure technical input is obtained to answer any questions relevant to this requirement.

Question 2: We need the CAD files formatted as a STEP file in millimeters for both drawings.

Answer: Yes, the CAD files are formatted as STEP files and are available upon request as stated in the solicitation.

Question 3: Were you able to confirm that they know of a printer that can print 5ft X 5Ft X 5Ft?

Answer: Yes.

Question 4: Can you ask the end user the name of the machine that was used to make these large parts?

Answer: This information is not needed for a quote to be submitted in accordance with the solicitation.

Question 5: What printers do you have onsite internally Names / Model Numbers?

Answer: This information is not needed for a quote to be submitted in accordance with the solicitation.

Question 5: We need to understand the types of equipment in use at the base today to align it with the equipment we may use to manufacture the part. Our understanding of your current technology will help us determine which systems we may have that match yours.

We formally request this information in order to provide a proposal.

Answer: This information is not needed for a quote to be submitted in accordance with the solicitation.

Question 6: Are EOS / SLM / TRUMPH / SCIAKY / Concept Laser / Renishaw ETC.

Metal 3D Printers in use at your lab to make 3d printed metal parts.

Answer: This information is not needed for a quote to be submitted in accordance with the solicitation.

Question 7: What Post Processing requirements are required for each part you have submitted ( As Built / Bead Blast / Dye Penetrant Testing / Heat Treatment / Stress Relief Etc ( These are not called out on any of the drawings submitted )?

Answer: As-built condition is acceptable for the example components as long as they meet the geometrical and mechanical performance specifications listed for 316L stainless steel and the drawings supplied. Any heat treatments or stress reliefs required will be at the discretion of the contractor to ensure the mentioned mechanical properties or geometrical tolerances are met.

Question 8: What Printer has been used in the past to manufacture 5X5X5 Foot Parts at your facility?

Answer: This information is not needed for a quote to be submitted in accordance with the solicitation.

Question 10: Is there a specific metal powder manufacturer that you prefer for your 3D Printed Metal Parts?

Answer: No specific metal powder manufacture is required as long as the final part meets the specifications for the material required in the solicitation.