PWS.pdf

Vibracore Boat Description

BOAT

Boat length: minimum 26’ Bottom width: minimum 82” Beam width: minimum 102” Transom height: minimum 32” Bow gate: minimum 32” electric winch Bow gate lip: U channel or indent to place ramps Modified V hull or appropriate hull Dual front anchors on electric winches with at least 80’ spectra rope 30” wide center mounted steering console with T top including mirror and lockable overhead storage Longitudinal floor stringers: 12” centers Transverse cross members: 15” centers Metal type: marine grade aluminum 0.250” thickness on hull, .190” sidewalls Interior side walls will be smooth with no ribbing All components will be welded together; no rivets on any critical boat component Side walls: minimum 34” side walls Gunwale cap: 3.5” x 3” extruded rectangular Exterior side spray rail: 2” x 3” welded and it needs to run the boat length Floor: 4” false floor with thick tread plate; foam filled Bow deck safety railing on port and starboard sides: round tubing that rises, at minimum 3’, not to exceed the height of the console window.

Self-bailing deck if possible Full width rear sump area 15” depth 30” width stern bench seat with back rest and a dry storage compartment underneath that is lockable Two U channel slots located 3’ in front of console that allows a 2” x 12” board that can be removable The bench seat will need to be lifted at least 2” to allow debris to freely pass underneath it Mooring cleats on the four interior boat corners, welded with support plate 2- 3” stern drain plugs Windshield tubular grab frame rail Two 3’ stern floatation boxes located at rear of boat; foam filled- if not self-bailing Dual 20-gallon minimum gas tanks Master electrical shut off switch Removable running lights All electrical will need to be on isolated systems 12-volt outlet located on drivers’ console Dual marine batteries Fire extinguisher underneath rear seat Dual 1,500 gallon per hour bilge pumps Removable caging around bilge pumps Marine wash down pump with hose (1 nozzle in aft, 1 nozzle in bow) Tied down cleats spaced every 4’ on boat to accommodate drill rod storage Bumper guard around engine Separate engine for hydraulics

TRAILER

Aluminum slide on trailer with dual 6,000-pound axles (minimum 1 brake axle) Trailer HDPE runners and HDPE side rails Two trailer spare tires LED brake lights on trailer Steps to access boat Heavy duty bearings

VIBRACORE Unit Windless winch- single gear box ¾ hp 12 volt with 1 cat head on starboard with swivel boom Rear spool winch 2,400-pound lift capacity, spectra rope 160’ 18’ A-frame, extendable or able to fold back to rest on top of t cabin, must be highway legal A-frame must be bolt on and removable Hydraulic system to lift A-frame 20kw generator on dampening mount with single phase 240v

ENGINE & ELECTRONICS

Installation of dual 150 horsepower engines including all gauges, hydraulic steering, switches, and control cables installed VHF radio with antenna 6” square mounts on top of T top for radar/ optional GPS antenna mount All winches must be controlled from captain position or mounted on a swivel base that captain can move

OPTION:

Hydraulic lift plates on engines.

GPS

Installation of GPS system including: Receiver, sonar, thru hull transducer(s), and NMEA 2000 network backbone, screen size minimum 12”

OPTION:

Bathymetric mapping capability with navigation system.

All components not listed to make boat fully functional prior to delivery (fire extinguishers, safety lights, safety chains, Fire suppressant system etc.)

1- year warranty

Shipping included in pricing.

Shipping to Vicksburg, MS c/o Jay Lindsay

CEERD-EEA

3909 Halls Ferry Rd Vicksburg, MS 39180