W912HV-16-B-0004_am-0001.pdf

NSN 7540-01-152-8070 STANDARD FORM 30 (REV.10-83)

PREVIOUS EDITION UNUSUABLE Prescribed y GSA

30-105 FAR (48CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

PAGE OF PAGES

1 l 2

2. AMENDMENT/MODIFICATION NO.

3. EFFECTIVE DATE

21 July 2016

4. REQUISITION/PURCHASE REQ. NO.

N/A

5. PROJECT NO. (if applicable)

6. ISSUED BY CODE

U.S.ARMY ENGINEER DISTRICT, JAPAN

ATTN: CONTRACTING DIVISION

BLDG. 250, ROOM 147, CAMP ZAMA

ZAMA-SHI, KANAGAWA-KEN 252-8511

JAPAN

W912HV 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

W912HV-16-B-0004

X 9B. DATED (SEE ITEM 11)

20 July 2016

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE Oeed9 FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning one (1) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDG- MENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

MILITARY WORKING DOG FACILITIES, CAMP HANSEN, OKINAWA, JAPAN

1. This is Amendment No. 0001 to Solicitation No. W912HV-16-B-0004; 20 July 2016.

2. The purpose of this amendment is to revise specification pages (see page 2)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

16. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED

16B. UNITED STATES OF AMERICA

BY

(Signature of Contracting Officer)

16C. DATE SIGNED

Am-0001

14. DESCRIPTION OF AMENDMENT (continued)

A. CHANGES TO SPECIFICATIONS – The amendment mark “(Am-0001)” is shown on each page of the amended specification section(s).

1) Revised Page(s) to Project Specifications. Attached hereto are the following revised page(s) to specifications. Revised page(s) will replace like-numbered page(s) in the subject specifications. On the revised pages, for convenience, changes are emphasized by STRIKETHROUGH for deletions and UNDERLINE for additions from the previous issue. All portions of the revised (or new) pages shall apply whether or not changes have been indicated.

Section Page No(s). Title 01 42 01-A (entire attachment) Listing of Acceptable Alternative Japanese

Standards

Acceptable Alternative Japanese Standards

01 42 01 –A1

Section Section Title/Material Description US Standard Japanese Standard 03 20 00.00 10 Concrete Reinforcement Welded Wire Fabric ASTM A 1064/A

1064M

JIS G 3551

Reinforcing Steel ASTM A 615 JIS G 3112 SD295A (D16 & Less)

Reinforcing Steel ASTM A 615 JIS G 3112 SD345 (D19 & Larger)

03 30 00.00 10 Cast-In-Place Concrete Chemical Admixtures for Use in

Producing Flowing Concrete

ASTM C1017/C1017M JIS A 6204

Test Method for Potential Alkali Reactivity of Aggregates

ASTM C1260 JIS A 1146

Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C136 JIS A 1102

Test Method for Slump of Hydraulic-Cement Concrete

ASTM C143/C143M JIS A 1101

Portland Cement ASTM C150 JIS R 5210 Practice for Sampling Freshly

Mixed Concrete

ASTM C172/C172M JIS A 1115

Practice for Making and Curing Concrete Test Specimens

ASTM C192/C192M JIS A 1132

Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

ASTM C231/C231M JIS A 1128

Practice for Making and Curing Concrete Test Specimens in the Field

ASTM C31/C31M JIS A 1132

Test Meth. for Comp. Strength of Cyld. Conc. Spec.

ASTM C 39/C 39 M JIS A 1108

Chemical Admixtures for Concrete ASTM C494/C494M JIS A 6204 Cellular Glass Thermal Insulation ASTM C552 JIS A 9521 Rigid, Cellular Polystyrene Thermal

Insulation

ASTM C578 JIS A 9521

Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

ASTM C591 JIS A 9521

Fly ash for use in concrete ASTM C618 JIS A 6201 Portland pozzolan cement ASTM C618 JIS R 5212 Test Method for Flexural Strength of Concrete

ASTM C78/C78M JIS A 1106

Ready Mix Concrete ASTM C 94 JIS A 5308

01 42 01 –A2

03 30 00.00 10 (Con.)

Cast-In-Place Concrete

Slag Aggregate for Concrete ASTM C 989 JIS A 5011 Concrete Aggregates ASTM C 33 JIS A 5005 Air-Entrained Admixture for

Concrete

ASTM C 260 JIS A 6204

Practice for Sampling Aggregates ASTM D75/D75M JIS A 1126 Test Methods for Water Vapor

Transmission of Materials

ASTM E96/E96M JIS A 9511

03 30 53 Miscellaneous Cast-In-Place

Concrete

Slag Aggregate for Concrete ASTM C 989 JIS A 5011 Portland Cement ASTM C 150 JIS R 5210 Ready Mix Concrete ASTM C 94 JIS A 5308 Steel Bars for Concrete

Reinforcement

ASTM A 615/A 615M JIS G 3112

Welded Wire Fabric ASTM A 185 JIS G 3551 Concrete Aggregates ASTM C 33 JIS A 5005 Air-Entrained Admixture for

Concrete

ASTM C 260 JIS A 6204

Polyethylene Sheet ASTM C 171 JIS K 6781 Test Method for Slump of

Hydraulic-Cement

ASTM C 143/C 143 M JIS A 1101

Practice for Sampling Fresh Concrete

ASTM C 172 JIS A 1115

Test Method for Air Content by Volume

ASTM C 173/ C 173 M JIS A 1118

Test Method for Air Content by Pressure Method

ASTM C 231 JIS A 1128

Practice for Making and Curing Concrete Test Spec

ASTM C 31/C 31 M JIS A 1132

Test Meth. for Comp. Strength of Cyld. Conc. Spec.

ASTM C 39/C 39 M JIS A 1108

04 20 00 Unit Masonry Concrete Blocks ASTM C 90 JIS A 5406 Bricks ASTM C 62 JIS R 1250

01 42 01 –A3

05 12 00 Structural Steel Rolled Steel for General Structure ASTM A 36/A 36M JIS G 3101 Rolled Steel for Welded Structure ASTM A 36/A 36M JIS G 3106 Hot Rolled Atmospheric Corrosion

Resisting Steel for Welded Structure

ASTM A 36/A 36M JIS G 3114

Rolled Steel for Building Structure ASTM A 36/A 36M JIS G 3136 Rolled Bars for Building Structure ASTM A 6/A 6M JIS G 3138 Light Gage Steel for General

Structure

ASTM C 955 JIS G 3350

Welded Light Gage H Steel for General

JIS G 3353

Carbon Steel Tubes for General Structural

ASTM A 500 JIS G 3444

Carbon Steel Square Pipes for General

ASTM A 53 JIS G 3466

Bolts ASTM A 307 JIS B 1180 High-Strength Bolts ASTM A 325 JIS B 1186 Washer ASTM F 436 JIS B 1256

05 52 00 Metal Railings Bolts ASTM A 307 JIS B 1180 Carbon Steel Tubes for General

Structure

ASTM A500/A500M JIS G 3444

Carbon Steel Square Pipes for General Structure

ASTM A53/A53M JIS G 3466

06 10 00 Rough Carpentry Structural Plywood APA PS2 JAS No. 516 Plywood for Concrete Form APA PS1 JAS No. 932 Softwood Structural Lumber JAS No. 1627 Laminated Wood ANSI/AITC A190.1 JAS No. 111 Structural Laminated Wood ANSI/AITC A190.1 JAS No. 112 Softwood Finish Lumber ALSC PS20 JAS No. 1084 Softwood Sheathing JAS No. 1085 Hardwood Lumber AHA A135.4 JAS No. 1086

06 20 00 Finish Carpentry Cabinets Kitchen Base Cabinet KCMA A161.1 Vanity KCMA A161.1 Kitchen Wall Cabinets Cabinet KCMA A161.1

01 42 01 –A4

06 41 16.00 10 Plastic-Laminate-Clad Architectural Cabinets

Countertops ANSI A161.2

06 61 16 Solid Surfacing Fabrications High-pressure Decorative

Laminate

ANSI/NEMA LD 3 JIS A 6514

Countertops ANSI/NEMA LD 3 JIS A 6514

07 21 16 Mineral Fiber Blanket Insulation

ASTM C 612 JIS A 9504

07 41 13 Metal Roof Panels Non-Structural Metal Roofing ASTM A 755/A 755M JIS A6514 Formed Japanese Metal Roofing ASTM A 792/A 792M Horizontal Metal Roofing Sheets

07 61 14.00 20 Steel Standing Seam Roofing Formed Japanese Metal Roofing ASTM A 755/A 755M JIS A6514

ASTM A 792/A 792M

08 11 16 Aluminum Doors and Frames ASTM A 36/A 36M, B

209M

JIS A4702, A4704,

A4705

ASTM B 221M, E 283,

E 331

JIS A4706, A4709,

A4713

JIS A4715, A6512

09 22 00 Supports for Plaster and Gypsum

Board

Nonstructural Steel Framing Members

ASTM C 645 JIS A 6517

09 29 00 Gypsum Board Gypsum Board ASTM C 1396/C

1396M

JIS A 6901

09 30 10 Ceramic, Quarry, and Glass Tiling Ceramic Tile ANSI A137.1 JIS A 5209

09 51 00 Acoustical Ceilings Acoustical Ceiling ASTM E 1264 JIS A 6301 Metal Ceiling Suspension System ASTM C 645 JIS A 6517

01 42 01 –A5

09 65 00 Resilient Flooring Resilient (Vinyl Composition Floor

Tile)

ASTM F 1066 JIS A 5705

09 90 00 Paints and Coatings Anti Rust Paint MPI 101, MPI 107, MPI 79

JIS K5621, JASS 18 M-

EP - Exterior Latex, Semi-Gloss, MPI Gloss Level 5

MPI 11 JIS K 5663

SOP - Interior Latex, Semi-Gloss, MPI Gloss Level 5

MPI 54 JIS K 5516

OS - Interior Oil Modified Urethane Clear Satin

MPI 57 JASS 18 Paragraph

5.9, JIS K5421

NAD - Interior Alkyd, Semi-Gloss, MPI Gloss Level 5

MPI 47 JIS K5516

VP - Interior Latex, Semi-Gloss, MPI Gloss Level 5

MPI 54 JIS K 5670

10 28 13 Toilet Accessories Mirrors ASTM C 1036 JIS R 3220

12 32 00 Manufactured Wood Casework Cabinets Kitchen Base Cabinet KCMA A161.1

Vanity KCMA A161.1

Kitchen Wall Cabinets Cabinet KCMA A161.1

21 13 13.00 10 Wet Pipe Sprinkler System, Fire

Protection

Steel Pipe Black ASTM A53/ A53M JIS G 3452 / JIS 3454 Malleable Iron Threaded Fittings ASME B16.3 JIS B 2301 Steel Buttwelding Fittings ASME B16.9 JIS B 2311

22 00 00 Plumbing, General Purpose Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

ASTM A 53/A 53M,

Sch 40

JIS G 3452/JIS G

3454/JIS B 2301

Valves, Cast Iron MSS SP-70 JIS B 2031 Water Closet ASME A112.19.2M

01 42 01 –A6

22 00 00 (con.) Plumbing, General Purpose Countertop Lavatories ASME A112.19.2M Kitchen Sinks ASME A112.19.3M Bathtubs, Porcelain ASME A112.19.4M Floor and Shower Drains ASME A112.6.3 JIS A 4002 Cast Iron Pipe and Fittings, Hub and Spigot

ASTM A 74 JIS G 5525

Cast Iron Pipe and Fittings, Hubless

CISPI 301/ASTM A

JIS G 5525

Steel Pipe, Galvanized ASTM A 53 / A 53M JIS G 3452/JIS G

3454/JIS B 2301

Copper Pipe, Seamless ASTM B 42 JIS H 3300/JIS H 3401 Poly(Vinyl Chloride) (PVC) Plastic

Drain, Waste, and Vent Pipe and Fittings

ASTM D 2665 JIS K 6739/JIS K 6741

Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core

ASTM F 891 JIS K 6739/JIS K 6741

Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

ASTM F 1760 JIS K 6739/JIS K 6741

23 00 00 Air Supply, Distribution, Ventilation, and Exhaust Systems

Ceiling Exhaust Fan UL listed Duct, Galvanized Steel Sheet ASTM A 653/A 653M JIS G 3302

23 07 00 Thermal Insulation for

Mechanical Systems

Aluminum and Aluminum-Alloy Sheet and Plate

ASTM B 209M JIS H 4000

Pipe Insulation, Mineral Fiber ASTM C 547 JIS A 9504 Duct Insulation, Mineral Fiber ASTM C 553 JIS A 9504

23 64 26 Chilled, Chilled-Hot, and

Condenser Water Piping Systems

Steel Pipe, Black ASTM A 53/A 53M, Sch 40

JIS G 3452/JIS G

3454/JIS B 2301

Copper Tubing ASTM B 88M, Type M JIS H 3300 Copper and Bronze Fittings ASME B16.22 JIS H 3300/JIS H 3401 Bronze Gate, Globe, Angle and

Check Valves

MSS SP-80 JIS B 2011

01 42 01 –A7

23 64 26 Chilled, Chilled-Hot, and Condenser Water Piping Systems

Ball Valve MSS SP-72/ MSS SP-

Pressure Relief Valve ANSI Z21.22

23 82 02.00 10 Unitary Heating and Cooling

Equipment

Fan Coil Units AHRI 440

23 82 19 Fan Coil Units Fan Coil Units AHRI 440

26 20 00 Interior Distribution System Interior Distribution System

Connector

UL 651A JIS C 8433

Elbows UL 651A JIS C 8434 Electrical Nonmetallic tubing UL 1653 JIS C 8411 class PF Outlet boxes Metallic UL 514A JIS C 8336 Outlet boxes Non-metallic UL 514C JIS C 8435 Cast metal hub type boxes UL 514A JIS C 8340

Bonding conductors, bare copper, solid, ATSM B1 JIS C 3101

Bonding conductors, bare copper ATSM B8 JIS C 3105, class 1, general use

600V Insulated wire, 60 degree C UL 83 JIS C 3307 600V Insulated wire, 75 degree C UL 44 JIS C 3317 600V Insulated wire, 90 degree C UL 44 JIS C 3317

EMT conduit UL 797 JIS C 8305, type E Couplings UL 514B JIS C 8330 Elbows UL 6 JIS C 8330 Type EB & A rigid PVC & HDPE conduit UL 651A, NEMA TC 6 JIS C 8430 - increase burial depth to same as direct buried

Couplings UL 651 JIS C 8432 Connectors UL 651 JIS C 8433 Elbows UL 651 JIS C 8434 Electrical Nonmetallic tubing UL 1653 JIS C 8411 class PF

01 42 01 –A8

28 31 64.00 10 Fire Detection and Alarm System Metal Conduit UL6 JIS C 8305

31 00 00 Earthwork Fine Aggregates ASTM C 33 JIS A 5308 Concrete Aggregates ASTM C 33 JIS A 5005

32 10 00 (Pervious) Bituminous Concrete

Pavement

Asphaltic Concrete Cement Binder ASTM D 946 JIS K 2207

32 11 23 Aggregate and/or Graded-

Crushed Aggregate Base Course

Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C136/C136M JIS A 1102

Test Method for Materials Finer than 75-um (No. 200) Sieve in Mineral Aggregates by Washing

ASTM C 117 JIS A 1103

Liquid Limit, Plastic Limit, and Plasticity Index of Soils

ASTM D 4318 JIS A 1205

Test Method for Density and Unit Weight of Soil in Place by Sand- Cone Method

ASTM D1556/D1556M JIS A 1210

Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3) (2700 kN-m/m3)

ASTM D 1557 JIS A 1210

32 11 24 Graded Crushed Aggregate Base

Course for (Pervious)(Flexible)

Crushed Stone for Road ASTM D 692 JIS A 5001

32 12 10 Bituminous Tack and Prime Coats Prime/Tack Coat ASTM D 977 JIS K 2208

32 12 17 Hot Mix Bituminous Pavement Coarse Aggregate for Bituminous

Paving Mixtures

ASTM D 692/D 692 M JIS A 5001

Fine Aggregate for Bituminous Paving Mixtures

ASTM D 1073 JIS A 5005

Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C136/C136M JIS A 1102

01 42 01 –A9

32 12 17 (Con.) Hot Mix Bituminous Pavement Test Method for Materials Finer than 75-um (No. 200) Sieve in Mineral Aggregates by Washing

ASTM C 117 JIS A 1103

Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)

ASTM D 70 JIS K 2249/K 2207

Test Method for Density, Relative

Density (Specific Gravity), and Absorption of Coarse Aggregate

ASTM C 127 JIS A 1110

Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

ASTM C 131 JIS A 1121

Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

ASTM C 88 JIS A 1112

Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

ASTM C 29/C 29M JIS A 1104

Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

ASTM C 128 JIS A 1109

Test Method for Density of Hydraulic Cement/Specific Gravity of Soil Solids by Water Pycnometer

ASTM C 188/D 854 JIS A 1202

32 17 24.00 10 Pavement Markings Paint, Traffic and Airfield

Markings, Waterborne

FS TT-P-1952 JIS K 5664

Beads (Glass Spheres) Retro- Reflective (Metric)

FS TT-B-1325, Type I, Gradation A

JIS R 3301, Class 1

Glass Beads Used in Pavement Markings

AASHTO M 247, Type I JIS R 3301, Class 1

33 11 00 Water Distribution Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

ASTM A53/A53M JIS G 3442

Carbon Structure Steel ASTM A 36/A 36M JIS G 3251

01 42 01 –A10

33 11 00 (con.) Water Distribution Ductile-Iron and Gray-Iron Fittings for Water

AWWA C110 JIS G 5526

Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges/Ductile-Iron Pipe, Centrifugally Cast, for Water

AWWA C 115/C 151 JIS G 5527

Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

ASTM D 1784 JIS K 6741/6742

Heat Fusion Joining Polyolefin Pipe and Fittings

ASTM D 2657 JIS K 6742/6739

Poly(Vinyl Chloride) (PVC), Plastic Pipe, Schedules 40, 80, and 120

ASTM D 1785 JIS K 6743

Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In.

Through 12 In. (100 mm Through 300 mm), for Water Distribution

AWWA C 900

Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13mm) Through 3 In. (76 mm), or Water Service

AWWA C 901 JIS K 6762

Polyethylene pipe Fitting AWWA C 902 JIS K 6763 Reinforced Concrete Pressure

Pipe, Steel-Cylinder Type

AWWA B 300 JIS K 1207

Prestressed Concrete Pressure Pipe, Steel-Cylinder Type

AWWA B 301 JIS K 1102

33 30 00 Sanitary Sewers Cast Iron Soil Pipe and Fittings ASTM A 74 JIS G 5525 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

ASTM A 123/123 M JIS 3452/B 2301

Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

ASTM D 3212 JSWAS K-1

Valve JIS B 2031/2011 U-type RC ditch JIS A 5305 Manhole JIS A 5317 Concrete pipe JIS A 5303 Concrete Ditch for road JIS A 5345 Concrete Block/Crushed stone JIS A 5323/5006

01 42 01 –A11

33 30 00 (con.) Sanitary Sewers Polyethylene Encasement for DIP AWWA C 105 Concrete Aggregates ASTM C33/C33M JIS A 5005 Ready-Mixed Concrete ASTM C94/C94M JIS A 5308 Portland Cement ASTM C150/C150M JIS R 5210/5211 Air-Entertaining Admixture for

Concrete

ASTM C260/C260M JIS A 6204

33 34 00 Force Mains And Inverted

Siphons; Sewer

Steel Water Pipe - 6 In. (150 mm) and Larger

AWWA C 200 JIS G 3454

Stainless Steel JIS G 3459/3448 Rigid PVC pipe ASTM D 1784 JIS K 6741/6776 Steel pipe fitting JIS B 2312/2313 Rigid PVC Heat resistant fitting JIS K 6777 DIP fitting JIS B 2301/2302 Backflow preventor/Valve JIS B 2011/2031 Coal-Tar Protective Coatings and linings for AWWA C 203 for Steel pipelines

JWWA K 115

33 40 00 Storm Drainage Utilities Concrete Sewer, Storm Drain, and

Culvert Pipe

ASTM C 14 JIS A 5302 / 5303

Moist-Density Relation Test (American Assoc of State Highway Official)

AASHTO T-180 JIS A 1210

Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3) (2700 kN-m/m3)

ASTM D 1557 JIS A 1210

33 71 02 Underground Electrical

Distribution

Electric Conduit, Rigid Rigid Metal Conduit UL 6 JIS C 8305 type G Elbows & couplings UL 6 JIS C 8330 Conduit, Tubing and Cable

Fittings

UL 514B JIS C 8330

Conduit bodies, entrance caps UL 514B JIS C 8340 PVC coated rigid steel conduit NEMA RN 1 JIS C 8380

01 42 01 –A12

33 71 02 (Con.) Underground Electrical Distribution

PVC Conduit PVC conduit, schedule 40 & 80 rigid NEMA TC 2 & UL 651 JIS C 8430 - increase burial depth to same as direct buried

Couplings UL 651 JIS C 8432 Connectors UL 651 JIS C 8433 Elbows UL 651 JIS C 8434

Electric Cable NM 60 degree C UL 719 JIS C 3342 NM 75 degree C UL 719 JIS C 3605 type EV or

EE

NM-B 90 degree C UL 719 JIS C 3605 type CV or

CE

Service Entrance Cables USE UL 854 JIS C 3605 type CV Medium Voltage power cables

15000 V UL 1072 JIS C 3606 type CV or

CE

Miscellaneous Paving, AC, PC Structure etc.

Slump of Hydraulic cement concrete

ASTM C 143 JIS A 1101

Reinforcing Steel ASTM A 615 JIS G 3112 Welded wire Fabrics ASTM A 185 JIS G 3551 Polyethylene sheet ASTM C 171 JIS K 6781 Sampling Freshly Mixed Concrete ASTM C 172 JIS A 1115 Air Content Test ASTM C 173 JIS A 1118 Low Alloy Steel ASTM A 514 JIS G 3106 Tubing ASTM A 500 JIS G 3444 / 3446 /

Washers ASTM F 436 JIS B 1256 High-Strength Bolt ASTM A 325 JIS B 1186 Bolts ASTM A 307 JIS B 1180 Crushed Stone for Road ASTM D 692 JIS A 5001 Manufactured Sand for Road ASTM D 1073 JIS A 5004 Sieve Analysis of Aggregate ASTM C 136 JIS A 1102 Specific Gravity of Semi-Solid

Bituminous

ASTM D 70 JIS K 2249

ditto and Absorption of Coarse Aggregate

ASTM C 127 JIS K 1110

01 42 01 –A13

Miscellaneous Paving, AC, PC Structure etc.

(con.) Compaction of Backfill Materials ASTM D 1556 JIS A 1210 Channels, Angles, General

Structural steel

ASTM A 36 JIS G 3106 / 3101 /

3136 / 3138 Hot-rolled Atmospheric Corrosion

Resist steel

ASTM A 242 JIS G 3114

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT