Solicitation QandA-Coating Machine.docx

Coating Machine and Pump Questions & Answers

Any additional information, spec details or a part number for the requested sprayers?

The suggested part number is FP2110 or equal.

Please also confirm where the start-up and training would be located.

Sierra Army Depot 74 Currant Street Herlong, CA 96113

Nozzle? Are you referring to Gun if so what model. Or do we need to supply a gun as well

The suggested part numbers are 246100 round nozzle and 247111 flat nozzle or equal.

Do you have a compressor to push the transfer pumps? The compressor will have an airline into the schultz air dryer and a three way out to the two transfer pumps and one to the gun. Three electric heated hoses A,B, and Air

Yes

Q:1) Is the polyurea an aromatic or aliphatic material?

Aliphatic

Q:2) What is the PSI and heat requirement of the material you will use?

2000-250 PSI

Q:3) How many feet of hose do you need? Minimum is 50 + 10 = 60 ft. Different machines have different hose length limitations?

2 @ 50 ft. & 2 @ 20 ft.

Q:4) Which spray gun do you want - AP - P2 - CS - Pro-Connect? What mix chamber size do you want?

AP/ -00

Q:5) Do you want an electric or hydraulic machine?

Hydraulic

Q:6) May I please ask what size jobs you will be spraying?

Both small and large jobs (10 ft. X 10 ft. & 20 ft. X 60 ft.)

Q:7) Are you transferring material from drums or tote's?

Drums

Q:8) Will the equipment be stationary or mobile?

Stationary

Q:9) Feed hose's are a standard 10'. If you need more you will need to specify?

10 ft

Q:10) You do not mention a mixer yet the chemistry requires one.

Include the mixer in the machine.

Q:11) I need a complete address for Herlong, CA 96113 Sierra Army Depot 74 Currant Street Herlong, CA 96113

Q:12) Are you asking for a quote on chemicals as well?

No, please only quote what was specified in the Solicitation.

1) The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Each item needs to be marked with a serial number or some identification equivalent.

2) FFP - W62G2W

FFP stands for Firm Fixed Price W62G2W is the DODAAC for Sierra Army Depot

3) The machine must be compatible with LINE-X XS-S100 or Dragonhide 1000 chip and abrasion material (this also may be known as "bed lining" material.)

This is the type of material the machine quoted must be able to use.

How many days of training do you want?

Company should specify what training they suggest would be best for the equipment employees must be trained on. Please include the training in the price of the coating machine.

Q:3) How many feet of hose do you need? Minimum is 50 + 10 = 60 ft. Different machines have different hose length limitations?

2 @ 50 ft. & 2 @ 20 ft.

Hoses come in 50 ft lengths. So it is either 100ft plus the 10 ft whip or 150ft plus a 10ft whip. Please let me know what you want.

As long as the hoses come in a dual set up the following should suffice:

2 each 50 ft. hoses 2 each 10 ft. whip hoses