W912GY-17-T-0007.pdf

SEE ADDENDUM

(No Collect Calls)

W912GY-17-T-0007 21-Feb-2017

b. TELEPHONE NUMBER

530-827-4776

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 15 Mar 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912GY9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

LISSA KAARBO

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W62G2W6357007K

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

SIERRA ARMY DEPOT

CONTRACTING OFFICE

74 C STREET BUILDING 60

HERLONG CA 96113

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W62G2W 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

DIRECTORATE OF BASE SUPPORT

TOOL ROOM

SIERRA ARMY DEPOT

HERLONG CA 96113

TEL: 530-827-4573 FAX:

530-827-4722FAX:

TEL: 530-827-5146 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$20,500,000

NAICS:

811219

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF74

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912GY-17-T-0007

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1001 1 Lot Scale Calibration

FFP

Description: Base Year Calibrate Scale Equipment IAW the statement of work NTE 100 each. Period of performance is for 12 month service.

FOB: Destination

NSN: AASSVC6357007K

MILSTRIP: W62G2W6357007K

PURCHASE REQUEST NUMBER: W62G2W6357007K

NET AMT

1002 1 Lot OPTION Scale Calibration- Option Year 1

FFP

Description: Option Year 1 Calibrate Scale Equipment IAW the statement of work NTE 100 each. Period of performance is for 12 month service after expiration of Base year.

FOB: Destination

1003 1 Lot OPTION Scale Calibration- Option Year 2

FFP

Description: Option Year 2 Calibrate Scale Equipment IAW the statement of work NTE 100 each. Period of performance is for 12 month service after expiration of Option year 1.

1004 1 Lot OPTION Scale Calibration- Option Year 3

FFP

Description: Option Year 3 Calibrate Scale Equipment IAW the statement of work NTE 100 each. Period of performance is for 12 month service after expiration of Option year 2.

1005 1 Lot OPTION Scale Calibration- Option Year 4

FFP

Description: Option Year 4 Calibrate Scale Equipment IAW the statement of work NTE 100 each. Period of performance is for 12 month service after expiration of Option year 3.

2001 1 Lot Scale Repairs and Parts as Needed

FFP

Description: Base Year Scale Equipment parts and repair as needed IAW the statement of work. Bid will reflect the contractor's hourly rate. Period of performance is for 12 month service.

FOB: Destination

NSN: AASSVC6357007K

2002 1 Lot OPTION Scale Repairs and Parts- Option Year 1

FFP

Description: Option Year 1 Scale Equipment parts and repair as needed IAW the statement of work. Bid will reflect the contractor's hourly rate. Period of performance is for 12 month service after expiration of Base Year.

2003 1 Lot OPTION Scale Repairs and Parts- Option Year 2

FFP

Description: Option Year 2 Scale Equipment parts and repair as needed IAW the statement of work. Bid will reflect the contractor's hourly rate. Period of performance is for 12 month service after expiration of Option Year 1.

2004 1 Lot OPTION Scale Repairs and Parts- Option Year 3

FFP

Description: Option Year 3 Scale Equipment parts and repair as needed IAW the statement of work. Bid will reflect the contractor's hourly rate. Period of performance is for 12 month service after expiration of Option Year 2.

2005 1 Lot OPTION Scale Repairs and Parts- Option Year 4

FFP

Description: Option Year 4 Scale Equipment parts and repair as needed IAW the statement of work. Bid will reflect the contractor's hourly rate. Period of performance is for 12 month service after expiration of Option Year 3.

3001 1 Lot Convert Truck Scale

FFP

Description: Provide service and parts if applicable to truck scale from manual to electric operation per the statement of work para 1.3.10. To be performed and completed during base year of this contract.

FOB: Destination

NSN: AASSVC6357007K

4001 1 Each Contracting Manpower Report

FFP

Description: Contractor Manpower Reporting in accordance with Clause 52.237- 4000. The CMR is a government requirement for all service contracts that include labor. The contractor is required to login into the CMR website after completion of the contract and record labor hours worked in support of the contract. Typically requires approximately 1-2 hours of time. Contractor can include in bid a reasonable rate to comply or leave as "no charge".

FOB: Destination

NSN: AASSVC6357007K

4002 1 Each OPTION Contracting Manpower Report

FFP

Description: Contractor Manpower Reporting in accordance with Clause 52.237- 4000. The CMR is a government requirement for all service contracts that include labor. The contractor is required to login into the CMR website after completion of the contract and record labor hours worked in support of the contract. Typically requires approximately 1-2 hours of time. Contractor can include in bid a reasonable rate to comply or leave as "no charge".

4003 1 Each OPTION Contracting Manpower Report

FFP

Description: Contractor Manpower Reporting in accordance with Clause 52.237- 4000. The CMR is a government requirement for all service contracts that include labor. The contractor is required to login into the CMR website after completion of the contract and record labor hours worked in support of the contract. Typically requires approximately 1-2 hours of time. Contractor can include in bid a

4004 1 Each OPTION Contracting Manpower Report

FFP

Description: Contractor Manpower Reporting in accordance with Clause 52.237- 4000. The CMR is a government requirement for all service contracts that include labor. The contractor is required to login into the CMR website after completion of the contract and record labor hours worked in support of the contract. Typically requires approximately 1-2 hours of time. Contractor can include in bid a

4005 1 Each OPTION Contracting Manpower Report

FFP

Description: Contractor Manpower Reporting in accordance with Clause 52.237- 4000. The CMR is a government requirement for all service contracts that include labor. The contractor is required to login into the CMR website after completion of the contract and record labor hours worked in support of the contract. Typically requires approximately 1-2 hours of time. Contractor can include in bid a

5001 1 Each Contract Data Requirement List (CDRL)

FFP

Contract Data Requirement List A001: Contractor shall submit certificates for the Railroad scales upon completion of calibration between the timeframe 1 June to 1 August of each period of performance covered on this contract to SIAD Directorate of Public Works. For required information see PWS 1.3.8.

5002 1 Each Contract Data Requirement List (CDRL)

FFP

Contract Data Requirement List A002: Contractor shall submit certificates for (3) three each Truck Scales upon completion of calibration between the timeframe 1 May to 31 May of each period of performance covered on this contract to SIAD Directorate of Public Works. For required information see PWS 1.3.9.

PERFORMANCE STATEMENT OF WORK

PERFORMANCE STATEMENT OF WORK

Scale Calibration @ SIAD

1.0 PART I – GENERAL:

1.1 GENERAL: The contractor shall provide all labor, materials, equipment and supervision necessary to implement Scope of Work Items listed below at SIERRA ARMY DEPOT (SIAD), Herlong, CA. 96113

1.2 Minimum Requirements: All work shall be done within the manufacture’s specifications and in accordance with all Federal, State and local regulations. Work shall be done in a professional workman like manner and to industrial standards.

1.2.1 Location: Various locations on SIAD.

1.2.2 Refer to attached plan for details. Locations of work will be provided upon award.

1.3 Scope of Work Items: Contractor shall perform calibration and preventive maintenance Not to Exceed (NTE) (100) scales located at SIAD. Scales are identified on the attached Scale Calibration List.

Contractor shall coordinate 2 weeks in advance with the Technical Point of Contact to set the exact day they will be on SIAD to allow the Government time to have the scales available for calibration. Contractor shall calibrate all scales starting on 1 May and finish by 31 May of the contract year.

1.3.1 Preventive Maintenance: Shall include annual inspections, testing, calibration and test report documentation.

1.3.2 Labor: On-site maintenance support required to maintain equipment to specifications during coverage hours to be billed at current vendor rates. Coverage hours are 0630 – 1700, Monday thru Thursday.

1.3.3 Parts: All parts required to maintain the equipment to specifications. Excluding abuse and or neglect.

1.3.4 Travel Expenses: All travel expenses included. Travel outside of coverage hours to be billed at current vendor rates if prior authorization is given by government.

1.3.5 Product Enhancement: To include all applications software enhancements not requiring hardware changes.

1.3.6 Records Management: The Contractor shall provide the Government with a copy of all calibrations certificates. The Contractor shall also provide the Government with laboratory, laboratory equipment and personnel certificates showing that the Contractors personnel, laboratory and equipment are certified to do calibration.

1.3.7 Labels: The Government will provide the Contractor with U.S. Army calibration labels, DA80, (1” X 3.5”), that the Contractor will fill out and attach to each scale after calibration.

1.3.8 Railroad Scales: The Contractor will coordinate with and pay the State of California, Dept. of Weights & Measures – Lassen County to have 1 railroad scale certified after calibration. Date of calibration of this railroad scale will be set by the entity that controls the calibrated railroad car and will fall outside the 31 May yearly completion requirement date. Contract Data Requirement List (CDRL) A001 is required to be submitted between June 1st and August 1st of each period of performance on this contract.

1.3.9 Truck Scales: The Contractor will coordinate with and pay the State of California, Dept. of Weights & Measures, to have 3 truck scales certified after calibration. Contract Data Requirement List (CDRL) A002 is required to be submitted between May 1st and May 31st of each period of performance on this contract.

1.3.10 Convert Truck Scale: The Contractor shall convert (1) of the above mentioned truck scales from manual to electronic operation (Bldg xx). Convert manual truck scale by installing a mechanical-to-electronic conversion application. Contractor to determine and install:

(A) The appropriate capacity for the S-Beam load cell to convert the manual system.

(B) A programmable indicator, Rice Lake 820i programmable indicator/controller or equal.

(C) A 6inch remote display, Rice Lake Survivor laser light series remote display or equal. Contractor shall provide any equipment necessary to calibrate the scale once it is converted.

(D) Once the conversion is complete the Contractor shall test, calibrate then assist the above mentioned State authority with the scales certification.

1.4 Contractor will supply all labor and materials. Contractor shall commence work during the month of May each year and shall complete work within specified yearly 31 day period unless otherwise stated per this Contract.

1.5 Applicable Documents:

1.5.1 SIAD Regulation 420-7 (Fire Prevention and Protection)

1.5.2 COE regulation 385-1-1 (Safety) and CESPK PAM 415-1-2 Construction Control Manual, Sampling & Testing Construction Materials.

1.5.3 All local, state and federal laws, codes and regulations.

1.5.4 NEC Electrical Code

1.5.5 IBC Building Codes

1.5.6 UFC 3-600-01 & 4-010-01 Codes

1.5.7 NFPA Fire Codes

1.5.8 American National Standards Institute – Z540-1

1.6 Submittals:

1.6.1 Submittals required: The Contractor shall provide the Government with a copy of all calibration certificates. The Contractor shall also provide the Government with laboratory, laboratory equipment and personnel certificates showing the Contractors personnel, laboratory, and equipment are certified to do the calibration.

1.7 Pre-Commencement Meeting: Prior to the commencement of work, a meeting will be held with the Contractor and the Government Representatives to discuss matters of mutual interest concerning the contract. General conditions, work schedules and phasing, security, safety, depot siren, operations during lightning/thunderstorm, character of work, operations & storage areas, housekeeping and clean-up, days of work, equipment, fire prevention, smoking areas, accidents, local rules and regulations, delays, quality assurance, inspections, digging permits, hazardous waste, debris disposal and other matters pertinent to work accomplishments will be discussed at this time. At this time the Contractor shall submit their Safety and Quality assurance plans.

1.8 Point of Contact (POC): The Technical Point of Contact (TPOC) for this action will be Ms. Sandra Ray 530-827-4573. The Administrative Contracting Officers Representative (COR) shall be determined, who is responsible for verifying that services have been rendered.

1.9 Work Coordination: All work shall be coordinated with the TPOC.

1.10 Smoking Areas: Smoking will be permitted only at locations designated by the TPOC.

1.11 Safety:

1.11.1 Regulations: All installation safety regulations shall be followed.

1.11.2 Signage: Appropriate signs designated by Fire, Safety & Security shall be provided by the Contractor and placed as indicated in work areas.

1.11.3 Work Area Closures: The work areas shall be closed off to unauthorized personnel.

1.11.4 Accidents: All accidents shall be reported to the Safety Office through the TPOC. This is to be accomplished within the same shift, preferably as soon after the accident as is practical. An Occupational Safety and Health Administration (OSHA) Form 101 shall be submitted within three (3) working days after the accident. In the event of serious injury or damage, work will stop and everything will be left in place exactly as it was at the time of the accident, excepting when the possibility of more damage or injury exists.

1.12 Housekeeping and Cleanup: The Contractor shall at the end of each work day leave all work areas in a neat, clean and workmanlike condition satisfactory to the TPOC. After completion of the entire job, the Contractor shall remove from the premises all tools, equipment, and materials.

1.13 Unscheduled Interruptions: Work operations are subject to unscheduled interruptions and contractor personnel may be required to immediately leave the designated work area or be denied access due to security operations. Mission requirements may necessitate suspension or cancellation of custodial operations for that period. All incomplete work shall be rescheduled for completion at a later time/date mutually agreed upon by the COR, TPOC, QA personnel and Contractor (See 1.20 Delays).

1.14 Working Area Verification: The Contractor shall be responsible for the coordination and proper relationship of this work to the building premises, and thoroughly familiarize himself with all details of the Scope of Work and working conditions, to verify all dimensions in the field, and advise the TPOC/COR of any discrepancies before performing any work.

1.15 Quality Assurance: While performing this work the Contractor shall be subject to on-site inspections by the TPOC, COR and QA personnel. The Contractor shall provide a manager to conduct and oversee daily QA and safety issues if any work is found to be in violation of a specification requirement, the COR will issue a stop work order until the violation is resolved. Standby time and expenses require resolving the violation shall be at the contractor expense.

1.15.1 There shall be announced and unannounced spot checks.

1.15.2 QA visual observations may be performed by the TPOC, COR & QA personnel.

1.15.3 Evaluation of customer’s complaints and/or comments shall be reviewed jointly by the TPOC and

COR.

1.15.4 Communication with users (persons requesting the project) shall be done through the TPOC.

1.16 Debris:

1.16.1 Non-Hazardous Waste: All scrap, solid waste and non-hazardous materials shall be disposed off the Depot and in accordance with applicable laws and regulations at Contractor's expense, unless otherwise specified in the contract.

1.16.2 Hazardous Waste: Hazardous waste generated by Contractors on SIAD shall be disposed of in accordance with SIAD Policy. Contact the Environmental Office, 530-827-4235 or 4381, for proper disposal instructions. Government receptacles or containers shall not be used for disposal, unless previously arranged for by the TPOC. Contractor shall submit an abatement plan where and when applicable to the TPOC.

1.17 Delays: The Government is not liable for any delay caused by the occupant, security inspections at any entrance gates or any security measures imposed by the Installation Commander and/or higher authority.

1.18 Damages: The Contractor shall be responsible for repairing damage caused by construction and or repair activities. Any damages incurred as a result of Contractor’s actions shall be repaired or replaced at no additional cost to the Government.

1.19 Materials and Equipment Stored on Depot: The Government shall not assume any responsibility for the security or protection of any materials or equipment stored on SIAD by the Contractor.

1.20 Environmental Notification: Contractor shall comply with the following Environmental Sections.

Sec. 1- Compliance with Environmental Laws and Regulations:

Contractor shall comply with all applicable federal, state, and local environmental laws, statutes, regulations, executive orders, permits, Army regulations (with supplements), as well as Major Subordinate Command (MSC) and Sierra Army Depot (SIAD) regulation, policy, Host Tenant Agreement, Interagency Service Support Agreement, or Status-of-Forces Agreement. Contractor shall immediately report any conflicts between applicable federal, state, local environmental laws, statutes, executive orders, and provisions of Army Regulation 200-1, and any specifications within this contract to the Contracting Officer Representative (COR).

Sec. 2 - Compliance with Green Procurement Requirements:

Contractor shall follow Federal EPA Comprehensive Procurement guidelines (www.epa.gov/cpg) and Army Contracting Command Quick Guide (https://acc.aep.army.mil/accapps/ACCMAP/Documents/Quick- Guide-for-Sustainable-Procurement.docx) for acquisition of building materials and products and select materials that have a long life cycle; the least toxic materials; recyclable materials; materials that are resource-efficient; materials with the maximum recycled content; materials harvested on a sustained yield basis; and products causing the least pollution during their manufacture, use, and reuse.

Sec. 3 - Compliance with License and Certification Requirements:

Contractor shall obtain all license and certification required by Federal, State, and Local environmental laws and regulations necessary to adhere to the specifications of this contract. The Contractor shall submit all plans, notifications, reports, submittal documents, and fees required by Federal, State, and Local environmental laws and regulations to the appropriate Federal, State, and Local authority and/or agency as necessary to adhere to the specification of this contract. All required licenses and certifications required by Federal, State, and Local environmental laws and/or regulations shall be considered a contract deliverable upon award.

Sec. 4 - Notification of Federal and State Regulators:

Contractor shall immediately notify the Designated Government Representative (DGR) and COR of the arrival on site of any Federal, State, local and/or DoD environmental regulator or enforcement agent and/or the receipt of any correspondence from above mentioned environmental regulatory agencies.

Sec. 5 - Inspections of Work Sites:

Contractor shall submit to potential Federal, State, Local, Army and installation work site environmental regulatory inspections and/or investigations into noncompliance, and fully cooperate with such inspections/investigations by providing the appropriate records and documentation. Environmental regulatory agencies are authorized by law to inspect any work site for environmental compliance with regulatory requirements. If an inspection is conducted, it will not stop or disrupt ongoing contract activities. The inspection will only require the work site environmental officer, or supervisor/manager to answer questions and/or escort the inspector to specific work site areas with the potential to affect environmental quality.

Sec. 6 - Reporting Noncompliance:

Contractor shall immediately report any nonconformance and/or noncompliance with applicable Federal, State or Local environmental laws, Army and installation environmental regulations or policies to the COR and DGR.

Sec. 7 - Verification of National Environmental Policy Act Documents:

Contractor shall obtain and comply with AMC's National Environmental Policy Act Policy and 32 CFR 651 which addresses actions to be taken by contractor (copies available from the COR or DGR). These documents include but is not limited to the analysis-associated decision document of an Environmental Impact Statement and Record of Decision; Environmental Assessment and Finding of No Significant Impact or Notice to Proceed; or Record of Environmental Consideration on the proposed contract actions prior to commencement of such actions.

Sec. 8 - Conformance with Environmental Management System (EMS):

Contractor shall take the necessary actions to identify, monitor, and control those contract operations and activities that pose risk of contamination, or can negatively impact the natural and/or human environment.

SIAD currently operates and maintains an International Organization of Standards (ISO) 14001 certified program, “Fence to Fence”. Contractor shall comply with all EMS program requirements.

Sec. 9 - Assignment of Environmental Compliance Designee (ECD): N/A on this project.

Sec. 10 - Competency Training for Contractor Personnel:

Contractor shall not allow personnel to perform any activities and/or tasks on AMC installations (SIAD) without proper and adequate qualifications or job competency training. In the event of any identified noncompliance, the Contractor shall, if requested, provide proof of contract personnel training or qualification (individual name, training/qualification type, training/qualification certificate, and date of training/qualification) to perform those contract activities associated with the identified noncompliance.

Sec. 11 - Generation of Solid Waste:

Contractor shall dispose of all solid waste generated, which cannot be recycled, into the appropriately marked solid waste containers and roll-offs provided. Contractor shall comply with the SIAD Integrated Solid Waste Management Plan.

11.1. Contractor shall make every effort to divert construction, demolition debris, and all other solid waste to comply with the Army Integrated Solid Waste Management Policy.

11.2. The Contractor shall coordinate with the installation Qualified Recycling Program (QRP) and Solid Waste Managers, DGR, and COR to arrange for recyclable materials to be removed and diverted from the waste stream.

11. 3. Submit in writing the quantities of waste removed and recycled to the DGR and/or COR on a monthly basis. The submittal shall include the date of disposal/recycling, the disposal/recycling facility, the types of material disposed/recycled and the quantities of materials disposed/recycled by weight or volume.

11. 4. The Contractor shall promote cost-effective waste reduction in all operations and facilities covered by the contract. This includes collection, separation, and processing products or other materials recovered from solid waste streams for use in the form of raw materials.

11. 5. The Contractor shall make maximum effort to reduce and prevent waste.

Sec. 12 - Generation of Hazardous Waste: N/A on this project.

Sec. 13. - Use of Hazardous Materials: N/A on this project.

Sec. 14. - Prevention of Storm Water Pollution: N/A on this project.

Sec. 15 - Storm Water Management Low Impact Design/Development (LID): N/A on this project.

Sec. 16 - Use of Pesticides: N/A on this project.

Sec. 17 - Protection of Work Site Resources: N/A on this project.

Sec. 18 - Prevention of Spills: N/A on this project.

Sec. 19 - Protection of Sensitive Areas: N/A on this project.

Sec. 20 - Corrective Action for Noncompliance:

Contractor shall, when given a verbal and/or written notice of environmental noncompliance or nonconformance by the COR, take immediate corrective action. Failure or refusal to comply promptly may be grounds for the Contracting Officer to invoke the appropriate contractual remedies. This may cause all or part of the work to be stopped immediately until satisfactory corrective action has been taken.

Sec. 21 - Noise: N/A on this project.

Sec. 22 - Mercury: N/A on this project.

Sec. 23 - Universal Waste / e-Waste Management: N/A on this project.

Sec. 24 - Pollution Prevention / Hazardous Waste Minimization: N/A on this project.

1.21 Contract Additions and Deletions: The Government reserves the right to add or delete items from the contract, subject to their change in use. Resulting contract price adjustments will be negotiated based upon costs in place at that time and are identical per contract performance period. The Authorized Contracting Officer (ACO) is the only person that can make any changes (scope, costs or time) to the contract. Any changes made will be affective only after both the Contractor and the Government sign the revised contract.

2.0 PART II - PRODUCTS:

2.1 Contractor Supplied Materials: The Contractor shall supply normal industry standard domestic approved materials.

2.2 Minimum Requirements: All items shall be manufactures recommendations. Workmanship installation standards shall be that of a high quality commercial/industrial standard.

2.3 Government Supplied Materials: The Government shall supply any items described as “Gov.

supplied” in the Scope of Work in a timely manner to coincide with Contractors time line.

3.0 PART III - EXECUTION:

3.1 Performance Notification: The Contractor or their manager shall provide the TPOC by 0630am of each working day a Daily Project Report, to verify the project status, time delays, percent of overall completion, task completion status, adjusted completion date and any other issues directly related to the project completion. The information will be compared to the submitted Contractors schedule.

3.2 Calibration: The work will be done in a timely, workman like manner with a professional looking appearance and function.

3.3 Completion: The Contractor shall contact the TPOC to inspect installation of all components of this project.

3.4 Warranties: The Contractor shall provide a minimum of a one (1) year warranty on all work unless otherwise stated in the Scope of Work Items. Any manufacturer warranties shall be passed on to SIAD.

QASP

Performance Objective

Performance Indicator Performance Threshold

Method of Surveillance

PRS # 1. Period of Performance

(SOW Para C.1.3)

All listed scales shall be calibrated between 1 May and 31 May.

100% conformance to SOW meets expectations.

100% conformance is minimum expectations.

50% Observation

PRS # 2. Convert truck scale, manual to electronic.

(SOW Para C.1.3.10)

Convert 1 truck scale from manual to electronic operation

100% conformance to SOW meets expectations.

100% conformance is minimum expectations.

100% Observation

WAGE DETERMINATION

WD 15-5679 (Rev.-2) was first posted on www.wdol.gov on 01/03/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5679 Daniel W. Simms Division of | Revision No.: 2 Director Wage Determinations| Date Of Revision: 12/30/2016 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: California

Area: California County of Lassen **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.00 01012 - Accounting Clerk II 16.46 01013 - Accounting Clerk III 18.34 01020 - Administrative Assistant 23.69 01035 - Court Reporter 19.55 01041 - Customer Service Representative I 13.54 01042 - Customer Service Representative II 15.22 01043 - Customer Service Representative III 16.61 01051 - Data Entry Operator I 12.74 01052 - Data Entry Operator II 13.90 01060 - Dispatcher, Motor Vehicle 21.62 01070 - Document Preparation Clerk 15.67 01090 - Duplicating Machine Operator 15.67 01111 - General Clerk I 14.06 01112 - General Clerk II 15.35 01113 - General Clerk III 17.51 01120 - Housing Referral Assistant 21.80 01141 - Messenger Courier 11.66 01191 - Order Clerk I 13.77 01192 - Order Clerk II 16.29 01261 - Personnel Assistant (Employment) I 15.66 01262 - Personnel Assistant (Employment) II 17.52 01263 - Personnel Assistant (Employment) III 19.53 01270 - Production Control Clerk 20.88 01290 - Rental Clerk 14.77 01300 - Scheduler, Maintenance 17.48 01311 - Secretary I 17.48 01312 - Secretary II 19.55 01313 - Secretary III 21.80 01320 - Service Order Dispatcher 17.78 01410 - Supply Technician 23.69 01420 - Survey Worker 19.59 01460 - Switchboard Operator/Receptionist 14.53 01531 - Travel Clerk I 13.06 01532 - Travel Clerk II 13.87 01533 - Travel Clerk III 14.50 01611 - Word Processor I 14.86 01612 - Word Processor II 16.69 01613 - Word Processor III 18.66 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 23.47 05010 - Automotive Electrician 21.13 05040 - Automotive Glass Installer 19.65 05070 - Automotive Worker 19.65 05110 - Mobile Equipment Servicer 17.34 05130 - Motor Equipment Metal Mechanic 21.13 05160 - Motor Equipment Metal Worker 19.65 05190 - Motor Vehicle Mechanic 21.73

05220 - Motor Vehicle Mechanic Helper 17.34 05250 - Motor Vehicle Upholstery Worker 19.65 05280 - Motor Vehicle Wrecker 19.65 05310 - Painter, Automotive 20.49 05340 - Radiator Repair Specialist 19.65 05370 - Tire Repairer 14.76 05400 - Transmission Repair Specialist 21.13 07000 - Food Preparation And Service Occupations 07010 - Baker 13.19 07041 - Cook I 12.97 07042 - Cook II 14.58 07070 - Dishwasher 10.23 07130 - Food Service Worker 10.63 07210 - Meat Cutter 19.04 07260 - Waiter/Waitress 8.92 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.89 09040 - Furniture Handler 16.25 09080 - Furniture Refinisher 20.89 09090 - Furniture Refinisher Helper 16.81 09110 - Furniture Repairer, Minor 18.82 09130 - Upholsterer 19.04 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.89 11060 - Elevator Operator 10.89 11090 - Gardener 16.65 11122 - Housekeeping Aide 11.25 11150 - Janitor 11.25 11210 - Laborer, Grounds Maintenance 13.44 11240 - Maid or Houseman 10.25 11260 - Pruner 12.23 11270 - Tractor Operator 15.85 11330 - Trail Maintenance Worker 13.44 11360 - Window Cleaner 12.18 12000 - Health Occupations 12010 - Ambulance Driver 18.95 12011 - Breath Alcohol Technician 18.43 12012 - Certified Occupational Therapist Assistant 29.89 12015 - Certified Physical Therapist Assistant 23.73 12020 - Dental Assistant 18.09 12025 - Dental Hygienist 38.07 12030 - EKG Technician 33.03 12035 - Electroneurodiagnostic Technologist 33.03 12040 - Emergency Medical Technician 18.95 12071 - Licensed Practical Nurse I 19.81 12072 - Licensed Practical Nurse II 22.17 12073 - Licensed Practical Nurse III 24.72 12100 - Medical Assistant 16.51 12130 - Medical Laboratory Technician 18.61 12160 - Medical Record Clerk 17.50 12190 - Medical Record Technician 17.94 12195 - Medical Transcriptionist 20.90 12210 - Nuclear Medicine Technologist 42.22 12221 - Nursing Assistant I 10.39 12222 - Nursing Assistant II 11.68 12223 - Nursing Assistant III 12.74 12224 - Nursing Assistant IV 14.31 12235 - Optical Dispenser 20.25 12236 - Optical Technician 14.44 12250 - Pharmacy Technician 17.01 12280 - Phlebotomist 15.74 12305 - Radiologic Technologist 32.37

12311 - Registered Nurse I 27.63 12312 - Registered Nurse II 35.14 12313 - Registered Nurse II, Specialist 35.14 12314 - Registered Nurse III 40.94 12315 - Registered Nurse III, Anesthetist 40.94 12316 - Registered Nurse IV 49.04 12317 - Scheduler (Drug and Alcohol Testing) 27.37 12320 - Substance Abuse Treatment Counselor 28.97 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.37 13012 - Exhibits Specialist II 25.68 13013 - Exhibits Specialist III 32.35 13041 - Illustrator I 21.37 13042 - Illustrator II 25.68 13043 - Illustrator III 32.35 13047 - Librarian 29.32 13050 - Library Aide/Clerk 17.58 13054 - Library Information Technology Systems 26.48 Administrator 13058 - Library Technician 18.86 13061 - Media Specialist I 18.53 13062 - Media Specialist II 20.73 13063 - Media Specialist III 23.84 13071 - Photographer I 15.87 13072 - Photographer II 17.74 13073 - Photographer III 21.98 13074 - Photographer IV 26.88 13075 - Photographer V 32.53 13090 - Technical Order Library Clerk 16.12 13110 - Video Teleconference Technician 20.97 14000 - Information Technology Occupations 14041 - Computer Operator I 15.70 14042 - Computer Operator II 17.56 14043 - Computer Operator III 19.59 14044 - Computer Operator IV 21.76 14045 - Computer Operator V 24.09 14071 - Computer Programmer I (see 1) 22.61 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.70 14160 - Personal Computer Support Technician 21.76 14170 - System Support Specialist 21.24 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.62 15020 - Aircrew Training Devices Instructor (Rated) 39.42 15030 - Air Crew Training Devices Instructor (Pilot) 40.72 15050 - Computer Based Training Specialist / Instructor 29.62 15060 - Educational Technologist 34.68 15070 - Flight Instructor (Pilot) 40.72 15080 - Graphic Artist 22.58 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 46.08 15086 - Maintenance Test Pilot, Rotary Wing 46.08 15088 - Non-Maintenance Test/Co-Pilot 46.08 15090 - Technical Instructor 17.84 15095 - Technical Instructor/Course Developer 20.61 15110 - Test Proctor 16.24 15120 - Tutor 16.24 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 10.58 16030 - Counter Attendant 10.58 16040 - Dry Cleaner 12.77 16070 - Finisher, Flatwork, Machine 10.58 16090 - Presser, Hand 10.58 16110 - Presser, Machine, Drycleaning 10.58 16130 - Presser, Machine, Shirts 10.58 16160 - Presser, Machine, Wearing Apparel, Laundry 10.58 16190 - Sewing Machine Operator 13.70 16220 - Tailor 14.51 16250 - Washer, Machine 11.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.54 19040 - Tool And Die Maker 28.02 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.40 21030 - Material Coordinator 19.71 21040 - Material Expediter 21.66 21050 - Material Handling Laborer 14.54 21071 - Order Filler 14.13 21080 - Production Line Worker (Food Processing) 18.40 21110 - Shipping Packer 17.70 21130 - Shipping/Receiving Clerk 17.70 21140 - Store Worker I 13.51 21150 - Stock Clerk 17.54 21210 - Tools And Parts Attendant 18.40 21410 - Warehouse Specialist 18.40 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 28.08 23019 - Aircraft Logs and Records Technician 22.09 23021 - Aircraft Mechanic I 26.57 23022 - Aircraft Mechanic II 28.08 23023 - Aircraft Mechanic III 29.62 23040 - Aircraft Mechanic Helper 19.61 23050 - Aircraft, Painter 25.84 23060 - Aircraft Servicer 22.09 23070 - Aircraft Survival Flight Equipment Technician 25.84 23080 - Aircraft Worker 23.57 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.57 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 26.57

II

23110 - Appliance Mechanic 24.02 23120 - Bicycle Repairer 14.76 23125 - Cable Splicer 26.91 23130 - Carpenter, Maintenance 24.98 23140 - Carpet Layer 22.94 23160 - Electrician, Maintenance 28.17 23181 - Electronics Technician Maintenance I 22.36 23182 - Electronics Technician Maintenance II 25.06 23183 - Electronics Technician Maintenance III 28.00 23260 - Fabric Worker 21.52 23290 - Fire Alarm System Mechanic 24.95 23310 - Fire Extinguisher Repairer 20.25 23311 - Fuel Distribution System Mechanic 26.57 23312 - Fuel Distribution System Operator 21.51 23370 - General Maintenance Worker 18.24 23380 - Ground Support Equipment Mechanic 26.57 23381 - Ground Support Equipment Servicer 22.09 23382 - Ground Support Equipment Worker 23.57 23391 - Gunsmith I 20.25 23392 - Gunsmith II 22.76

23393 - Gunsmith III 25.31 23410 - Heating, Ventilation And Air-Conditioning 23.73 Mechanic 23411 - Heating, Ventilation And Air Contditioning 25.08 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.23 23440 - Heavy Equipment Operator 24.61 23460 - Instrument Mechanic 26.29 23465 - Laboratory/Shelter Mechanic 24.02 23470 - Laborer 12.78 23510 - Locksmith 22.98 23530 - Machinery Maintenance Mechanic 24.26 23550 - Machinist, Maintenance 20.64 23580 - Maintenance Trades Helper 16.61 23591 - Metrology Technician I 26.29 23592 - Metrology Technician II 27.47 23593 - Metrology Technician III 28.81 23640 - Millwright 25.31 23710 - Office Appliance Repairer 22.18 23760 - Painter, Maintenance 20.02 23790 - Pipefitter, Maintenance 29.31 23810 - Plumber, Maintenance 27.64 23820 - Pneudraulic Systems Mechanic 25.31 23850 - Rigger 25.31 23870 - Scale Mechanic 22.76 23890 - Sheet-Metal Worker, Maintenance 23.24 23910 - Small Engine Mechanic 18.48 23931 - Telecommunications Mechanic I 23.58 23932 - Telecommunications Mechanic II 24.88 23950 - Telephone Lineman 25.08 23960 - Welder, Combination, Maintenance 21.89 23965 - Well Driller 26.57 23970 - Woodcraft Worker 25.31 23980 - Woodworker 20.03 24000 - Personal Needs Occupations 24550 - Case Manager 16.71 24570 - Child Care Attendant 10.95 24580 - Child Care Center Clerk 14.96 24610 - Chore Aide 10.90 24620 - Family Readiness And Support Services 16.71 Coordinator 24630 - Homemaker 16.71 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.17 25040 - Sewage Plant Operator 26.94 25070 - Stationary Engineer 25.17 25190 - Ventilation Equipment Tender 19.01 25210 - Water Treatment Plant Operator 26.94 27000 - Protective Service Occupations 27004 - Alarm Monitor 24.00 27007 - Baggage Inspector 13.15 27008 - Corrections Officer 28.16 27010 - Court Security Officer 28.16 27030 - Detection Dog Handler 18.18 27040 - Detention Officer 28.16 27070 - Firefighter 22.91 27101 - Guard I 13.15 27102 - Guard II 18.18 27131 - Police Officer I 34.06 27132 - Police Officer II 37.86 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.76

28042 - Carnival Equipment Repairer 13.34 28043 - Carnival Worker 9.96 28210 - Gate Attendant/Gate Tender 14.77 28310 - Lifeguard 11.84 28350 - Park Attendant (Aide) 16.53 28510 - Recreation Aide/Health Facility Attendant 12.21 28515 - Recreation Specialist 20.48 28630 - Sports Official 13.66 28690 - Swimming Pool Operator 17.68 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 23.57 29020 - Hatch Tender 23.57 29030 - Line Handler 23.57 29041 - Stevedore I 22.09 29042 - Stevedore II 25.06 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 36.92 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.46 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.04 30021 - Archeological Technician I 18.02 30022 - Archeological Technician II 20.17 30023 - Archeological Technician III 24.55 30030 - Cartographic Technician 24.55 30040 - Civil Engineering Technician 22.23 30051 - Cryogenic Technician I 22.67 30052 - Cryogenic Technician II 25.04 30061 - Drafter/CAD Operator I 18.02 30062 - Drafter/CAD Operator II 20.17 30063 - Drafter/CAD Operator III 22.50 30064 - Drafter/CAD Operator IV 27.19 30081 - Engineering Technician I 16.00 30082 - Engineering Technician II 17.96 30083 - Engineering Technician III 20.10 30084 - Engineering Technician IV 24.88 30085 - Engineering Technician V 30.45 30086 - Engineering Technician VI 36.85 30090 - Environmental Technician 27.01 30095 - Evidence Control Specialist 20.47 30210 - Laboratory Technician 18.42 30221 - Latent Fingerprint Technician I 22.67 30222 - Latent Fingerprint Technician II 25.04 30240 - Mathematical Technician 26.12 30361 - Paralegal/Legal Assistant I 20.22 30362 - Paralegal/Legal Assistant II 25.06 30363 - Paralegal/Legal Assistant III 30.36 30364 - Paralegal/Legal Assistant IV 37.09 30375 - Petroleum Supply Specialist 25.04 30390 - Photo-Optics Technician 24.55 30395 - Radiation Control Technician 25.04 30461 - Technical Writer I 25.32 30462 - Technical Writer II 30.65 30463 - Technical Writer III 32.80 30491 - Unexploded Ordnance (UXO) Technician I 23.46 30492 - Unexploded Ordnance (UXO) Technician II 28.39 30493 - Unexploded Ordnance (UXO) Technician III 34.03 30494 - Unexploded (UXO) Safety Escort 23.46 30495 - Unexploded (UXO) Sweep Personnel 23.46 30501 - Weather Forecaster I 27.19 30502 - Weather Forecaster II 33.08 30620 - Weather Observer, Combined Upper Air Or (see 2) 22.50 Surface Programs 30621 - Weather Observer, Senior (see 2) 24.55

31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 28.39 31020 - Bus Aide 13.83 31030 - Bus Driver 18.74 31043 - Driver Courier 15.81 31260 - Parking and Lot Attendant 10.59 31290 - Shuttle Bus Driver 16.73 31310 - Taxi Driver 11.93 31361 - Truckdriver, Light 16.73 31362 - Truckdriver, Medium 17.92 31363 - Truckdriver, Heavy 22.69 31364 - Truckdriver, Tractor-Trailer 22.69 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 13.84 99030 - Cashier 10.48 99050 - Desk Clerk 11.27 99095 - Embalmer 22.74 99130 - Flight Follower 23.46 99251 - Laboratory Animal Caretaker I 11.38 99252 - Laboratory Animal Caretaker II 12.25 99260 - Marketing Analyst 23.08 99310 - Mortician 22.22 99410 - Pest Controller 18.07 99510 - Photofinishing Worker 12.53 99710 - Recycling Laborer 13.71 99711 - Recycling Specialist 15.81 99730 - Refuse Collector 15.41 99810 - Sales Clerk 14.32 99820 - School Crossing Guard 14.70 99830 - Survey Party Chief 29.98 99831 - Surveying Aide 20.22 99832 - Surveying Technician 21.98 99840 - Vending Machine Attendant 14.96 99841 - Vending Machine Repairer 17.92 99842 - Vending Machine Repairer Helper 14.96 Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures,…