Sandy Jon Boat Headwaters SOW Final.docx
DOCX document 32 KB Posted
- Attached to
- Jon Boat W/ Motor and Trailer
- Solicitation number
- W912ES25QA071
About this file
This document is a Scope of Work (SOW) for a Jon Boat procurement for the U.S. Army Corps of Engineers' Sandy Lake Dam Project Office. The solicitation (W912ES25QA071) requires a detailed boat specification including a 17'-19'6" aluminum semi-V hull boat with a 90 HP four-stroke engine, center console steering, hydraulic controls, and specific electronic features like side/down imaging sonar and a shallow water anchor. The boat must be delivered with a custom-fit single-axle trailer by October 30, 2025, to the project office located in McGregor, MN.
Key technical requirements include a minimum 7-person capacity, navigation lights, built-in fuel tank, powder-coated color options, and compliance with NMMA and U.S. Coast Guard flotation standards. The trailer must have radial tires, easy lubrication hubs, a heavy-duty winch, safety chains, and submersible LED lighting. The procurement is being conducted by the Department of the Army Corps of Engineers Engineering District St. Paul, with an amended solicitation date of September 18, 2025, which adjusted the delivery date and quote submission timeline.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment W912ES25QA0710001 SF 30.pdf | ||
| Solicitation Amendment - W912ES25QA0710001.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JON BOAT FOR MISSISSIPPI HEADWATERS PROJECT
SCOPE OF WORK
August 2025
EQUIPMENT PURCHASE
This procurement is for the Mississippi Headwaters, Sandy Lake Project Office and shall encompass a Jon Boat, motor, trailer, setup, and delivery.
SCOPE:
The contractor shall supply and deliver the jon boat to the Sandy Lake Dam Project Office, 222005 531st Lane, McGregor, MN 55760
SPECIFICATIONS:
Aluminum Semi-V hull Length 17’-19’6” Beam 7’ – 8’ 90 HP four stroke engine with aluminum or stainless-steel prop, with electric tilt and trim Center console steering - wheel w/hydraulic steering and throttle, tilt, and trim controls Minimum 18-22gallon built-in fuel tank Minimum 7-person capacity Minimum Transom Height 22” Minimum of 1 Bow and 2 stern eyes 4 tie-off cleats - placed on the port and starboard side of the vessel toward the bow and stern Navigation lights Tachometer and fuel gauge Powder coat green, gray, tan, or black paint color Bilge pump Floatation that meets or exceeds NMMA and U.S. Coast Guard Requirements Electronics:
· Side and down imaging sonar with minimum 10-inch display screen - installed
· Tablet holder for a 13” tablet device - Installed
· Shallow water anchor with dash control with an anchoring depth of at least 8 ft – installed
Trailer: Custom-fit trailer Single axle with radial tires Powder coated Easy lubrication hubs Pivot-up locking jack with swiveling wheel Heavy-duty winch w/nylon winch strap and bow safety chain Nylon tie-down straps Outboard motor support/transom saver Heavy-duty upright load guides Carpeted bunks Submersible LED lighting with either 4 or 7 pin connector Safety chains or cables Delivery Due Date: Delivery no later than 30-OCT-2025.
Shipment address U.S. Army Corps of Engineers Sandy Lake Dam Project Office 22205 531st Lane, McGregor, MN 55760
File details come from the government source that posted it. Updated .