W912ES22Q0022-0001 Amendment 0001.pdf

W81G6713543812

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment 0001 is to add information about the flange composition to the SOW

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 10-Jan-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912ES22Q0022

X 9B. DATED (SEE ITEM 11)

27-Dec-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

07-Jan-2022

CODE

CONTRACTING DIVISION

USACE - ST PAUL

180 FIFTH STREET EAST

SUITE 700

SAINT PAUL MN 55101-1678

W912ES 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912ES22Q0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 11-Jan-2022 11:00 AM to 14-Jan-2022 11:00 AM.

The following have been modified:

STATEMENT OF WORK

SCOPE OF WORK –Abrasion Resistant Spiral Butt-Welded Pipe

OPERATIONAL BACKGROUND

The abrasion resistant spiral butt-welded pipe will be used for the Dredge Goetz to span areas of sharp or abrasive objects (i.e., gravel, rocks, concrete, etc.) to transfer dredged material from the river to on offloading site.

SCOPE OF WORK

The Contractor shall provide 10 - 54 ft (54’-0”) sections and 10 – 46 ft (46’-0”) sections of abrasion resistant spiral butt-welded pipe with flanges on each end. The pipe must have plain square cut ends continuous run. The inside diameter must not be less than 20”. The outside diameter must be twenty-one inches. (21”) The wall thickness must not be less than three eights of an inch. (3/8”) The pipe shall contain the following typical properties:

_ Carbon: .30 - .35 _ Manganese: 1.00 – 1.50 _ Silicon: .15 - .30 _ Brinell Hardness: 160 – 190

The pipe shall have pipe flanges welded to each end of the pipe per the drawing below. The flanges shall be aligned end to end within ± 1°.

The flange dimensions & tolerances shall be in accordance with ANSI B16.5. The Carbon steel flanges mechanical properties and chemistry shall conform to ASTM A105.

The shipping charges shall be included in the quote. The vendor awarded the contract will be required to ship the pipe to the below shipping address by April 1, 2022.

Delivery and Installation Location Information:

The U.S. Army Corps of Engineers must have a least a week notice before the pipe is shipped.

United States Army Corps of Engineers Attn: Dredge Goetz 431 North Shore Drive Fountain City, WI 54629

Hours of Operation:

0730 – 1500: Monday – Friday Closed: Weekends & Holidays

Billing Address:

Adam Loven Plant and Facilities Engineer 431 North Shore Drive Fountain City, WI 54629 Office #: 651-290-5141 E-mail: Adam.F.Loven@usace.army.mil

On-site Supervisor’s and Technical Point of Contact’s:

Jacob Bernhardt Chief of Physical Support 431 North Shore Drive Fountain City, WI 54629 Office #: 651-290-5981 Work Cell #: 612-770-6455 E-Mail: Jacob.T.Bernhardt@usace.army.mil

Adam Loven Plant and Facilities Engineer 431 North Shore Drive Fountain City, WI 54629 Office #: 651-290-5141 E-mail: Adam.F.Loven@usace.army.mil

(End of Summary of Changes)