The file's text, extracted by GovTribe without its formatting.
U.S. Army Corps of Engineers – St. Paul District W912ES21R0004 – Presolicitation List of Test The laboratories used by the Contractor to perform sampling and testing under this MATOC shall be validated by the USACE Materials Testing Center (USACEMTC) for each test performed. The list of validated USACE-MTC laboratories and the tests for which the laboratories are validated can be found at https://mtc.erdc.dren.mil/searchvalidation.aspx. With each test report, the contractor shall provide the laboratory validation documentation that proves the laboratory is currently validated by MTC or ASHTO to perform the test. Certification documents by the American Welding Society (AWS) shall be provided for all weld test requirements.
Tests will include, but are not limited to:
| C-40 |
| Organic Impurities in Fine Aggregates for Concrete |
| C-117 |
| Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing |
| C-127 |
| Density, Relative Density (SpG), and Absorption of Coarse Aggregate |
| C-128 |
| Density, Relative Density (SpG), and Absorption of Fine Aggregate |
| C-131 |
| Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| C-136 |
| Sieve Analysis of Fine and Coarse Aggregates |
| C-142 |
| Clay Lumps and Friable Particles in Aggregates |
| C-535 |
| Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| C-566 |
| Total Evaporable Moisture Content of Aggregate by Drying |
| C-702 |
| Reducing Samples of Aggregate to Testing Size |
| ENG Form 4055 |
| Riprap Gradation |
| C-31 |
| Making, Curing and Testing a Set of 6 Concrete Cylinders for Cast-in-Place Concrete (includes A014, A015, A019, A020, A021 and A022) |
| C-31 |
| Making, Curing and Testing a Set of 10 Concrete Cylinders for Mass Concrete (includes A014, A015, A019, A020, A021 and A022) |
| C-31 |
| Making and Curing Concrete Test Specimens in the Field (Cylinder) |
| C-39 |
| Compressive Strength of Cylindrical Concrete Specimens |
| C-31 |
| Making and Curing Concrete Test Specimens in the Field (Beam) |
| C-78 |
| Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| C-138 |
| Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete |
| C-143 |
| Slump of Hydraulic-Cement Concrete |
| C-173 |
| Air Content of Freshly Mixed Concrete by the Volumetric Method |
| C-1064 |
| Temperature of Freshly Mixed Hydraulic- Cement Concrete |
| C-231 |
| Air content using pressure meter |
| C-42 |
| Obtaining & Testing Drilled Cores & Sawed Beams of Concrete, 0" to 8" deep |
| C-42 |
| Obtaining & Testing Drilled Cores & Sawed Beams of Concrete, 8" to 14" deep |
| C-42 |
| Beams with min 6 in2 cross section and min 21" long |
| C-805 |
| Rebound Number of Hardened Concrete |
| ASTM # |
| MASONRY, MORTAR, AND GROUT TESTS |
| C-780 |
| Evaluation of Mortars for Plain and Reinforced Unit Masonry (Annex 6) |
| C-1019 |
| Sampling and Testing Grout (one Test is three specimens) |
| C-939 |
| Flow of Grout for Pre-placed Aggregate Concrete (Flow Cone Method) |
| ASTM # |
| BITUMINOUS PAVING TESTS |
| D-140 |
| Sampling Bituminous Materials |
| D-1074 |
| Compressive Strength of Bituminous Mixtures |
| D-1188 |
| Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
| D-2726 |
| Bulk Specific Gravity and Density of Non- Absorptive Compacted Bituminous Mixtures |
| D-2950 |
| Density of Bituminous Concrete in Place by Nuclear Methods |
| D-5444 |
| Mechanical Size Analysis of Extracted Aggregate |
| D-6307 |
| Asphalt Content of Hot-Mix Asphalt by Ignition Method |
| D-6926 |
| Preparation of Bituminous Specimens Using Marshall Apparatus |
| D-6927 |
| Marshall Stability and Flow of Bituminous Mixtures |
| D-422 |
| Particle-Size Analysis of Soils |
| D-558 |
| Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| D-559 |
| Wetting and Drying Compacted Soil- Cement Mixtures |
| D-560 |
| Freezing and Thawing Compacted Soil- Cement Mixtures |
| D-698 |
| Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft- lbf/ft3 (600 kN- m/m3)) |
| D-806 |
| Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| D-854 |
| Specific Gravity of Soils |
| D-1140 |
| Amount of Material in Soils Finer than No. 200 (75-μm) Sieve |
| D-1556 |
| Density and Unit Weight of Soil in Place by Sand-Cone Method |
| D-1557 |
| Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft- lbf/ft3(2,700 kN-m/m3)) |
| D-1633 |
| Compressive Strength of Molded Soil- Cement Cylinders |
| D-2166 |
| Unconfined Compressive Strength of Cohesive Soil |
| D-2216 |
| Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| D-2434 |
| Permeability of Soils by Constant Head |
| D-2487 |
| Classification of Non-Plastic Soils for Engineering Purposes (USCS). See Note 1. |
| D-2487 |
| Classification of Plastic Soils for Engineering Purposes (USCS). See Note 2. |
| D-2488 |
| Description and Identification of Soils (Visual-Manual Procedure) |
| D-2937 |
| Density of Soil in Place by the Drive- Cylinder Method |
| D-2974 |
| Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| D-4220 |
| Preserving and Transporting Soil Samples |
| D-4253 |
| Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| D-4254 |
| Minimum Index Density of soils and Calculation of Relative density |
| D-4318 |
| Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| D-4373 |
| Rapid Determination of Carbonate Content of Soils |
| D-4380 |
| Standard Test Method for Density of Bentonite Slurries |
| D-4643 |
| Determination of Water (Moisture) Content of Soil by the Microwave Oven Method |
| D-4832 |
| Preparation and Testing of Controlled |
Low Strength Material (CLSM) Test Cylinders
| D-4944 |
| Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method |
| D-4972 |
| Determining pH of Soil |
| D-4959 |
| Determination of Water (Moisture) Content of Soil by Direct Heating |
| D-5084 |
| Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| D-6938 |
| In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
| N/A |
| Visual Inspection of Welds by AWS Certified Welding Inspector per AWS Standards |
| E-709E |
| Magnetic Particle Inspection of Welds by AWS Certified Welding Inspector per AWS Standards |
| E-165 |
| Dye Penetrant Inspection of Welds by AWS Certified Welding Inspector per AWS Standards |
| E-273 |
| Ultrasonic Inspection of Welds by AWS Certified Welding Inspector per AWS |
Standards
| E-1032 |
| Radiographic Inspection of Welds by AWS Certified Welding Inspector per AWS Standards |
D-412 D-532 Non-Metallic Hydrophilic Tensile Strength of Rubber
| COE CRD-C |
| Non-Metallic Waterstops |
| A-370 |
| Reinforcement Steel |
Tension Tests
AWS D1.4
Non-Destructive Testing of Welded Splices