W912ES-18-T-0043_0001_-_Solicitation_Amendment_1.pdf

W81G6780375106

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment 0001 is to add information to the SOW regarding the f ire rating of the doors required (A0). The amendment also adds three pictures of the current doors on the vessel, w hich are being replaced.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 8

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 15-Feb-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912ES18T0043

X 9B. DATED (SEE ITEM 11)

14-Feb-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-Feb-2018

CODE

CONTRACTING DIVISION

USACE - ST. PAUL

180 5TH STREET E SUITE 700

ST. PAUL MN 55101-1678

W912ES 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912ES18T0043

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

STATEMENT OF WORK

The U.S. Army Corps of Engineers – St. Paul District requires a contractor to supply four (4) marine-type stainless steel doors. The Corps’ Maintenance & Repair unit will install the doors on the Tender Lyon.

Doors shall be of stainless steel construction per the following specifications:

• Doors to be double-wall construction with internal bracing and blanketed with fiberglass inner-core insulation.

• Inner-core shall be reinforced along entire hinge rail, top rail and lock location.\

• Door and bracing to be TYPE 304, 18-8, 18 ga. Stainless Steel.

• Door hinge to be 3" open x 3/16" dia. pin, TYPE 304, 18-8, 16 ga. Stainless Steel full length piano hinge.

• Frame to be TYPE 304, 18-8, 14 ga. Stainless Steel. Frame to be four sided with mitered corners integrally welded and polished.

• Door stops shall be spring loaded neoprene gasket system on top, bottom and sides to assure thermal and acoustic protection for a demanding marine environment.

• All stop components, except gasket, shall be TYPE 304, 18-8 stainless steel.

• Welding of bracing to door panels shall be free of weld distortion.

• All visible stainless steel surfaces shall be polished to a #4 satin finish.

• Doors shall have a fire rating of A0 or better

• Fixed window shall be clear 1/4" laminated safety glass with 3" radius corners installed in door with weather tight rubber seal and stainless steel escutcheon.

• A 12-16” Stainless steel kick plate shall be installed on the lower interior of the door.

• Door shall come equipped with locking mechanism, crash bars to be installed on the interior of the doors.

• Doors shall be crated for shipment in a manner to protect the door from shipping damage.

Door Dimensions

Stern Engine Room door One (1) Single S.S. Marine Door w/ Frame & Hardware to fit: Rough Opening of 32”x 73”x 5” 28” High Fixed, Clear ½ Lite Left Hand, Reverse Bevel

Forward Engine Room door One (1) Single S.S. Marine Door w/ Frame & Hardware to fit: Rough Opening of 24”x 74 ½”x 5” 28” High Fixed, Clear ½ Lite Right Hand, Reverse Bevel

Port Pilot House door One (1) Single S.S. Marine Door w/ Frame & Hardware to fit: Rough Opening of 24”x 72”x 5” 28” High Fixed, Clear ½ Lite Left Hand, Reverse Bevel

Starboard Pilot House door One (1) Single S.S. Marine Door w/ Frame & Hardware to fit: Rough Opening of 24”x 72”x 5” 28” High Fixed, Clear ½ Lite Right Hand, Reverse Bevel

Delivery

Doors shall be delivered within 6 weeks of contract award.

Delivery address:

Fountain City Service Base 431 North Shore DR Fountain City WI.

Technical point of contact:

Keith Graham 651-290-5141 612-770-6455 cell keith.a.graham@usace.army.mil

The pictures below are of the doors being replaced on the vessel. 1. Engine Room Aft, 2. Engine Room Forward, 3. Pilot House

(End of Summary of Changes)